TS1398 wi-fi network not providing an internet connection

wi-fi network not providing an internet connection
I have done everything there is to do. Reset my netgear reset password etc and still no connection. I use to have connection but got a new I pad and can not set it up.

You may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the "i" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Do not reset your router. Next, reset network settings on your iPad (Settings > General > Reset > Reset Network Settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

Similar Messages

"The Wi-Fi network you selected is not providing an Internet connection. Change your settings or choose a different network."

Why is my iPhone 4s suddenly giving me this error message. The laptop and desktop I have connected to the router work fine. I have erased the iPhone and restored it at least four times and have tried all the other suggestions listed by Apple.
Not too happy with this piece of equipement. Never have been.

Cycle power in your network router. Make sure it has its latest firmware.
If that doesn't solve it, next try resetting your iPad. Hold the on/off and power buttons together for about 10 seconds till the Apple logo appears.

HT5704 I have an iPad mini, but it will not let me update. It is saying that I do not have an internet connection, but I am connected to the wifi. I have tried on 2 different wifi networks and I do not have internet service-it's wifi only. How do I update

I have an iPad mini, but it will not let me update. It is saying that I do not have an internet connection, but I am connected to the wifi. I have tried on 2 different wifi networks and I do not have internet service-it's wifi only. How do I update?

Please download iTunes from Apple.com and then sync your ipad.After which your ipad will appear on the right hand side upper corner of iTunes.Select your ipad and click check for update,once update has been found click update and follow the steps after that.

Open Directory is not providing a secure connection

I've been setting up Yosemite Server, but I haven't been able to get a second Mac to join onto the Open Directory service. When clicking Join… in Accounts Preferences on the client machine, and entering the address, it asks me whether I want to trust the server's certificates, which I do; and then, in a second dialog, it says "This server does not provide a secure (SSL) connection. Do you want to continue?"
My question, simply, is how do I confirm that my server is providing a secure Open Directory connection? If it's not, how do I enable it, and if it is, how do I convince my client to use it?
Background:
After doing the initial setup, I turned on Open Directory before noticing that the host name was not correct—I had not changed it from "Xxx.local". So I changed it to the correct domain as pointed to by an external DNS server. It mentioned that I'd have to reconfigure a number of services, Open Directory among them. I turned Open Directory off, then on, and confirmed in the Certificates section that all services were using the newly-generated certificate with the correct domain name. I turned on Profile Manager, and added a test network user, and an encrypted-only (SMB3) share for its home folder. For good measure, I turned on the Websites service.
At several points along this process, I tried to get the client to join the server's Open Directory, each and every time with the same message that the server does not provide a secure connection. I removed the applicable certificates on the client and tried again, just to be sure it wasn't using an outdated version of them—to no avail. The error is exactly the same whether I use the global .com hostname, the .local hostname, the global IP, or the local 10.0.1.x IP.
The server is running Mac OS X 10.10.1, and the client MBP is on 10.10.
The client is currently on the local network, but I aim to use Portable Home Directories and sync from other locations, so an unsecured OD connection is obviously unacceptable.
Any advice would be dearly appreciated!

First, follow the instructions in this support article to configure the clients to use the server's certificate to bind via LDAPS. The common name in the certificate must match both the server's hostname and its domain name, as resolved by the clients. You will get nowhere if those conditions aren't met.

Connected Touchpad to Work Computer now I get "Network Login Message" No internet Connection

I tried charging my Touchpad on my work computer the USB icon showed up on TP. After charging, I could no longer access the internet. I'm constantly getting Network Login required, No internet connection.
I have no problems using at home or at various hot spots, but at work, no matter what I do I get the same message. I've tried to power off/on router.. didn't work. Rebooting my TP.. didn't work. Changing Chanels on Router.. didn't work. I don't know if a factory reset is needed or the doctor fix is needed. I read just about every post on this form, but I 'm a novice and am having difficulty turning the tech talk into layman's terms.
Additionaly, I would like to know how to make my TP more useful with regard to using on the Android market, but I don't want to brick the unit. I purchased in 2011 to use at work and can't use it due to the problems listed.

I'm not sure what the fix is for the network issue at work. Does the TP even recognize the network at your office? You could try a full erase reset as a less-drastic step than doctoring.
As for Android on your TP, it is not officially supported here, but I can tell you that it's the bomb. I have CM9 on one TP, and CM10 on another. They both work great, very stable. Suggest you check out CM9 here, and and CM10 here. Beyond that, it's pretty much self-help on installation. Of course, it is also at your own risk.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Sony Vaio not recognising Wifi/Internet connections since System Refresh ... Help!

I'm using Windows 8.1 on a Sony Vaio SVE1512C6EW. It was running really slow, so I did a System Refresh and deleted a few programmes. Now it is not recognising Wifi/Internet connections and Audio doesn't work. I don't know if I deleted the driver or it was the refresh. Please help!

Hi nickisheps,
Thank you for visiting Sony Community!
Here in Sony Support USA for Vaio, we do not recommend System Refresh right away since your issue was slow performance. You could uninstall programs and check for viruses/malicious programs first, running Vaio or Windows update, etc. You are right about drivers. There is a possibility that some drivers and software are not properly installed or was deleted after the refresh. You may try this first: Go to Device manger -> Network adapter -> select the name of the adapter -> right click and select Uninstall (DO NOT DELETE). Restart the laptop. The default driver will be reinstalled. You may do the same process in Audio, just select Sound, video and game controllers. Check again if you the will connect to the internet.
If none of these work then you need to visit Sony's website (based on your location or from where you purchased the unit) and download the needed drivers.
Since your Vaio SVE1512C6EW is not a U.S. model and we have limited information about your unit and we do not have the drivers and software that support your computer. We kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/.
Hope these help.
Best regards,
Vincent
If my post answers your question, please mark it as "Accept as Solution"

Adobe creative cloud desktop is not detecting my internet connection?

adobe creative cloud desktop is not detecting my internet connection?

i connected with the adobe people through 'contact an agent'.
very helpful, they remote managed my desktop to fix the issue.
apparently something to do with permissions not activated for adobe, not sure how and why this happens though, or why it was fine earlier and suddenly stoppped.
they insisted it was to do with being on a wifi connection but that's not possible because i have my laptop right next to my desktop and that was working fine.
it took about four hours to fix though, so be patient!

How can I install Firefox on a server that does not have an internet connection?

I run Firefox on a server to display graphs for a program. I was able to save, upload and install Firefox version 21 on my server because it used the executable installation program. Versions 22 and 23 use a stub program that goes to the internet and installs the program. My server does not have an internet connection, so the stub program does not work. Can I get a copy of the executable program that installs the program without having an internet connection?

hello pkautzman, the full install packets that are capable of an offline installation are available at https://www.mozilla.org/firefox/all/.

Does not see my internet connection

I have downloaded the trial of XI but still I cannot sign in to complete the downloaded
the installer does not see my internet connection
I have blocked the firewall and antivirus but still cannot sign in
it says my clock is not correct?

The path to this file on my Windows 8.1 computer is:
C:\Users\Steve\AppData\Local\Adobe\OOBE
where my username is Steve.
Windows 7 will have the same sort of path. Windows XP won't.
AppData is a hidden system folder so it may be invisible in Explorer. Just go ahead and type in AppData in the Explorer address bar after you've clicked into your user folder and it should work.

Turbotax does not recognize my internet connection

I installed Turbotax 2010 from a CD and when I try to update it I get the following message: Error 42016: Unknown error
Further messages indicate that The Turbotax program does not recognize my internet connection. I do no t have this problem with other programs. Turbotax tells me it is a Comcast problem.
Comcast tells me my internet connection is fine.
I am at a loss.

I might have found a solution,that works for me with windows XP. First restart the computer and don't start up itunes. Open Norton Internet Security and click on Status and Settings. Then click on personal firewall and then click on Configure, and click on the Programs tab. Scroll through the list of programs until you have goten to Apple itunes. Change the interntet Access to Permit All. Once you have saved these settings start up itunes. That worked for me. Please tell me if this helps anyone.

I have downloaded itunes, however everytime I open it up deos not detect my internet connection even though it is running?

I have downloaded itunes, however everytime I open it up deos not detect my internet connection even though it is running. I can goto other sites when I open up explorer, but itunes just will not connect. Could someone assist? I have windows 7.

Set it up with SMB compliant names.. that means, short, no spaces and pure alphanumeric.
Set a different name for 2.4ghz and 5ghz..
Set security to WPA2 personal with pure alphanumeric password.. 10-20 characters is usually plenty.
Set wireless channel for 2.4ghz to manual and try channels 11, 6, 1 in that order.

Itunes does not recognise my internet connection

hi ive bin trying to connect to the itunes radio service but it always comes up with a pop-up saying that it does not recognise my internet connection.... any tips

hi........try this......
tools. internet options. connections. Lan settings. uncheck proxy server if it's checked.that works for me. good luck.

Cannot access web. Network diagnostics says my internet connection appears to be working correctly

Am running Lion on MacBook. Suddenly cannot access web with Safari or Firefox. Email OK and Network diagnostics says my internet connection appears to be working correctly". No problems with my iMac on same network.

What exactly happens when you try to load a web page?

How can I use an Airport Express to join my wireless network and provide an internet signal to my Power Mac g5 via an ethernet cable?

I have a power mac g5 that does not have a wireless card, and connects to the internet via ethernet cable.
I want to know how to set up an airport express so that it joins my wireless home network and provides the G5 with an internet signal.
This via an ethernet cable that is plugged into the airport express and then into the ethernet port on the g5.
Please advise as I have configured the airport express in every way possible, the green light is on and when I plug the ethernet cable into the G5 my network cofigurations shows nothing and says that the ethernet cable is not plugged in (It is).
I get an internet signal if the ethernet cable is plugged directly into my wireless router, so the ethernet port works.
Please assist. Thanks.

Two requirements that must be met to do what you want.......
1) An AirPort Express 802.11n must be used. Check the Model No on the label on the side of the Express. It needs to be A1264. Any other model number will not do what you want.
2) The Express must be configured to "Join a wireless network" and the option to enable Ethernet Clients must be checked.
Open AirPort Utility and click Manual Setup
Click the Wireless tab below the row of icons
The box to "Allow Ethernet Clients" must be checked
Please check to verify that your AirPort Express meets both requirements

TS1398 wi-fi network not connect

WI-FI NETWORKING NOT CONNECT CIRCLEING AROUND

i still have the same problem.... mine to, keeps circleing.... the icon for the wi-fi shows ( next to the carrier ) but it still searches for the network... usually, right after it finds it a check mark appears.... this time, i keep getting a circle.. this is happening at work...
this past wekeend, i had the same problem at home. My wife had no problem with the wi-fi on her i-phone but mine was circleing....i turned off the router for a couple of minutes, the iphone found my netwrk, i entered my password and it worked.... but this time i'm at work and it keeps doign the same things.... it sees the network, i've entered the password but it keeps circleing... just last week it was working with no issues at work....

TS1398 wi-fi network not providing an internet connection

Similar Messages

Maybe you are looking for