Trying to install CS 5.5 on new macbook pro laptop (10.8.3) and having trouble :(

hi there!  i'm trying to install CS 5.5 Design Premium on my new macbook pro.  i have the original dvds *with the serial number* but this new laptop doesn't have a dvd driver SO, i've downloaded the CS 5.5 files from the adobe site and i was hoping during the installation process i could plug in the serial number and everything would be fine.  but when i click on the "install" file, i get this message:
" "Install" can't be opened.  You should eject the disk image."  what am i doing wrong??  what can i do??  thanks a lot   -alicia

Remali80 the installation files are likely corrupted please try downloading the installation files again.  What location did you download CS 5.5 Design Premium from?

Similar Messages

  • I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

    I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

    Yes, gladly. I am trying to install on a 13" MacBook Pro with OS X 10.8.3. I insert the disk into the SuperDrive. The I work '09 window pops up with two icons: one Tim install and one that says "Read before you install iWork." I double-click on the "Install iWork '09" icon, and a window appears that says, "This package will run a program to determine if the software can be installed." I click "continue" and see "Welcome to the iWork '09 installer." I click on "Continue." The "read me" bullet on the left lights up, and I see "Read before you install. . . ." I click "Continue," then see the software license agreement. When I click on "Continue" again, I am asked to agree, and I do. The window then says, "Standard Install on 'Mackintosh HD" and indicates how much space the program will take.
    I click "Install," enter my password, and the installation begins. It goes through a validating phase and begins "writing files." It indicates that installation will take about 30 minutes (although that number fluctuates). After about four minutes it goes to "cleaning up." Then after just a few seconds, the "Summary" bullet on the left lights up and this message appears: "There were errors with the installation. You may want to try installing again." There is a large yellow triangle with an exclamation point in it, and a bold "The installation failed." Below that appears "The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."
    At that point, a "Close" button is pulsating blue at the bottom of the window.
    Sorry for the tedious detail. Anything revealing there?
    Thanks!

  • Hard drive crash on our iMac with CS4. Adobe has deactivated it from that computer and I need to download/install it onto our two new macbook pro computers

    How do I download/install CS4 on our two new macbook pro computers? I have the discs but no disc player on the macbook pro computers?

    Hi AnnieMay1,
    I have done the necessary changes you will now be able to use the serial number.
    Thanks
    Kapil

  • While trying to instal Mountain Lion OS on my macbook pro, I got the error message that my HD was damaged and it reverted to my Lion OS. Why does this happen? I bought the OS online through the app store

    While trying to instal Mountain Lion OS on my macbook pro, I got the error message that my HD was damaged and it reverted to my Lion OS. Why does this happen? I bought the OS online through the app store.

    The Mountain Lion installer looks at your internal drive to make certain that it's error-free before continuing installation. You should have an application named "Install OS X Mountain Lion.app" in your Applications folder now so you shouldn't have to download it again. Do this...
    Boot to your Lion recovery partition by holding down both the Command and the R keys while booting. Open Disk Utility from the Recovery partition and select your hard drive (usually named "Macintosh HD" unless you've renamed it) and click on Verify Disk. If you come up with any errors, click on Repair Disk. At the end of the cycle you will get a message that the disk was successfully repaired or a message that the hard drive could not be repaired.
    If you're able to repair the disk, just reboot as normal and open the "Install OS X Mountain Lion.app" and the installation will proceed. If Disk Utility was unable to repair the disk, you need to get to your local Apple Store as soon as possible so that they can see if the disk is salvageable or beyond repair.
    Good luck,
    Clinton

  • Im trying to install windows 7 in on my macbook pro, i thought it just install like intel based PC, so i use windows 7 DVD, i format the harddisk, and installation failed. When i reboot, OS X is missing, because i've format my harddisk. So what should ido

    Im trying to install windows 7 in on my macbook pro, i thought it just install like intel based PC, so i use windows 7 DVD, i format the harddisk, and installation failed. When i reboot, OS X is missing, because i've format my harddisk. So what should i do to make my MBP is with windows 7

    Thanks for all of your help!  Big time!
    Guys, I been in the business working on PC and MAC for years. So I am not green at this, I was looking for some kind of option to get past the boot loader..  Which is failing. 
    I know how to boot into these modes.. Done tons of research before posting and couldn't find anything.
    It will not go into  Internet Recovery, or any thing else.  I hear the sound .. then that is it.. I get nothing else..
    I have tried clearing the NVRAM which is Option + Command + P + R
    Still nothing..
    So I thought I would try here to see if maybe there was some trick out there someone might know of that would work.
    What else guys?  I am hitting th keys right..

  • Does anyone maybe know why the new Macbook pros don't have iWeb and how i can install it. My Macbook already came with the iLife thing, but it seems to only have iMovie, iPhoto and Garage Band. is there any way that i can install iWeb?

    Does anyone maybe know why the new Macbook pros don't have iWeb and how i can install it. My Macbook already came with the iLife thing, but it seems to only have iMovie, iPhoto and Garage Band. is there any way that i can install iWeb?

    Apple discontinued iWeb. That's the case for over a year now.
    Topics in this forum will tell you that in order to install iWeb you have to find a copy at eBay, Amazon and similar places.
    Or here

  • Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.   When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

    Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
    When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
    I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
    However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
    So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
    Can I fully change the name without doing a complete re-install of Lion and all my apps?

    One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

  • Are there any new Macbook pro laptops coming out soon?

    Are there any new Macbook pro laptops coming out soon? Because if there are i will wait to buy one.

    Applecomputer53 wrote:
    Are there any new Macbook pro laptops coming out soon?
    There are always new MacBook Pro models coming out soon. However with current 2011 models you can install the faster, Rosetta program loving OS X Snow Leopard with a hack, instead of the new clitchy and unstable OS X Lion.
    So you have a choice now, but for not much longer. If you wait another 6 -8 months, Lion will be stable and more programs will be compatible with it.
    If this is your first Mac, I would wait. If you can do a simple hack with another Snow Leopard Mac, then you can opt to get one now and revert it to Snow Leopard and have a stable machine.
    Else take your chances with Lion.

  • Can i use my ext hard drive USB 2 on the the new macbook pro laptops with a USB3

    can i use my ext hard drive USB 2 on the the new macbook pro laptops with a USB3

    stephan ach wrote:
    but i read that there are lots of problems with the new macbook pro. i  have all my data on ext. la cie hard drive. i wont have a problem reading them?
    What problems specifically? If you have a problem you should start your own thread and explain the problem in detail.
    External USB devices including hard drives and DVD work fine on the new Macbook Pros.

  • I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing.  There is a check box selecting "picture" which has been checked - but no picture.  This worked fine on OS10.7.5.  Problem??

    I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing.  There is a check box selecting "picture" which has been checked - but no picture.  This worked fine on OS10.7.5.  Problem??

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • HT1386 I have an 80 gig ipod classic. I have a new Macbook Pro running 10.8.2 and I can't get my current podcasts to sync onto my iPod. I have restored the ipod and dragged the current podcasts to the add list to no avail. What is up?

    I have an 80 gig ipod classic. I have a new Macbook Pro running 10.8.2 and I can't get my current podcasts to sync onto my iPod. I have restored the ipod and dragged the current podcasts to the add list to no avail. What is up?

    I have an 80 gig ipod classic. I have a new Macbook Pro running 10.8.2 and I can't get my current podcasts to sync onto my iPod. I have restored the ipod and dragged the current podcasts to the add list to no avail. What is up?

  • Hi, I have just purchased a new Macbook Pro. Whenever I try and buy anything on the internet (via Safari) on any website it will not allow me to add products to checkout. Has anyone else experienced this problem or can suggest a fix? Many thanks!

    Hi, I have just purchased a new Macbook Pro. Whenever I try and buy anything on the internet (via Safari) on any website it will not allow me to add products to checkout. Has anyone else experienced this problem or can suggest a fix? Many thanks!

    On all shopping sites, or only some? What happens when you try?

  • Cannot install GoLive 8.01 0n new MacBook Pro/Snow leopard

    Purchased a brand new MacBook Pro (with the new Snow leopard) so I could leave my house and still work.
    The most important application I use is Adobe golive CS2 8.01.
    I have the 6.0 disk, and the upgrade registration number but they will not install in the MacBook Pro/Snowleaopard. I've tried 50 times. It will allow an install of the 6.0, but says my registration number is invalid for the upgrade.
    Adobe doesn't support the product anymore on any level. I'm beside myself. The laptop is worthless to me without that application.
    I've tried replacing the keylogin, prefs reinstalls etc... nothing.
    I'm desperate. If anyone has any ideas, please help.
    g
    Regards,
    George Edgar Joyce III
    JoyceMedia

    George Edgar Joyce III wrote:
    hang on a second...
    GL CS2 and ( both work on snow leopard. Matter of fact Adobe LiveMotion works on Snow leopard! Howe3ver, you cannot open your se\aved documents... still working on this too....
    but, GL works great with SL....on my desktop, golive was already installed when I upgraded to snow leaopard... works great...
    I doing a clean install on the laptop..that's where I'm stuck...
    wonder is you upgrade with GL INSTALLED ON YOUR LAPTOP...IT SHOULD STILL WORK...
    let me know if you try it..
    i'm thinking of downgrading the OS on the laptop, install GL and then upgrade back to SL... too much freakin work!
    g
    Downgrading, install GL, then upgrade sounds like a good move. Let me know if it works... if you do it. I understand the frustration of having to go to all this trouble. I've had my share of problems lately. First my MBP hard drive went bad. Had to reinstall everything. Then I took it on a trip so I could keep up with client work, and it died again. Took it to Apple in Portland, Maine. They had to ship it off for repairs again. This time the Logic Board and Video Display. Now my G5 is acting up again. Often too busy to deal with it.
    I'll follow along to see how things go for you. Keep us posted if you would.

  • Install Flash from CS5 on new Macbook Pro errors

    Hi,
    I just tried to install my CS5 Master Collection on my new MacBook Pro. All the programs installed properly except Flash Pro. I understand why I have errors for Flash Player but the rest, I'm not sure how to move forward to get this installed. I tried opening Flash Pro anyway but it tells me to reinstall. I have tried 2 times now.
    Any thoughts? I know I'm missing something or am I screwed since I'm using a Mac, which hates flash and CS6 is out on top of that factor?
    Exit Code: 6
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 5 error(s), 2 warning(s)
    WARNING: Higher version plugin already exists at: /Library/Internet Plug-Ins/Flash Player.plugin
    WARNING: Not installing plugin to: /Library/Internet Plug-Ins/Flash Player.plugin
    ERROR: 21 Unable to copy file from "/private/tmp/.tempdirhZ5oDAIp/Assets1/AppFiles/en_US/Configuration/Libraries/Sounds.fla" to "/Applications/Adobe Flash CS5/en_US/Configuration/Libraries/Sounds.fla" Error 0
    ERROR: 21 Command ARKCopyFileCommand failed.
    ERROR: The following payload errors were found during install:
    ERROR:  - Adobe Flash CS5_AdobeFlash11-en_USLanguagePack: Install failed
    ERROR:  - Adobe Flash CS5: Failed due to Language Pack installation failure
    Thanks!

    http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  • How do I install Adobe Flash on my new Macbook Pro 2013?

    I just purchased a MacBook Pro laptop today and I have attempted to download Adobe Flash on the computer - installation says it is complete but when I visit websites the flash still does not work. I am completely new to Mac - am I doing something wrong?

    1. Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        Quit Safari.
        Restart computer. Relaunch Safari.
    2.  Enable Plug-ins
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.
        Press " Manage Website Settings" button for more options.

Maybe you are looking for

  • Summary Options Open iTunes when iPod is Connected

    Open iTunes when this iPod is connected is grayed out under iTunes Summary Options. Anyone know why? how to enable? is it the result of some other preference? Some file I need to delete? Running Windows 7 64-bit iOS 4.3.5 iPod Touch 4G 32GB Just did

  • How to connect to postgres server

    I need to connect to a postgres server using jdbc. I don't know the parameter for my Class.forName() or anything that could help me connect to the server. Could someone help me about this problem. thanks a million

  • No data selected in data source 2LIS_04_PECOMP

    Hi SAP BI Experts, We are facing issues while extracting data from infopackage u201CFULL / 2LIS_04_PECOMP InfoCube 0PP_C08u201DData source u201C2LIS_04_PECOMPu201D. We have deleted the erroneous data from cube 0PP_C08 date range 26.02.2009 to 2.03.20

  • Change domain name clients and server

    Hello, I want to change the domain name from eg ".vancouver.gov" to ".vancouver.local" on all of our devices in the network. Zcm has been installed with ".vancouver.gov" and the clients also are registered with ".vancouver.gov". When i change the dom

  • Unable to view bill on Verizon FIOS website

    Everytime I login to the Verizon website and try to view my bill or view my voice mails, etc I get the following message: "We are unable to process your request at this time. Please try again later. We apologize for any inconvenience." This has been