Trying to edit the .js file again, but...I now have TWO .js files

RE: Putting a song into my iweb page, following Mike Wong's instructions with considerable and valuable help along the way from James Tseng.
I have spent all day working at this and failing countless times.
I finally got to the point where I was supposed to edit/change the .js file with the changes in height from 32 to 16, the controllers from true to false, the autoplays from false to true, and the loop from false to true.
Although I was not totally clear on what was going on, I slogged through it and had to re-do it and still have to re-do it because thus far the song is not on the page. Meanwhile, due to a townhall meeting that I went to, the site will be getting more visitors, and I want a song on that page.
MY QUESTION AT THIS POINT:
I have TWO .js files for that particular page in my iDisk. Shouldn't I have just ONE .js file? I started out with only one .js file and I worked on it and have no idea how TWO .js files got there with the .html files and all the others.
I was under the impression that if I changed something on that particular page and then republished, I would end up with a brand new fresh, up to date .js file. But No. I still have TWO .js files and at this point when I have to go back and re-do the information changes that I listed above, I do not know which .js file to pick.
Beyond that, I am disturbed (1) that I have TWO of those .js files, and (2) why, when I changed the page and republished, I did not end up with just ONE .js file, new and up to date and unburdened by the other two pages that may be wrong or who knows what.
If this is an omen that I should just quit tryingto put another song on my page, then maybe for now I will just relax and give it a rest. I do have ONE song on my page, but that was with a lot of hand-holding help and although I did take notes, I apparently did not take sufficiently good notes to see me through a solitary run.
I would appreciate any input on the issue of why I have two .js files and why republishing did not resolve said problem.
I don't feel that I should try to edit html on the wrong page.
Lorna in Southern California

Hi Lorna,
Somehow you duplicated your js file. No big deal;
but I don't know which one to tell you to delete.
Would it be a big deal to just republish your site
and start over?
.......... Lorna says ................................................
I just now did that. You can read my report in the post.
When you edit your js file with an editor, all you
will do is "Save" the changes. You're not going to
"Republish" the changes. Just click "Save" and
that's it.
.......... Lorna says ................................................
And that is exactly what i did! I clicked Save. Didn't get me my song on the page, though.
Assuming you have successfully converted/compressed
the audio file and that part of it is done, for now,
let's just worry about changing SIX WORDS in the js
file. That's all you need to do...republish the
thing and well get it figured out.
.......... Lorna says ................................................
I did. I selected the .js file. I opened it with Text Edit (learning so many new things.) I went thru all the text between thet two words <object and object>. And I clicked Save.
No song.
Lorna in Southern California

Similar Messages

  • I updated to OS X Mavericks but I now have two Pages and two Numbers icons in my Dock.   Both contain files and folders.  I am not convinced that Mavericks installed correctly, but what should I do?

    I updatd my MacBook Pro to OS X Mavericks, but I now have two icons in my dock for Pages and two for Numbers, both of them contain files and folders.   If I click the original Pages icon it says that there is an update available, if I then click to update the Itunes pages says no updates available.   I am not convinced that Mavericks updated correctly.  What can I do please.

    There are new versions of the iWork apps, but they have been completely re-written for Mavericks / iOS / iCloud integration. They are feature limited at this time, so Apple left the original versions on your Mac. They are in an iWork folder in the applications folder.
    Along with changes to the programs themselves, the file formats are different. Some things like Google and Dropbox think the file formats are viruses and blocks them (I don't know if that is still the case as I don't use either). So, you may want to continue to use the old versions.

  • I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0.  Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file ext

    I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. so I can reburn the films on a single BluRay disc. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file extensions on the VOB files to MPEG but this was no help. Some of the VOB files contain numerous film clips but my software does not appear to be able to recognize them as such. I need to know if replacing my old Premier Elements with the new Version 13 would solve this problem or not. Any advice would be greatly appreciated!
    Bob

    Bob
    What do you have now.....
    What computer operating system do you have?
    We can go into the finer points of source and your intentions, but for now it would appear that you are using SD 4:3 source media to get to a HD 16:9 result. Lots to discuss in this regard.
    What was given to you on the DVD disc? DVD-VIDEO 4:3 or something else?
    If DVD-VIDEO on DVD disc, you should expect to find on the disc a folder named VIDEO_TS. That is your target for your video files.
    If you were given a DVD-VIDEO on DVD disc, then all you want from it are the video files, specifically
    VTS_01_1.VOB, VTS_01_2.VOB, and so on through that series until possibly getting to
    VTS_02_1.VOB, and so on. How many files you have beyond the VTS_01_1.VOB file will depend on the size of the DVD-VIDEO.
    Does the above scenario apply to you?
    The alternative might be someone giving a DVD disc (data disc) which contains just the VTS files mentioned which were copied from
    the VIDEO_TS Folder. So, you do not get the whole VIDEO_TS Folder, just the essential video files. Does this scenario apply to you.
    I see no need to replace your Premiere Elements 4 with a later version unless you have a huge project and need a later version that will be a 64 bit application running specifically on Windows 7, 8, or 8.1 64 bit computer.
    Consider...Premiere Elements 4 and if you have DVD-VIDEO on DVD....
    1. Place the DVD disc in the burner tray
    2. Open Premiere Elements 4 and set the project preset for NTSC DV Standard (assuming you are working in a NTSC setup)
    3. Go to
    Get Media
    "DVD, Digital Camera, Mobile Phone, Hard Drive Camcorder, Card Reader"
    "Adobe Premiere Elements - Media Downloader" and its Advanced dialog.
    Set the Source in the latter dialog for the drive which has your DVD disc inserted in its tray
    You should see your VTS_01_1.VOB thumbnail in the "Adobe Premiere Elements - Media Downloader" Advanced dialog.
    With this VOB selected, click on Get Media to get the file from there into the project.
    Should work fine.
    Complications may be involved if the people who processed your footage gave you something other what is described above.
    Please review and consider, and then we can plan our project strategy accordingly.
    Thank you.
    ATR

  • Oracle Linux 6.6 I tried to edit the /etc/resplv.conf file on nano, gedit and VI but the result doesn't appear on the file when I cat it

    Oracle Linux 6.6 I tried to edit the /etc/resplv.conf file on nano, gedit and VI but the result doesn't appear on the file when I cat it

    Hi ! do you mean the file /etc/resolv.conf ? This file should be by default in the /etc/ diretory and contains the dns-name resolutions. http://linux.die.net/man/5/resolv.conf http://www.tldp.org/LDP/nag/node84.html http://en.wikipedia.org/wiki/Resolv.conf

  • I am trying to edit my creative cloud account but the link is broken

    I am trying to edit my creative cloud account but the link is broken
    I am trying to close my creative cloud subscription.

    Hi Jeff,
    Yes I have a case number. I have chatted with chat more than 3 times with zero results, and I have also tried calling, but I can't get phone support for BC.
    This email is in response to support case #0210384334
    and I got this from the chat:
    Your request (# 15756) has been created by our support staff.
    I also got this email below. There's no way to reply to the email to let them know that I'm still having trouble. And when I click this link:
    Adobe Support Portal online
    I get a "413 Header lenght too long" error.
    (The below is the email I was sent and I don't know the "box" they are referring to...
    This is to inform you that you need to enter this link in the box.
    http://www.adobe.com/products/business-catalyst.html?promoid=IMJKY
    Thank you
    This email is in response to support case #0210384334
    We haven't heard from you in a while on this case and we would like to know how things are going. If your issue is still unresolved, please let us know so that we can assist you further.
    You can do this by visiting the Adobe Support Portal online to view your case history or send us information on your ongoing case. Look for your case number in the "recent activity" section. Should you need to send us additional information, you can do so by opening the case and submitting your update.
    If you have difficulties logging in, consult the Adobe ID and Membership FAQ.
    If we do not hear from you within 4 days of receiving this notice, we will assume that your issue has been resolved and will close the case.
    You will have up to 14 days after the case is closed to reopen it if you have additional concerns.
    Thank you,
    Adobe Customer Care

  • IMovie: When i put in music for the background of my clips, my clips go quieter, but then when i take the music out it goes loud. I tried to edit the music to try and make it go quiet like background music would, but it isn't working?

    In iMovie on my new MacBook Pro. I'm editing a video of mine (As i make videos for YouTube), i put in the clips, then i put in background music. But when the music is there, the clips go really quiet. I'm trying to change that but it isn't working, i've edited the clips to make any other sound go quiet on the audio bar, but that hasn't worked either. I've tried to edit the music to go quiet on the audio bar, but that didn't work. Nothing is working!! It's like the music is taking over! You can barely hear the sound of the clips talking. Then after the background music has finished, if there is any clips left over, the clips go really loud!
    It's geting me really annoyed, i've tried everything.
    Can anybody help? Even suggestions would work!

    I'd be posting in the iMovie forum for iMovie help.

  • I saved a file on my mac on Word, but today when I went to review it, it said the "document could not be found" and then asked if i wished to locate the file myself, but when I went to do so it said the same thing again. How do I find this file?

    I saved a file on my mac on Word, but today when I went to review it, it said the "document could not be found" and then asked if i wished to locate the file myself, but when I went to do so it said the same thing again. How do I find this file?

    Let's go out and come in again!
    What version of Word on what Mac running what version of OS X?
    Did you give the file a name? In what location did Word last save a file - because that is where it is likely to be.

  • Iphone 4s touchscreen stops responding after a minute or so, I then have to wait at least a minute before the touchscreen works again but soon after it stops responding. I have tried hard reset, turning it off over night, etc

    Iphone 4s touchscreen stops responding after a minute or so, I then have to wait at least a minute before the touchscreen works again but soon after it stops responding. I have tried hard reset, turning it off over night, etc

    Hello,
    I had that problem as well and the apple support suggested to turn off the LTE-mode to have a running system and try to exchange the micro-sim by my provider.
    THAT was not an option!
    BUT it seems to solve my problem in the following way after trying a lot of possibilties:
    In the menue properties/help (don't know the exact english word, because I run my phone in german)
    I switched on the nice feature 'flash LED' by incomming calls, msgs, and push infos.
    Today the flash feature was responding to different push notes very slowly.
    By switching this feature off the LTE-mode-tochscreen-not-responding-problem disappeared.
    We tried this on a other iphone, not having the metioned problem, and switched the LED-flash:
    the problem appeared. Switching the LED-flash off: problem disappeared!
    It seems to be a bug that the LED will hint Calls and MSGs in combination with the LTE mode!
    treated my phone very hard today to double check, but its still ok.
    @Apple:
    Please fix that issue in the next update.
    Hope, this helps you guys as well.

  • When i go to install creavtive cloud it says check the connection, try again but however my connection is fine and i've tried my friends connection and the same thing keeps happening  HELP!!!

    when i go to install creavtive cloud it says check the connection, try again but however my connection is fine and i've tried my friends connection and the same thing keeps happening  HELP!!!

    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • My wifi usually automatically hooks up my other home's wifi, but i went away for a while and it hasnt connected so i tried to put the password in again, and it said it was connected but then it just lets it go. And it is refusing to work.

    My wifi usually automatically hooks up my other home's wifi, but i went away for a while and it hasnt connected so i tried to put the password in again, and it said it was connected but then it just lets it go. And it is refusing to work.

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

  • I accidentally removed the application, trying to download a trial version again, but the Adobe installer keep saying it is update and do nothing. what am I going to do?

    I accidentally removed the application from my Mac by moved it to trashcan. trying to download a trial version again, but the Adobe installer keep saying it is update and do nothing. what am I going to do?

    Run the cleaner tool and reinstall.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Mylenium

  • HT1645 I did step 2 but my computer isn't giving me the pop-up in step 3 so i can't push an OK button.  I waited 15+ hours for it to burn and it sent me to this page.  I have tried to change the encoding settings again, and it adjusts the capacity but no

    I did step 2 in the "iDVD:  Setting Encoding preferences" but my computer isn't giving me the pop-up in step 3 so i can't push an OK button in regards to the message.  I waited 15+ hours for it to burn and it sent me to this page.  I have tried to change the encoding settings again, and it adjusts the capacity but no message pop-up appears.

    You can undo your permission changes. Probably the most relevant one is cookies. Try one or both of these methods:
    (1) Page Info > Permissions tab
    While viewing a page on the site:
    * right-click and choose View Page Info > Permissions
    * Alt+t (open the classic Tools menu) > Page Info > Permissions
    (2) about:permissions
    In a new tab, type or paste '''about:permissions''' and press Enter. Allow a few moments for the list on the left to populate, as this information needs to be extracted from a database.
    Then type or paste ''rcn''' in the search box above the list to filter it to the most relevant domains. When you highlight a domain, you can adjust its permissions in the right pane.
    Any luck?

  • How to install windows 7 on my macbook pro mid 2009 using usb. right now aim using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me

    how to install windows 7 on my macbook pro mid 2009 using usb. right now iam using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me.
    Iam new to coding. please help me.

    try the solution posted by kunu here and report back
    https://discussions.apple.com/thread/5105056?tstart=0

  • I'm trying to open the latest i-tunes but it keeps saying I need quick time 7.5 or higher

    I'm trying to open the latest i-tunes but it keeps saying I need quick time 7.5 or higher (which I do) and I have no updates available for quicktime

    QuickTime 7.5.5 for Leopard - http://support.apple.com/kb/DL27
    QuickTime 7.7 for Leopard - http://support.apple.com/kb/dl761
    = New version of Quicktime installed but application reports it needs to have that version installed =
    Open Application > Utilities > System Profiler and check the Quicktime version in Frameworks vs. the version in Applications.  One person had re-installed their operating system.  It had kept the newer Player application but had reverted to an earlier version of the underlying support framework files which many applications utilize.  Re-installing Quicktime 7.7 took care of the problem.  Do this manually, not with Software Update.
    Installation get stuck at "configuring installation" - https://discussions.apple.com/thread/2592979?threadID=2592979  - uninstall Quicktime before installing.

  • I am trying to organize a zip file with a bunch of links and files. But when I drag an image file to a folder, it always "Snaps to grid" instead of just landing where I put it.

    I am trying to organize a zip file with a bunch of links and files. But when I drag an image file to a folder, it always "Snaps to grid" instead of just landing where I put it. All of the files are going into the same zip file but I want them visually in the space that I put them and not at the bottom of the snap to grid folder location they are looking like.  I am trying to  drag and drop files in groups so that I can group them for now, but image files always do their own "sort by" when I drag them from my web pages. Links don't do it though.  I tried resetting the folder, and deleting the DS files. No luck.

    You keep asking variants on this same question. You've had replies in all your other threads. If you can't find them, go here and click where it says Activity:
    Thomas Cannon Jr.

Maybe you are looking for

  • Interview questions on upgrades from 4.7 to ECC

    Hi, Can any one please post some potential areas/questions that will be asked for upgrade projects from 4.7 to ECC6.0 Points will be awarded. Thanks

  • Hard Drive filling up: SubmitDiagInfo, /private/var & log issues

    This topic is part question, part help for people I've seen having a similar problem in other threads. My issue is different enough from the other issues, that I wanted to post it as a separate topic. I've had about 24GB of available space for weeks

  • Smartform Problem in Displaying a string data

    Hi Friends,                  I am facing a problem while displaying a string data in smartform. Actually it is a one of the field's data in an internal table. It is a STRING field type of length 0. While populating in an internal table it is having a

  • Checking for duplicate files

    i have a full hard drive, I think that i have duplicate copies of movie files that i can't see, How do i find them?

  • Reg: HU2 System

    Hi All, Can i use HU2 system as a sand box to learn ABAP and functional like fico...? I think the system is for navigation, testing....etc Regards, Venu V