TS3147 Cannot print on network with canon LBP 7660 . Mavericks 10.9.2

Hello since Mavericks Upgrade, no IP print capabilities with Canon LBP 7660 cdn.
Every thing work fine before.
Re installing and upgrading with last drivers on Canon Site change nothing. Re-initialize print system several times...
Nothing works.
It seems the Printer is seeing busy by the mac.
PC on Vista do the job
Apple remains me the the earliest Windows....
What can I do to made the printer work properly ??

It sounds like you created the printer using the wrong protocol. When adding an IP printer on the Mac, IPP is the default protocol set, however this protocol is not compatible with the Canon UFR2 driver. So remove the printer from Printers & Scanners and add again, this time ensure you select either Line Printer Daemon-LPD or HP Jetdirect-Socket for the protocol.

Similar Messages

  • Macbook Pro 2011 not printing on network with canon pixma iP4500

    Hi
    I am not able to print satisfactorily from my 15" MacBook Pro 2011 to my QNAP TS439 server that has my Pixma iP4500 installed.  I contacted apple support and after 45 minutes the operative gave up and said it was a QNAP problem.  I am fairly sure it is not, so please read on...
    Here is what happens.  I ( myself and Apple) select the correct printer from the menu on my MacBook Pro with the correct path and printer on the server using Snow Leopard 10.6.8.  As soon as I go to print something  it says it is waiting for 10 seconds, very quickly it gets extended out past 30 seconds, but never prints.
    I have tried another driver called the Canon Pixma iP4500 Gutenprint v 5.2.3.  This  will only print in black text.  If I try to print colours, I get a very wishy washy pastel effect that just about shows that there might be some colours there.  This is hopeless and most unsatisfactory.
    In my opinion, this points the finger at Canon's printer driver that has been supplied to Apple, because the printer driver for Windows 7 works perfectly from the Windows 7 x64 PC.
    Does anyone have a solution to this?

    Just a quick reply for others in case it helps....
    First you have to install the Canon drivers for Yosemite from Canon Printer Drivers v3.1 for OS X.
    Then since I had reset my Canon MP620 network settings, I had to start from scratch. I connected the printer to my new computer (with Yosemite) via USB and then launched the Canon IJ Network Tool.app (downloaded from the Canon web site) and it found the printer. However it hung on the last step "Searching for printers via access point...". At that point (after waiting a minute for it to give up), I had to read the IP from the Canon printer and enter it by hand in the Network Tool dialog.
    I then unplugged the USB cable, and went to the Printers and Scanners system preference panel. After a few minutes, the printer showed up and I was able to set it up.
    I then tried to set up the printer on a 2nd computer, running Mavericks. The Canon printer would not show up in the Printers and Scanners system preference panel, but after I launched Canon IJ Network Tool.app on that computer, the printer did show up and I could set it up there as well. This is all much more convenient than using a USB cable and sharing the printer, but, dang, is it complicated!

  • Cannot print via network to Canon imagerunner color 2620

    I've installed the drivers/softwre, added the printer.
    But when I try to print:
    1) Print job starts
    2) Print job shows completed
    3) Nothing comes out of the printer!
    (print job is done via ethernet/wireless network)
    Please help
    Printer model: Canon ImageRunner Color 2620 (in the US), aka iRC2600N (in China)

    Hi William,
    Thanks for the reply. Okay, let's assume it is a Canon board. Therefore I recommend you perform the following steps.
    1. Ensure you are using the Canon PS Driver v1.60. This was the first version of a Universal driver to include support for Intel Mac's. You can download it from the Canon Australia web site (http://www.canon.com.au/products/business/multifunctionals/multifunctionaldigital_devices/iRC2620drivers.aspx).
    2. Open the Printer Setup Utility and click on the title menu. Click on Reset Printing System. This will delete the Canon driver from your system. To be sure, open Library > Printers > Canon. The driver resides in a folder called PS. If you see it, delete it and empty the trash. Then restart the Mac.
    3. Once the Mac has restarted you can run the installer for the v1.60 driver. You will have to reboot again once the installation is complete. With the Mac back on, open the Printer Setup Utility. Click Add and then click More Printers. Select 'Canon IP (PS)' and then enter the IP address of the iR C2620 and a queue name of LP. Click Add. The driver queries the printer, selects the appropriate ppd and configures the cassette and finisher setup.
    4. With the printer now residing in the printer list, open TextEdit and write a few lines of text. Click File > Page Setup and ensure that A4 is selected. Then select Print and click Copies & Pages. Select Special Features from the menu. You will see an image of the copier and the Job Accounting tab. Because the driver queries the printer, if Job Accounting is enabled, the driver will reflect this. So you will have to select the Job Accounting tab and enter a valid ID and password. Now make sure this ID has enough prints remaining. If you are using an ID that doesn't have any remaining prints, the job will be deleted once it arrives at the copier. The other things to watch out for is the value for colour and b&w. With the cost of colour printing, some admins set the colour value quite low (or zero) meaning that if your document does have any colour it will be deleted by the copier once the colour print limit is reached.
    5. With the ID and password set ( if needed) print the document. If it prints then open a different application and see if you can print from it. If it doesn't print, then please post back here the last 10 entries from the cups error log. This can be found via the Console application or the System Profiler.
    Paul

  • Cannot print PDF file with version 11.0.10 Adobe Reader.

    Cannot print PDF file with version 11.0.10 Adobe Reader.  Get error messages "This document could not be printed" and "There are no pages selected to print".  I am using a Mac OS Ver 10.0.2.  I see that this question has been asked by others recently, but no answers.  Anyone have any suggestions?

    Assuming you are running 10.10.2 and not the ancient 10.0.2, can you tell us what printer and printer driver you are using? How is the printer connected to the computer (network, usb)? See if you can delete the Reader preference files? Years ago I resetting the printer subsystem would sometimes cure a problem like this.

  • Having problems with canon lbp 7018c on osx yosemite. Is there an updated driver for it?

    having problems with canon lbp 7018c on osx yosemite. Is there an updated driver for it?

    Hi jaleesf,
    this video helped me. Printer/Scanner Fix With Yosemite No Matter What Brand
    -crazy

  • HP Color Laserjet 1600 cannot print in color with Pages 09

    Hi, everybody!
    I got a huge problem for me that the HP Color Laserjet 1600 cannot print in color with Pages 09 after I upgrade to 10.6.1. It worked very well in 10.5.8. Since there is no official driver from HP website for 1600, so I used foomatic/foo2hp as the driver.
    It is very strange that I can print in color with Safari and Preview in 10.6.1, but cannot with Pages 09. When I print with Pages 09, it always shows that the print job was completed but my printer was nothing happened.
    I just re-install the 10.6 OS "complete new", install the printer driver with the instructions on this forum.
    It would be high appreciated if somebody can help me on it!

    Why doesn't MAC just give us the driver for the HP Color Laserjet 1600? It's one of the most popular home based business laserjets. It's the one I use and a lot of other people in business use it so I'm at a loss as to why they don't.
    I bought my MAC Pro tower for video editing and I can't print from it and have had to reinstall the OS on it once already because Safari wouldn't open a window. So much for the MAc advertising statement of "We're so much easier to use."
    After spending close to $10,000 on MAC equipment, Tower, Laptop, Monitor, etc. if they think I'm going to spend more for a new printer just because I can't get a driver to print they're thinking wrong. I going to re-think my new cell phone purchase too. Has anyone had software issuses with their phones before I go out and buy one?

  • Printing issue on a Canon LBP 1000 connected to a PC running XP

    Cannot print on a Canon LBP-1000 connected (LPT 1) to a windows XP computer.
    I have managed to locate the printer on the workgroup but it is only printing blank pages or strange data such as
    %!PS-Adobe-3.0
    %RBINumCopies:1
    %%Pages: (atend)
    %APLDSCEncoding: TUF8
    %%Title:
    Any hint on how to resolve most welcomed!

    http://discussions.apple.com/thread.jspa?messageID=11991012
    http://discussions.apple.com/thread.jspa?messageID=12024908
    http://discussions.apple.com/thread.jspa?messageID=11995909
    Looks like you'll have difficulty getting a networkable driver - use this technique:
    http://iharder.sourceforge.net/current/macosx/winmacprinter/
    (sorry, it's written for XP not Win 7)

  • Cannot print or scan with USB printer over wifi from airport express / time capsule wifi

    Hi everybody,
    I have recently set up time capsule connected to the router from the telephone company but created a new wifi network for the time machine to better work. Now I have bought an airport express to be able to use my USB printer over the WIFI network. I have to laptops, the printing works fine over the mac book air but not over the macbook pro. On top of that I cannot scan with either of the devices.
    I have scanned most of the information out there but this issue seems not to be addressed properly anywhere. Advices given do always repeat itself but no solution worked for me.
    Now I have plugged the usb from the printer directly back into mac book pro and the problem seems to persist here too. The message I receive everywhere is this one:
    The software for the printer was installed incorrectly.
    Would you like it to be repaired?
    When I hit the Repair button a notice says 'repairing permissions' but nothing really happens. In the end nothing has been printed.
    Resetting the printing systems has not really changed anything either. The problems persist.
    This is the screen I get when the printer is directly plugged in through USB:
    Result: printer recognised and installed, I cannot print (The software for the printer was installed incorrectly), but I can scan (probably because of the hint ('multifunction')
    When I try to install the printer through the network connection (wifi network over time capsule and airport express) I get this image:
    Result: printer recognised over bonjour but without multifunction (in other words without scanning), I cannot scan nor print (The software for the printer was installed incorrectly)
    As I already mentioned any solution I found online would not work. Now the qustions are:
    1) why can't I print? The drivers seem to be there but somehow broken, and I don't know how to repair it
    2) why can't I scan over wifi? It sould possible that any function that can be performed over cable should also be able to performable over air, right?
    I would very much appreciate any kind of help.
    Thank you in advance,
    Cris

    What's up doc?
    HP has not provided "network" drivers to allow advanced features when the the All-in-One is connected to the USB port on the Time Capsule.
    Therefore, only the printing function is supported when the All-in-One is connected to the Time Capsule's USB port.
    If you need advanced features like fax, copy, scan, maintenance etc., you will need to connect over the WiFI network, or connect the All-in-One directly to your computer.

  • Cannot print PDF's with Kyocera

    I am using a Kyocera 5050 in my office installed as a network printer that utilizes local authorization codes for each employee in order to track printing usage. Normally, a print job will be sent to the printer and a box will pop up asking for credentials (the username and password for the printer). The printer will authorize the print job and then print it. I have one employee which cannot print PDF's from Acrobat. I tried updating the printer driver, Acrobat is up to date, and he has no trouble printing from any other application. Tried installing Adobe Acrobat Reader in order to see if it was just Acrobat, and Reader will not allow printing either. The computer will send the print job to the printer, but the printer rejects the credentials and will not print the job. No other employee has issues so it isn't a network issue, and his credentials work in any other software outside of Adobe products so I'm assuming that the issue lies within Adobe's software. Any ideas?

    I we understand your posting, only one user out of a group of users printing to a particular printer requiring credential presentation is having problems printing from Acrobat. How do you conclude that “the issue lies within Adobe's software” given that the other users don't have this problem?
    The particular printer, the Kyocera 5050, supports a number of page description languages, including their own emulations of PostScript and PCL. What page description language is being used? Are all the users setup with the same driver using the same page description language and the exact same driver settings?
    Acrobat and Reader generate their own PostScript, bypassing the driver for that function. Drivers that attempt to put up their own dialogs (such as requesting credentials) and then try to insert commands into the PostScript stream must do so very carefully per conventions established by Microsoft and Adobe. If such commands (such as a pre-job authentication stream) are not properly inserted, then they might be put into the job in the wrong place or go missing altogether.
    I would recommend checking the driver for the user experiencing the problems, making sure it is the exact same version and having all the same settings as those for users not having problems.
                        - Dov

  • Cannot print via network / HP 8000DN Printer

    I have been racking my mind and searching support forums all over the web. I cannot print via my HP Laserjet 8000DN. I print over the network and do not have any way to connect it directly to my iMac. Everything worked fine with Tiger and when I did the upgrade I didn't think it was a big deal thinking I should have done a clean install anyways. After a clean install I had the same problem. Under the supported printer page for 10.5 it lists my printer however I cannot get it to install under the 2 listed drivers and also with the older drivers downloaded from HP. Please help. I print often and am just about to give up on 10.5 until 10.5.1 comes out. It's a $4000 printer and I am not going to buy a new one based on a driver issue.
    Thanks in advance to all that help!!

    user error at the time...

  • Problem printing thru network with new 8500A all-in-one

    I installed a new Officejet pro 8500a plus on my network.  I have 3 computers on the network set up this way:  DSL modum connected to Linksys router, all 3 computers connected to the router, PRINTER is connected to main COMPUTER and other 2 computers print through the main computer.
    I installed the printer sucessfully and ran the HP network wizard following the dialogs for connecting through another computer.  I can print, and fax fine from the main computer but not from the other computers.  I configured the printer as "shared" on the main computer and the other computers recognize the printer and set it as the default printer.  But when I try to print form the other computers nothing happens.  When I go into control panel - printers - properties - ports on the main computer, the printer is listed as USB002 but when I click on "configure" I get "An error occured during port configuration.  This opperation is not supported".
    Main computer is running Windows Vista with current updates
    Other computers are running Windows XP SP2 with current updates.
    Any ideas?
    Thanks, Jim
    This question was solved.
    View Solution.

    Why are you using Windows print sharing with your nice network printer? This mode only supports printing, not scannning or faxing. The better way to do this is to attach the printer to your router with Ethernet or wirelessly so that all PCs (regardless of how they connect) can use all of it's features. Disconnect the USB cable and run the Wireless Setup Wizard (if you want to connect it wirelessly, otherwise, plug the Ethernet cable in to the printer and router) from the front of the printer (Setup >Network menu), then run the HP software to "Add a Device" on each PC.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Cannot print using RDP, with a custom page size ,on HP Laserjet M1217nfw MFP

    Dear Team,
    i have on the server win 2008 R2 standard , i have installed the drivers of HP Laserjet M1217nfw MFP printer , 
    on the client i have win pro 7 SP1.
    i need to print through RDP the documents generated in my application which i access remotely using RDP.
    i know the printer drivers are installed on client and server both.
    the issue is of creation of custom pages to print the document in proper format so that it prints in the client PC with proper formatting.
    we are currently successfully printing on HP Laserjet P3015 printer but at a different location. and i have 5 branches still to be able to print this document from the application,
    I need you advise and assistance as to how do i go about achieving my objective with this printer,
    Thanking you in advance
    regards
    Vibes

    Hello JBC666,
    I understand that you are having an issue with printing wireless from your M1217nfw. I can understand how frustrating this can be. I would like to confirm a couple of things with you to get better understanding of your setup.
    1) How far away from the printer is the router?
    2) Has there been an recent changes that could have caused the issue?
    As well printing a network test report, is an excellent option to find out if there is any issues with the connection at all. I have included the following steps to print the test.
    1) Press the wrench button
    2) Press the right arrow until you see Network Config
    3) Press Ok
    4) Press the right arrow until you see Network Test
    5) Press Ok
    1) Does anything fail on this test?
    2) What is the signal quality?
    3) Are you able to view the printers embedded web server?
        Steps to accessing the embedded web server
        1) Open up your internet browser
        2) Type the IP address (from the test report) into the address bar
        3) Press Enter
    Thank you.
    I worked on behalf of HP

  • Cannot print to pdf with Acrobat 8

    I have just gotten a new laptop and moved my CS2 over to it. Everything works fine except I cannot print to a pdf like I used to. I can save as a pdf, but when I print to Adobe pdf, the printer icon pops up in the system tray. When I click on it, the window displays the print job with status: Error-sent to printer. It's the same thing when I try to print a web page or a Word document to a pdf.
    By the way, this version of CS2 came with Macromedia Dreamweaver 8 and Adobe Acrobat Professional 8 on seperate disks from the CS2 installation disks. Thanks in advance for the help.

    And by the way, I did look at my startup folder. The following items are checked:
    Adobe Acrobat Speed Launcher
    Adobe Acrobat Sychronizer
    Adobe Systems, Inc. Gamma Loader
    AcroTray - Adobe Acrobat Distiller helper application

  • Why I cannot print a PDF with markups?

    We use Acrobat Standard 7.0.8 and cannot print a PDF document form with markups. We found a "quick fix" to print it, which was to select in the print dialogue to print Document and Markups.
    Question:
    Because we've sent the form to our clients, they several have reported this about the form. Do you know why this would happen? Is it that they are using a different version of Adobe? Or what is the problem?
    Joe

    That's the way the application works. If you think the default should be to print the markups send a feature request to Adobe, but I doubt it will happen. You just need to explain to your clients how to do it. It's quite simple.

  • I cannot print PDF's with XI on Windows7/ Dell XP and a Dell A940 Printer. Why ?I use to be able.

    I use to be able to print PDF's on an older version of Acrobat.Since I uploaded to XI , I cannot print from Adobe but I can print from Word and others .I have tried removing XI and going back to an older version with the same result. I get a prompt that states "This application has failed to start because DLBAGF.DLL was not found.Re-installing this application may fix this problem. And another -"AcroRd32.exe-unable to locate componet" and finally "Can not load library DLBAPRP.DLL using defaults,error 126.Any one else in my boat?

    Have you seen the suggestions in the article at:
    http://support.microsoft.com/kb/918730

Maybe you are looking for