TS1424 The latest iTunes update appears to be for 64bit processors; I am trying to update a 32 bit processor with no success. How do I reload the 32 bit iTunes software?
The latest iTunes update appears to be for 64 bit processors, I am using 32 bit software. I need to reload my 32 bit iTunes software but I am encountering failure messages... "Service 'Apple Mobile Device failed to start. Verify that you have sufficient priveledges to start system services. How do I verify the priveledges and load my software?
Hello DavAM,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Restart the Apple Mobile Device Service (AMDS)
Set the Apple Mobile Device Service Startup type to Automatic
Remove and reinstall iTunes and AMDS
Best of luck,
Mario
Similar Messages
-
In mail how do I get the latest emails to appear at the top of the column automatically. At the moment I have to scroll up from the bottom oldest entires to find my latest mail arrivals
What device are you using?
I assume you are talking about something other than the iPad?
Is there a sort order above the date column? Clicking on this can switch between Ascending and Descending order. -
My mac is the OS X 10.8.3. I tried to update the latest Adobe flash player and kept getting 'Actionlist not found.' I have uninstalled, enabled and disabled plug-ins and am still unable to download the update and now have no flashplayer at all. Help!
PS I'm still new to Macs so the more broken down the better.Adobe Flash Player 11.8.800.42 is the most recent version from Adobe. It is a pre-release version. I am using it without any noticeable problems.
The current stable version is Download 11.7.700.169. -
How to fix my phone its stuck on the itunes and charging cable screen...? Iwas trying to update to io6.1 it said i needed to update it.
http://support.apple.com/kb/HT1808
maybe you'll have to do that more than once -
why does itunes say i have the latest version 4.2.1 (8c148) for my 3rd gen iPod touch when it should be iOS 5?
Be sure it is really a 3rd gen. Some people with 2nd gens were told they were 3rd gens. Identifying iPod models or Look up specs by Serial Number. If it is a 2nd gen, then you can't upgrade.
IF IT REALLY IS A THIRD GEN iPod Touch, then you first need to upgrade to iTunes 10.5 in order to download iOS 5 because older versions of iTunes don't support and can't sync with iOS 5. -
my iPad has been stuck on the apple loge for almost 10 hrs after trying to update, how can this be fixed?
You may have to restore your iPad using Recovery mode, but try a reset first. Hold down on the sleep and home buttons at the same time until the Apple logo appears on the screen. Let go of the buttons when you see the logo. This takes about 10-15 seconds.
IF the update will not complete or you see the connect to iTunes message on the screen, you have to restore your iPad.
If you can't update or restore your iOS device -
my iPod touch 4th Gen currently on 5.0.1
if i download the latest 6.1.3 will GoogleMaps for iPhone be downloadable/usable too on an iPod touch?
i'm hesitant to update to the latest 6.1.3 software as i find Google Maps on my 5.0.1 very usableYes:
Requirements: Compatible with iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5, iPod touch (3rd generation), iPod touch (4th generation), iPod touch (5th generation) and iPad. Requires iOS 5.1 or later. This app is optimized for iPhone 5.
https://itunes.apple.com/us/app/id585027354?mt=8 -
I installed the latest version of ibooks on my ipad. I have about 50 different collections of scanned pdf's. I can only view up to the letter M. Any idea where the rest went? These are client files. Help!!!
I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6. -
My G5 PowerPC still works great, but what is the latest OS that is possible. I just bought a new HP Printer and it is not compatible with OS 10.4. Is there any hope?
A PPC G5 cannot run any version of OS X beyond Leopard 10.5.8.
You should be able to find a Leopard retail (black) install disk on eBay. A grey update disk is machine specific and won't work. -
after installing the latest upgrade firefox just hangs when opening - was fine before. have tried deleting restore session but worse not better now. no change with firewall.
== This happened ==
Every time Firefox opened
== yesterday, after installing the upgrade ==
== User Agent ==
Opera/9.80 (Windows NT 5.1; U; en-GB) Presto/2.5.24 Version/10.54I'm using Mac OS 10.4.11 & even typing this message the characters appear so slowly that I could get a hammer and chisel and inscribe the words faster than the new Firefox runs. WTF?
-
I have now downloaded all of my CD's to my itunes library and have since only purchased new music using itunes Store. This itunes library is stored on an old Dell Desktop that I am getting ready to replace with an iMac; how can I move the music? 86GB
Is the music I downloaded from my CD's already in the iCloud or only the music I purchased on itunes?This might help: http://www.macworld.com/article/1146958/move_itunes_windows_mac.html.
-
My mother used to be the bill payer on my iTunes account so now every time I send an email from my iCloud account it sent with her name, how can I change the settings so emails are sent from myself?
I've changed the bill payer to myself but it stills says on emails that I sent that its from my mother.In order for the "From" field to show you options on the "from" addresses available, you must set them up in the Preferences > Accounts first.
I can't show you a screen shot of the from field because I currently only have one account, so the from address used is the default. However, when I had more than one, then options will show up in your compose/reply window.
You'd need to add an account here: -
I downloaded and installed Airport Express Utility 5.6 to get my old Airport Express to work with the latest Mac OSX 10.7.4, but when I install and run it, it still says my Airport Express is out-of-date and needs the 5.6 utility. What's up?
It is likely that you downloaded AirPort Utility 5.6.1. If you checked the requirements, this only runs on Leopard or Snow Leopard Macs.
You have Lion, so you need AirPort Utility 5.6 for Mac OS X Lion -
Adobe wont update my CS 5, it says i have the wrong serial number. I have 2 serial numbers with my account, how do i switch the serial number in CS 5 to the other number?
David,
To switch, I am afraid you will have to reinstall using the other one.
But that should hardly be necessary.
If you can find no way, you may try a chat here,
Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
or Adobe Support (phone) here,
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html -
How do I/can I re-order pages scanned into a PDF file in the latest Android version of Adobe Reader for my Galaxy S3?
No version of Adobe Reader can re-order pages. You can do this with Acrobat, however (for Mac and Windows).
Maybe you are looking for
-
My motherboard went bad on my old computer, but the hard drive was OK. I purchased a new computer and hooked my old hard drive to it through a usb adapter. I would like to import or copy my bookmarks from the old hard drive to my new one, but I canno
-
I am having trouble with actionscript. I am making a photo gallery and my buttons and layout are just dandy everything's looking fine. The buttons do nothing, and i know i need actionscript to make it work but i have no idea how to even begin. I have
-
PLEASE HELP: How to format ext HD with Disk Utilities (FAT32 format)
Hi, Please help. I need to format a 360 GB Lacie Hard-drive on FAT32 format. How can I do it with the Disk Utilities Application? I tried but only see Apple extended, extended (journaled), MS-dos, and others, but no FAT32. Also, if the Hard drive has
-
Can't download the latest Itunes
I am trying to get the latest version of itunes but it keeps giving me an error message that says the feature you are trying to use is on a network resource that is unavailable. HELP!
-
Unique counts - across a group by
I am attempting to count unique patients that stay in the hospital. But they want the count by months. I only want the patient to count in the first month. is there a good way to do this. for example if I have a table like: CREATE TABLE "PATIENT_CHAR