TS2634 After I updated my Ipad2 to IOS6 my volume is not working so I can not hear anything. I turned it off and on but nothing changed. What should I do?
After I updated my ipad to Ios6 i can not hear people speaking anymore. The volume is to max but I can not hear. What can I do? Can I undo the update?
Did you try the mute switch above the volume button on the side of iPad?
Similar Messages
-
When I tried to update to OS6 on my iPad 2, it got as far as "Your iPad was updated successfully. There are just a few more steps to follow, and then you're done!" The Continue bar at the bottom turns blue momentarily, then back to white. Nothing happens. I powered off and back on, still nothing. When I use the "Home" button, it says "Setup incomplete" but won't continue. Any thoughts?
Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!
-
After a rescent update on my ipad 3 I can no longer connect to my pc with WIFI. I have tried resetting ipad and itunes but nothing works. Talked to support and they were no help. Any suggestions?
What error do you get if any?
Have you tried connecting to another network besides your own?
Do you use DHCP on your router or static IP address? -
Phone is not functioning and is stuck on accessing network since I tried to upgrade to iOS7.
Try a reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)
-
Can't hear anything on my iphone after syncing
Hey, someone please help!
I've just synced my iPhone and that was all ok. Now, I can't hear anything on my iPhone. It rings, but I can't hear the other person speaking, also when I make a call, I can't hear anyone unless I put it on loudspeaker!
I restored (and used the last backup I had before my sync just now) but it still the same.
Any ideas?Hello Angela,
Thank you for the details of the issue you are experiencing with sound on your iPhone. I recommend the following steps for an issue like this:
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, followthese troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
You can find the full article here:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Hello.
My iPad2 shows a message of iCloud"Ignore or Settings". When I press on either "Ignore or Settings" it does not do anything. The screen is totally frozen. I haved turned it OFF and ON , but message keeps coming back.
Any ideas?
Your help is highly appreciated.
Thanks,
CaroYou are still under warranty. Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired. -
I Updated my Ipad2 to IOS6 and unable to use Siri. I went to Settings> General and there was no Siri. I tried rebooting and had no luck. Any suggestions?
Yes thank god some people felt my frustration today. When I saw it said Siri on the update I was like finally. I tried finding it after the update and was so sad and ****** that it was to good to be true. With apple being so advanced and stuff this is stupid how the I pad 2 can't have it but a phone can. So stupid.
-
I have just updated my ipad2 to ios6.0.1 and now having problems with the MAPS APP. The standard view outlines the area, but it is blank, showing no text or roads. Anyone know how to solve this?
Have you tried a - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Cheers, Tom -
After I updated my iPhone4 into iOS6, all my applications crash on launch. I tried restoring it but same thing happened
you'll have to set it up as a new phone. You have no choice. If you've been using your phone as recommended, you should have little, if any, data loss.
-
I completed updating my iPad2 to ios6. I hv 11 app which need to be updated and these are flagged. But the updating procedures keep looping itself and I was not able to update any of the 11 app.? Why the update procedures keep looping and how to get out of it.
Okay - let's cut to the chase...
If the Menu Bar (File, Edit... Help) shown in my screenshot below is not visible, use CTRL+B to display it. Then click on Help/Check for Updates. If one is available, you will be able to select it at this time.
Note the item at the bottom of the list; About iTunes. Selecting that will show you which version of iTunes you are using.
An alternative method to display the Menu Bar is click on the box in the top left of your iTunes window... -
Have updated my ipad2 to IOS6 , but now Iam unable to make facetime over wifi ...it keeps displaying connection lost. please help.
Also my facebook application is also not working .it just hangs itself. tried uninstalling and reinstalling. yet it isnt working. please helpTry This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
Since updating my iPad 2 to IOS6 and activating my icloud for backup, my iPad has permanently locked. Message on screen is "iPad Not Backed Up". I click ok but no response. Cannot turn power off and cannot restore via my pc itunes. What are my options?
Thanks to everyone who responded and related subject helped. Holding the home button and power button simultaneously for 10-15 seconds does unlock the screen. I can now use my ipad again. However, a futher problem has arisen since updating to IOS6 and activating icloud at same time, Although not sure if its related. The problem is that when connected to my PC the itunes message appears 'Cannot read ipad'. It instructs you to restore but keeps timing out after about 1 hour. This maybe internet issue but can't understand why itunes cannot read my ipad. May need to completely erase all content & reset. Or any other suggestions why this has happened?
-
My Ipad 2 (after the latest update) is burning through battery...even when I am NOT on the Ipad2....I have turned it off and on again....no difference...what else can I try...seems like I live with it pluged into power.
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
recalibrate the battery, let the device run out of battery to where it shuts off and then fully charge it without using it. -
I lost the ability to use wifi after the 8.02 update. Is there a way to fix this? I've already tried resetting network. Turned the phone off and on. Nothing is working and now I have to run on just data.
csdwarf,
So sorry to hear about the trouble with Wi-Fi! Let's get that working the way it should. Could you provide us some more details regarding where this breakdown occurs? Are you having trouble with turning Wi-Fi on or connecting to your Wi-Fi? Are other devices connecting to your Wi-Fi without issue?
BrianP_VZW
Follow Us on Twitter @VZWSupport -
Hi there,
Can someone please help. My IPhoneS stopped working right after I did the latest update which was yesterday. Now, the phone does not work at all. When turned on, the screen shows a picture of USB cable pointing to the ITunes logo. I have tried just about everything, and cannot get it working. It's like it is frozon. My ITunes does not recognize my device. Cannot dial out either. I desperately need to get it working. Can someone please help me.
Thanking you in advance for your help. :-)The update did not do anything.
AT&T cannot and will not do anything, they do not provide support for iPhones, Apple does.
The issue is not with the iPhone or iOS if you've reset network settings and tried forgetting the Wi-Fi Network, it is specific to the network.
Check the settings on the router, try disabling the security settings first... that will clarify the issue is not with the device but rather the Network.
Maybe you are looking for
-
Where is the custom stamp location in Acrobat 9 Pro for Win Vista
Where is the custom stamp location in Acrobat 9 Pro for Win Vista?
-
Notifications are showing in my notification centre that birthdays are 1 day before they actually occur. Is this a general fault or can it be fixed? Also, the birthdays have been entered as part of the contact information, if this has any bearing on
-
When you find out that Muslims BE-HEAD gays, how long before you force THEM out of your pathetic organization? Huh?
-
Display download window from JSP
Hi, I hava a links to PDF files on a JSP. These PDF files are not in the web server virtual path. When user clicks a link in the browser then it should display download or open from current location window. How can I do this. Please help me. Thanks,
-
Abstract Class that implements Comparable
I am trying to understand how a comparable interface works with an abstract class. Any help is greatly appreciated. I have a class ClassA defined as follows: public abstract class ClassA implements Comparable I have a method, compareTo(..), within Cl