Trying to set up Directv GenieGO using Airport Extreme.  Getting error message: DHCP range entered conflicts with the WAN IP Address of your base station.  How do I resolve the conflict.

Trying to configure an Airport Extreme manually.  After I enter the IP Address of the GenieGo along with the rest of information required I am getting the following error message when I click update:
DHCP range entered conflicts with the WAN IP address of your base station. 
How do I resolve the conflict? 

You cannot use the same range on LAN and WAN if you are routing.. it must be different.. and you should not be routing at all.
The AE should be in bridge mode. NO DHCP settings at all.

Similar Messages

  • Trying to connect Verizon wireless router to Airport Extreme but error says Ethernet unplugged.

    Trying to connect Verizon wireless router to Airport Extreme and error says Ethernet Unplugged.

    So, AirPort Utility running on the Windows Vista desktop can "see" the AirPort Extreme and displays its icon, but gives that error message at some point in the setup process? How far does it get?
    Other questions that may help me (or somebody else) understand your problem better:
    Which of the pieces were verified as working before the introduction of the AirPort Extreme?
    Did you have the desktop computer attached to the Verizon GT704WGB with one of the Ethernet cables you are now trying to use? Which one? Have you tried the other one to be sure it also works?
    Are you using the same port on the GT704WGB? Have you tried another one?
    If the desktop has multiple ethernet ports, are you using the same one?
    Had you done any special configuration of the ethernet port on the Verizon GT704WGB to get it to work with your desktop?
    What category ethernet cable are you using? 3? 5? 5e? 6?

  • Hi, I'm trying to set up my Time Machine, but I get this message: The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again. how to resolve?

    Hi, I'm trying to set up my Time Machine, but I get this message: The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again. how to resolve?

    Did you reboot the TC? That is always the first step.
    Reboot the whole network if that is not enough.
    If you still have issues.. come back to us but generally the best way is to factory reset the TC and start over.
    We need a bit more info on the whole network layout and what OS you are running. What model TC you have??

  • HT201210 I'M TRYING TO UPDATE TO IOS 6 BUT I KEEP GETTING ERROR MESSAGE sOFTWARE UPDATE fAILED: AN ERROR OCCURRED DOWNLOADING IOS 6

    I'M TRYING TO UPDATE TO IOS 6 BUT I KEEP GETTING ERROR MESSAGE sOFTWARE UPDATE fAILED: AN ERROR OCCURRED DOWNLOADING IOS 6

    I Tried for three days to download iOS 6 and kept getting error 1403. I finally went to the apple store and they couldn't figure it out either.
      I finally got it to download and all I did different from the other 100 times was I went into settings and on the Bluetooth setting I put NO.  Not sure if that's what did it but that was the only thing different that I did.

  • I am trying to activate new itunes card. I am getting error message: The code you have entered has not been properly activated. Does this mean the store did something wrong or me?

    I am trying to activate new itunes card. I am getting error message: The code you have entered has not been properly activated. Does this mean the store did something wrong or me?

    Yes, the store didn't properly activate the card. If the store is nearly then you could try going back and asking them to do so, if it isn't (or if they can't/won't help) then try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

  • Trying to download Photoshop CS3 for Mac but keep getting error message  (HTTP ERROR: 404 /support/downloads/dlm/main.jsp, RequestURI=/support/downloads/dlm/main.jsp)

    Trying to download Photoshop CS3 for Mac but keep getting error message  (HTTP ERROR: 404 /support/downloads/dlm/main.jsp, RequestURI=/support/downloads/dlm/main.jsp)

    Jessicawaters are you trying to download from Download CS3 products?  If so then please try a different web browser.

  • I'm trying to load video file into CS6 I keep getting error message: 'Could not complete you request because the DynamicLink Media Server is not available.' No Idea what to do next. Help please.

    I'm using CS6 Extended. My OS is "Windows 7 home premium.
    Can no longer load video files into CS6 for edited I keep getting error message:
    'Could not complete your request because the DynamicLink Media Server is not available.'
    Don't know what this means. Until just now I was able to load videos without any problems. Now I'm getting this message. Any thoughts?

    Hi Mylenium,
    upfront:
    I hope I won't be marked as spam now, since I am posting on a few relevant discussions now to this topic.
    However, I really would like to ask the people who have experienced this problem to see if they were able to solve it.
    Now the real deal:
    I posted a question in this discussionDynamicLink Media Server won't let me import video for video frames to layers anymore.
    The linked discussion is a lot younger, which is why I posted there first.
    I also put in information on the steps that I have tried and my computer specifications.
    I am experiencing this problem for a while now and hope you and jones1351may be able to help out.

  • Trying to open PDF getting error message " there is a problem with Acrabat /Reader. Please exit Adob

    I have windows XP, when I am trying open PDF getting a error message " there is a problem with Acrabot /Reader. Please exit Adobe Acrabat/Reader Please try again'  It was working earlier today  HELP

    If all else fails, you can try one of 2 things (I will assume you are talking about Reader - though this is not the Reader forum). Use ctrl-alt-del to go to the task list. Kill AcroRd32.exe. Then try again. If that does not work, a reboot will probably solve the problem.

  • Trying to restore/update 3rd gen ipod touch - keep getting error message - THe ipod touch could not be restored. An unknow error occurred (-1). Please help.

    Please Help..
    Trying to restore / update ipod 3rd generation - keep getting error message - The ipod touch could not be restores. An unknown error occurred (-1).

    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    The "device may need service" means a hardware problem. in that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I'm trying to add a new domain and I'm getting error message.

    Hi,
    I'm trying to add my new domain name and I'm getting error message that says: 'Cannot add domain because this domain already exists. Please delete the domain and I already deleted it along with all the 'A Records', 'CNAME Records (Alias)', MX Records',  and 'Advanced DNS Records'. I have a ton of new fans coming to the site tonight. Help!!!

    Did you ever setup another trial BC site before and attach that domain name?  I'm pretty sure that if the domain name is attached to BC's nameservers already even if it's under another account then it won't work.  Not 100% sure about it but it's a likely culprit.  Try to type the subdomain you are adding into a browser and add "/admin" and see if you can login to BC-- if it's an old site you had setup then you should remove the subdomain from that account first and then try to add it to your newer BC site.

  • I cannot print wirelessly to Canon PIXMA 560 using Airport Extreme and Vista PC.  Printer worked fine with Netgear previously.  With USB from printer direct to Laptop it will print.  The printer is definitely set up correctly to acknowledge the router.  W

    When I connect the printer to the Airport via USB and run Bonjour, it recognizes that I have a Canon printer but does not have the mp560 as one of the choices.
    I spoke with Apple support but they could not help...they said they thought it was a Windows issue and that it had something to do with one of the ports needing to get "unstuck" or something like that...this is really annoying because while the Airport is so much better than the Netgear it defeats the purpose of having the wireless printer, which worked so well previously.
    Can anyone offer advice?  Thanks.

    Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the  AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers. 
    To see if your printer is compatible, take a look at thisiFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
    Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

  • I'm trying to set up my Facetime but I'm getting a message that says my registering device does not have appropriate credentials

    I'm trying to set up my Facetime on my laptop but I'm getting an error message that says my registering device does not have appropriate credentials. How can I fix this?

    katharina,
    The specific circuit board I was talking about is the "Logic Board" which should have the serial number of your computer embeded electronnicaly.  Sometimes the technicians who replace this board do not bother to enter the computer's serial number into it after making the repair/replacement.  Probably because they don't think that it is important.  The only way you can have this done is to bring it back to the shop where it was repaired, and have them do it. On some Macs you can check the electronic serial number by clicking on the Apple logo on the top left hand corner of the screen, then clicking on "about this mac" then clicking on "more info" button on the window which will appear.  If you can't see any serial number, then your replacement board was not serialized.

  • I am trying to import subtitles to Adobe Encore but am getting error messages...

    I am trying to import subtitles from a software called Aegisub to Adobe Encore, but i am receiving this error message:
    The software that is used to decode the media is not available on this system. Installing the correct decoders for the files you are working with may help to correct the problem.
    I have exported the subtitles as an Encore text file but it still won't allow me attach these to my video. I have exported the video from Premiere as an H.264 and that slots into Encore just fine, i just need to use Encore to attach the subtitles.
    Can anyone tell me what i might be doing wrong?
    Thank you.

    Thanks Stan. I think this is probably the answer but seeing as i am doing this at work, it is telling me the action was stopped because it needs to be checked by an administrator.
    If i manage to succeed, i shall let you know. I was trying to import as an asset, wrongly, so this is probably going to be the solution.
    Thank you

  • Getting error message when trying to add apple id to facetime and imessage, getting error message when trying to add apple id to facetime and imessage

    When I try to add my Apple ID to Facetime or iMessage, I get an error message "username or password is incorrect " even though its the same username and password I use for everything else.
    anyone else getting this problem?

    The Order has got 5 lines. First 4 lines are product lines and the 5th line is a service.
    We have a customized form called mass order change which will bring only the product lines when we query a order. We usually do the mass update of shceduling date
    and promise date in that form for all the order lines or for some perticular lines in that order.
    For one order when i tried to update the scheduling date and promise date its showing this message. Not sure why??.. i have checked the form logic and the package which this form is using but all of them are calling the standard API process_order to change the sales order. I found out that This message is a standard Oracle message : OE_SCH_OVER_ATP_NO_SCH_ACT. I tried to find this message in process_order API but could'nt find this message. status of these 4 lines are : Awaiting Shipping
    Thanks and Regards,
    Ragni Gupta
    Edited by: 921176 on Jan 21, 2013 5:17 AM

  • Airport Extreme 802.11ac manual DHCP range

    I have one of the new Airport Extreme 802.11ac units, and am running airport utility 6.3 on my server.
    I am trying to setup my network but I would like my own DHCP range instead of 10.0 or 192.168 - I would like to add 10.20,  This way it wont conflict with my other network for work which has 10.0 and my IP TV Network which is 192.168.  I would like to add a manual address for my home netwok so I can add a vpn to avoaid the conflits.
    Is there anyway of adding my own DCHP range in the new extreme?
    Thanks
    Greg

    It isn't possible to change the first two octet values other than what apple has already allowed.. ie 10.0, 172.16 or 192.168
    That is how Apple build their stuff.
    I have no idea if this would work.. but someone else suggested the idea.. export the configuration of the AE .. you will find that is available via the top menu.. then open the xml file that is produced and do a search and replace for 10.0 to 10.20 or whatever you want.. save the file.. and import it back to AE.. it is crude windows sort of operation but it worked to change dhcp messages for the poster.

Maybe you are looking for