TS1369 I have Windows 8, and my ipod doesn't do anything when plugged in. It doesn't even show it's charging. What can I do?
I installed iTunes, installed the drivers for the shuffle, and synced once. Now, It doesn't charge. It doesn't make any noise when I plug the ipod into the usb and doesn't show anything in iTunes.
Here:
iOS: Device not recognized in iTunes for Mac OS X
or
iOS: Device not recognized in iTunes for Windows
Similar Messages
-
my ipad air is not turning on, when I plug it in it doesn't even show that is charging and I tried several chargers they all work fine, its just when off and pitch black help!!!
If the battery is very low, it can take 15 minutes or maybe even longer befor you will see any response at all on the screen. If you have let the iPad charge for what you think is a sufficient length of time and it still hasn't shown any signs of life, try a reset and see if that will force it to start up.
Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo apperas on the screen and then let go of the buttons. If that still doesn't work, try charging the device again overnight. If it's still dean in the morning, try restoring the device with iTunes.
Use iTunes to restore your iOS device to factory settings - Apple Support
If that doesn't work, make an appointment at an Apple Store and seek their guidance. -
i've a iMac 27', summer of 2012, and my garageband doesn't record by the internal microphone, what can I do, to resolve this problem?
only for contextualize, in other softwares the microphone record correctly like quicktime, or in facetime, even photobooth. but in garage band not.
i dont know if its a problem of the software, an error of actualization, or a bad configuration. please give me a hand.
cheers.Did you choose the mic as the input device in Garageband Preferences?
-
TS1369 I have windows 8 and itunes is not recognising my ipod can anyone assist?
I have windows 8 and itunes is not recognising my ipod - anyone assist?
Hi Moclam12,
Thanks for visiting Apple Support Communities.
If your iPod classic is formatted for Windows, and you want to sync it with your Mac, try to force the iPod into Disk Mode and then restore it using your Mac.
Putting iPod into Disk Mode
http://support.apple.com/kb/HT1363
Restoring iPod to factory settings
http://support.apple.com/kb/HT1339
If the iPod is not recognized by your Mac when it is in disk mode, the troubleshooting advice in this article may help:
iPod not recognized in iTunes and Mac desktop
http://support.apple.com/kb/ts1410
Best Regards,
Jeremy -
I have an iphone 5. I have allready installed ios 7 and updated to ios 7.02. When i try to use airdrop even if i activate it my phone cannot find any device also other iphones and ipads using ios 7 cannot see my iphone. İ could not find a solution for this problem.
Hi there Akinci,
You may find the troubleshooting steps toward the bottom of the article below helpful.
iOS: Using AirDrop
http://support.apple.com/kb/HT5887
-Griff W. -
My ipod nano 4th generation was set up/registered using my mac computer. Unfortunately it was plugged into a pc and all my files, (song, pics, etc) were erased. When I plugged my ipod into my mac to sync it again, it wouldn't even appear in the source list. I can't even click on it to restore it. It's simply not there. Any ideas on how I can get it to appear in my source list and sync it again using my mac? Suggestions would be greatly appreciated! Thank you!
SteveWhich OS & iTunes versions do you have?
-
Since updating to the 7.0.3 my screen won't rotate to play games and it takes seconds for my words to show up after typing them. Also facebook lags really bad. What can I do to fix this?
That would depend if you have the potrait orientation lock - on.
If you see a lock icon with an arrow around it on top of the home screen next to your battery then that means you have it enabled.
to disable swipe up from the bottom of the phone (near home button) to access the control center, hit that icon. -
Okay so I was trying to re-download and app called, "Infinite Flight" as I came across a sign that said I had to re-pay. I had already purchased the app, this app didn't even show on the past purchases tab. But i had downloaded it before, this is not funny and should be fiixed immediately. Please answer, and thank you so much if you can tell me why. Thanks!
Most of the people on these forums are fellow users, not iTunes Support, nobody on here can fix anything for you.
You haven't changed country or are now using a different account since buying it, it's exactly the same app, and it's not hidden from your purchased tab (hiding and unhiding) ? If not then try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ -
I need help. I have a Window's 8 computer and a 6th generation Ipod nano. I have reinstalled Itunes multiple times and have read all the troubleshooting ideas to do it, but my ipod is still not being recognized. This is not the first time I've plugged the Ipod in. I need help
This came from another thread, but worked for me. Problem is with newest iTunes 4.62. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Device Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.
-
Since upgrading to iOS 5 and Lion, my iPod 4 calendar has become unusable. It will not sync with iCloud or my Macbook Pro. Suggestions?
Yes. I have already been through every online suggestion on the Tech Support page for iCloud. VERY frustrated at present.
-
IPod is not doing anything when plugged in...
When I plug in my iPod, it doesn't do anything. It just says "Please Wat. Very Low Battery".... When I've been charging it for a whole 24 hrs.
And on iTunes, it says "The iPod cannot be sycned. THe required folder cannot be found".
What do I do now?heres a screen shot, is there a file missing?
-
somebody can helpme please
Have you checked the cable ? Try another one as well as the charger. Look for any dirt or fluff in the docking port where the cable fits. If it still does not work, take it to an Apple store and get them to check it out.
-
Having trouble charging my IPhone4 with the charger from apple and the charger i bought from sprint. I plug it into the apple charger and nothing happens. if i plug it into the charger from sprint it says charging not compatable with this accessorie? should i take it in for repair or try a new charger??
Try a different charger pref an apple one if it stays the same take it in to be checked
-
As stated on the question I have windows 7 and meet all the requirements. But when i launch firefox It wont start, but it shows in task manager with 108k memory.
Got the exact same problem aswell, finally fed up with it now as i just started up firefox and 14 new windows opened because of this bug, luckily my computer can handle them but someone with a slower processor it would have been a nightmare, needs fixing ASAP.
Reverting back to 3.6.3 until this issue is solved. (link for anyone wanting to do the same below)
http://www.filehippo.com/download_firefox/7345/ -
Hello. I have Windows Vista, and get ERROR 7 (Windowns error 126) when I try to download the latest version of Itunes. This has never happened before for the Apple downloads. What does this error mean, and how do I get the 64 bit Microsoft upload?
Sincerely,
Jenn LSee Troubleshooting issues with iTunes for Windows updates.
tt2
Maybe you are looking for
-
Can I print out the list of Dictation commands?
I use dictation a lot but I can't memorise all the commands until I've learned them. The trouble is that to find out what they are, I have to go into system preferences, and from there to Accessibility, and from there a whole series of other steps be
-
HT202157 can i update the ipod touch second generation any higher than 4.2
can i update it and or is there going to be one coming out at all
-
<?xml version="1.0"?> <RECORD EXT_SOURCE="DEFAULT" TEMPLATE="Emp"> <TABLE_NAME>Employees</TABLE_NAME> <COLUMN> <COLUMN_NAME>COURSE</COLUMN_NAME> <COLUMN_VALUE>Some&Value</COLUMN_VALUE> </COLUMN> </RECORD> I want to parse above XML file, but I am gett
-
Plz Solve this Error in " Client Side Address Validation in Struts "
Hi, i have created struts project and foll code is written as foll : plz find out error in code : struts-config.xml code <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE struts-config PUBLIC "-//Apache Software Foundation//DTD Struts Configuration 1.
-
liquify is not working when i open it is all black my video card version is 8.9 using inspiron 15r