Trying to understand message redelivery

Hi,
I'm trying to understand redelivery.
I'm using JMS to sync user data from our J2EE system with our Lotus Domino system. I want to be sure that in the advent of any failure in this the sync-ing process, a notification is sent to ensure that at least the Notes Domino stuff can be sync-ed manually by an administrator.
So my question is how to be sure to capture and send notification of EVERY failure with the information needed to manually sync if needed?
As I understand it, it's my responsiblity to ensure that I handle all Exceptions in the onMessage() method of our MessageListener implementation - without throwing any new Exceptions. I do this so I'm confident that things like a Notes Session not being instantiated, or a Notes document not being found are handled and notifcation sent. The result is that if an Exception occurs at this level, I handle it and as far as JMS is concerned the message was consumed and got acknowledged. Right?
But what about messages that fail before the MessageListener is reached - presumeably a problem with the JMS provider (we're using WebLogic 6.1). Can I just rely on JMS to redeliver failed messages and not worry about them? Is there a recommended way to test such failure so I can be sure what happens? I tried throwing a RuntimeException in the onMessage() method, but I did not observe any attempts to resend the message and when I browsed the queue it was empty.
So as you can you see, I'm unclear about this! Appreciate and clarifying points!
Terrence

You can rely on the JMS provider to take care of it's own failures. However, please note that the JMS provider can fail right after you have successfully done your work in onMessage - but before the message acknowledgement happens. This means that in case of failure, you may get the last consumed message again.
Also note that different JMS providers will handle RuntimeException's raised from onMessage differently, so check your vendor's documentation. After a couple of re-tries, your JMS provider might for instance deem that the receiver/subscriber has a problem consuming said message and move the message into an error queue.
- Bjarne.

Similar Messages

Trying to understand message size

I sent a 23Mb file containing several PDFS
This sent a 33Mb file
24186474 + (all other bits 24513 inc logo, text & message)
Mime size 33130371
I'm trying understand why !...

bhrt60 wrote:
>
> I sent a 23Mb file containing several PDFS
>
> This sent a 33Mb file
>
> 24186474 + (all other bits 24513 inc logo, text & message)
>
> Mime size 33130371
>
> I'm trying understand why !...
That's how MIME works. With the encoding, attachments increase in size
by roughly 33%. This is true regardless of the e-mail platform.
As a side note, this also then impacts setting attachment size limits.
Taking your example, a limit of 30 MB would actually have blocked the
message even though the attachment was only 23 MB because with the MIME
encoding it was actually 33 MB.
Your world is on the move. http://www.novell.com/mobility/
We know what your world looks like. http://www.novell.com/yourworld/

Trying to understand daemon message

Hi ,
trying to understand message see in the logging log -
DAEMON-3-SYSTEM_MSG: netsnmp_check_tcp_session_for_user : Cache found for user (username).
Thanks

You can rely on the JMS provider to take care of it's own failures. However, please note that the JMS provider can fail right after you have successfully done your work in onMessage - but before the message acknowledgement happens. This means that in case of failure, you may get the last consumed message again.
Also note that different JMS providers will handle RuntimeException's raised from onMessage differently, so check your vendor's documentation. After a couple of re-tries, your JMS provider might for instance deem that the receiver/subscriber has a problem consuming said message and move the message into an error queue.
- Bjarne.

Trying to understand Android OS updates delays

This is not another hate mail, it´s more about trying to understand the facts and motives regarding the OS updates (or lack of).
Hopefully this material will arrive at someone from Sony with enough power to do something about it.
Ever since I can remember, Sony has been THE brand for electronics. I can´t remember a TV or VCR in my house that it wasn´t Sony, and they lasted for LOTS of years.
When a couple years ago I finally had the money (and the need) for a Smartphone, i chose the X10 Mini, which is a great little phone from a great brand, but it´s stuck at Android 2.1... which makes it a crippled android nowadays...
It really bothered me the lack of OS updates, so I chose to buy a Galaxy Nexus, but it´s really expensive in my country. So my second option was a Galaxy Ace 2, but they haven´t arrived to my country yet, so I went with my third option: Xperia Sola, knowing beforehand that it´s a great phone, a great brand, but I might get slow OS updates.
I bought it about 10 days ago when I saw they were starting to roll out the updates.
10 days later I still don´t have my update. And not only that, but I don´t see much light at the end of the tunnel...
I found a thread with the SI numbers that were updated, and there were a bunch on Oct 1, another bunch on Oct 4, and one code on Oct 8, and no other update since...
I also read that those who did get the update, were having bugs with the OS, and also found threads from other Xperia models, whose updates began rolling 3 months ago, and there is still people who hasn´t gotten the update...
As a customer, and a owner/CEO of a small company, I have a really hard time understanding how a HUGE company like Sony can be making such mistakes...
I have been thinking objective reasons, and I can only think of one. I know it´s a wild guess, but I´m starting to think that our salvation might be the very thing that means our condemnation: CYANOGENMOD!!!
Think about it: Why would Sony spend more money hiring twice as much programmers, when they can make only one update per phone, and sit down and see how CM releases begin to appear, for all tastes and needs. And... IT´s FREE!!!
Also, if there is a software related problem (way more likely than a hardware problem), then the CM developers take the fall, instead of Sony. And I´m beginning to see custom OS installers that are more user friendly, so it might be something that they take in accout when neglecting OS updates.
If that´s the line Sony is following, it´s a very risky move and it won´t work. Sony Mobile will crash and burn, but it´s still a better business plan that "let´s get lazy and make ULTRA slow updates so we don´t spend a lot of money programming".
If you can´t afford more programmers, stop including so much bells and whistles and make your OS near vanilla. Include a couple of Xperia menus, a custom theme and voila!
The main reason I wanted the Galaxy Nexus is Vanilla OS, which means inmediate OS updates. Sony on the other hand, takes a year or two to release it after its launch. If they release it at all...
Another though... why not stop making that many different phones! Really! There are like 5 Xperia models i can´t tell one from the other... even with specs side by side!
You are trying to make too many phones and you are failing with all of them! (Software and software updates are also part of the phone, one of the most importants...)
I know hiring programmers is expensive, but you are sacrificing one of the most expensive values for a company EVER: Customer credibility! Which as you know better than me, takes years to create.
If Apple had problems with carriers and code aprooving and stuff, they might get away with it, becouse they alone have all the devices. If iOS 6 is delayed a few months, it´s delayed for everyone, and besides Apple fanboys rarely complain about Mac products, but Android is a more independent and educated market.
I´m not saying that Apple users are ignorant, not at all, but I´m pretty sure most iPhone owners don´t even know what processor or how much RAM their phone has. They just "swallow" the Apple Way of Life. (it´s a good phone becouse Apple says so).
The Android user on the other side, because of the fragmentation of the market, has many brands and models to choose from. An Android user about to buy a new phone will most likely go online looking for different models, specs, reviews in webs and forums...etc.
You can´t say "I don´t know how HTC and other companies get their updates so soon, but we take a lot more becouse Google and the Operators must aproove the code.", because there are many other brands that have exactly the same difficulties or more, since they are smaller, and we can SEE online that they are indeed delivering solid and relativly fast updates.
Did we miss something? Does HTC use Witchcraft to get their code aprooved?
My underlying point is this: You are getting lazy... VERY lazy with software programming for your phones, and WE KNOW IT!
It´s not the "difficulties" you claim, becouse every brand has those difficulties.
This isn´t 1999 you know. We are in the information age. If you lie to us and tell us that your phones have the latest OS, I can go online and see that you don´t (Hello!!!). If I see that the company lies to it´s customers, I will stop buying their products. If I´m so dissapointed with how Sony handles OS updates and their customers queries about it, then I want for the first time ever to sell my Cell Phone becouse I´m not happy with it, or the brand behind it.
We also live in the "Here and now" age. You can´t expect your customers to read about new Android releases on news and blogs, and wait YEARS with arms crossed waiting for their update... The world doesn´t work like that. Not anymore at least...
It´s not a matter of how many recources you have, it´s about how you use and balance them. GIVE MORE IMPORTANCE TO SOFTWARE UPDATES! IT´S WAY MORE IMPORTANT THAT YOU THINK! LISTEN TO YOUR CUSTOMERS!!!
You guys are Sony are smart and design great products, but you are not GOD! You are not our wife, no one has sworn alliagence to you.
If you stop giving us good products and start lying to us, we hate you and stop giving you our money. Simple as that.
My sola is beatiful, I love the design, the screen, the hardware... but it hasn´t been updated yet to 4.0, not to mention 4.1, which REALLY is the latest version... so stop advertising that your phones have the latest Android OS, unless you want angry customers switching to other companies, which you are getting.
I also read some stories that Androind 4.0 was announced for the Xperia PLAY, and then it was called off... Do you have any idea how pissed I would be and ripped off I would be if I bought my phone based in that information and then you say it won´t be available?
Well, actually right now my possition is worse, since you SAY you will update my phone, but you don´t say when, and I read online about people still not getting their updates months after the rollout started, so I´m in the limbo right now...
As a company, one of the worse things you can do is calling your customers stupid, and when I see the answers you give in this forum, then I feel insulted. I feel like they are talking to an idiot or ignorant person with the so called "diplomatic" answers, which are basicly empty excuses for not doing your job right.
You gave us the frikking CDs, DVDs and Blu-Rays!!! Don´t tell us you can´t tweak an already built OS in a year!
I really hope you change their OS update policies really soon, before you lose the already small cellphone market share you have, or at least change your P.R. and C.M. policies towards a more open one.
We all are humans and make mistakes, but we customers really appreciate honesty and truth.
Have an open conversation with your customers! Don´t lie about your shortcomings! Accept then and ask the community to help you solve them, ask them what they biggest problems are, what features are most important to them, how often do they expect updates... LISTEN TO THEM!!
"Succes is a meneace. It tricks smart people into thinking they can´t lose."
Ps: Nothing personal with the mods from this forum, I´m not killing the messenger, I know that you can ONLY give the info you are allowed to give, and even if you wanted, you probably don´t know the answers yourself, since you work in the Communications department, not Developement or anything technical, and if you can't give any given info, then they probably won´t give it to you either... My message is to the company as a whole. I just hope you will be a good messenger and give this to whoever needs to read it.

My bad, it´s closer to 40 the number of phones released hehe
I know it´s all about money, and I know Sony is obligated to neglect users who haven´t given them money after an x ammount of time. However, it´s not a matter of making the phones obsolete earlier, so the users want to buy a new phone faster and therefore getting more money.
A person will buy a new phone when he/she has the money to do so and wants to do so.
It´s not a matter of WHEN. It´s a matter of WHAT.
The question is not "When will that user buy a new phone?", but rather "When that user buys a new phone, whenever that is, what phone will it be?"
I have a love/hate relationship with Apple. I would never use a iPhone. I would love having any Mac, if someone gives it to me, but I would never spend my harn earned dollars on such an overpriced piece of hardware over general principals.
However, i do recognice that Steve Jobs was a business genius. Weather you like or love his ideas and methods, he turned a garage project into the biggest company in the world, with a market value higher than Exxon with 1/3 of it´s assets.
Apple is a money making machine, and that is where the "hate" part of my relationship comes from.
However, it surprised me a lot to see that they released iOS 6 for the iPhone 3GS, released in 2008!
That get´s you thinking, that inside all that "SELL NOW" culture Apple is, they also support their older devices that people bought years ago but can't buy a new phone now. However, when they can do it, it will surely be another iPhone. Because they FEEL that the company listens and cares for them.
Also if you jump from iOS 6 on the 3 GS to a brand new iPhone 5, the transition will be virtually non-existant, except for Siri and a couple of features.
However jumping from Android 1.5 or 2.1 to Jelly Bean, might not be so easy on some users, making them more likely to give iPhone a shot.
Since they have to adapt to another phone anyway, they might as well try the apple...
And for old users, it gives people a sense of continuity and care about the user. Otherwise we feel like being kicked out of a restaurant right after we payed the bill.

Trying to understand the basic concept of object oriented programming.

I am trying to understand the basic concept of object oriented programming.
Object - a region of storage that define is defined by both state/behavior.
( An object is the actual thing that behavior affects.)
State - Represented by a set of variables and the values they contain.
(Is the location or movement or action that is the goal that the behavior is trying to accomplish.)
Variables- (What does this mean?)
Value - (What does this mean?)
Behavior - Represented by a set of methods and the logic they implement.
( A set of methods that is built up to tell's the how object to change it's state. )
Methods - A procedure that is executed when an object receives a message.
( A very basic comand.For example the method tells the object to move up, another method tells the method to go left. Thus making the object move up/left that combination is the behavior.)
Class - A template from which the objects are created.
( I am very confused on what classes are.)
- The definitions of the words I obtained from the "Osborne Teach Yourself Java". The () statements are how I interperate the Mechanisms (I do not know if Thats what you call them.) interact with each other. I understand my interpretation may be horribly wrong. I will incredibly appreciate all the support I may get from you.
Thank you

Object oriented programming is a replacement for the older idea of procedural programming (you can research procedural programming in google). As I understand it, in procedural programming, you have a step by step set of function calls to accomplish some task. Each function receives a data structure, manipulates it, and passes it to the next function. The problem with this is that each function preforms some action for the overall task and can't easily be reused by some other task. Its also harder to read the flow of what is happening with raw data structures flying all over the place.
In object oriented programming, an object calls a function of another object and receives back, not a data structure, but another object. Objects contain a data structure that can only be accessed by its functions. An object is not so much a sub component of a bigger task, as it is a service that any other task can use for any purpose. Also, when you pass an object to the caller, the caller can ask questions about the data structure via its functions. The developer doesnt have to know what the previous function did to the data by reading up on any documentation, or having to reverse engineer the code.
I suggest the best way of learning this is to code something like a library object.
A library object contains a collection of book objects
A book object contains a collection of chapter objects
A chapter object contains a collection of paragraph objects
A paragraph object contains a collection of sentence objects
A sentence object contains a collection of word objects.
Add functions to each object to provide a service
Example: A library object should have a:
public void addBook(Book book)
public Book getBook(String title)
public boolean isBookInLibrary(String title)
The key is to add functions to provide a service to anyone who uses your object(s)
For example, what functions (service) should a paragraph object provide?
It shouldn't provide a function that tells how many words there are in a sentence. That function belongs to a sentence object.
Lets say you want to add a new chapter to a book. The task is easy to read
if you write your objects well:
Sentence sentence1=new Sentence("It was a dark and stormy night");
Sentence sentence2=new Sentence("Suddenly, a shot ran out");
Paragraph paragraph=new Paragraph();
paragraph.addSentence(sentence1);
paragraph.addSentence(sentence2);
Paragraphs paragraphs=new Paragraphs();
paragraphs.addParagraph(paragraph);
Library library= new Library();
library.getBook("My Novel").addChapter("Chapter 1",paragraphs).
Now, lets say you want to have a word count for the entire book.
The book should ask each chapter how many words it contains.
Each chapter should ask its paragraphs, each paragraph should ask
its sentences. The total of words should ripple up and be tallied at each
stage until it reaches the book. The book can then report the total.
Only the sentence object actually counts words. The other objects just tallies the counts.
Now, where would you assign a librarian? What object(s) and functions would you provide?
If written well, the project is easily extensible.

Trying to understand a WS-I validation failure

I'm trying to understand the following WS-I validation failure message. I'm sure I'm making a basic mistake but I can't find an example of the use case where an xsd is imported. Can someone point out my error?
Thanks,
Bret
Validation failure:
Result failed:
Failure Message: A QName reference that is referring to a schema component, uses a namespace not defined in the targetNamespace attribute on the xs:schema element, or in the namespace attribute on an xs:import element within the xs:schema element.Failure Detail Message:
{http://Messages.xsd}SigReplyMessage,
{http://schemas.xmlsoap.org/wsdl/}string,
{http://Messages.xsd}SigRequestMessage
Element Location: lineNumber=8
My wsdl looks like this:
<definitions targetNamespace="urn:S3SignatureGenerator"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="urn:S3SignatureGenerator"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:messages="http://Messages.xsd">
<types>
<xsd:schema>
<xsd:import id="Messages.xsd"
schemaLocation="../../XSDDocument/Messages.xsd"
namespace="http://Messages.xsd"/>
</xsd:schema>
</types>
<message name="ReturnSignature">
<part name="SigAndExp" type="messages:SigReplyMessage"/>
</message>
<message name="RequestSignature">
<part name="Keys" type="messages:SigRequestMessage"/>
</message>
<portType name="SigGenerator">
<operation name="GetSignature">
<input message="tns:RequestSignature"/>
<output message="tns:ReturnSignature"/>
<fault name="sigFault" message="tns:SigFault"/>
</operation>
</portType>
<message name="SigFault">
<part name="faultMessage" element="string"/>
</message>
<binding name="SigGenSoapHttp" type="tns:SigGenerator">
<soap:binding style="document"
transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="GetSignature">
<soap:operation soapAction="urn:S3SignatureGenerator/GetSignature"/>
<input>
<soap:body use="literal" parts="SecretKey PublicKey"/>
</input>
<output>
<soap:body use="literal" parts="Signature"/>
</output>
<fault name="sigFault">
<soap:body use="literal" parts="SecretKey PublicKey"/>
</fault>
</operation>
</binding>
<service name="SignatureGenerationService">
<port name="SigGenSoapHttpPort" binding="tns:SigGenSoapHttp">
<soap:address location="tbd"/>
</port>
</service>
</definitions>
Messages.xsd looks like this:
<?xml version="1.0" encoding="windows-1252" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.bret.org/S3test/Messages"
targetNamespace="http://www.bret.org/S3test/Messages"
elementFormDefault="qualified">
<xsd:complexType name="sigRequestMessage">
<xsd:sequence>
<xsd:element name="publicKey" type="xsd:string"/>
<xsd:element name="privateKey" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="sigReplyMessage">
<xsd:sequence>
<xsd:element name="Signature" type="xsd:string"/>
<xsd:element name="expiration" type="xsd:dateTime"/>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>

Hi Bret,
Sorry it's taken me a bit of time to respond, but please find below a run-down of the WS-I related problems I spotted in your WSDL document. The first few are related to the import error you saw, and there's a few others that I'll also discuss. Apologies in advance if you've already spotted and corrected those.
I'll use line numbering based on the formatting of the WSDL and XSD that you supplied.
BP2417 (the one you asked about)
The line number in the error is a red herring. There are two problems here:
- WSDL document, line 29: You're using the XSD type string unqualified - it should be xsd:string.
- WSDL document, lines 8 and 13; schema, lines 3 and 4: The namespaces you're using don't match. Either change the namespaces in the schema to be http://Messages.xsd, or change the namespaces in the WSDL to http://www.bret.org/S3test/Messages.
BP2202
You should declare UTF-8 or UTF-16 encoding when creating WSDL or schema documents. The easiest way to do this is to go to Tools|Preferences, and set JDeveloper's default encoding to either UTF-8 or UTF-16.
BP2032
WSDL document, line 26 and 43: The name attribute of the fault should read SigFault, not sigFault, as WSDL is case-sensitive.
WSDL document, line 44: You should use a soap:fault element, not a soap:body element, to bind a fault, thus:
<soap:fault name="SigFault" use="literal"/>
BP2012
WSDL document, lines 17 and 20: Message parts in a document-bound service like this one should reference XSD elements and not complexTypes. What you need to do is define two elements in your messages schema whose types are SigReplyMessage and SigRequestMessage respectively, and then reference those elements from the WSDL.
WSDL document, line 38: The value of the parts attribute should be Keys to match the name of the part child of the RequestSignature.
WSDL document, line 41: The value of the parts attribute should be SigAndExp to match the name of the part child of the ReturnSignature.
WSDL document, line 44: The value of the parts attribute should be faultMessage to match the name of the part child of the SigFault.
BP2115
WSDL document, lines 17 and 20: The names of the elements should be sigReplyMessage and sigRequestMessage and not SigReplyMessage and SigRequestMessage, again because WSDL is case-sensitive.
WSDL document, line 30: The element attribute of the part references xsd:string, which is not an element but a complexType. You'll need to add an element declaration to your schema, which is of type xsd:string.
I've included corrected versions of your WSDL and schema below, I hope this helps. I also note you've posted a few other messages related to WS-I and WSDL, I hope I've managed to cover those in this message too.
Regards,
Alan.
WSDL:
<?xml version="1.0" encoding="UTF-8" ?>
<definitions targetNamespace="urn:S3SignatureGenerator"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="urn:S3SignatureGenerator"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:messages="http://Messages.xsd">
<types>
<xsd:schema>
<xsd:import id="Messages.xsd"
schemaLocation="Messages.xsd"
namespace="http://Messages.xsd"/>
</xsd:schema>
</types>
<message name="ReturnSignature">
<part name="SigAndExp" element="messages:sigReplyMessage"/>
</message>
<message name="RequestSignature">
<part name="Keys" element="messages:sigRequestMessage"/>
</message>
<message name="SigFault">
<part name="faultMessage" element="messages:faultMessage"/>
</message>
<portType name="SigGenerator">
<operation name="GetSignature">
<input message="tns:RequestSignature"/>
<output message="tns:ReturnSignature"/>
<fault name="SigFault" message="tns:SigFault"/>
</operation>
</portType>
<binding name="SigGenSoapHttp" type="tns:SigGenerator">
<soap:binding style="document"
transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="GetSignature">
<soap:operation soapAction="urn:S3SignatureGenerator/GetSignature"/>
<input>
<soap:body use="literal" parts="Keys"/>
</input>
<output>
<soap:body use="literal" parts="SigAndExp"/>
</output>
<fault name="SigFault">
<soap:fault name="SigFault" use="literal"/>
</fault>
</operation>
</binding>
<service name="SignatureGenerationService">
<port name="SigGenSoapHttpPort" binding="tns:SigGenSoapHttp">
<soap:address location="tbd"/>
</port>
</service>
</definitions>
Schema:
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://Messages.xsd"
targetNamespace="http://Messages.xsd"
elementFormDefault="qualified">
<xsd:element name="sigRequestMessage">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="publicKey" type="xsd:string"/>
<xsd:element name="privateKey" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="sigReplyMessage">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Signature" type="xsd:string"/>
<xsd:element name="expiration" type="xsd:dateTime"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="faultMessage" type="xsd:string"/>
</xsd:schema>

Trying to understand what are the parameter/output From debug SNMP timers

Hi All
I am trying to understand what are the parameter/output
From the debug SNMP timers
Output SNMP timers :
*Dec 31 11:56:27: SNMP: HC Timer 632DDE28 fired
*Dec 31 11:56:27: SNMP: HC Timer 632DDE28 rearmed, delay = 5000
*Dec 31 11:56:32: SNMP: HC Timer 632DDE28 fired
*Dec 31 11:56:32: SNMP: HC Timer 632DDE28 rearmed, delay = 5000
*Dec 31 11:56:37: SNMP: HC Timer 632DDE28 fired
*Dec 31 11:56:37: SNMP: HC Timer 632DDE28 rearmed, delay = 5000
*Dec 31 11:56:38: SNMP: HC Timer 70B54A70 fired
*Dec 31 11:56:38: SNMP: HC Timer 70B54A70 rearmed, delay = 20000
70B54A70 , 632DDE28 ² what this number means.
5000 , 20000 ² why I have different delay time ( does it means that I have delay for SNMP request )

The debug messages you are seeing are related to High-Capacity (HC) timers, which manage updates to 64-bit (HC) snmp counters as defined in RFC2233.
The "fired" and "rearmed" messages indicate when each of these timers
updates ("fired") the HC snmp counters, and when they should fire next
(the "rearmed" messages). Higher speed interfaces require updates more often than lower speed interfaces, so you see two examples of that in your debug messages - 5000 ms updates vs 20000 ms update.
The numbers that are in the messages (i.e. 632DDE28 ) are internal references to the timer that has fired.
These messages do not indicate any delay in SNMP message processing, but normal SNMP operation of HC counters.

Is there a Thunderbird manual? I'm trying to understand all the View/Threads options.

I'm learning Thunderbird, hoping to adopt it as my mail client (can't keep Eudora afloat any more). The forums are not efficient for learning it. Right now I'm trying to understand all the View/Threads options, but tomorrow it will be something else.

Thanks, those are helpful. The first one doesn't explain threads options but it led me to https://github.com/protz/GMail-Conversation-View/wiki/What-is-threading, which told me to do View > Sort by > Threaded (I had only tried View > Threads > ...). It also explains threading by message ID, whereas Eudora seems to do it only by subject line.
Neither reference explains the options under View > Threads > ... but I'll figure it out by trial & error.
The second reference led to http://www.nidelven-it.no/documentation/thunderbird/introduction-to-thunderbird, which also looks helpful.

I am trying to understand why the battery life on my recently purchased Macbook seems to be no more than 3-4 hours.

I am trying to understand why the battery life on my recently purchased Macbook pro is 3-4 hours. Does anyone have this same problem?

Call Apple Care. You have 14 days from the date of purchase to return your computer with no questions asked.
You have 90 days of free phone tech support.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

Re: Constant Message Redelivery Problem

You can get redelivery for other reasons as well. Redelivery occurs if the message is
          participating in a transaction, and the transaction fails for any reason.
          For example, if the MDB in turn calls an EJB which in
          turn calls JDBC then the tx becomes two-phase. If the JDBC call fails then the tx
          will roll back. Or if the tx times-out: the default tx timeout is 30 seconds, so if
          the MDB takes longer than 30 seconds then the tx will roll-back and message the will
          get redelivered.
          Even if the tx succeeds, in some cases you may have error states that re-enqueue the
          received message but let the transaction commit (WLI, BEA's integration product, can do
          this).
          This looks like the redelivery of a failed message, but is actually the delivery of a new
          version.
          Duplicates occur if a Queue MDB's descriptor actually points at a topic destination.
          Check for this one by comparing the JNDI name in config.xml against the
          descriptor destination type field...
          Tom
          sunshine wrote:
          > I encountered the same problem of repeat message delivery. In our situation, we are
          > using JMS JDBC Store and when the database goes down and comes back up, the MDB starts
          > processing messages but the messages keep recycling in the JMS Store.
          >
          > The MDB code tried catching all possible exceptions like RuntimeException and Exception.
          > None of these exceptions are logged. When we re-start the WL managed servers, those
          > messages in the JMS Store were flushed off.
          >
          > Any idea what caused the repeat message redelivery?? Thanks.
          >
          > Tom Barnes <[email protected]> wrote:
          > >Your MDB may be throwing a RuntimeException, which forces message
          > >redelivery. Put a try/catch/Throwable in the outermost scope of your
          > >onMessage() code to see if this is case.
          > >
          > >Note that in 6.1 and up you can configure redelivery delays, max redelivery
          > >counts and error destinations to alleviate this problem...
          > >
          > >Tom
          > >
          > >Toad wrote:
          > >
          > >> I have a message-driven bean listening on a message queue and everything
          > >> appears to work the first time the message is sent. The message is processed
          > >> and the OnMessage method returns without incident. There are no errors
          > >and
          > >> no exceptions are thrown by the JMS client or in the MDB itself. PROBLEM:
          > >> Message continually redelivered pegging the CPU at 100%. Inspection of
          > >the
          > >> JMSSTORE and JMSSTATE reveals messages still queued. Any ideas?
          > >


And make sure that your MDB is not throwing Errors or RuntimeExceptions,
          as these don't necessarily get logged, but they cause rollbacks.
          Put a "try {} catch (RuntimeException re)
          { log; throw re; } catch (Error er) { log; throw er; }"
          around all the code within the MDB's "onMessage()" callback
          to see if this is happening.
          Manikyala Peddi wrote:
          > Hi,
          >
          > I have a MDB which is calling an EJB. The redelivery override period was set at 60 sec.
          >
          > Before completing the first message the same message is redelivered.The processing time in onMessage in MDB takes more than the Redelivery Override Period. Is there a way to prevent the delivery of the duplicate message before completing the first message.Iam using Weblogic 7.1
          >
          > Thanks
          >
          > Manikyala

Message Redelivery

          Hi there,
          I would like to know how to set the JMS Message Redelivery from a server restart
          to only redeliver message after all the weblogic startup classes have completed?
          The reason for this is because the message consumer(s) depend on some configuration
          setting that are setup by the startup classes and I am getting problems during a
          server restart because the container is trying to redeliver the persisted message
          BEFORE the startup classes have completed there execution.
          Thanks!
          Vincent


Another approach would be to have your startup class spawn it's own thread
          (that contains code to deploy your MDB application) and do a JMX call to
          query if the server is up and listening (meaning that all services have been
          deployed). The JMX call could be in a loop with a sleep interval. Once the
          server is up the thread can deploy your MDBs. This way you don't have to
          worry about your MDBs consuming all available threads.
          To deploy the application using JMX, you could use code like the below. The
          following code also makes sure that the config.xml is not updated so that
          you can achieve a custom deploy every time your server is re-cycled.
          public class ApplicationDeployer implements Runnable {
          private MBeanHome home;
          private TargetMBean targetMBean;
          private ApplicationMBean appMBean;
          private WebLogicObjectName targetObj;
          .... include methods to start the thread and check if the server is up
          public void doDeploy() {
          ComponentMBean deployBean = null;
          try
          ApplicationMBean appMBean = (ApplicationMBean)
          home.findOrCreateAdminMBean(appName, "Application", domainName);
          appMBean.setPath(appPath);
          if (deployFileName.indexOf(".jar")>0){
          deployBean = (EJBComponentMBean)
          home.createAdminMBean( deployAppName ,
          "EJBComponent", domainName, appMBean);
          } else if (deployFileName.indexOf(".war")>0){
          deployBean = (WebAppComponentMBean)
          home.createAdminMBean( deployAppName ,
          "WebAppComponent", domainName, appMBean);
          if ( Double.valueOf(getVersion()).doubleValue() > 6.0 )
          deployBean.setPersistenceEnabled( false );
          deployBean.setURI(deployFileName);
          deployBean.addTarget(targetMBean);
          appMBean.addComponent(deployBean);
          appMBean.deploy();
          appMBean.load();
          catch (Exception e){
          System.err.println("Exception at AppDeployer.doDeploy " , e);
          Thanks,
          Adarsh
          "Tom Barnes" <[email protected]> wrote in message
          news:[email protected]...
          > The messages on boot are not "redelivered" messages (there is no matching
          > recover/rollback in the current server's context), so a delay has no
          effect.
          > I'm sorry if I gave the impression that a redelivery delay has an effect
          at boot time...
          > Specifically, redelivery delay configures the amount of time a message
          should remain
          > in limbo before it is made visible again after an application calls
          recover or rollback.
          >
          > You really should post to the ejb newsgroup. I think there may be some
          control
          > over startup ordering (MDB after startup classes).
          >
          > Worse comes to worse, your MDB
          > can block (wait()) until the startup class calls notify() - Just make sure
          the MDBs max
          > pool size is less than the default-thread-pool-size, or make sure to
          give the MDBs
          > their own thread pool, to prevent them from consuming all available
          threads.
          >
          > Tom
          > Vincent wrote:
          >
          > > Hi Tom,
          > >
          > > I am using WLS6.1 sp2 running on solaris. The problem I am having is
          that messages
          > > are getting reloaded and sent at the next server restart before my
          weblogic startup
          > > class has completed its execution. My onMessage() method in my
          MDB(shouldn't matter
          > > if it's a MDB or a PTP JMS consumer..?) depends on some objects that are
          initialized
          > > by the startup class. I tried setting DefaultRedeliveryDelay in the
          JMSConnectionFactory
          > > to a very long delay but that does not help.
          > >
          > > Tom Barnes <[email protected]> wrote:
          > > >By "containers" I assume you mean MDBs???? Please post your question
          to
          > > >the ejb newsgroup, along with your version and SP level.
          > > >
          > > >Tom
          > > >
          >

I am trying to understand my Console System Log Queries, but not having much luck!!

I am trying to understand my MB late 2011, much better than I do, whilst looking through my console messages, I realised I don't have a clue as too whats what, I seem to be getting a lot of system errors - Is this normal?
Why are Mac Books soooo complicated - !
I would copy and paste my system messages - but once again I am 2 thick - don't know which bits - if any would need editing!
Any advise would be a great help.
Thankyou in advance.
la9

You would use the Input button on your remote to set the Input to RGB PC and you'll also need audio cables to the TV because the Mini-DVI does not carry audio using a 3.5mm stereo headphone jack to RCA sound plug. You attach it from the headphone jack of your MacBook to the appropriate input plug on your TV.
When you first hook it up it will probably have the display set in Extended Desktop mode. The Menu Bar and Dock will be on the MacBook display and your background screen on the TV but you can move the cursor onto the TV screen.
In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box.

Hello, World - trying to understand the steps

Hello, Experts!
I am pretty new to Flash Development, so I am trying to understand how to implement the following steps using Flash environment
http://pdfdevjunkie.host.adobe.com/00_helloWorld.shtml
Step 1: Create the top level object. Use a "Module" rather than an "Application" and implement the "acrobat.collection.INavigator" interface. The INavigator interface enables the initial hand shake with the Acrobat ActionScript API. Its only member is the set host function, which your application implements. During the initialize cycle, the Acrobat ActionScript API invokes your set host function. Your set host function then initializes itself, can add event listeners, and performs other setup tasks.Your code might look something like this.
<mx:Module xmlns:mx="http://www.adobe.com/2006/mxml" implements="acrobat.collection.INavigator" height="100%" width="100%" horizontalScrollPolicy="off" verticalScrollPolicy="off" >
Step 2: Create your user interface elements. In this example, I'm using a "DataGrid" which is overkill for a simple list but I'm going to expand on this example in the future. Also notice that I'm using "fileName" in the dataField. The "fileName" is a property of an item in the PDF Portfolio "items" collection. Later when we set the dataProvider of the DataGrid, the grid will fill with the fileNames of the files in the Portfolio.
<mx:DataGrid id="itemList" initialize="onInitialize()" width="350" rowCount="12"> <mx:columns> <mx:DataGridColumn dataField="fileName" headerText="Name"/> </mx:columns> </mx:DataGrid>
Step 3: Respond to the "initialize" event during the creation of your interface components. This is important because there is no coordination of the Flash Player's initialization of your UI components and the set host(), so these two important milestone events in your Navigator's startup phase could occur in either order. The gist of a good way to handler this race condition is to have both your INavigator.set host() implementation and your initialize() or creationComplete() handler both funnel into a common function that starts interacting with the collection only after you have a non-null host and an initialized UI. You'll see in the code samples below and in step 4, both events funnel into the "startEverything()" function. I'll duscuss that function in the 5th step.
               private function onInitialize():void { _listInitialized = true; startEverything(); }

Hello, Experts!
I am pretty new to Flash Development, so I am trying to understand how to implement the following steps using Flash environment
http://pdfdevjunkie.host.adobe.com/00_helloWorld.shtml
Step 1: Create the top level object. Use a "Module" rather than an "Application" and implement the "acrobat.collection.INavigator" interface. The INavigator interface enables the initial hand shake with the Acrobat ActionScript API. Its only member is the set host function, which your application implements. During the initialize cycle, the Acrobat ActionScript API invokes your set host function. Your set host function then initializes itself, can add event listeners, and performs other setup tasks.Your code might look something like this.
<mx:Module xmlns:mx="http://www.adobe.com/2006/mxml" implements="acrobat.collection.INavigator" height="100%" width="100%" horizontalScrollPolicy="off" verticalScrollPolicy="off" >
Step 2: Create your user interface elements. In this example, I'm using a "DataGrid" which is overkill for a simple list but I'm going to expand on this example in the future. Also notice that I'm using "fileName" in the dataField. The "fileName" is a property of an item in the PDF Portfolio "items" collection. Later when we set the dataProvider of the DataGrid, the grid will fill with the fileNames of the files in the Portfolio.
<mx:DataGrid id="itemList" initialize="onInitialize()" width="350" rowCount="12"> <mx:columns> <mx:DataGridColumn dataField="fileName" headerText="Name"/> </mx:columns> </mx:DataGrid>
Step 3: Respond to the "initialize" event during the creation of your interface components. This is important because there is no coordination of the Flash Player's initialization of your UI components and the set host(), so these two important milestone events in your Navigator's startup phase could occur in either order. The gist of a good way to handler this race condition is to have both your INavigator.set host() implementation and your initialize() or creationComplete() handler both funnel into a common function that starts interacting with the collection only after you have a non-null host and an initialized UI. You'll see in the code samples below and in step 4, both events funnel into the "startEverything()" function. I'll duscuss that function in the 5th step.
               private function onInitialize():void { _listInitialized = true; startEverything(); }

Iphone 5 - I am trying to delete message threads and once I do, I go to text someone else and it won't send. HELP? I just don't want those messages on my phone anymore.

Iphone 5 - I am trying to delete message threads and once I do, I go to text someone else and it won't send. HELP? I just don't want those messages on my phone anymore. I have tried to restart my phone but when I do, the "deleted" threads show back up on my phone. I use iOS 7.1.

Hello Makayla,
It sounds like you're deleted message threads keep coming back after you restart the devie. I recommend starting by quitting all the running apps on your phone:
iOS: Force an app to close
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the device and test the issue again:
iOS: Turning off and on (restarting) and resetting
If the issue persists, backup your device to iTunes and then restore it as a new device and verify that it works.
How to erase your iOS device and then set it up as a new device or restore it from backups
If it does, then restore your backup to either verify it still works and the software just needed reinstalled, or isolate the issue to the backup file itself.
Thank you for using Apple Support Communities.
Regards,
Sterling

Trying to understand OIM - Please help

Hello All,
I am pretty new to OIM, just trying to understand how OIM works. For the past 4 years I was in Sun IdM and planning to switch over to OIM.
I read some documentation, I think OIM will perform basic provisioning and it contains out of box connectors to do basic provisoning. I have some questions can anybody please help
- Sun IdM uses Express language to develop custom workflows or forms, in OIM to develop workflows which language did you use, is it Java or any other language?
- If I want to provision users on AS/400, HP Open VMS or AIX systems, how can I do that I don't see any out of box connectors for these resources, so in order to integrate these resources do we need to write our own custom connectors?
- If the out of box connector does not support a specific function on a resource what are the options do we have? for example if the AD connector does not support to delete the exchange mailbox, how your going to perform this in OIM? Do we need to write a Java code for this?
- How much Java coding is necessary in OIM?
- Is OIM supports role based provisioning?
Please share any information.
Thanks in advance.

Sun IdM uses Express language to develop custom workflows or forms, in OIM to develop workflows which language did you use, is it Java or any other language?
- JAVA
If I want to provision users on AS/400, HP Open VMS or AIX systems, how can I do that I don't see any out of box connectors for these resources, so in order to integrate these resources do we need to write our own custom connectors?
- If OOTB connectors are not available then you'll have build you own connector as per Target Resource.
If the out of box connector does not support a specific function on a resource what are the options do we have?
- You'll have customize their connector as per your requirements or write your own
How much Java coding is necessary in OIM?
- We can't calculate how much java. It's totally depends on requirements how much code you'll ahve to write. But everything will be done using Java only.
- Is OIM supports role based provisioning?
Here Group represent Role. At a small scale it supports. But for large scale you'll have to use Oracle Role Manager as you do in Sun Role Manager.

Trying to understand message redelivery

Similar Messages

Maybe you are looking for