TS1538 Running Windows XP,Ipod Mini works fine,but Ipod Nano visible in Windows,but not Itunes.Have loaded latest version of ITunes.How do I prceed

Am running Windows XP pro,Ipod Mini works fine,but Ipod Nano is visible in my computer as a mass storage device,but not in Itunes.The settings on the Ipod says Version 1.0.2 Mac.Have tried all the trouble shooting solutions under Itunes help,but no success.Is it a problem with the Ipod or my Windows computer?Please help.Thanks Marcus.

http://support.apple.com/kb/TS1363

Similar Messages

TS3989 Cannot get Photo Stream to sync on Windows 8.1. Shared streams work fine, but not personal stream. ANYONE please advise...

Cannot get Photo Stream to sync on Windows 8.1. Shared streams work fine, but not personal stream. ANYONE please advise...

Videos in a shared Photo Stream can only be streamed, they cannot be downloaded.

I am running windows xp. Trying to download latest version of iTunes and get error message: Microsoft Visual C Rundtime Library. Runtime Error. Program:C\ProgramFiles\iTunes\iTunes.exe. R6034 An appliction has made an attempt to load the C runtime librar

I am running windows xp. Trying to download latest version of iTunes and get error message: Microsoft Visual C Rundtime Library. Runtime Error. Program:C\ProgramFiles\iTunes\iTunes.exe. R6034 An appliction has made an attempt to load the C runtime library incorrectly. Please contact the appliction's support team for more information.
2nd/ message: iTunes was not installed correctly. Please reinstall iTunes. Error 7(Windows error 1114)
I have removed iTunes serveral time and tried to reinstall many times and get the same results noted above.
Can anyone help me? Thank you. EFS1

Hello DrJMDDC,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
1. Remove iTunes and related components from the Control Panel
2. Verify iTunes and related components are completely uninstalled
3. Reinstall iTunes and related components
Best of luck,
Mario

Hi, when I download wmv video files, I cannot get any sound. Youtube videos work fine but not wmv files? can somebody help please

Hi, when I download wmv files on my MacBook Air I cannot get any sound on the videos. Youtube videos work fine but not wmv files. Can anybody help please?

Install Flip4Mac which allows you to play wmv files.

Extenstion update window keeps popping up; I have loaded latest version of Firefox as prompted to no avail

extension update window keeps popping up when I am in Outlook email environment; I have loaded latest version of Firefox as prompted to no avail

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Trash the current Firefox application to do a clean (re-)install
*Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Every Time i go into itunes and try to update my ipod it says i need to connect to the internet. But my internet is just fine i am running on ios 4.3.5 old i know and as far as i know i have the latest version of itunes. Please help

Everytime i go into itunes and try to update my iPod Touch 4th gen running on iOS 4.3.5 its says i need to be connected to the internet please check it or something like that and as far as i know i have the latest version of itunes

What is the exact wording of the error message?
Maybe this:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
Try disabling the computer's antivirus and firewall.

ColdFusion 4.5 & Oracle 8.1.6 - Both work fine but not together!

Hi everyone,
We installed Oracle 8.1.6 and ColdFusion 4.5 on RedHat 6.2. Both individually work fine, but we cannot get the combination to work.
SqlPlus gets a connection to a remote server, so the tnslistener configuration works. We tried both the ODBC and native drivers, but the connections never verify O.K.
The only thing we worry about is that the script that CF provides for relinking of the libclntsh.so stops with an error:
(...)/8.1.6/lib naldflgds not found
ld: cannot find -lsql
We already tried the suggestion of Borren Jeng (run gennaflg from $ORACLE_HOME/bin). Regretfully this gennaflg also doesn't exist, so this didn't work for us...
We really got stuck here, so any suggestions are greatly appreciated!
- Richard.

The naldflgds is only exist in V8.0.5.
Here is what yo can try:
you only need to do the folling things.
1. copy $ORACLE_HOME/lib/libclntsh.so to CFUSN/lib
2. you need to chmod for your $ORACLE_HOME directory to allow the Coldfusion owner execute the file under $ORACLE_HOME. I don't remeber what the exaclty number need for chmod on $ORACLE_HOME, but you can try
"chmod -R 8.1.6" (if you $ORACLE_HOME=/home/oracle/app/product/8.1.6 you should cd to =/home/oracle/app/product)This should work. but this cause another seurity issue.
The only thing we worry about is that the script that CF provides for relinking of the libclntsh.so stops with an error:
(...)/8.1.6/lib naldflgds not found
ld: cannot find -lsql
We already tried the suggestion of Borren Jeng (run gennaflg from $ORACLE_HOME/bin). Regretfully this gennaflg also doesn't exist, so this didn't work for us...
We really got stuck here, so any suggestions are greatly appreciated!
- Richard.
Originally posted by Richard ([email protected]):
Hi everyone,
We installed Oracle 8.1.6 and ColdFusion 4.5 on RedHat 6.2. Both individually work fine, but we cannot get the combination to work.
SqlPlus gets a connection to a remote server, so the tnslistener configuration works. We tried both the ODBC and native drivers, but the connections never verify O.K.
null

CR08 report published on BOEXI works fine, but not on CRS08 (JDBC conn)

CR08 report published on BOEXI works fine, but same report published on CRS08 does not work (JDBC connectivity)
The workflow is:
1 - Crystal Report was created using CR2008 using JDBC connectivity,
2 - Published on BOEXI, and
3 - Same report accessed through InfoView
Remark - the report works fine.
The very same .rpt when published on CRS 08, throws an error;
1 - Crystal Report was created using CR2008 using JDBC connectivity,
2 - Publishing it on CRS 2008, and
3 - Same report accessed through InfoView
Remark - The report does not open (Error: Failed to open the connection.... )
If the publishing of reports take place from CR08 to BOE XI and could be successfully viewed in InfoView, then why cannot the same rpt be viewed in CRS 2008 InfoView.

Moving to BOE forums.

Ipod touch works fine but not nano?

Heya,
I've got a 4th generation ipod that I bought for my dad and I have an ipod touch (1st gen). I have no problems w/ the touch as it is easily recognised in iTunes however the ipod nano is not being recognised at all either by Windows 7 (64-bit) or iTunes. I didn't have this problem in Vista with the nano at all.
Does anyone have any idea what could be the problem? I don't think it's the apple usb driver as the iPod touch is detected and can be sync'd. I've disabled all other services to try to narrow it down and still no luck.
Anyone have any ideas on how I can fix this problem?
Thanks in advance.

I have no problems w/ the touch as it is easily recognised in iTunes however the ipod nano is not being recognised at all either by Windows 7 (64-bit) or iTunes. I didn't have this problem in Vista with the nano at all.
Hmmm. The touch uses the Apple Mobile Device Service for syncing and whatnot, but the nano would be using the iPod Service. So if there was trouble with the iPod Service on the PC, you could have trouble with your nano even though the Touch is working fine.
Let's have a look at your iPod Service in Services.
In your Start menu, right-click "Computer" and select "Manage". Expand "Services and Applications" and click "Services". Maximise the Window so you can see what's going on.
Find the iPod Service in the list of services. What is currently showing up next to it? For example, I see "Started" and "Manual".

When I hit reply in hot mail... only about 1/3 of my old email follows me to the reply screen.... it does this only on my notebook but is fine on my desk top... both run windows XP and both have the same version of firefox

I have an ACER notebook running XP and a HP desk to running XP... both run the same version of Firefox... on the notebook when I'm in an email (MSN) and hit reply only a portion of my existing email will go to the new reply screen..... and when I try to scroll down it stops part of the way down and won't let me see the complete email, let alone add a reply at the bottom....
Yet my desk top works fine..... Help please.... [email protected]

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Home sharing working fine - but not for paid itunes content on some devices

My setup is a simple apple home sharing network.
I have a mac mini running OS X 10.6.8 and itunes 11.0.3(42) it hosts a lot of music, DVD's that have been re-encoded and paid for content from itunes.
The mac mini is conntected to the network over a very good gigbit lan and has 4 apple TV3 (latest gen) hanging off the network, and multiple PC/Mac/ipod/ipad devices hanging off the network.
All these devices connect using home sharing and work very well (I can use all 4 apple TV devices at once streaming 1080p media with no lag / delay problems)
There is one exception to this, my PC and Mac.
I have a Macbook pro running OX 10.6.8 and itunes 11.0.3(42) and a PC running Windows 7 64bit with Itunes 11.0.3(42). Both are also connected via gigabit lan, both run of SSD's so have excellent local disk performance, both have over 6 GB of ram at least.
If I open itunes and connect to the itunes home media server and play music, tv shows films all is well, ranging anything from a DVD rip to a HD bluray rip. as soon as I try to play a HD movie or TV show downloaded from itunes there is a problem. I get approx 30 seconds into the content and then it just stops as if I'd hit pause and never actually starts playing.
At first I thought this was buffering problems/flooding on my lan, so I isolated this, even though my network monitor shows lots of capacity on the lan, I removed all devices apart from the mac mini serving the home media and either the PC or the Mac, I hit the same problem.
To diagnose this further I opened a network monitor application on the PC, the playback mac and the media server mac mini and tried to open a file in itunes.
on the client and the server the network spikes straight away, and uses 100 network for around 5 seconds (if I do this with other devices such as apple TV's plugged into the network too the overall usage is lower, it basically uses as much as is availble, so %100 utilization isn't a problem) and then the network traffic just stops on both devices. The same is true of the disk activity, I see a raise is disk I/O on the home media mac mini for 4 - 5 seconds and then a lesser spike on the local playback machine both stop after 4 - 5 seconds in sync with the network stopping.
Both machines remain on the network fine, but the transmission of the media between itunes server and client just stops. I then open another file, a bluray rip, some music etc, and it plays works fine, return back to the paid for itunes content, it fails at exactly the same spot.
This happens on any itunes paid for HD movie or TV shows, so it's not just one file, it's approx any of the 200 itunes downloaded HD files I have on this machine.
I can play the files fine with apple TV's, I've tried watching 4 different apple downloaded itunes HD films at once on 4 apple TV's it works fine, it's only if I open the file via itunes with the PC or Mac.
All are linked with the same home sharing account so it's not / shouldn't be a DRM style issue.
Why is this happening on the more powerful PC/Mac computers, but not on the lesser apple TV, ipad, iphone devices ?

going to try to bump this to get some traction / suggestions on it

IChat used to work fine but not any more - suggestions?

I've used iChat for about 1 year very successfully but recently video chat has stopped working. I have a MacBook Pro that doesn't work and a PowerBook where it still works fine.
Both have the same system and iChat software. Both are on the same wireless network. The Powerbook can connect to collegues and also the Apple test users (appleu3test01, 02, 03 etc.) while the MacBook Pro no longer connects although it used to connect just fine.
Symptom: I've tried having the MacBook request a conference with the PowerBook and the PowerBook never realizes that the MacBook requested a conference. When I try to initiate the conference from the PowerBook to the MacBook the MacBook never acknowledges that there has been a request. If I try to connect to appleu3test01 iChat on the MacBook displays
"Waiting for response..." for as long as I leave it the request window open.
It seems my MacBook Pro can no longer initiate nor recognize a video chat. (text chat works fine)
Given the above situation I have not tried to modify my router settings nor look into what my service provider might be doing - after all, everthing is still working great on one of my Macs.
All I have done is to try the old school Mac trick of deleting preferences. Specifically the com.apple.iChat.SubNet.plist, com.apple.iChatAgent.plist, com.apple.iChat.plist plists. That made no difference.
If anyone has any suggestions for me I would be very grateful.
Thanks in advance

I share that funny feeling but:
10.4.3 is to long ago for me to know whether it is within reach of the backward compatibility specifics of 10.4.10, the machine specifics, the routers settings and it's performance in combination with the italian provider and the policy they have towards their subscribers. Just to give an example, apparently the Powerbook does video chat, the MacBook doesn't The QT version that currently is downloadable has system requirements that ask for 10.4.9 as a minimum. And that is just a detail.
A little change to your settings could solve this, but I advice you to to a reset of your network hardware, and update them one by one to the current release versions of their hard (firmware) and software. Check the site of the ISP and router for advise on their current network mode. Write down their details, and your required input network access. Unplug the devices. Leave them a good 15 minutes to power completely down. The device that comes first in contact with the internet connection needs to be plugged in first. Wait till the lights are blinking stable, now connect your MacBook Pro direct to the Ethernet port of the Modem (?) and log in to the interface of the device by typing it's IP address into Safari. Choose easy set up, and you will be asked to input the information you have previously checked on your ISP's site. Check if the firmware corresponds with the version you looked up on their site. It probably will mention if there is new software available and it will take a minute. After the device has restarted, connectivity is confirmed. Click an internet site in safari, and walk through the network diagnostics windows to set up a stable network conform ISP advice. Now the second mac needs to start, select a site in safari, if it needs diagnostics it will ask, respond in accordance to join the network you just have set up.
Some possible trouble causes to look at as well:
Channel settings used by the american sold Extreme is not set to a number that the Italian bought Express automatically switched to as interference was eminently asking for. (Or vice versa and variations on the theme)
Encryption running on the MacBook Pro could cause the problem etc.
The MacBook Pro has an Extreme card. The Powerbook has an Express card.
The Extreme is limited to the performance of the Express now.
Check the help feature as well, open iChat, select help in the top menu.
You need to have a valid internet account, and current up to date software & firmware.
Hope it covers your issue but if it is not solved please post back: Firewall or router settings are likely to cause these problems as well. I am not very good at those.

Airport Extreme N works fine but not when WDS activated

I replaced my old Airport Extreme by the new 802.11n.
Works fine with our Macbooks (pro) enabled for n.
But when I activate WDS (I'd like to use my old airport Express for airtunes sometimes), an error message appears (WDS error) in the summary, and the light flashes alternatively in green and yellow... Everything else seems to work (internet connexion), but it seems no WDS possible... If I swtich it off, everything is just fine and green...
Of course I reinitialized the base, I once used the Airport utility assistant and then manually reput my personal options. I upgraded my airport firmware to 7.1 and WDS error message is still there with the flashing light... And I tried to see if my old express would make it but nope.

I had similar issues. To roll the firmware back to an earlier version try this:
- With the option key depressed, launch the Airport Utility (located: /Applications/Utilities)
- Select your problematic extreme base station and then while holding option again, click "Continue" and then choose Manual Setup.
- It should prompt you to choose a firmware version to upload. You can select 7.0 or 7.1.
The process is a little different on PC. Let me know if this solves your problem or if you need the directions for doing this from within Windows!

BO method works fine but not the wokflow step.

Hi,
Just needed a suggestion. I have a PO attachment workflow. When i see the workflow log I see some error at the step check attachment. But when I run the step task method in this step seperately from BO, it works fine, i just pass the same container elements as i get in the workflow id to this method of the step.
So now any kind of hint what and where could be the problem. As I can see there is no problem with the task method.
Any guess?
Thanks,
AC.
Edited by: anu_SAP_123 on Jun 28, 2011 8:29 PM

Hi,
Just needed a suggestion. I have a PO attachment workflow. When i see the workflow log I see some error at the step check attachment. But when I run the step task method in this step seperately from BO, it works fine, i just pass the same container elements as i get in the workflow id to this method of the step.
So now any kind of hint what and where could be the problem. As I can see there is no problem with the task method.
Any guess?
Thanks,
AC.
Edited by: anu_SAP_123 on Jun 28, 2011 8:29 PM

Pdnsd works fine, but not after reboot

Hey guys, I just installed pdnsd and it works great, except that after each reboot, the server fails.
I've included it in my daemons array right after networking, and on reboot the boot messages show that it's starting successfully, but then it doesn't work and only gives a server failed error message when I run an nslookup or dig search.
Once booted, I can run /etc/rc.d/pdnsd restart and all is working fine again.
Anyone have any idea what the problem might be?
Thanks for any help.

skymt wrote:Did you get my email? I asked you to run pdnsd as root and see what errors it prints. I've also discovered since then that pdnsd logs to /var/log/daemon.log, so the relevant contents of that file might also be useful.
Yes, I did skymt and thanks for that. I got no errors at all and it ran just fine. I had already looked in daemon.log but didn't see anything that led me to a fix.
I've found that if I use the "none" option for uptest in the server section, everything works fine on a fresh reboot. Is there any problem with me using that option? Or would changing some other option fix it, perhaps?
All the permissions seem to be in order on all files and folders related to pdnsd.
Thanks a million for the reply and help.

TS1538 Running Windows XP,Ipod Mini works fine,but Ipod Nano visible in Windows,but not Itunes.Have loaded latest version of ITunes.How do I prceed

Similar Messages

Maybe you are looking for