TS1702 problems with flash based products not running on the ipad 2

I have problems viewing certain web pages in safari, getting the message that the laatest version of flash player is not loaded, does anyone have any ideas on how to resolve this?

No Flash for iPads, iPhones, or iPods
Here's why there's is no Flash available for iDevices or other mobile devices. Adobe was unable to provide a product that was suitable to the needs of battery powered mobile devices used for Internet browsing. Existing Flash technology used too much memory, ate battery life, and was buggy. Simply put Flash did not work well on mobile devices.
Apple's Steve Jobs led the escape from Flash dependency when Apple introduced the iPhone, and later introduced the iPad. There was a hue and cry over the omission. Time proved Jobs was right on target.
So this is why there is no Flash for your iPhone or iPad or iPod nor for most SmartPhones. Flash has been abandoned by many sites in favor of supported technologies such as HTML5 or by providing their own custom app.
Here is Steve Jobs official comment on his momentous decision to omit Flash from iDevices: Steve Jobs on Flash.
Here is Adobe's later announcement to cease development of Flash for mobile devices: Adobe on Mobile Flash.
Now, you are not necessarily out on a limb. There are some apps that can display some Flash, but don't count on there ability to display anything using Flash.
Apps that can display some Flash from the Web:
Puffin
SkyFire
Photon Flash
Browse2Go
iSwifter
Also, note that many sites that use Flash provide their own app for accessing their material. So check with your favorite sites and find out if "there's an app for that."

Similar Messages

Problems with flash in vista - Not IE RELATED

Just got a new laptop yesterday with:
vista home premium 32 bit
amd 64x2
1g ram
I like to play poker (just play money) on carbon poker and
poker.com
I installed the programs and went to play on them. The
program loads fine, functions fine in the menus and game lists.
But when I join a game (i.e. there are moving symbols-cards,
chips, chat bubbles) the game window freezes within 5-10 secs,
basically as soon as something on the table moves.
At this point none of the buttons in the table window work.
However, I can go into the lobby (no moving symbols) and exit the
program.
After exiting the program I get an error stating:
"this program requires a missing windows component" blah blah
the details state:
"this program requires flash.ocx, which is no longer included
with this version of windows"
The solution tells me to install the latest version of flash,
which I did.
Same problem.
I have tried uninstalling flash and installing full version
(separate file, not browser based install) - no luck
I have tried installing flash 7 and 8 - no luck
I have tried copying flash9.ocx and renaming it flash.ocx -
no luck
I have tried setting program to run compatible with win xp
sp2 - no luck
I have searched every forum, google search string, adobe, and
ms sites - no luck
I have tried installing a version of carbon poker from vista
downloads - no luck
As far as I can tell, this program needs flash to function
properly in the games. I don't know if there is a problem with
where vista puts flash and the program is looking elsewhere for it
or what.
Can someone please help me figure out how to get these
programs to run? They are not browser based, they are separate
programs run from an exe.
Thanks in advance.

Tech support told me the problem could be caused by flash
unexpectedly terminating. Is there any way to prevent this from
happening? The laptop is a Compaq and came with shloads of garbage
software on it that could be causing the complications. Any
suggestions on where to start? Thanks in advance.

Problems with Config Tool; ADS not running

Hello everyone,
I'm trying to create an Interactive Form, but I get the following error
com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (404) Not Found.
I assume that Adobe Document Services is not running. I typed http://localhost:50000/AdobeDocumentServices/config in my browser. The result was an Error 404, too.
In a documentation sheet about administration of ADS, I found that service IIOP in the config tool should be set to startup mode "always".
When I tried to apply the changes in the config tool, it terminated with a critical error. Logfile says the following:
Error occurred while working with Configuration.
com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred during DB access: ,
     at com.sap.engine.core.configuration.impl.persistence.rdbms.UpdateProcessor.flush(UpdateProcessor.java:294)
     at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.commitConfigurationHandler(ConfigurationCache.java:1217)
     at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.commit(ConfigurationHandlerImpl.java:833)
     at com.sap.engine.configtool.batch.task.TaskUtil.changeProperties(TaskUtil.java:335)
     at com.sap.engine.configtool.batch.task.ChangeServicePropsTask.go(ChangeServicePropsTask.java:64)
     at com.sap.engine.configtool.batch.task.TasksThread.run(TasksThread.java:46)
Caused by: com.sap.dbtech.jdbc.exceptions.BatchUpdateExceptionSapDB: [-3018]: Invalid numeric parameter(input position 2)
     at com.sap.dbtech.jdbc.CallableStatementSapDB.executeBatch(CallableStatementSapDB.java:649)
     at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1102)
     at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1066)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.DBAccessDefault.execInsertEntryBatch(DBAccessDefault.java:1170)
     at com.sap.engine.core.configuration.impl.persistence.rdbms.UpdateProcessor.flush(UpdateProcessor.java:257)
     ... 5 more
What can I do about the two problems?

Just for the sake of learning how to use the tool i start with drawing a rectangle then click and drag the gradient tool across the box. i see the gradient line appear but when i release the mouse the gradient line disappears
i end up witha box with a gradient but all my editing has to be done in the gradient box as shown in this screen shot:
What I'm wanting to achieve is how the lades hat is edited in this video Working with gradients | Visual Design CS4 | Adobe TV

Problem with JuniperSetupClientInstaller. Does not run, only save option

Firefox is a optional application used in our organization. There about 2000 Firefox users. We have VPN portal running from web interface, which uses Juniper Client to connect intranet. Until Firefox version 6 it was working ok. Since Firefox 7, whenever we launch the portal, instead of running the add-on JuniperSetupClientInstaller.exe automatically, it asks to save file. I save it, run it and relaunch the Firefox and go to the portal. And I get the same "Save" prompt. The site requires Java and this plugin. Java is installed but I can not get this plugin work. It works fine with IE and it works in Firefox with "IE tab 2(3.5.9.1)" enabled for this site, which is pretty much the same IE running on the background

Do you have the latest update? how accurate is your GPS?
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Can Firefox Sync be set up between two Mac computers, both with Firefox v36, but not running on the same OS X versions?

I have a MacPro desktop (10.8.4) and MacBook laptop (OS 10.6.8). Both have the latest version of Firefox (v36). I've noticed some of the add-ons for one is not available for the other. How will Firefox Sync handle this? Can Firefox Sync be safely set up?
Thank you,
no1uno

'''''"To give one example, one of the add-ons in the laptop is 'SEO for Firefox 3.6.4'. It seems this add-on is not available for (or compatible with?) the more recent OS of the MacPro. How would Firefox Sync handle this? "'''''
I don't even see an extension by that name at the official Add-ons website - AMO. https://addons.mozilla.org/en-US/firefox/
If you installed that extension from anywhere except for AMO I would expect Sync to just ignore it.
''I have at least a half-a-dozen extensions that don't get sync'd, because they aren't available from AMO - they were installed from the author's own websites.''
As far as how Sync would handle versions of the same extension, but for different operating systems or OS versions - I would like to see an example of such an extension, that is the exact same extension ''[but maybe different version numbers]'' that is hosted at AMO.
Also, Sync doesn't actually "synchronize" extensions, it "installs" the same extension that is "noted" as being installed on one device, and installs those same extensions on the other devices that don't have the same extensions.
And that creates another problem ''[IMO]'', the preferences don't get "sync'd" '''''if''''' an extension isn't specifically made to be compatible with Sync. There is no "standard" at AMO for add-on extension authors to "tell" users that their extension is specifically compatible with Sync, as far as synchronizing preferences and "data" is concerned.
One example is - https://addons.mozilla.org/en-US/firefox/addon/greasemonkey/ - '''yes''' it is Sync-compatible and the GM scripts do synchronize, but the AMO page says nothing about that "feature" being available. Also, Adblock Plus is partially compatible - but only as far as the Filter subscriptions are concerned, none of the user created "custom" filters are synchronized.

SPM 5.2 - problem with reason/activity fields - not showing in the report

Dear experts,
I have a situation that is hard to describe.
We have SPM 5.2 - all set and working, now the problem is that for some of the FF sessions the tool is either not reporting the reason/activity fields (due to some technical problem that is occuring randomly) or the users have found a way to abuse the fields and make thier way around them. (these fields are very important for our SOX controls)
I have created test users to see how they are entering without filling the reason/activity fields, but no luck - i couldnt enter.
As you know the Activity field is mandatory text field and at least one character must be entered, but I don`t think this is the workaround, because even if you put space the report still will show it. I have examples where the report is not showing anything.
The worst is that I can`t simulate such cases.
Have you ever heard of such nosense?
Thank you,
Iliya

I think I found it - Application deficiency. It is the language that you are logged with. If it is not English the application is not recording the text that you type in the reason/activity fields upon FF session.
I hope the latest patches are fixing this!
BR
Iliya

Anyone had a problem with Micro/Smart sims not fitting in the Iphone 4s Tray?

Just got the Iphone 4s did the whole process of cutting up an original sim to fit, finally went to the phone shop to get a Micro sim just incase the cut sim was doing damage or not fitting correctly only to find that the Micro sims wont fit into my 4s. Compared my tray with my sisters 4S tray and it is smaller??
Very confused so rang Apple who told me I would have to try and make it to one of their shops during a weekday as those are the only free appointments currently, They stated they could not send me a replacement tray without charging me, unless I make the very large effort of going to my nearest apple store when it suited them.
Not very impressed with this as I heard Apple were **** hot at customer service, this is all after spending 50 mins talking to them
Has anyone else experienced this sim fitting problem ?

Hi pamellag,
Here is some information on iPhone batteries that may help you:
Apple - Batteries - iPhone
http://www.apple.com/batteries/iphone.html
One of the side notes states:
Charge Cycles
A properly maintained iPhone battery is designed to retain up to 80% of its original capacity at 400 full charge and discharge cycles. You may choose to replace your battery when it no longer holds sufficient charge to meet your needs.
The 'replace' link above leads to some options if you need to get the battery replaced:
Apple - Batteries - Battery Replacement
http://www.apple.com/batteries/replacements.html
Cheers!
- Ari

Why does my iphone5 have problems with internet based apps and browsing after the 6.1.2 update?

Hi,
I am having major issues accessing the internet and loading web apps after the 6.1.2 update on my iphone 5.
Anyone else having the same...have tried all th usual resets etc.
So frustrating - why can't Apple test software releases properly!
Vivek

hi
The problem is specifically on Wi-Fi, the apps that are persistently causing issues are:
Safari
Email
Facebook
Twitter
You Tube
The App store
BBC Iplayer
I keep restarting the phone which helps temporarily but then the Apps get timed out again. Looks like it cannot retrieve data over Wi-Fi.
Thanks for your help so far.
Vivek

After the recent update I am having issues with Flash based games freezing and not responding.

After the recent update I am having issues with flash based programs not running or loading correctly. The programs will not load or take an extremely long time to load compared to jsut a few days ago. This happens across the board on anything flash based. Also, once they do load they will freeze, stop responding or need to be constantly refreshed to come back alive which is short lived at best. I went thru the help and did all the file deleting, cache clearing, disabling hardware acceleration, removing then reinstalling flash, and even removing and reinstalling my browsers. None of this has helped at all. I am using Chrome and it is up to date and I checked my Flash player and it is up to date. I am running windows 7 64bit.

Here's what you're up against guys,
Adobe writes the base code for Flash Player, and then hands it off to Google, who adapt it to a PPAPI plug-in (it's NPAPI when Adobe writes it). It's then "PepperFlash" and Google embeds it in their Chrome browser. While Google is pushing a "webwide" move to PPAPI Flash Content, a reinvention of the wheel so to speak, not everyone "got the memo", and Google is slowly making it so that PepperFlash will block NPAPI Flash content from running properly, and you have to disable PepperFlash to force the NPAPI plug-in to work, which sometimes fixes it, sometimes not. I have a feeling this is only going to get worse. HTML5 will eventually resolve the video end but game developers need to come up with something that won't require a plug-in.
And to the first post: Since PepperFlash is embedded in Chrome by Google, you can uninstall and reinstall Flash Player from here until your hard drive literally seizes up.... guess what? It has NO EFFECT at all on the PepperFlash plug-in in Chrome because it's a separate file in a separate folder and the uninstaller & installers don't have anything to do with it.

Running into Problems with Flash Player with some sites and not others

Hi All,
I've run into problems with Flash Player 10,0,45,2. In IE 8, FF 3.6.3 and Google Chrome (which I downloaded as a last ditch measure), some websites (such as youtube) work fine. Other sites such as wimp.com I get an empty box. I've reinstalled flash, but haven't seen much else in these forums to try to figure out what the problem is.
Any help would be greatly appreciated.

Bump.

Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative.

Who else has a problem with parental controls enabled not being able to run Firefox on the Mac?

Who else has a problem with parental controls enabled not being able to run Firefox on the Mac? (Any solutions?) (BTW. Chrome doesn't work either)

Although FF4 is so nice I'm almost ready to ditch iGoogle!
Please fix what appears to be an RSS/iGoogle issue with FF4...
Gmail is fine, but titles dont show in most RSS feed gadgets and no stories, strangely, apart from this one:
http://www.google.com.au/ig/directory?hl=en&url=www.google.com/ig/modules/builtin_news_technology.xml
Which if you enter the last part of the url reports that
"<Content type="html">
This is a builtin module, so the UserPrefs and Content are ignored."
Any ideas?

Problems with Flash Video

OK - I have had intermittent problems with Flash video, basically it gets choppy, usually after about 20 minutes - half an hour of watching - recently this problem has gotten worse - coinciding with a recent system update perhaps? - it's more or less anytime I stream something, and it happens on all browsers, even when the movie has clearly downloaded and is buffered way in advance of the playhead.
On 2 occasions recently leaving the movie to play just to see what happens has led to a kernel panic.
I've heard alot about Flash video generally being a resource hog and not playing ball sometimes - is there a way to solve this issue? Things I have tried - reset sound to 16 bit 44.1 khz in audio/midi manager; fixed permissions; run Tech Tool - everything seems to be fine hardware wise - I think there are some incompatible driver issues that are meesing up RAM usage but have no idea what or how to solve this... Any ideas anybody?
Thanks.

If, as you show, you are running 10.5.2, that is out of date. You need to install the 10.5.8 combo updater.
It is also possible that your FlashPlayer is out of date.
The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

YouTube Problem With Flash

Ever since I downloaded the latest Flash version...Version:
9,0,115,0 I cannot upload videos to YouTube. When I get to the
upload page and click UPLOAD it just sits on connecting forever.
And if I let it sit there for an hour or so it will eventually say
there is a problem with the Flash Player. Any idea on how to solve
this?

Hi!
I'm able to see version (9.xxxxxx...something - the newest -
today updated).
Have horror with flash-based chat. I read in one topic here
in IE problem is not! But i somehow can't login to this service
with IE I had. Now I'm trying to download newer version and will be
checking with it. Futhermore after this check I'll try how it looks
in Fedora (if You Adobe support it - have no idea of this!)
Not only I have this problem. I try on some polish forums and
users write they are experiencing sample problems.
My YouTube problem isn't with uploading (once I tried I felt
too). It freezes on some place and not move even a little. I really
can't remember what happen in a day, when it started but I fell it
takes too long to be a problem with YouTube.
People say it's Flash.
P.S. sorry for my english

Problem with replication based on materialized view

Problem with replication based on materialized view...
Given:
1. Source: S-1
2. Targets: T-1, T-2
3. DB links: from T-1 to S-1, from T-2 to S-1
Required replicate table TBL on S-1 to T-1, T-2 via db links.
On S-1 was created materialized view log with PK on TBL. On T-1, T-2 were created mat.views as "on prebuilt table refresh fast on demand". In case of get "ORA-12034: materialized view log younger than last refresh" or initial load - perform complete refresh. Initial load on T-1 takes about 1 hour, on T-2 - about 12 hours. Refresh is executed via job with minutely interval. If refresh is running then it is not performed.
Problem: after initial load on T-1 performs fast refresh, but on T-2 raised ORA-12034 and complete performs again.
What's wrong?

34MCA2K2, Google lover?
I confess perhaps I gave a little info.
View log was created before MV.
It was the first initial load.
No refresh failed.
No DDL.
No purge log.
Not warehouse.
There is no such behavior for MVs on another sites.
P.S. I ask help someone who knows what's wrong or who faced with it or can me follow by usefull link.
P.P.S. It's a pity that there is no button "Useless answer"

TS1702 problems with flash based products not running on the ipad 2

Similar Messages

Maybe you are looking for