TS3274 My IPad is dead. Nothing will show on the screen. Screen not cracked and no water or liquid has been spilled on it. Is there a battery that needs to be replaced?

My IPad is dead. Nothing will show on the screen. Screen not cracked and no liquid spilled on it. Is there a battery that needs to be replaced?

Battery not charging:
1. Reset iPad; hold the Sleep/Wake and Home button down until you see the Apple Logo
2. Try another wall socket
3. Try another cable (make sure it's an original Apple cable)
4. Try another charger (make sure it's an original Apple charger)
5. Clean Lightning port with compress air or new paint brush

Similar Messages

  • TS3274 my Ipad is on, Siri will answer but the screen is completely blank..help!

    I was powering down my ipad and suddenly the screen went completely black.  I can power up and get Siri to respond but the screen remains black.  I've tried syncing with Itunes but so far no luck.  Any ideas how to fix this?  One minute it was fine and then poof!

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • My phone will not turn on...it is charged and nothing will show on the screen.

    My phone will not show anything on the screen and I know it is charged.  Even when it is plugged in it will not show anything.  What do I do?

    Yours is the 4th message I have seen today with this question, so you probably posted without reading recent messages. Anyway, hold the HOME and SLEEP buttons at the same time until an Apple logo appears, usually about 10 seconds. This reboots the phone (or restarts the phone if you are a Mac user). You will not lose any data.

  • Ipod is synced but not all music will play. The music shows on the Ipod but not highlighted and cannot click to play.

    Ipod is synced but not all music will play. The music shows on the Ipod but not highlighted and cannot click to play.

    Provided the music plays in iTunes on the computer
    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • When I click on "Sign in to Sync" the page "about:accounts" shows error "The URL is not valid and cannot be loaded." How do I fix this so I can use Sync?

    When I click on the three-bar icon (top right) and then on "Sign in to Sync" a new tab opens attempting to load "about:accounts" . . . the page that loads is an error . . . "Problem loading page" shows up on the tab and the page displays:
    The address isn't valid
    The URL is not valid and cannot be loaded.
    Web addresses are usually written like http://www.example.com/
    Make sure that you're using forward slashes (i.e. /).
    Try again
    I am running Firefox 30.0 on a Dell XPS-18 and Windows 8.0.
    I cannot access "about:accounts" at all. How do I fix this?

    The about:accounts page is a valid page in the current Firefox release.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • My iMac is connected to a router, internet says it is connected, when I open safari, it will go to the website, but nothing will show in the window

    My iMac is directly connected to the router, the internet says it is connected, but when I open Safari and go to any webpage - it will show that it is open, but I get a blank screen

    - First try resetting the iPod.  Nothing will belost:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next reset network setting: Settings>Genera>Reset>Reset Network Settings

  • When my iphone 5s was doing an update my laptop died. Now it wont turn on it only will show me the screen to connect to iTunes but iTunes doesn't recognize that I have my phone plugged in. I cant access anything on my phone it just says connect to iTunes.

    I have tried turning my phone, and laptop off, I also uninstalled and re-installed iTunes.

    Hello errod2014,
    It sounds like you are unable to see your phone in iTunes after the computer turned off unexpectedly during an iOS update. I recommend resetting the phone first, and then attempting to restore with iTunes again.
    To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    From: Turn your iOS device off and on (restart) and reset
              http://support.apple.com/kb/ht1430
    If you are still unable to see your phone in iTunes,  follow these steps for Mac or these for Windows.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • After restar with boot camp to get back to windows 7...mac just wont show image,the screen is black,and its turn on?...any help?

    ....?

    Reboot, as soon as you hear the chime press and hold the option key. When the startup manager appears choose OSX.
    Then go to System Preferences>Startup Disk and select the default of your choice.

  • I have a HP 2000. The screen is cracked and want to replace it. Where can I buy another?

    WANT TO PURCHASE A NEW SCREEN FOR MY NOTBOOK.   WHO DO I CONTACT!

    Hi cpmpu- man ,
    Best bet is to contact The  HP partstore team with teh prosuct or the serial number of the unit - theyw ill give you the part number & you can place an order through them .
    If your not aware of the part number you can contact >Partstore Phone number - 
    North American HP Parts Store
     800-227-8164       Opt 3 Opt 1
    or if your aware of teh Part number Yourself you can place an order at HP Partstore online 
    just google it or find it at  http://partsurfer.hp.com/Search.aspx?searchText=q5​927a
    Regards,
    PraTH_KR
    Although I am an HP employee, I am speaking for myself and not for HP.
    **Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

  • I dropped my iPad on my MacBook Pro and it put a little dent on top of the aluminum cover. When I opened it the screen was cracked in that location. Plz help.

    I dropped my iPad on top of my MacBook. The screen is cracked and would like to know how to fix it. Plz help

    Csound1, free speech should have a place in this forum. Bless, you have 13,000+ points one day they might make you a moderator and give you a little badge. Isn't it ironic that Apple and their fanboys have became "Big Brother"?
    As the old cliche goes ,"There's no harm in trying". If you can't afford a bill for several hundred bucks, then I would welcome all honest feedback and evaluate my options before paying a large repair bill.
    If you don't agree with it don't use it.
    There have been many stories of people getting free replacements, a close friend has received four replacement iPhones after the screen cracked from dropping it.
    Screens crack due to a variant of reasons, humidity/climate change. If someone punched it and broke it deliberately then of course it shouldn't be replaced but it should be able to withstand some drops/pressure on top.
    It may not be under warranty but you will find people who got a nice genius to replace it anyway.

  • My ipad will not start.  It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

    My ipad will not start.  It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore.Nothing will load unter the features or charts tab. Any Suggestions?

    I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore. Nothing will load unter the features or charts tab so i cant download any apps. Purchased and updates tab loads fine. Any suggestions?

    You would get better response from the iTunes community forum.
    Have a nice day!

  • After upgrading to IOS 5 on my iPad only some books in iBooks show content. They were fine before the upgrade. I made a new version in Pages and reinstalled them on the iPad. Still nothing. What is the fix?

    After upgrading to IOS 5 on my iPad only some books in iBooks show content. They were fine before the upgrade. I made a new version of the book in Pages and reinstalled them on the iPad. Still nothing. What is the fix?

    I just got the iBooks update and that fixed the problem, except the book covers look like they were done in a government printing office.

  • Forgot the passcode to my ipad. When I went to restore it, it asked me if I wanted to update the software so I said yes. It then went into recovery mode, I'm guessing, with the connect to iTunes showing on the screen. Now iTunes will not recognize it??

    Forgot the passcode to my ipad. When I went to restore it, it asked me if I wanted to update the software so I said yes. It then went into recovery mode, I'm guessing, with the connect to iTunes showing on the screen. Now iTunes will not recognize it so I have no idea how to get it back! Help!!

    Then you will need to try restoring it once more:
    Placing your device into recovery (DFU) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • My ipad mini is keep on crashing. reboot many times. after the apple logo shows up, the screen will turn into black again.

    my ipad mini is keep on crashing. reboot many times. after the apple logo shows up, the screen will turn into black again.

    Try the following:
    1. Reset
    Hold the Sleep and Home button down until you see the Apple logo
    2. Restore:
    http://support.apple.com/kb/HT1414
    3. Recovery:
    http://support.apple.com/kb/HT1808

Maybe you are looking for

  • High Availability Test Cases for ECC6.0, PI 7.0, BI 7.0???

    Dear All I am in a pretty difficult situation here. I have to write test cases for the components in the High Availability environment. We are running AIX 5L with HACMP/XD clusters ACTIVE/PASSIVE setting. The following components are in the landscape

  • Exception in global forwards in strut-config.xml

    Hi friends, i am doing a global forward and i am getting the following exception. without global forward in strut-config.xml it works fine.exception javax.servlet.ServletException: Cannot find global ActionForward for name welcome      org.apache.jas

  • Html page in a JEditorPane

    Hello! I would like in a JEditorPane an html page show. This page contains a table with 2 columns. The following code contains my program: JEditorPane editPane = new JEditorPane(); editPane.setContentType ( "text / html"); editPane.setPage ( "url");I

  • How to delete General Text version

    Hi experts, I created a general text, and there are three version for it, two raw version 001 and 003, one active version 002. now i want to delete active version 002 and raw version 003. in my requirement, i can not delete the general text, then cre

  • Slides in slideshow are fuzzy

    When I view my slides in Organizer, they are sharp. When I assemble the same slides into a slideshow, the images are fuzzy and indistinct. What am I doing wrong?