Since upgrading to LR 5.6 I can no longer change paper sizes for user print templates.

The print preview window shows the new size laid out properly but the printer feeds only the size which was used to create the preset resulting in clipping if a larger paper and cell size is invoked in page setup or xs white space if a smaller is invoked. OS X 10.8.5, Stylus pro 7890. REINSTALLED PRINTERS AND DRIVERS, DELETED AND REPLACED LR PREFERENCE FILE, Other aps print ok. I

While the problem is unsolved I have found a workaround. If I use the "Printer" button (lower far right) and print from the printer dialed pop up custom paper sizes chosen in the "page setup" are honored and the layout prints as shown in the LR print preview). On the other hand, If I print using the "Print" button the printer feeds only the paper size chosen when creating the preset.
Bob H

Similar Messages

Ever since upgrading to iTunes 11.0, I can no longer sync Contacts and Calendar from my iMac (10.7.5) To my iPad2 (6.0.1) via Wi-Fi. I believe All my settings are correct. Device is recognized and sync From iPad is possible.

Ever since upgrading to iTunes 11.0, I can no longer sync Contacts and Calendar from my iMac (10.7.5) To my iPad2 (6.0.1) via Wi-Fi. I believe All my settings are correct. Device is recognized and sync From iPad is possible. Tablet is past warranty, so TechSup won't help. Any suggestions?

Thank you Meta, but I could not get the calendar and contact sync with Gmail to work. Apple support already suggested to use Google or a Windows PC. Maybe I should actually reset and try my old Windows PC. Seriously, ... can this be the solution after a Mac OS update for pure Apple users?

TS1717 Since upgrading my ipad to os7 I can no longer get my ipad to load up my music from iTunes. Same with my ipod. I have an iMac OS 10.5.8 Help desperately needed please

Can anyone help please.? Since upgrading my Ipad to OS 7 I can longer access my music on iTunes. iTunes says upgrade to version 11.1 but my IMac will not allow this. My Ipod won't upload either. Help!

You need to buy a Mac OS X 10.6 DVD, install it, and run the 10.6.8 combo updater. Mac OS X 10.6 requires a Mac with an Intel CPU and at least 1GB of RAM.
(94902)

Since upgrading to iOS 6.0 I can no longer complete my connection to my co/govt email. Any thoughts?

Cannot connect to my co/govt email since upgrade to 6.0. Anyone else have this prob?

This comes from the iPhone Manual for iOS 6. It applies to iPad also, but the iPad Manual for iOS 6 has not yet been released:
VPN
VPNs used within organizations allow you to communicate private information securely over a non-private network. You may need to configure VPN, for example, to access your work email. Ask the network’s administrator for the settings necessary to configure VPN for your network. After one or more VPN settings are defined you can:
Turn VPN on or off: Go to Settings > VPN.
Switch between VPNs: Go to Settings > General > VPN, then choose a configuration.
See also Appendix A, iPhone in Business, on page 141.
iPhone in Business
With support for secure access to corporate networks, directories, and Microsoft Exchange, iPhone is ready to go to work. For detailed information about using iPhone in business, go to www.apple.com/iphone/business.
Using configuration profiles
If you’re in an enterprise environment, you may be able to set up accounts and other items on iPhone by installing a configuration profile. Configuration profiles let your administrator set up your iPhone to use the information systems at your company, school, or organization. For example, a configuration profile might set up your iPhone to access the Microsoft Exchange servers at work, so iPhone can access your Exchange email, calendars, and contacts, and it may turn on Passcode Lock to help keep the information secure.
Your administrator may distribute configuration profiles by email, by putting them on a secure webpage, or by installing them directly on iPhone for you. Your administrator may have you install a profile that ties your iPhone to a mobile device management server, which allows your administrator to configure your settings remotely.
Install configuration profiles: On iPhone, open the email message or download the configuration profiles from the website your administrator provides. When you open a configuration profile, installation begins.
Important: You may be asked whether a configuration profile is trusted. If in doubt, ask your administrator before installing the configuration profile.
You can’t change the settings defined by a configuration profile. If you want to change settings, you must first remove the configuration profile, or install a new configuration profile with the new settings.
Remove a configuration profile: Go to Settings > General > Profile, then select the configuration profile and tap Remove.
Removing a configuration profile deletes the settings and all other information installed by the profile.

Since upgrading to 5.0.1 I can no longer "search" within my AOL mail to find a specific address that I have recieved mail from

I use ALO and like to search my old mail to bring up all the mail I have received from a particular person. Since upgrading to 5.0.1 I always get the notice that there is no match for the email that I try to search. I know this is not true. How can I get the search engine back?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Since the recent Firefox update, our customers can no longer place items selected for purchase into the shopping cart; what is the cause and the fix?

Since Firefox was recently updated, customers who use Firefox as their browser can no longer place items selected at our e-commerce site into their shopping cart. We are not experiencing this problem with customers who use IE as their browser.

I created a brand new blank Captivate 6 file, applied a theme, inserted a few new slides and tried Preview. It worked! All four of the Captivate files I used in my previous testing were based on one file which hadn't been touched for two weeks. Somehow while working in the lastest file, either removing unused items from the Library or killing errors while Publishing, something somewhere got corrupted or removed. Something that all four files must have pointed to, since as soon as the latest file broke, all of the other files stopped working as well. Since the original file was inherited, I'm not even sure how to go about finding the problem. In my case, it won't be too big of a deal. I will create a clean template file and rebuild.
Thanks for your help!

Since upgrading to 3.6.13, i can no longer open tabs using the extension, only by right clicking on the open page, and then not always. I've had to go to Chrome as i can't get firefox to work.

Firefox worked great. I have been using it for years. When i completed the recent update to 3.6.13, the new tab button/extension little + box quit working. I can click and nothing happens. I right click, get the drop down menu but nothing works. I cannot open a blank tab or windwo as when i want to go somewhere new without closing windows i have open. The only way i can access a new tab is if i go to my bookmarks and open one then use that screen to go where i wanted to go. I've had to switch to Google Chrome to complete tasks i need done online, but it doesn't let me do a lot of what i want to.

I'll try to make this clear. I USED to be able to left click on a hyper link and the hyper link would open in a NEW tab. Now for some unknown reason the hyper link by default opens in the same tab (window). I have to right click the hyper link in order for it to open in a NEW tab. (Yes, my 'tools'> 'options'> 'tabs' are set to "open new windows in a new tab." (Please no answers telling me to get rid of the Ask toolbar because I don't have one.) Thank you.

HP Officejet 7500A Wide Format - Can't reset the paper size - won't print!!!

I have a new HP Officejet 7500A Wide Format All-in-one printer. I love it and have had no problems with it...until now. The other day I went into Photoshop and printed a 4x6 photo and now my printer will not allow me to print on 8.5X11. I have checked the paper size in Photoshop, Word, Excel, Acrobat...everything I used that day, but it all shows "letter" size paper in the properties. I also checked the printer utilities...letter size paper is selected.
But when I try to print, the printer and the computer both give me a "paper mismatch" error and my only option is to change the paper or cancel. I went back into photoshop again and was able to print a 4x6 photo again - once I put in 4x6 paper - but then I changed it back to an 8.5X11 size photo sheet and tried to print on letter size paper and..."paper mismatch'.
I changed the printer back to factory settings. Nothing. I just had to reset up my printer on my network, but it still won't print. I tried to re-install the printer software from the installation disk, but it won't install. It says "already installed".
HELP!!!!!! I honestly don't know what to do at this point!!!!!
Thanks in advance!!

I have struggled with a similer problem with my new 7500A. I've done all the things you did. I made sure I had all updates and the firm ware update. I spent time on the phone with a lady who meant well but clearly didn't know the product. I had a difficult time communicating with her. Her accent was in the way. This morning I realy didn't want to face another day of this struggle. As I walked into my studio I had a idea. Instead of going to the computer to try to solve my problem through menues, HP Customer Service and or communities. I went dirrectly to the printer. I turned the printer on, the little screen on the printer lit up I touched the arrow to go to the next screen of menus. I touched "Set Up" then scrolled down through the choices. I picked "Preferences". At the bottom of the list was.............. Media Width/Type Sensing (ON)............I promptly turned it (OFF) ......................I am printing as I was told I would be able to do prior to buying. I am not getting that anoying screen "Paper Mismatch" . The printer is printing now on my 12 x 12 stock regardless of the type. ie: cardstock, plain paper, colored paper, construction paper. I hope this helps some of you out there. Clearly HP was of "NO" help to me. I have read that others are installing HP 7000 drivers etc. I've solved the problem without going to those lengths, no thanks to HP.

Since upgrading to os 10.6, I can't drag email addresses into my address book

Since upgrading to OS 10.6, I can no longer drag email addresses into my address book. Is there a quick way to restore this function that had worked in OS 10.4 but is apparently disabled in 10.6? Is there a work around someone figured out that's quick? I wish Apple would send out a patch to fix this problem. Any news on this front?

James,
Although slightly different than the problem you are having, perhaps 10.6: Change Mail's 'Copy Address' behavior - Mac OS X Hints will help with your problem.

How can I select paper size while in print preview ?

I have a printer with four different paper trays, and each one is loaded with different size of paper: A3, A4, Legal, envelopes. When I use IE 11, I can easy go to print preview, click on page setup (little gear icon), select paper size , margins, etc.. there, and when i hit OK, the page is adjusted to the settings I selected and its ready to print, and printer selects the proper size of the paper automatically
In Firefox v32, I can almost do this same, but I'm stuck with printing only on A4 style paper, as I don't see where to select the paper I want to print on !
I tried to select A3 and legal paper in the printer driver, but then firefox used the selected paper, but printout on the paper came out as set to A4 size, and rest of the page was empty ! Also I was not able to see the page preview of the selected paper either. How do I then print on other size papers than a4 ?
I found only one workaround which does not suits my needs but works: First: Go to printer driver and select legal or A3 paper as default, and then open firefox. If I do that i can print on any paper I select, but thats a horrible workaround, because then I often forget to change the default paper size back inside the printer driver, and i print my documents on wrong paper, wasting paper, ink and time...
Please let me know if there is a way to fix this printing feature somehow.
Thanks.

MichalB,
Sorry, IMO there is no real "fix" for what you are experiencing. Printer prefs set or changed in the operating system won't affect Firefox printing ''[IMO, either ancient code in Firefox or a "cross-browser thing".]'' Firefox has its' own settings for prefs and it defaults to the "last used" for all printer preference setting. And there is no way to set a pref as "use now and return to my defaults after this print job is completed".
As you have found out, there is no way of changing paper size from the Print Preview screen. Other prefs - Margins & Header/Footer can be changed via Page Setup and you can see changes in the Preview window, but not for paper size. As ''CoryMH'' mentioned, '''paper size''' is selected thru what called the "native print dialog" box using the '''Properties''' button which shows a window provided by your printer software for the Printer which is selected in the "native print dialog" window, and accessed after you hit the Print button in the Print Preview screen.
Problem is that you can't '''"preview"''' what is going to be printed when you change paper size. If you go back to Print Preview without printing from the "native print dialog" the change for Paper Size isn't saved for viewing in Print Preview!
IMO, it would be nice if Firefox recognized each "tray" as a separate printer, so that a user could set Margins & Header/Footer prefs AND paper size per tray. IOW, a feature sort of writing a completely new print module that would reflect "today's" environment with multiple tray printers; rather than to continue using the print module that was built by Netscape back in '94 - '95, which we are stuck with almost 20 years later.
''As I sit here shaking my head after composing this reply, wondering why the issues I had back in 2002 with printing from Firefox / Firebird / Phoenix haven't been corrected in the last 14 years.''
''I do like "old stuff", and have a vehicle sitting my driveway that rolled out of the showroom 30 years ago come October 1 - a 35th birthday present I purchased for myself. [85 Corolla GTS TwinCam coupe - aka Sprinter in GTA] But as far as computer software, I prefer it to be compatible with hardware made in this century.''

HT1338 I can no longer AirPrint to my Dell AIO Printer since I upgraded to Mavericks. Any suggestions?

I can no longer AirPrint to my Dell AIO Printer since I upgraded to Mavericks. Any suggestions??

Okay. That is a good result. It proves you have a working network connection between the Mac and the Dell.
So with the printer not showing using Bonjour, you could try adding the printer manually. With Printers & Scanners open, click the plus button to add and then select the IP icon. You can then enter the IP address of the Dell. Set the protocol to HP Jetdirect-Socket. Leave the queue name blank. Change the Name from the IP address to Dell Wireless. Leave the Location blank and in the Use menu, select the model of Dell you have. Then click Add to complete the queue creation and then see if you can print.

TS3694 Since I upgraded to iTunes 10.7, I can no longer sync my iPhones nor my iPad. iTunes says "could not back up ... because a session could not be started". I'm on w7x64, updated.

Since I upgraded to iTunes 10.7, I can no longer sync my iPhones nor my iPad.
For all devices, iTunes says "could not back up ... because a session could not be started".
I'm on w7x64, updated.
I have already tried to re-install, reboot, stop/restart Apple mobile devices service, without success.
Thanks!

I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
I hope this helps you and any other users.

Since upgrading to windows 8.1 I can not see any local files in the files window.

I have recently upgraded to windows 8.1 and can no longer see my local files in the files window. All remote files for all remote sites are visable.
If I change sites under local view get error thet dreamweaver can not update cache

Thanks Nancy
It certainly worked in windows 8.
I have deactivated and am trying to reload software inside of windows 8.1.
Will let you know.
Thanks again
Terry
Date: Fri, 1 Nov 2013 12:13:57 -0700
From: [email protected]
To: [email protected]
Subject: Since upgrading to windows 8.1 I can not see any local files in the files window.
    Re: Since upgrading to windows 8.1 I can not see any local files in the files window.
    created by Nancy O. in Dreamweaver support forum - View the full discussion
I honestly don't know if DW CS5 is compatible with Win 8.1. The OS compatibility FAQ only mentions DW CS6 & CC.
http://helpx.adobe.com/x-productkb/global/windows-8-1-compatability.ht ml
Maybe someone else can shed more light on this.
Nancy O.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5807551#5807551
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5807551#5807551
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5807551#5807551. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Calls have been dropping out mid-call (after initially working) with full reception since upgrading my iPhone 4 to iOS5 (can hear them but they can't hear me).

Calls have been dropping out mid-call (after initially working) with full reception since upgrading my iPhone 4 to iOS5 (can hear them but they can't hear me). The call initially works but then after a minute or so, they stop hearing me, even though I can hear them. Sometimes it goes the other way and I can't hear them.
Please advise how to remedy ASAP.

PS: I have had full reception bars when this has occured on a 3G network in Sydney, Australia (3 Mobile).

After upgrading to 10.5.3 I can no longer login to my RedHat ES4 shares

Hello,
I am a new Mac user so please forgive me if there is a simple answer to this question...
Since I installed the 10.5.3 update over 10.5.2 I can no longer login/connect to my RH ES4 (SMB Version 3.0.10-1.4E) shares. I can still login to my CentOS 5 (SMB Version 3.0.25b-1.el5_1.4) and my older RedHat 7.3 (SMB Version 2.2.3a) shares, as well as a few windows shares, without any problem. It is just the RH ES4 shares that I can no longer connect to.
For legacy purposes I configured SMB on both my MacBook Pro and the above mentioned servers to use plain text passwords. To do this on my MacBook this I created nsmb.conf in /etc which contains the following...
[default]
minauth=none
Everything worked perfectly minutes before the upgrade to 10.5.3 and nothing else in the network, software or hardware, has changed.
Any help would be greatly appreciated.
Thanks,
Tom Boilard

Welcome to the forums... unfortunately SMB issues are not fully mainstream.
Anyhow, I have scanned the change log of files touched by the update (searching for SMB - original list courtesy of Rixstep). This yielded:
/Library/Preferences/SystemConfiguration/com.apple.smb.server.plist
/private/etc/smb.conf
/System/Library/CoreServices/SmbFileServer.bundle/Versions/A/Resources/DesktopDe faults.plist
/System/Library/LaunchDaemons/com.apple.smb.server.preferences.plist
/System/Library/LaunchDaemons/com.apple.smbfsloadkext.plist
/System/Library/LaunchDaemons/smbd.plist
/private/etc/smb.conf.template
/System/Library/Extensions/smbfs.kext
/System/Library/Extensions/smbfs.kext/Contents/CodeDirectory
/System/Library/Extensions/smbfs.kext/Contents/CodeRequirements
/System/Library/Extensions/smbfs.kext/Contents/CodeResources
/System/Library/Extensions/smbfs.kext/Contents/CodeSignature
/System/Library/Extensions/smbfs.kext/Contents/Info.plist
/System/Library/Extensions/smbfs.kext/Contents/MacOS/smbfs
/System/Library/Extensions/smbfs.kext/Contents/Resources/load_smbfs
/System/Library/Extensions/smbfs.kext/Contents/version.plist
/System/Library/Filesystems/smbfs.fs
/System/Library/Filesystems/smbfs.fs/Contents
/System/Library/Filesystems/smbfs.fs/Contents/Info.plist
/System/Library/Filesystems/smbfs.fs/Contents/Resources
/System/Library/Filesystems/smbfs.fs/Contents/Resources/English.lproj
/System/Library/Filesystems/smbfs.fs/Contents/Resources/English.lproj/InfoPlist. strings
/usr/lib/sasl2/smb_lm.so
/usr/lib/sasl2/smb_nt.so
/usr/lib/sasl2/smb_ntlmv2.so
/private/var/db/smb.conf
Items highlighted in bold could be relevant.
Have you checked that your entry in nsmb.conf is intact? If it is, could it be overridden by a change to one of the other conf files (or a plist)?

Since upgrading to LR 5.6 I can no longer change paper sizes for user print templates.

Similar Messages

Maybe you are looking for