Trying to create PDF from Scan

I just loaded Adobe Acrobat Pro 9 on my new iMac. Everytime I try to create PDF from scanner it says the program had to close. What is going on here??? Please help me!!!
T

Did you install all the required components:
Front end
Backend
GETTEXT
and so on there are two others.
If so restart computer.
then go to control System preference and look for sane control panel and open up. look for list of scanners ans uncheck all but for your brand of scanner.
Close.
Then cycle off and on the Scanner either unplug power or unplug and plug the USB cable.
Now go to Acrobat and choose Document > Scan to Pdf and the select SANE.
Now when set up, you can set some of the other setup adjustments. when you get adjustments set push the scan button in lower left corner.

Similar Messages

Getting error when trying to create pdf from Word

How do I resolve this problem. When I try to creat a PDF from a Word file, I get an error saying that "pdfmaker is missing files"?

Start by opening word and printing the file to the Adobe PDF printer. Other than that, there is a lot of info missing in your post that is needed to answer. What version of WORD (32 or 64 bit), OS (32 or 64 bit), and version of Acrobat. It is likely that you have a combination that is not compatible for PDF maker. If so, your only choice will be the printer route.

Creating PDF from scan

What are steps for getting OCR of scanned document so I can edit it?
After scanning document, it opens in Acrobat but doesn't seem to be editable, only comment-able.
How can I get document to be a mix of text and suporting images that I can edit, change font, size, content, etc of text, and resize, alter images, etc.?
Adobe Customer Support mentioned something about exporting or opening Acrobat document in MS Word then saving as PDF, but I can't seem to figure out a way to do this.

Hi, Monique.
After recognizing (and saving) you can select the text and copy it as text (rather than graphic), right? Me, too. I'm running Acrobat 8 Pro.
But I've also been unable to actually edit the text in the PDF itself. Perhaps I'm missing something as well. Maybe someone else here will have some wisdom.
I've tried using the Touch Up Text tool from Tools-Advanced Editing; no joy. In Acrobat 8 Help I found this:
You can add or replace text only if the font used for that text is installed on your system. If the font isnt installed on your system but is embedded or subsetted in the PDF, you can make changes only to color, word spacing, character spacing, baseline offset, or font size.
Interestingly enough, I just tried this with a recognized-text PDF with Times font. I selected a character with the Touch Up Text tool, hit Delete, and the character remained. However, while I can still see the character in the document I can no longer select it with the Touch Up Text Tool. Hmm!

Create PDF From Scanner - always scans both sides, although default is set to front sides

Have Windows 7 (64 bit), Dell 2335dn MFP printer and Adobe Acrobat XI Standard.
Have set Configure Presets/Input/Sides to "front sides" both on the File menu and the "Create" on the toolbar.
If I do a "custom scan" it will print just one side, but from the Create/PDF from Scanner/Black and White option, it will always print both sides

I found the problem.
v9.9.0 Standard does not like TWAIN Drivers in the HP Scanjet 5590. It runs flawlessly on 5590 "WIA Drivers".
Thank you to all that tried to help.

"Create PDF from scanner" causes Adobe 8.1 to crash

Can anyone help us repair Acrobat 8? Or upgrade/reinstall Acrobat 9? We've got WinXP, running SP 3.
When we moved our PC to our new office, the create PDF from scanner function quit working, and now makes the entire program crash. We can still create PDFs other ways, but from scanner isn't working - the "Acrobat Scan" dialog box opens, but after about 5-10 seconds, the crash window comes up. Repairing, updating, uninstalling, and reinstalling the software all fail. Here are the errors for each attempt:
Repairing: "Preparing to install" dialog pops up but immediately disappears and no further action takes place.
Updating: It attempts to install update to 8.1.4, and the process begins, but after 5-10 seconds quits with error dialog "The installation process has encountered a problem. Please choose from the following options:" with 3 choices - run again, stop and start later, or cancel and quit. Selecting "run update again" just causes the error dialog to come up again. The other 2 quit the install entirely.
Uninstalling (via add/remove programs) and reinstalling (via downloading the software from the Order ID site again) both fail independent of each other with the same error: “The installation source for this product is not available. Verify that the source exists and that you can access it.”
We do a lot of scanning to PDF's ... how can we fix this? There've been no other PC problems whatsoever, otherwise ...
My name is Scott Knowles, tech support guy for my sister's PC ... whose account this is.

The scanner is an all-in-one printer, in perfect working order otherwise. Good idea though - I tried scanning *outside* the Acrobat software ... that proved the scanner software *is* faulty ... I'll repair that. Thank you !

Acrobat Standard 9.1.1 crashes on Create PDF from scanner

All options under the Create PDF from scanner sends Acrobat Standard 9.1.1 crashing.
Faulting application Acrobat.exe, version 9.1.0.163, time stamp 0x49a88b32, faulting module dlbatwds.ds, version 3.107.0.0, time stamp 0x45df4d3d, exception code 0xc0000005, fault offset 0x00004da2, process id 0xce4, application start time 0x01c9dca1b4c4360b.
Tried with both scanners CanoScan LiDE 600F and Dell 920A
I am using Vista Ultimate x64.Have tried turning off UAC and also tried running as Administrator.
No luck yet. Anyone have the same issue?

This might be a scanner issue. Have you tried scanning using other applications?
If not, can you try the following steps once?
1. Download TWACKER (Twack_32.msi) from http://www.twain.org/downloads.shtm
2. Install it.
3. Go to <Program files>\TWAIN Working Group\Twacker 32 and invoke Twack_32.exe.
4. Go to File menu > Select Source.
5. Select the TWAIN driver (not the WIA driver) for HP M1212nf and Click OK.
6. Now, invoke File > Acquire menu.
Please update with the result.

Acrobat 9 Quits When Create PDF from Scanner Selected

Hi. I wonder if anyone can advise please.
I have recently installed Acrobat 9 on my MacBook Pro and have plenty of RAM. However, I can "Create PDF from Scanner" just the once. After that, Acrobat quits when I select Scan or quits if I cancel the scan.
I have tried the following:
1. Troubleshoot System Errors & Freezes
2. New User account
3. Recreated Preferences
4. Booted from separate disk
5. Repaired disk permissions
6. Have no third party plug-ins installed
7. Have run Repair Acrobat
8. Changed Universal Access
9. Defragmented disk & repaired files
10. Safe Boot and reinstall Acrobat
Nothing has worked except when I clean install I can scan through Acrobat once.
I can scan from the scanner software - Lexmark 4850 - with a jpeg straight to Acrobat but want to try to solve the issue of scanning straight from the app.
Thanks for your help people.
Regards
Paul

After I discovered my problem of quitting after completing the scan of the first side of a 2-sided document and decided to go to Adobe for help, I should have known I was in real trouble after following their instructions for locating the Acrobat serial number. After bringing up the splash screen and clicking on it, instead of seeing the number the splash screen disappeared! So I had no option but to use the phone. Then their help person couldn't give me the serial number- he had to transfer me- and I chose to stay with him for help instead. He decided it was a conflict between the Acrobat & HP software and ended the help session.
I then did some on-line research and discovered others with the same problem, and came up with the comparison test with the Windows version. Adobe's phone system didn't recognize my Case #, but the second Help person said it worked fine. At that point, I got the feeling that I was in real trouble. After another hour going over the same ground and repeated denials that their software was at fault, the Helper refused my request that they do a Windows comparison test or send me a Windows version to test myself and promised to call me back with results of their "research". That call never came.
On the third call, again with the Case # unrecognized by the phone system, the Helper was even more unhelpful, probably after reading the record of the first two calls. He insisted on going back to the machine and over the same ground once again, and I ended the call.
I agree that the on line approach is better, and I may have to make a double call to get the serial number (neither of the two I have, each different on the case or on the CD worked) and try that if my request for a supervisor fails. Fortunately they are so incompetent that they can't track starting over.
I'm not a programmer, but have lots of varying experience with computers dating back to the first Atari-400. Since your Acrobat uses only the Twain driver component from your scanner software, the first place to look for a problem is in the Acrobat software, especially since the software doesn't run again after the first use without reinstalling, and the scanner continues to perform properly using it's installed software. The Windows comparison test such as Tim Whitfield was able to make, would clearly establish the Mac version of the Acrobat software to be at fault, but would still not resolve our problems. Unfortunately I hold out little hope for either you or I with Adobe, since neither their phone nor the online help has come up with a prior fix. This indicates a bug fix requirement, which for something like this looks to be a relatively long time in coming.

Creating PDF from Scanner with Brother MFC9700

Adobe Acrobat 9 Professional, latest version 9.1.2 (patched in the process of troubleshooting). We recently installed a new computer for this end user. She complained that Acrobat kept scanning the same page over and over again and only quit when clicking on Cancel. I tried it from both the auto-feeder and from the glass. Here is what I discovered as I did troubleshooting: I get 2 ways of creating PDFs from this multifunction printer/scanner. Neither are acceptable. If I choose the options of Native Mode and have it hide the native interface, the quality is good, but it keeps scanning the same page over and over again until you tell it to cancel. Checking the Prompt for new page box did nothing. If I choose Native Mode and Display the Native Interface, it only scans once, but the output is very pixellated, no matter the setting of image quality. There is only one scanner type option, WIA.
I downloaded the newest drivers and software, no help. Anyone have a clue as to what to try next?

Use the software that came with the scanner, save as TIF, then use Acrobat to convert the TIF to PDF

Create PDF from scanner using 8 and 10.5 or 10.6

Just curious what the solution is for Mac Acrobat when trying to create a pdf from your scanner.
I understand the Mac OS 10.5 + 10.6 changed it's twain support.
Once or twice I've create a pdf from a epson 1660 perfection scanner using Mac OS 10.4
Under File>Create PDF>From Scanner> and the list of scanners would show up.
I understand in 10.5 and 10.6 you can use image capture to achieve the same results. I like the acrobate interface which allowed the continuation of pages being scanned into the same file name.
Did adobe address this issue in future updates or product lines is is that feature gone for good.
Is there anyway using 10.5 or 10.6 using adobe 8, 9 etc... that allows for this process to happen again?

The 1660 Perfection scanner (which I have) is not a OS X native scanner, it is PPC code. If you want to run it under OS 10.5 you need to run Acrobat under Rosetta. I don't believe that option exists for Acrobat under OS 10.6

I recently updated to the latest Mac OS, and have lost the capacity to create PDFs from my HP scanner. Any suggestions?

I recently updated to the latest Mac OS, and in the process I seem to have lost the capacity to create PDFs from my HP scanner.
With each prior OS, I could scan and immediately save any scanned file in PDF format. Now it is not allowed, and creates a file
that has nothing but noise, even though the scan software seems to show that each scan is captured correctly (in the scan window,
before I ask it to save the file). When trying to save to PDF, I get a message that tells me that this is a read-only file, which I don't
quite understand, since the same scanning / saving process always created a PDF in the past.
iMac 27 inch----HP Officejet 7310
Any suggestions?

Thanks very much for the response. I checked for new HP software, and learned there is no new version. I also noted when reading about the new OS 10.9 that all driver software is now part of the MAC OS and no longer supplied by the vendor of the printer / scanner. I suspected this is where the trouble is located.....but I did not know how to ascertain what could be done to restore my PDF creation capabilities. The next message below yours had the solution, so all is well now. Now you know as well-----Many thanks again for taking the time to respond!!

Getting general error when saving site using "create PDF from"

I'm using Adobe Acrobat Professional 8.0.0 for Mac, trying to save websites. This started working fine, but I had to shut down in the middle of a site being saved. Now when I try to save a site using Web Capture/create PDF from I get a "general error, nothing was saved". What do I need to do, remove, replace, reinstall or whatever to get this feature working again?
Also can anyone tell me how to set the feature that saves web pages with the headers and footers showing date, time, URL, page title, etc. I often use the print feature (save to PDF) and up until a day or so ago it always saved with those headers and footers. Now they're missing, which is what prompted me to try saving entire sites, above. I remember setting these a long time ago and being able to choose what went on the left, right,header and footer, but I cannot find those settings now.
Thanks,
Michele

Well, after downloading Applejack, I am completely confused. I'm not sure I understand what will happen if I do any of these steps: see 3a.. "clean out all cache files including the Launch Services database and any cached User Pictures". What kinds of things will I lose? Can I choose only the Acrobat cache files? I don't want to have to spend hours or days resetting things as I'm in the middle of a project with a close deadline. I also don't really understand fully what will happen with all the other things they discuss. The instructions say (I just copied and pasted these):
3. Auto mode: You can let the script run through its tasks automatically by typing 'applejack auto'. If you want the machine to automatically restart at the end of its tasks, use 'applejack auto restart'. You can also tell the computer to shut down automatically at the end by using the command line 'applejack auto shutdown'.
3a. Deep Auto mode: If you want to let AppleJack clean out all cache files, including the Launch Services database and any cached User Pictures, use 'applejack AUTO' instead. Use this if you still have problems booting after running AppleJack already.
4. Interactive mode: To run through just one task, or to run the script manually, type 'applejack' and then choose tasks from the menu. Running the script in interactive mode has the benefit of giving you options for working with user level cache and preference files, not just the default system level caches and preferences. To select an option, type the highlighted number or letter associated with the action, and then hit return. Whenever you enter a choice in AppleJack, you will need to hit return for that choice to take effect.
4. Corrupted preference files are moved into a directory that will mirror the original preference directory, with (Corrupt) added to the directory name. For example, corrupt preferences files found in ~/Library/Preferences will be moved to ~/Library/Preferences (Corrupt). After running AppleJack, you'll probably want to take a look at them (and most likely throw out those folders). As of version 1.4.2, AppleJack now creates a copy of the directory tree inside the (Corrupt) folder so that if any files were deeply nested inside the original preference folder, they will be placed in an identical directory hierarchy in the new (Corrupt) folder. This way, if for any reason you would want to move a preference file back, you know where it should go.
6. AppleJack has a primitive logging mechanism. It writes a journal of most of its activity to /var/log/AppleJack.log. AppleJack will automatically reset the log the next time you run it, if the file should ever reach a size somewhat over 500k.

Question re Create PDF from Word doc

Hi
I am trying to create a pdf from a Word document (Word 2007, Acrobat 8 Professional), and am having lots of trouble with images,fonts and document overhead. With the fonts, i generate the PDF by saying Create Pdf from the plugin in Word. I specify in the Preferences that fonts are not to be embedded. I then open the PDF and access PDF Optimiser -> Audit Space Usage, and it says that fonts take up like 20% of the document, however there are only like 10 lines of text in Arial (9pt), and 6 titles also in Arial (Bold). I dont understand why Font is taking up so much space considering that i have elected not to embed fonts (if i go to the Fonts section in the Optimiser, it shows both embedded and unembedded panes blank).
With the images, i have 2 jpegs in the footer, that are compressed (JPEG -> Low). The other thing i am struggling with is the headers and footers, if i generate the PDF from the Word doc with Headers/Footers, then images take up over 15% of the document. Not sure if there is a way to add headers and footers within minimum impact of filesize? I have tried checking everything in the 3 categories of Dicard Objects, Discard User data and Clean Up. but the Document Overhead remains at 35%.
What else can i do to get these filesizes reduced?I have been researching this for days and have not come across anything that has helped.I have tried to PDF print, i have changed the font to like Courier, ensured no thumbnails or bookmarks, ensured JPEGs are not embedded in the doc, tried Save As, Save As under a different filename - basically anthing you can find on the net i have found and tried, but still cant fix this!!!! please, if anyone knows acrobate 8 better than me / or knows what the problem is, please advise????
Thanks very much.

The colors and size in a graphic needs to be done in a graphics editor. What type of editor would depend on the use of vector graphics versus bitmap. Sometimes vector graphics are larger than bitmaps if you are using a lot of lines that would display better as just a splotch of color. Such are the variations between vector and bitmap graphics, but important if you are looking for size reduction. For a bitmap, I would do the sizing and color depth with IrfanView, but you should be able to do that with PhotoShop if you have it. Vector graphics can be adjusted in Illustrator. The size of vector graphics is not an issue since they are scalable, but the size of a bitmap is important since your are looking at individual pixels and that depends on size. The point is that if you can adjust the color depth and size for the desired pixel resolution, the bitmap is optimized for the conversion to PDF from WORD.
As I mentioned, the smallest file size job options should minimize font storage in the PDF. Checking with the PDF Optimizer does not always give you all of the fonts. I am not sure why. It is better to check the font tab in the document properties to see what has been embedded. There is a preflight macro to embed fonts, you might check to see if there is one to delete fonts (I have not checked on that). Sometimes you can play with the reprint of a PDF, but that is not an option that is generally recommended, particularly if you have any tagging or such. Of course, tagging can really bloat a PDF, but is needed for a variety of reasons such as format for saving back to WORD (not a great workflow), accessability, and related issues. In another topic, there is some discussion of the purposes of tagging and bookmarks. However, the tags and bookmarks take space if that is really an issue for you. The latter are avoided if you use the print to the Adobe PDF printer and do not use PDF Maker in the PDF creation process. Again, there is a trade-off here in terms of size and functionality, particularly accessibility compliance.
Not sure I am helping as I run on, but sort what might be useful for you.

Acrobat 9 Pro - Create PDF from Word doesn't start

I have Word 2007 and Acrobat 9 Pro installed on Windows 7. I can print a Word file to PDF, but using Create PDF on the Acrobat toolbar does almost nothing. A dialog opens and asks what to name the file, but when I click Save nothing happens. The PDF Maker doesn't even start.
When I go into Acrobat and try to Create PDF from File and select a Word file, I see a message about "starting" but then I get "An unexpected error occurred. PDFMaker was unable to produce the Adobe PDF."
So I essentially have no PDF and no useful error messages to help me find the source of the problem. I've tried repairing the Acrobat installation, and even uninstalling and re-installing, all to no avail. My IT department has tortured me for a few hours trying all the basic stuff, but nothing has helped. I found this problem description in the Adobe Knowledgebase and I followed the steps there, but still nothing. (Yes, I have my name and initials set in Word's personalization settings. That was a dumb bug, wasn't it?)
Anyone had any ideas? I can create basic PDF by printing, but that doesn't give me a hyperlinked table of contents and other good stuff that I need.
Thanks for any help!
Steve

Hi Bill,
Can you tell me a little more about PDF Maker not working in Word? It worked fine for me on my Windows XP machine with Word 2003 and Acrobat 8 (or maybe 9). It sounds like you've had a different experience. I currently have version 9.3.1, but the updater is running right now to update that. Is there another way to install the updates besides with the built-in updater? I don't seem to have control over the order of the updates when I use it.
I will try turning off features to see what happens. It doesn't look like PDF Maker gets started, though, so I don't know if it's getting far enough to even load the list of what features are on/off.

Can't create PDF from most MS Office files, or combine

After behaving nicely for months, Acrobat suddenly won't create PDFs, either from the Acrobat menu or (for most) from right-clicking in Explorer. If I try File> Create PDF> From File, the dialog says it's looking for 'all supported formats' but doesn't show any of the files in the folder (not even .TXTs). It'll create a PDF from the right-click menu in Explorer, for only a very a few file types (for example, .docx but not .doc), and it won't do a Combine Files, either from Explorer or from the program, for any filetypes (says 'cannot convert file' on all filetypes).
This worked fine up til today and I have the same setup at work (AA 9 Pro and Office 2010) where it works fine. Tried doing a 'Repair' but no change. Starting to panic here. What went south? Thanks for any clues!

I said to print as a check, not to forget PDF Maker. The print is a temporary work around while you resolve the issue, partiuclarly if you are under time pressure. With versions before AA9, PDF Maker was simply a front end for the printer and when the printer was checked things might fail. So you get some trouble shooting of where the problem is. If you do not want to troubleshoot to see if everything is broken, that is fine.
The updates and repairs are other steps to take. A reinstall is typically a last resort and should include deletion of the Acrobat folder and running a cleaner on the registry after the uninstall.
Generally, if the PDF Maker in WORD does not work, then none of the other options to right click and create a PDF or creating a PDF directly in WORD will not work either. The whole point is to trace down to what is the major problem. Often folks have problems because the PDF Maker is not being recognized in WORD and has to be activated, but you have the icon and that suggests things should work.
Your next step is to check the job settings file. Be sure you have access to the job settings file. You will usually get an error message if this access is denied for some reason and posting the error is helpful.

How to include non web pages to the "Create PDF from Web Page" feature?

In Acrobat Pro (v. 10), when I use the "Create PDF from Web Page" feature, it works great for html pages, but it skips non-html links (doc, pdf, ppt, xls, etc). I need Acrobat Pro to convert those files and put them in the order as well. I don't see an option for this in settings. Is there ANY way I can do this? This is for an archiving purpose and I have 10,000 plus files to convert. Please help.

This is a question i'm trying to answer too. My issue is that I have a PDF file which itself contains links to both DOC and PDF files. The end result is that I need one consolidated PDF containing all the linked files (in order).
I can run the "create from web page" on this PDF file, and it'll download them, but not convert them. It just adds them as "jumbled" text to the end of the document. I need it to download, convert, and then append them.
So, as isunshine3 asked above, any way to have Adobe convert the files that it finds linked when running the "create from web page"?
THanks
Matt

Trying to create PDF from Scan

Similar Messages

Maybe you are looking for