TS2771 I dropped my iPod touch in the ground and the screen turned blue and now it won't turn on what do I do

I was walking and I dropped my iPod and I picked it up and it was blue so I tried turning it back on and it wouldn't what do I do any help

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer          
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
  Apple Retail Store - Genius Bar              

Similar Messages

  • How do I fix my ipod touch when the screen turns green , buttons are unresponsive and can't connect to a computer

    My ipod display screen only shows a green light and the buttons are unresponsive. When i connected it to the computer , Itunes would not recognise it. Please can you help or seggest things that may help.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • HT4972 I recently restored my Gen 2 iPod Touch to factory settings and now it won't update from iOS 4.2, so none of my apps will install! Help!

    It's really bothering me.

    Many developers when they updated their apps to support iOS 5 and 6 dropped compatibility for iOS 4.2.1 and earlier.
    Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.

  • I restored my ipod touch to factory settings and now i can't get it to do anything. What do i do?

    I restored my ipod touch to factory settings and now it won't do anything. I need help to get it restarted

    Try a Reset...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy... See Here...
    http://support.apple.com/kb/HT1414

  • I dropped my ipod touch in the street and there is a large crack in the screen can i take it to the apple store and pay to have it fixed there or do i have to send it out?

    i dropped my ipod touch in the street and there is a large crack in the screen can i take it to the apple store and pay to have it fixed there or do i have to send it out?

    They can fix it at the Apple Store. I wish you could get it fixed for free, but the warranty doesn't cover accidents like this . It sounds like you understand this, I just want to make sure you know.

  • How can I unlock my ipod touch?  The screen is locked and has various languages on the sliding bar.  It wont let you touch it

    how can I unlock my ipod touch?  The screen is locked and has various languages on the sliding bar.  the screen is grey and the normal screen saver is gone.

    As a first attempt, try a reboot by holding both the power and home buttons untl the apple logo appears and it restarts, ignoring the red slider if that appears.

  • I HAVE AN IPOD TOUCH MC008LL / The screen is blank you can get your help to find out what happens

    I HAVE AN IPOD TOUCH MC008LL/ The screen (Display) is blank you can get your help to find out what happens please

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • How much does it cost to replace a iPod touch 5g. the screen is completely broke and digitiser and theres no front and back camera??

    how much does it cost to replace a iPod touch 5g. the screen is completely broke and digitiser and theres no front and back camera??

    Apple will exchange your iPod for a refurbished one for $99 for 16 GB 5G and $149 for the other 5Gs. They do not fix yours. Note the older 16 GB 5G has only a front camera and the other 5Gs (16 GB released late last month and the 32 and 64 GB 5Gs have both front and back cameras)
    Apple - iPod Repair price                                    
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens         
    Replace the screen yourself if you are up to it
    iPod Touch Repair – iFixit                  
    Identifying iPod models

  • Just got my ipod touch and the screen turned white what do i do?

    Just got my ipod touch and the screen turned white what do i do?

    Try a Restart and a Reset...
    Restarting your device
    1)   Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    2)   Press and hold the Sleep/Wake button until the Apple logo appears.
    Follow these steps to reset your device
    Note: Reset your device only if it is no longer responding and the steps above do not work.
      Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    Restart / Reset
    http://support.apple.com/kb/ht1430

  • I tried to update my ipod touch to ios 6 and now it wont boot past the apple icon. please help

    I tried to update my ipod touch to ios 6 and now it wont boot past the apple icon. please help

    Put your ipod in recovery mode and then restore your software again.

  • I dont know how i got my photos to my ipod touch from my pc and now i wanna delete them but couldn't. so need help. please let me know.

    i dont know how i got my photos to my ipod touch from my pc and now i wanna delete them but couldn't. so need help. please let me know.

    To turn off auto sync - launch iTunes and go to Edit>Preferences>Devices - check the box at the bottom that says - Prevent iPod, iPhones and iPads from syncing automatically. Click OK and then quit iTunes.
    Connect your iDevice to your PC.
    Launch iTunes,
    Click on the device name on the left side of the iTunes Window.
    Click on the Photos Tab in the iTunes window on the right.
    Untick all of the photos or albums that you want to remove.
    Click on Apply in the lower right corner of iTunes
    If you untick or uncheck the Sync Photos heading and then click Apply it will remove all of the photos from the device when it syncs. In this screenshot - I have only certain albums and events selected to sync.

  • Plz help Help I have accidentally deleted the var folder on my mac and now it won't start up what should I do?

    Plz help
    Help I have accidentally deleted the var folder on my mac and now it won't start up what should I do?

    /var is a hidden folder, so you mustn't remove the folder.
    The only solution is to reinstall OS X. If you have OS X Lion or Mountain Lion, use OS X Recovery > http://support.apple.com/kb/HT4718
    Hold Command and R keys while your MacBook is starting and reinstall OS X. You won't lose anything. If you have a backup, you can restore it after starting in OS X Recovery instead of reinstalling Mac OS X, so you will save a lot of time

  • Help I have accidentally deleted the var folder on my mac and now it won't start up what should I do?

    Plz help
    Help I have accidentally deleted the var folder on my mac and now it won't start up what should I do?

    Reinstall OS X.
    Reinstall Snow Leopard without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • I updated my ipod touch to ios 5 and now it wont restore and i can't get anything back...need help please!

    I updated to IOS 5 tonight on my ipod touch 4th gen and now it won't restore.  I can't get it to restore from a backup either.  It either says "iTunes could not restore the iPod "____" because the backup session failed or i get error -50.  It appears all of my songs and apps are in iTunes, but I guess I don't know where to go from here to get things back to how I had them before.  Is there a way to access an early backup to try that? or am I going down the wrong path? Any help would be greatly appreciated.

    don't ask me why this worked, but it did for me last night.  In iTunes, where your device shows up on the left side, I double clicked on it.  It then allows you to change the name like you can for changing file/folder names.  I changed 1 letter on the name of the ipod and hit enter.  I then right clicked on the new ipod name and chose restore from backup.  My choices for backup was the original name of the ipod only and not the name i had just changed it to.  I told it to go ahead and backup from the old name figuring I would get the same results, but not the case.  It restored it with all app, music and pictures with one exception...all of the settings, email setup and information within the apps was lost.  Atleast that an easier fix than starting all over.  Hope this will work for you guys too with the same issue.

  • I put my sons Ipod touch on Mobile Me and now its missing. I can not sign on to locate it now. How can I find it? Could you locate it?

    I  need help locating my sone IPOD Touch, It was on MolieMe but I can't find it. I don't know what too do. I think I had a different apply id but not sure. It migh have been under my daughters name Toni Beckman.  PLEASE HELP ME

    What happens when you sign into the me.com site and try to find the iPod when signed into the possible accounts that could have been used?
    If wifi is off, the iPod is not with range of a unsecured wifi spot or a secured one that will automatically connect, or somebody has turned off wifi or FindMyiPhone on the iPod or has restored the iPod, it will not show up in me.com.

Maybe you are looking for

  • Mac Mini doesn't see PC connected via AirPort

    I created a wireless network using the AirPort built into the Mac Mini. My PC laptop connects to this network, but I can't find the PC or any of its components from the Mac. I am new to AirPort so maybe I don't know where to look. However, it seems t

  • Fiscal year variant V3 not defined or maintained for date 01.01.2011

    Hi  Team, While doing "ABUMN" we are getting below error message" Fiscal year variant V3 not defined or maintained for date 01.01.2011 Message no. GMMASTERDATA108 if we change asset value date 02.01.2011, there is no error message. we are getting err

  • Is it possible to Start a SFC in multiple resouces?

    Dears, Is it possible to Start a SFC in multiple resouces? ex: SFC01 qty=100 Start SFC01 in below resources at the same time, Resource01 qty=10 Resource02 qty=20 Resource03 qty=70 so that user can calcute the resource utilization. Thanks!

  • SunMC Agent 3.6.1 and ZFS

    Hello, I was wondering if a SunMC agent is able to recognize a ZFS filesystem? I've tried it on one of our test servers there is no category under Kernel Reader-Filesystem Usage for ZFS...only ufs and vxfs

  • Javascript in HTMLDB 1.6

    Regarding http://www.oracle.com/technology/products/database/htmldb/howtos/htmldb_javascript_howto2.html Does HTMLDB 1.6 do any of the things used as examples in that HOWTO out-of-the-box or do we still need to use Javascript? For example, changing v