TS1367 I am getting a white apple screen with spinning clock like logo-I can't do anything it is frozen and continuously spinning

I am getting a white apple screen with a spinning clock like logo-I can't do anything it just keeps spinning

Other troubleshooting information.
Startup Issues - Resolve
Startup Issues - Resolve (2)

Similar Messages

On doing a full Restore on my iMac from A time capsule, I am getting a permanent white apple screen with permanent loading wheel. This is my second attempt to restore with the same outcome. Seems like the last stage of the restore is getting stuck. Any ti

On doing a full Restore on my iMac from A time capsule, I am getting a permanent white apple screen with permanent loading wheel. This is my second attempt to restore with the same outcome. Seems like the last stage of the restore is getting stuck. Any tips on how to sort this out please.
iMac, Mac OS X (10.7.3)

It just means some spammer is using your email address as the sender address for their spam. This is very easy to do - anyone can do it simply by changing the From email address in their email program. It does not mean your account was hacked or you have a virus (there are no current Mac viruses on the loose anyway, nor has there been for years).
There's nothing you can do about it. It can happen to anyone and the spammers will move on to using someone else's email address before long.

Upgraded my 4s to 7.1.2 iOS and when I turn on I get the white apple screen and then it changes to a 30 pin connected with an arrow pointing to an iTunes logo, before shutting down.

what procedures do I need to follow to get my phone up and running? I had a similar experience last year with my iPad 2 and had to reload everything, except I wasn't doing an upgrade at the time. When I plug my 4s into my charger the screen shows the connector and iTunes logo. I have tried to reboot several times without success.

Correct. Everything is already lost if it's in recovery mode. You can restore a backup after restoring the phone.

Macbook pro won't boot, stuck on white apple screen

Noticed today, that my macbook pro won't boot . It gets to the white apple screen with the spinner under the apple logo. It stays like this for a long time without doing anything except spinning.
I've powered down and tried to boot up several times.
I have boot camp and windows on my mac and when the white screen appears, I can press Option to bring up which hard drive and the Windows partition will load without any problems.

Exacty what happens when you try to boot up from the disc that came with your computer? Are you holding down the c key? Have you tried holding down the "option key?" Are you able to run the Hardware Test - Intel-based Macs: Using Apple Hardware Test
Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer. Now reboot.
If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again. If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up. At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver.
If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode.
If the Mac starts up correctly, restart without pressing the "shift" key.
If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
(If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
Remove any 3rd party ram.
Reinstall Lion - This will install a "fresh" copy of Lion without archiving old system files but leaves the rest of your files in place.
If your computer is still under warranty or you have Apple Care, take full advantage of it by letting tech support deal with your problems. It's what you're paying them for.
Out of warranty - take the computer to an Apple store or an AASP. Whichever is more convenient for you.

MacBook Pro (late 2011) stuck at white Apple screen.

Hi all. My MacBook Pro 13 inch (late 2011) is giving me the same problem over and over again.
Few months ago, I had sent it to Apple for repair due to faulty HDD. Now the same problem happened again. The MacBook will stuck at the white Apple screen with the circle turning when attempting to switch on.
However, Apple had just replace a new HDD and why it's still happening again?
Can anybody here please assist to advice me what is making my Mac unable to start up, stuck at the white Apple screen, even after replacing a new HDD?
Thank you!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

White apple screen

I have a white apple screen with the loading wheel and nothing else happens.
Any ideas of what it could be or how to fix this.?

My question to you - did you auto move your files from an old comptuer to the new one?
I had the white screen, and could only boot on safe mode to log in. (hold SHIFT after the chime, release it when you see a progress bar).
My issue - some very old items in the startup items folder; which apparently weren't compatible with SL. (through checking I also removed corrupt fonts, and old System Preference items)
I would boot up safe (or with CD), then check out <hard drive>/Library/Startup Items and see if there are old items in there. Either remove them (and store in a folder just in case), or update the software. mac boots fine now.

Pavilion p6-2117 won't get past the splash screen with a parallel card installed.

Pavilion p6-2117c won't get past the splash screen with a pci express parallel card installed. I take the card out and the machine works just fine. The screen says press "esc" for startup menu but nothing happens.
This question was solved.
View Solution.

Take a careful look at the slot and see if any of the pins are broken or smashed to the bottom of the slot. Do you have another pci slot to try or just the one?
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

MacBook Pro 2011- Allowed updates to install for iTunes software and Microsoft office (I think). After rebooting, computer wouldn't progress past grey apple screen with loading circle.

I have a MacBook Pro 2011. I allowed updates to install for iTunes software and Microsoft office (I think). After rebooting, computer wouldn't progress past grey apple screen with loading circle. No progression bar ever appeared. It just sits and spins. I tried rebooting with Command + Option + R + P and hearing the chime twice....this did not work.
I also tried Command +Option+R which took me to internet recovery. From there, I chose reinstall Mac OS X Lion 10.7 but it says my hard drive is locked so I wasnt able to select it. What do I do???? Help! I don't want to lose my files and it doesnt appear that I've used Time Machine Back Up.

macbookpro2011ISU wrote:
I also tried Command +Option+R which took me to internet recovery. From there, I chose reinstall Mac OS X Lion 10.7 but it says my hard drive is locked so I wasnt able to select it.
I you upgraded to OS X 10.8, then use RecoveryHD by holding Command R at boot time (no option) and reinstall OS X over itself that way so your installing Mountain Lion.
Also Disk Uility can be used to Repair the Macintosh HD parttion.
Also you can use that RecoveryHD to format and install OS X onto a external drive, then option/alt key boot from it and access your files on the non-booting internal drive before erasing, reformatting and reinstalling OS X fresh.
Create a data recovery/undelete external boot drive
Most commonly used backup methods
..Step by Step to fix your Mac

HT4061 I have an iphone 3gs - the new ios 6.1 (?) upgrade has inabled my phone. I get a white apple on the screen. can't reset phone - doesn't work. what can I do besides take phone into Apple?

I have an iphone 3gs - yes, an older iphone.
This morning apple had a msg that asked if I wanted to upgrade to the new ios 6.1 (?). I said yes. Now I can't use my phone. I've tried hitting the power and other buttons. I get a white apple on the screen. can't reset phone - doesn't work. what can I do besides take phone into Apple? This *****! I realize (now from reading internet) that my phone/system may be uncompatible. Help!

I have a 3GS (a true classic design!) and have upgraded it to 6.1 today. The process did not go without a glitch - it took a few attempts to get the app's to sync but after detecting the ones causing an issue and deleting them it works - so far! I have had issues about 50% of the numerous times a new OS is uploaded to this phone and always take the new OS with trepidation. But at least you know there is a 3GS with 6.1 working OK.
I suggest you do a fresh restart to the phone several times - without it being connected to the computer - to see if it gets its act together and starts. I think it will. Hold down the top 'power' button and front round control button until it shuts down - goes blank and dead. Then press the top power button to re-activate - reboot - it.
If that does not work then plug into your itunes computer, navigate in iTunes to see your iPhone and hopefully you will be able to sync it or at least 'restore iPhone' from the 'summary' tab.
If you can not get onto the iphone perhaps you will still be able to sync if in iTunes by going - 'file' - 'devices' - 'sync iphone' or failing that try transfer purchases' and ultimately 'restore from back-up'.
I had technical problems with my old 3GS (suffered a failed wireless antenna) so I took it to an Apple Store and they issued me with a service-replacement/reconditioned phone for a very modest charge. So if worst come to the worst get a new phone that way!

My Ipad won't boot up I am just getting a white apple in the center of the screen?

My Ipad won't boot up I am just getting a white apple in the center of the screen?

Try to reset the device:
Device Reset (won't affect settings/data/music/apps/etc)
Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

My iphone got wet and after letting it dry all i get is the black screen with the grey apple and a bunch of white writting, what do I do to fix it?

my iphone got wet and after letting it dry all i get is the black screen with the grey apple and a bunch of white writting, what do I do to fix it?

You can try and put it in a bag of uncooked rice for 5 days or so, but don't get your hopes up. If that doesn't work, you get an out of warranty replacement or buy a new phone.

My macbook air won't get past the white apple screen. I've tried power cycling the batter but won't help

my macbook air won't get past the white apple screen. I've tried power cycling the batter but won't help

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something"sign... it just doesn't start the system....

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
Please help
Marcelo

If there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
Gray, Blue or White screen at boot, w/spinner/progress bar
Also take this time to backup your users files off the machine if possible.
Most commonly used backup methods
Sometime that won't work and you need to do more
..Step by Step to fix your Mac

I can't log in to my computer- when it turns on it has a white/gray screen with a flashing folder with a question mark in it. What does this mean and how can I get it to stop to log in?

Hi
I dropped my macbook yesterday and it turned itself off. When I tried to turn it back on all I got was a white/gray screen with a flash folder with a ? in the middle of it? What does this mean and how do I get it to stop so I can log onto my laptop?

Deev
Normally the question mark on the gray screen means it can't find the operating system. Have you tried booting up from the installation DVD? Do that, and when you come to the screen where it wants to begin a system installation you'll notice in the menubar where it say's utilites. Click on that and choose disk utility. from there choose your disk and try to verify and repair the disk. If you can you may want to also try and new install of the system. I don't know how much critical data you have, but reinstalling is an option. did you purcahse you from an Apple store? If you did you may want them to look at it. Hope this helps.
Regards,
Joseph

G5 mac wont boot up past white apple screen

My kids mac wont boot up past the white apple screen. I can here everything running but the monitor starts to get all static and scan lines with a reddish tint to it. I tried the commandoption+pr but it still wouldn't boot-up past the white apple screen. Not sure what else to do. Any help would be greatly appreciated. Thanks in advance

Hi there Peter,
Not cheap anyway you look at it sorry, professional Data Recovery being the most expensive.
Unfortunately, Disk Utility can't fix all that much, and the only other Apple Options are erasing the HD, or installing OSX to a second drive, then using Migration Assistant to move stuff over to the new HD.
If Disk Utility or fsck should fail to repair it, your best bet is DiskWarrior from Alsoft, you'll need the CD to boot from if you don't have another boot drive...
http://www.alsoft.com/DiskWarrior/
Your best bet is DiskWarrior, you need the CD/DVD though.
http://www.alsoft.com/DiskWarrior/
But others that may work…
Drive Genius 2…
http://www.prosofteng.com/products/drive_genius.php
TechTool Pro 4…
http://www.micromat.com/index.php?option=com_content&task=view&id=31&Itemid=83
Data Rescue II...
http://www.prosofteng.com/products/data_rescue.php
This one would require another HD with plenty of space to recover to.
You should use another Boot Disk or other Mac with this one in Target mode to do the recovery.
They have a free demo to see what it could recover.

TS1367 I am getting a white apple screen with spinning clock like logo-I can't do anything it is frozen and continuously spinning

Similar Messages

Maybe you are looking for