TS1398 I have followed all instructions and still can not connect to my WiFi. We have 3 other devices in the house that connect automatically. Help.

I have followed all of the suggestions to troubleshoot the inability to connect to the WiFi in my home. We have 3 other Apple devices that connect automatically. What do I do next?

in Settings>WiFi  - you've got it turned on right ?
Do you see your network in the list "Choose a Network" ?

Similar Messages

  • My iphone 5 died last night while I was sleep. I have had it on charge all day and still has not came back on. I also tried to hold the sleep/home button. Is there anyway I could get my phone back on?

    my iphone 5 died last night while I was sleep. I have had it on charge all day and still has not came back on. I also tried to hold the sleep/home button. Is there anyway I could get my phone back on?

    Did you try to connect in recovery mode, explained in this article?
    If you can't update or restore your iOS device

  • I have an Ipod 5 and you can not listen to music unless you have headphone plugged in

    I have an Ipod 5 and you can not listen to music unless you have headphones plugged in

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar

  • I want to prevent MyDay from starting up when I switch on.  I have followed all instructions for doing this, but to no effect.  I have unlocked and relocked.

    I use an Macbook from 2006 with OS X 10.7.5
    MyDay starts up every time I switch on.  I don't use it, so want to remove it from the list of programs which start automatically.  I have followed all instructions for doing this, and have of course unlocked and relocked the relevant page in Systems Preferences, but the instruction never 'sticks', and MyDay still starts every time.  Anyone know what to do?

    Check StartupItems...
    Open a Finder window. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following:
    /Library/StartupItems
    Click Go. If you see any reference to MyDay, delete it. That does not delete the app Just keeps it from launching when you startup your Mac.
    Just to be sure, you checked System Preferences > Users & Groups > Login Items   ??
    Unlocking or locking the padlock icon only prevents other users from changing your preferences.

  • Firefox unable to connect after brand new first time installation, IE can load fine, I have followed all directions for firefox can not connect but other programs can, and it did not solve the problem

    I have downloaded Firefox for the First time, Firefox can not connect to any website (Unable to COnnect), but IE can. I have followed all the directions on the page for firefox can not load when other programs can (Firefox connection settings,IPv6,DNS Prefetching, firewall settings)
    == This happened ==
    Every time Firefox opened
    == I downloaded it for the 1st time ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729; MSN Optimized;US)

    http://support.mozilla.com/en-US/kb/Firewalls
    http://support.mozilla.com/en-US/kb/Cannot+connect+after+upgrading+Firefox
    http://support.mozilla.com/en-US/kb/Error+loading+web+sites
    http://kb.mozillazine.org/Error_loading_websites

  • HT1386 i have followed your instructions and still i cannot add my itunes library from laptop to iphone

    I have gone over these instructions numerous times and I still cannot add music from itunes library on my laptop to my iphone. What am I doing wrong?

    Is it on a NTFS drive?
    Mac can read but not write to NTFS, and it does not see all NTFS drives equally well.
    To write to NTFS I use and recommend Paragon Software $20 NTFS for Mac OS X.         
    Ideally move iTunes to a Mac HFSX format drive though.

  • TS1368 Have followed all instructions - but still cannot connect to itunes

    I dont know what to do - I have done everything in all of the instructions on how to connect to itunes....but to no avail. This is arecent problem. It just started happening to me - on my Mac Pro.
    I have spoken to Comcast, I have rest my Network, I have deleted files, I have updated to the latest version, reset my password, and several other things. I am not sure why Apple doesnt want me to connect.
    Seems like I am asked to update itunes every week but they cannot figure out how to connect me to the itunes store. Sigh.
    I support Apple - but  I am happy to start to buy music on Amazon.com if Apple cannot figure this one out. Seems like miloipns of others have this same problem and nothing happens.

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Tried all suggestions for removing Babylon - PLEASE HELP. Followed all instructions and still comes back

    I have tried all the suggestions I can find - none work. Happened before and it went after following the suggestions - guess they have found a way to subvert those - can anyone help?? PLEASE

    needed to remove "browser manager" in control panel. Sorted now

  • HT2105 For some reason, I do not see my iTunes balance listed anywhere. I've followed all instructions and still nothing. What's up???

    This was not an issue before. Now, all of the sudden, I cannot get my iTunes balance anywhere. My last purchase was actually charged to the credit card on file and it did not default to using my remaining balance. Very frustrating...

    Hello ingishi
    If you have an available balance, it will show up next to your Apple ID when looking at it within iTunes on your computer or iOS device. Check out the first two articles to review and make sure that you have an available balance to spend. If you do and you were billed incorrectly, then report the issue to the iTunes Store by following the steps in the last article.
    iTunes Store: How iTunes Store purchases are billed
    http://support.apple.com/kb/HT5582
    iTunes Store: iTunes Gift balances
    http://support.apple.com/kb/ht5035
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Regards,
    -Norm G.

  • What to do next if you follow all steps and still can't the iPad out of recovery mode?

    I followed all steps by ensuring I downloaded the latest version of iTunes but to no avail, my iPad 2 is still in recovery mode. I refused to give greedy arse  Apple anymore money which I know is their ultimate goal...What to do??? I know there was a tech person on here, Techmadness I think was his/her screen name and he/she mentioned something about "firmware"...Please help somebody, anybody, someone, anyone

    I think that you want to try DFU mode whcih is Device Firmware Upgrade.
    http://www.imore.com/tip-put-iphone-ipad-dfu-mode

  • HT1430 Following these instructions I still can not reset the iPod.

    It still reads iPod disabled, connect to iTunes.  I have connected to iTunes and no luck.  Please help

    Placing your device into recovery (DFU) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • I have followed all suggestions. Still can't fix the problem. After an update, my profile seems to be blocked.

    My Toshiba laptop went through 45 updates, and now when I open Firefox (where ALL my bookmarks live) the program freezes after a few minutes. I get error messages about my profile, and errors about Firefox already running. I tried the suggestions above, but they don't seems to line up with my system. Windows8 is my OS. This query is on another laptop.

    hello rgneb, can you see if those problems continue after you update to firefox 37 beta 6?: https://www.mozilla.org/firefox/beta

  • I have updated my PSE9 and still can not open the RAW files from my new camera, I get an error?

    I bought a new camera (Canon T5i) and took photos in RAW, tried to open them in PSE9 and they wouldn't open. I got the following error...
    Canon RAW Codec found a new CR2 file that is not supported by the installed version.
    You can download the Canon RAW Codec update program from the link below.
    (Canon Server)
    I have been to the link & downloaded what update it had. I have also done the available updates on my PSE9 and I am still getting this error messge. When I called Canon regarding this they said I needed to contact Adobe.
    Can someone please tell me what I am doing wrong or not doing so I can open these files???

    The T5 is supported by Camera RAW 8.4 which needs PSE12. You can use the Canon software to convert RAW to TIF or the Adobe DNG Converter. The converter will convert the CR2 files to Adobes RAW DNG format that will open in PSE9's RAW processor. http://www.adobe.com/uk/products/photoshop/extend.displayTab2.html#downloads.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • TS2570 I am getting runtime error R6034 when opening iTunes i have followed all instructions on reinstalling and it still occars

    I am getting runtime error R6034 when trying to open iTunes I have followed all instructions for reinstalling iTunes but it still occurs can any help please?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99537)

  • HT201210 during a software update on my ipad it crashed.  I can no longer see it in itunes. and the picture on the ipad shows the cord and the itunes icon.  I have attempted to restore following all instructions and nothing helps.  any advice?

    I attached Ipad to my computer to sync.  I received a message indicating there was a new version of the software.  During the update, the Ipad crashed.  The screen on the ipad is showing the iTunes icon and the USB cord. The ipad no longer shows up in my devices.   I have followed all instructions online to reset the ipad,and I uninstalled iTunes and reinstalled it.  No change. The same screen appears on the ipad within seconds of turning it on.

    Same here.  And iTunes doesnt recognize the ipad anymore, even though it works fine with my iphone.  Plugged the ipad into my other laptop, i get the recovery mode message, but nothing works.
    Tried calling apple support, but since my 90 days of free phone service is past, those morons want me to buy applecare.  Yea, ill pass. 

Maybe you are looking for

  • Problem with Java and Memory

    hi, i have 512MB Memory in my pc, but the SUN ONE uses only 64MB. i dont know where is the problem. is it in the Run time of java of in the GUI Studio from Sun? how can i increase the number 64? i do nothing eccept java on this pc. thx

  • Hp psc 1110 all-in-one

    My printer : hp psc 1110 all-in-one When I switch on the printer the power to the printer just comes and goes off immediately. Tried the steps as in the video , but no solution. What should I do. Do you have online chat for help ?

  • No cellular data connection

    All of a sudden my cellular connection stopped.  iPhones and other tables on the same Verizon plan work fine.  Rebooting didn't work.  Turning cellular data off and back on didn't work either,  Verizon hold time is so long!  Any ideas appreciated. 

  • Why cant I update Quicktime

    When I click on iTunes from my Macbook it tells me to update to 7.5.5 or later so it told me to go on Apple.com/quicktime and I did. But it doesnt give me the option to update it only tells me that quicktime is already build in the macbook.

  • How can get & use java true type fonts in my applets

    Hi I could get the System fonts in my Applet by making use of Toolkit.getFontList() I have used getGraphicsEnvironment to get fonts but my browser doesn't support it.I get ClassNotFoundException. How can I get & make use True Type Fonts in my Java Ap