TS1367 my laptop will not boot up from the storage hard drive but if i remove it from the laptop and connect it as portable hard drive my laptop boot up normal?

my laptop will not boot up from the storage hard drive but if i remove it from the laptop and connect it as portable hard drive my laptop boot up normal?

Do you have a compatible OSX installed on this 'storage' HDD?  If not, it will not boot your MBP.
Ciao.

Similar Messages

  • I am making my first keynote presentation.  I transferred the slides from a power point.  I did not use a 'theme' from keynote.  Keynote will not let me 'name' the presentation and the 'save as' option will not come up in the menu.  What have I done wrong

    I am making my first keynote presentation.  I transferred the slides from a power point.  I did not use a 'theme' from keynote.  Keynote will not let me 'name' the presentation and the 'save as' option will not come up in the menu.  What have I done wrong

    When it comes to Keynote, I try and start with a presentation that's 1680 x 1050 preset or something in that range.  Most projectors that you'll get at a conference won't project much higher than that and if they run at a lower resolution, it's better to have the device downsize your Keynote.  Anything is better than having the projector try and upsize your presentation... you work hard to make it look good, and it's mangled by some tired Epson projector.
    As far as slides go, scan them in at 150 dpi or better, and make them at least the dimensions of your presentation.  Keynote is really only wanting 72dpi, but I do them at 150, just in case I need to print out the presentation as a handout later, and having the pix at 150 dpi gives me a little help with their quality on a printer.
    You'd probably have to drop in the 150 versions again if you output the Keynote to .pdf or Word or something, but at least you have the option.
    And Gary's right (above) go ahead and scan them as TIFFs.  Sooner or later you'll want to do something else with these slides (like make something for an iPad or the like) and having them as TIFFs keeps your presentation looking good.
    Finally, and this is a big one, get to the location for your presentation ahead of time if you can, and plug the laptop in and see what you get.  There's always connection problems. Don't let the AV bonehead tell you everything will work just fine ('... I don't have any adapters for a Mac...') .  See it for yourself... you're the one that's standing up there.  Unless it's your boss, then you better be really sure it works.

  • HT201272 I have a purchased app that will not show up in the cloud and is no longer in the app store. Is there a way to get it from my iPhone to my iPad?

    I have a purchased app that will not show up in the cloud and is no longer in the app store. Is there a way to get it from my iPhone to my iPad?

    You should be able to copy it from your iPhone to your computer's iTunes via File > Devices > Transfer Purchases, and if it's compatible with your iPad you can then sync it to it

  • My Macbook Pro keyboard AND USB keyboard will not work.  However, the trackpad and USB mouse will work.  Any help?

    My Macbook Pro keyboard and USB keyboard will not work.  However, the trackpad and USB mouse will work.  Any help?
    This is quite frustrating, since it randomly occured as I was browsing the web.  It seemed to happen out of nowhere.  I cannot login to my user account because I cannot type my password. 
    Any help will be appreciated.
    -Matt

    If you have another Mac, boot the non-working one into Target Disk Mode (holding down "T" at startup). Hook up the two Macs via a Firewire cable. The non-working one will mount on the other Mac as an external Firewire HD.
    Next, download the 10.5.6 Combo update from here:
    http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1056comboupdate .html
    Run it. When it asks you for a destination, choose the other Mac that was mounted via Firewire. When it's done, unmount the computer and restart it. The keyboard and mouse should work now.

  • Macbook Pro will not boot up normally ***Not Normal Problems***

    Ok. I have an older 17" Macbook pro 2.33 (10.6 fully updated) that will not boot up in normal mode. When I boot it shows "blocks" of different colors and will not get past the blue screen sometimes. When it does get passed the the blue or grey screen it is a split screen of white back ground with large black blocks seperating the sides. I have tried swapping out harddrives with a known working one with an OSX image on it-no good. I have tried  swapping out ram-same thing. I reset the SMC and PRAM-only colors changed in the blocks. I have ran disk utilites disk and permisions with no problems. I can't boot into a restore disk using the c key during boot, It locks up at the same screen. Nothing works except safe mode. I can boot into safe mode and everything works just fine with normal screen and all. Now I tried runing the Lion installer thinking it is and driver issue but I can't get Lion to boot to the hard drive and Snow leopard just reboots back to the same screen. So how can I get Lion to install or Snow Leopard?
    What can I do? I noticed this last weekend when I tried to reboot my MB Pro and it started this. Well Apple pushed and update last friday - I needed to restart it again and this happends. I thought it was a logic board at fist until it booted fine in safe mode.

    Sorry. What I mean is I selected the SL boot up in the start up panel and it would not boot into the cd. The CD rom sounds like it just keeps reading with it slowly loading from grey screen to blue screen to the Block screen. Almost like it is booting into normal mode from the hard drive.
    What I can't understand is why it runs fine is Safe mode?
    Also why do I get a " this disk cannot be used to start up your computer" message on my hard drive when trying to install Lion in safe mode? Well why not it's the only hard drive in the computer?
    The first screen shot is the Tech tool showing everything passed the hardware test is safe mode.

  • Installed Maverick, now Macbook Pro will not boot in normal or safe mode. UPSET!

    Hello to anyone who can be of help to me. I have been without my 2008 Macbook Pro for months due to installing Maverick. After installing it, within a day or two, it crashed and now will not reboot in normal mode or sade mode. I've never had any problems from this computer until now.
    I don't know much about Macs and I can't fix this. I also live over an hour away from any Apple store. I feel this is Apple's fault and I am pretty upset that this has happened to my laptop.
    I understand this to be a Kernal Panic or something like that, which happens after installing a program, like Maverick. I have tried erasing the PRAM and still won't reboot in either mode. I would greatly appreciate any help I can get! Thanks! I love Apple. I am not bashing them, I just don't appreciate their software messing up my lappy.

    Have you tired a SMC reset?
    support.apple.com/kb/ht3964http://
    Also examine this article for possible remedies:
    https://discussions.apple.com/docs/DOC-3353
    Consider reinstalling the original OSX.
    You may eventually 'bite the bullet' and make an appointment at an Apple store genius bar.
    Ciao.

  • I purchased an email itunes gift card. Itunes will not let me resend the email ( and error msg appears). How can I resend this email?

    I sent my sister an egift card. SHe did not recive it due to her settings. I have tried to resend it for several weeks, but ontinue to get a message stating that this function is unavailable that this time and to try again later. Is there anything I can do to resend this message??

    You can manually copy and paste the code and email it to your sister that way.

  • When I key on a website it will not come up all the sudden and the search times out. It is usually a click on attachment and Firefox has gotten very slow.

    For example, I opened my Citibank file and tried to open my Visa account and it would not open and then timed out. I tried to open from my email my college board account and it only timed out. I went to Internet Explorer and they opened. Is there a problem at Firefox?

    @Steve_Clairman, if you are looking for the orange Firefox button (abbreviated menus), it will appear if you turn off the classic menu bar:
    View menu > Toolbars > ''uncheck'' Menu Bar

  • How do I clear the "Well this is embarising" screen? It will not let me run the program and I have deleated the program just to reload it and get same screen!

    The screen that says, "Well this is embarrassing" and asks to either remove a tab or start a new session, which I cannot do neither. I have deleted the program several times and when I reload it the same screen comes up and the program freezes. Task manager is the only way to remove it from my screen. I need to find the location of that screen and delete it.

    It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
    *Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
    *http://kb.mozillazine.org/Multiple_profile_files_created

  • The ITunes is stuck at the terms and conditions.  It will not let me send the emaul to accept the terms of the priviacy policy.

    The itunes store will not let me accept the terms and condition policy by email.  I am stuck and not some of the application are not usable.  Thanks.

    Hi there manayu,
    You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    -Griff W.

  • HT201412 My ipad mini will not power off. The ICloud Backup  reminder is stuck on the screen and will not clear off.

    My ipad mini will not power off, nor will it respond to any commands.  The ICloud Backup reminder (which I do not use and have not activated)is stuck on the screen and will not clear.

    Hold down the sleep and home keys for about 20 seconds and see if you can get it to reboot.

  • BIOS update, then will not boot from any drive

    This old laptop, 3000 C200 8922 was acting very clunky when on wireless.
    Downloaded Bios Version 63ET62WW and flashed it into the bios.
    Now, even though I can get to the bios screen, and it shows the hard drive, DVD/CD drive, it will NOT boot from either.
    It will also "see" a usb installed, but will not boot from it.
    I have removed all power and cleared the CMOS several times and I still have nothing. Tried two different hdd's which have been in the machine and same results. 
    HELP!! I should have never messed with it......

    hi k4pew,
    One rule after a BIOS update is to Load optimize deafults after updating.
       Try that go inside BIOS Hit F9 to load defaults then F10 to Save and Exit.
    If not
    Try turning on the computer and start hitting F1 to load the Recovery Menu and see if that will push then Try Reseting the PC.
    If still the same Im afraid that the BIOS needs to be reflashed.
    Im not aware of any flash tool or a your Previous BIOS Version Firmware available for download.
    You can try calling Lenovo Technical Support for any options available for repair.
    Im sorry to hear what happened
    Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Laptop will not boot, no display and flashing caps key

    Hi,
    I am attemping to repair a laptop for a family member, their baby threw up on the keyboard, although after they cleared it up they said it was still working (booting into windows, mouse working etc). They took the old keyboard out themselves but it looks like they were a bit heavy handed with it; there are quite a few scratches on the metal plate underneath the keyboard and the plastic surround. I have not yet been able to confirm if the laptop was still booting after the keboard was removed.
    Anyway - I went to their house to do what I thought was going to be a relatively easy job, simply connecting the new keyboard. Now the laptop will not boot, there is no display on the screen and we get a flashing CAPS/F12 key. I have looked at the table for LED codes, but I am not sure if it is one flash lots of times, or six flashes. The warranty has also run out so sending to HP not really an option.
    There are six short flashes, with quite a long pause between each one. After this the laptop powers off and after another pause turns itself back on and starts over. If it is one flash (CPU) then I guess they must have shafted something on the board by shoving the screwdriver in underneath the keyboard to prise it away from the laptop. There is however not an awful lot of stuff exposed - there is a fairly substancial metal plate under where the keyboard would sit to protect the laptop.
    I am hoping at the moment that it is showing six flashes - which is BIOS authentication error. I am not that familiar with HP products, but could this be caused by installing a non-genuine keyboard? The keyboard looks the same from the top, but was bought for less than a tenner on ebay.
    If anybody has any ideas that would be great.
    Aaron

    Hi there,
    I have a link of HP support that you may have a look and try to find out what exact the problem of you PC, good luck.
     And let me know what have you find out.
    It is:
      http://h10025.www1.hp.com/ewfrf/wc/document?cc=au&dlc=en&docname=c01443371&lc=en&product=4115148&  tmp_track_link=ot_search
    Tomme

  • Apple Macbook 13.3" Laptop-Black 2008 2.4GHz Intel Core 2 Duo will not boot up and instead I get a grey screen with a folder and a question mark over it.

    My Apple Macbook 13.3" Laptop-Black 2008 2.4GHz Intel Core 2 Duo will not boot up and instead I get a grey screen with a folder and a question mark over it.  I've tried Option key, and Control S keys and it still will not boop up.  Can anyone help?

    If you are running Snow Leopard:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    If you are running Lion or later:
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it isthree times faster than wireless.

  • Toshiba Satellite Laptop - Will Not Boot, Safe Mode Not Accessible

    Hi everyone, thanks in advance for your help.
    I am trying to help my mother-in-law (I know, who does that!?) with her laptop. Because of the boot problems, I can only offer you limited info on the specs, but here is what I do know.
    Toshiba Satellite
    Model Number PSAE6C-TJ908C
    2 Gig RAM (assuming DDR2)
    HDD is a Toshiba MK2035GSS 200Gig
    OS Windows Vista
    Bios Version 2.60
    Problem:
    First it would boot ok in one user account, but when booted in secondary account it would act odd, ie caps lock stayed on when not pressed, etc. Deleted secondary account, ran Windows repair function, now I cannot access the primary account, will not boot in safe mode, can not change boot sequence in setup to boot from cd or run restore disc. I have to use an external keyboard as the laptop keyboards enter key and "a" keys do not work. (New keyboard which was replaced in December, warranty has since run out, thank you Staples.)
    Any and all help greatly appreciated. I'll answer any other questions you have as they come up, I realize I may have left out some key details.
    I forgot to add a couple of details. When booting, it hangs at the Toshiba screen prompting for either F2 for setup or F12 for boot device selection, when you reach the log in screen it gives a number of odd sounding beeps (3 I believe), the Filter Keys box comes up, and when you try to enter the login password it will not recognize it.

    Satellite A200-TJ (9PSAE6C-TJ908C)
    will not boot in safe mode, can not change boot sequence in setup to boot from cd or run restore disc.
    I have to use an external keyboard as the laptop keyboards enter key and "a" keys do not work.
     it hangs at the Toshiba screen prompting for either F2 for setup or F12 for boot device selection, when you reach the log in screen it gives a number of odd sounding beeps
    That's one sick laptop. If the thing beeps on startup and even the keyboard doesn't work, I'd figure on replacing it.
    Are there important files you need to rescue?
    -Jerry

Maybe you are looking for