TS3276 unable to send mail via charter. Have desk and lap top.
Have Charter as ISP. Have Apple desktop and Mac Book Pro and iPhone. Can receive messages on all devices but can only send on desk top (primary household computer) and iPhone. Have checked Apple site and have gotten no resolutuion by talking to Charter support. Can anyone help?
An Update of sorts.
On my E72 I removed all references to Verisign under: Ctrl. panel -> Settings -> General -> Security -> Certificate management -> Authority certificates. (There were about 6 entries)
I tried to connect afresh, but the phone took two attempts to pick up my password for email.
I now have a 'Trusted site certificate' for the email server.
However, I still can't send. A message pops up 'Unable to send message: <target address>'
Similar Messages
-
I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights. This started after I disabled ICloud. I had to disable ICloud as I was not receiving all my mail.
I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights. This started after I disabled ICloud. I had to disable ICloud as I was not receiving all my mail.
-
Unable to send mail via Secure SMTP
Our email system allows users access to their accounts via secure IMAP and SMTP.
I am able to connect and view my inbox via secure IMAP, using a number of different S60 devices - namely E72, E52 and 5800.
However I am unable to connect to send via secure SMTP.
By contrast, I am able to view and send mail with Apple and Android devices without any problems.
On my comparable UAT configuration the S60 devices do not have this problem.
On UAT, we use a self-signed certificate, as opposed to the Live system which uses a Verisign certificate.
Help, please!
I'd like to be able to send mail with my S60 devices.
How can I resolve this apparent problem with the certificate?
EchoAn Update of sorts.
On my E72 I removed all references to Verisign under: Ctrl. panel -> Settings -> General -> Security -> Certificate management -> Authority certificates. (There were about 6 entries)
I tried to connect afresh, but the phone took two attempts to pick up my password for email.
I now have a 'Trusted site certificate' for the email server.
However, I still can't send. A message pops up 'Unable to send message: <target address>' -
TS3276 Unable to Send Mail OSX10.6.8
Hi,
Suddenly I'm unable to Send messages in Mail from any of my email addresses ...they just immediately go to the Outbox & sit there.
Have made no changes in Accounts Prefs settings prior to the issue.
Have double checked all info, passwords, etc.
Have since tried all sorts of changes, including AT&T's automated email setup app, live Chat via AT&T support...things have actually gotten worse, now I also don't Receive messages either.
No issues with Web...can access via Web mail & iPhone, but not home computer.
Driving me nutz...!
Any & all help is greatly appreciated.
Best Regards, SS
Mac Mini mid-2010
OSX 10.6.8
Mac Mail 4.6
AT&T U-Verse lower southeastern MIdalefromchugiak wrote:
Well, it seems to be working correctly now -- but I'm still a bit nervous.
I have no idea what exactly fixed it.
Thinking it might be a wireless issue I connected the MBP via ethernet and mail sent quickly. Switched back to wireless and it has continued to work as it should with the wifes account. At first my user account on the MBP was not sending mail but now it too is working.
I give up.
Thanks for the replies
Strange indeed. It will be interesting to see, if it happens again, if connecting ethernet will resolve it again. I wonder if doing that reset a preference or cache. -
Unable to send mail via .Mac
Love my new iPhone. Everything seems to work just fine. I can't, however, send mail using my .Mac account (I receive mail just fine). When I attempt to send (using Edge), I get an error, "Cannot send Mail - the connection to the outgoing server 'smtp.mac.com' failed." One would guess that I've got some setting incorrect, but I can't see what it is. My Yahoo and GMail accounts seem to work just fine, both sending and receiving mail. It's just the .Mac account. Any suggestions? I suppose I could delete the account and try again, but there must be something not right. Any Ideas???
DukeMDid you manually create your .Mac account on the iPhone or transfer your .Mac account settings from your Mac to the iPhone via the sync process?
If the latter, what are you using for the server port for .Mac's SMTP server on your Mac?
If not 25, change it to 587.
If you manually created your .Mac account on the iPhone, use this for the SMTP server.
smtp.mac.com:587
Add 587 to the SMTP server separated by a colon.
I use this to send with my .Mac account on different WiFi networks and via EDGE with no problems. -
I run connection doctor it says green light but then says server error
Hello-
I have the same problem since upgrading to Mountain Lion from Snow Leopard last weekend.
This seems to be a common problem in 10.8 and a glitch in Mail 6.6 according to my ISP;
under advanced in the SMPT settings, Use of SSL cannot be unchecked causing the mail not to send.
I Googled the problem and found that checking Use Custom Port and setting it to 25 solved the problem for others. It worked for me too but when I close Mail, it resets the custom port to 587 and the mail will not send until I manually change the custom port back to 25. Mail 6.6 does't like port 587.
It's my hope Apple will resolve this issue in a future update but until, I am using Thunderbird mail (free from Mozilla). It works fine and uses port 587 btw.
Other thoughts welcomed!
Best,
John -
Unable to Send mail in Korea, Traditional Chinese and Thai
Hi,
I have just started using CF 8.
I have trying to send email using CFMAIL. The content of the
email consist either Korea or Traditional Chinese or Thai
characters. But the characters are not displaying in the email.
I actually retreive the data from database and display on the
website. It is displaying properly with the charset the I used. But
only in email, it can't display properly.
Pls help!
Thank you.munmun77 wrote:
> I actually retreive the data from database and display
on the website. It is
> displaying properly with the charset the I used. But
only in email, it can't
> display properly.
first off what does "can't display properly" mean?
i just tried something like your code w/unicode (utf-8) &
it worked fine. a few
things:
with such different languages i'm kind of surprised you're
not using unicode for
your app's encoding, save lots of headaches.
as a matter of good practice you should always include
<cfprocessingdirective pageencoding="big5">
> <html>
> <head>
> <title>Untitled</title>
> </head>
> <meta http-equiv="Content-Type" content="text/html;
charset=big5">
shouldn't this be in the header tags?
> <body>
> <cfheader
> charset="big5"
> name = "content-type"
> value = "text/html;">
>
> <CFQUERY name="GetScreen_Login"
dataSource="VOCTEST">
> SELECT *
> FROM VC_SCREEN_STR
> WHERE STR_no = 2
> </CFQUERY>
>
> <cfoutput>
> #GetScreen_Login.STR_FXTW#
> </cfoutput>
>
> <CFMAIL TO="[email protected]"
> FROM="[email protected]"
> SUBJECT="Test Email"
> charset="big5"
> TYPE="HTML">
>
> <cfmailpart type="html" charset="big5">
> <html>
> <head>
> <title>EMAIL</title>
> </head>
> <body>
> <meta http-equiv="content-type" content="text/html;
charset=big5">
shouldn't this be in the header tags?
>
> <cfheader
> charset="big5"
> name = "content-type"
> value = "text/html;">
not sure where cf would stuff this? email or the current
page? i would maybe
just stick w/the plain HTML meta-header for the email.
> <cfoutput>
> #GetScreen_Login.STR_FXTW#
> </cfoutput>
> </body>
> </html>
> </cfmailpart>
> </cfmail>
>
> <CFHEADER NAME="Expires" VALUE="#Now()#">
not exactly sure the effect of *not* adding charset to this
tag but probably a
good idea....
does plain email work? can you send me an example email? -
I have a problem sending mail via smtp. I use a satellite system and the average return time for a ping is 675ms. Is this a problem with mail? If so can I change Mail to accept it. The problem also exists with Lion and on both my MacPro and my wife's Imac. I also see my mailboxes randomly disconnecting and reconnecting. Any other ideas of a possible cause?
I solved it myself, after the "note" which came back from FF/Mozilla just as I finished my message, commenting on what it was that my system had , I wnnt back to check my plug-ins etc. I downloaded the latest Java, BOTH 32bit AND 64 bit versions and latest Firefox.
Now all is working.
Thanks,
B. -
When a external application tries to send an email via Thunderbird i get an error message, roughly translated it says: "Something went wrong with PostMail, error number 2"
My collegues have the same setup, they have no problem what so ever when sending mail via this way. Any tips would be most welcome. Thanks for your time.Continue at your other thread.
https://support.mozilla.org/en-US/questions/1053959 -
I am unable to send mail from my Orange.fr account on my ipad add
Orange.fr lost personal data on Sunday, so I decided to change the password on my mail account which I did successfully can pick up and send mail via Thunderbird on my PC. However, I had to delete my orange account from the mail application as it would let me change the password in settings. I can now receive mail OK, but I an unable to send as I get the message that "That the username or password for "SMPT (email address)@smtp.orange.fr" is incorrect. I have checked the server settings against those on Orange.fr website, and they are correct. Any ideas what the problem is?
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
Hi,
We have configured SMTP server details in OBIEE 11g OEM to send mail from Agent. When we run Agents, we are getting the error
[nQSError:75006] Unable to send MAIL Command.5.7.1 Client was not authenticated
Did anyone face the issue? In that Case, Please give some inputs on that.Hi Satya,
I would like to few more which I have done today.
I wanted to test telnet SMTP on the OBIEE Installed Machine and I was able to succeed also. Please find below what I did
C:\>telnet mail.smtp.com 25
220 internal.mail.smtp.com Microsoft ESMTP MAIL Service Readt at Fri,
25 May 2012 00:51:00 -0400
ehlo
250-internal.mail.smtp.com Hello [162.44.76.47]
250-SIZE
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-X-ANONYMOUSTLS
250-AUTH NTLM LOGIN
250-X-EXPS GSSAPI NILM
250-8BITMIME
250-BINARYMIME
250-CHUNKING
250-XEXCH50
250 XRDST
AUTH LOGIN
334 VXN1cm5hbWU6
Uy5SY-------------- Mail User Name
334 UGFzc3dvcmWU6
U2hfpd------------- Mail Password
235 2.7.0 Authentication Successful
mail from:[email protected]
250 2.1.0 Sender OK
rcpt to:[email protected]
250 2.1.5 Recipient OK
data
354 start mail input; end with <CRLF>.<CRLF>
This is a Test Mail
250 2.6.0 <internal.mail.smtp.com>
Queue Mail for Delivery
Mail Received in Inbox
So, My Question is that, I am able to receive the Mail if I directly access SMTP via Telnet then , Why it is not working in OBIEE and it throws error
[nQSError:75006] Failed to send MAIL Command.5.7.1 Client was not authenticated
Please help on resolving the issue? -
Sending mail via Javascript.
It is possible to send mail via a Javascript. If so can anyone support me with the code to do so.
you use the Windro$$ scripting host, and use an ActiveXObject to access the Outlook (not express) poroperties.
I used to do them a lot because they save me time... all automated is always better.
For example, here is a script that changes the read-only, etyc file properties on a windro$$ box. (I used it when copying CDs)
/* Changes the file attributes in a batch of files starting in
* the current directory and progressing according to parameters
/* LOGIK:
-get the path to a file in folder
change attribute of file/dir.
repeat until there are no more files
go to next folder
start again
* VARIABLE PARAMETERS *
* includeSubDirectories {true | false} *
* Should the subdirectories' files be changed too? *
* numberOfLevelsDeep {0 | 1..99999999999} *
* The number of levels of subdirectories that should be *
* affected (0 = all) *
* onlyFilesWithExtension {"" | "extension" | ["extension", *
* "list"]} *
* Only the fies with this extension are to be changed *
* ("" = all, no regexp) (arrays can be used ["htm", "html", *
* "gif", "jpg", "jpeg"]) *
* NewAttributes: *
* readOnly {true | false} *
* Set files to read only? *
* hidden {true | false} *
* Set files to hidden? *
* archive {true | false} *
* Set files to archive? *
* system {true | false} *
* Set files to system files? *
var includeSubDirectories = true;
var numberOfLevelsDeep = 0;
var onlyFilesWithExtension = "";
var NewAttributes = {
readOnly : false,
hidden : false,
archive : false,
system : false
//MAIN FUNCTION
function main(){
chmod(path, 0, numberOfLevelsDeep, includeSubDirectories);
//OBJECTS
//FUNCTIONS
// This arguments are here just to pass information around during
// runtime
function chmod(dir, browseNumber, levels, subdirs){
//If the number of levels deep has been reached and
//the number of levels is not 0 then end
if(browseNumber > levels && levels != 0){
return;
}else{
browseNumber++;
//get directory as a folder object
dir = FSO.GetFolder(dir);
var FILES = new Enumerator(dir.files);
var DIRECTORIES = new Enumerator(dir.subFolders);
for(; !FILES.atEnd(); FILES.moveNext()){
try{
//Change file settings
var currentFile = FSO.getFile(FILES.item());
//if we have an extension array...
if(extensionIsArray){
for(var i in onlyFilesWithExtension){
if(onlyFilesWithExtension[i] == ""
|| FSO.getExtensionName(currentFile).toLowerCase(
) == onlyFilesWithExtension.toLowerCase()){
changeAttributes(currentFile);
break;
}else{
if(onlyFilesWithExtension == ""
|| FSO.getExtensionName(currentFile).toLowerCase(
) == onlyFilesWithExtension.toLowerCase()){
changeAttributes(currentFile);
}catch(error){
WSH.popup("Unable to change file '" + currentFile + "'\n" + error.description, 0);
for(; !DIRECTORIES.atEnd(); DIRECTORIES.moveNext()){
if(subdirs){
chmod(DIRECTORIES.item(), browseNumber, levels, subdirs);
changeAttributes(DIRECTORIES.item());
}else{
return;
function changeAttributes(filename){
var err = "pagefile.sys";
if(("" + filename).substring(("" + filename).length - err.length, ("" + filename).length).toLowerCase() == err){
return; // The file is the virtual memory buffer... ignore!
//Try to use the filename as if it was a file.
//If operation fails, then we have a folder.
//In either case the change of properties should work.
try{
filename = FSO.getFile(filename);
}catch(error){
filename = FSO.getFolder(filename);
//Change the file/folder attributes if necessary
for(var i = 0; i < 4; i++){
if(filename.attributes & modes[i]){
if(!newca[i]){
filename.attributes = filename.attributes - modes[i];
}else{
if(newca[i]){
filename.attributes = filename.attributes + modes[i];
//CONSTANTS
var FSO = new ActiveXObject("Scripting.FileSystemObject");
var WSH = new ActiveXObject("WScript.Shell");
//VARIABLE DECLARATIONS
//geth the location of the script
var path = FSO.getParentFolderName(WScript.scriptFullName);
//If this is an array, element 0 will not be undefined
var extensionIsArray = onlyFilesWithExtension[0] + "" != "undefined";
//Convert object to usable array
var newca = [NewAttributes.readOnly, NewAttributes.hidden, NewAttributes.archive, NewAttributes.system,];
//[readOnly, hidden, archive, system]
var modes = [1, 2, 32, 4];
//changeAttributes("c:\\autoexec.bat");
//Go!!!
main();
dave. -
Does anyone have any examples of sending e-mail through Lotus Notes via forms 6i?
I have searched the forum and there seems to be very few items on Lotus Notes.
Thanks in advance.
LakmalFainaly I found the way.. here is the coding
PROCEDURE send_email(p_recipient_in IN VARCHAR2,
p_copy_to_in IN VARCHAR2,
p_blind_copy_to_in IN VARCHAR2,
p_subject_in IN VARCHAR2,
p_text_in IN VARCHAR2,
p_return_receipt_in IN VARCHAR2,
p_no_of_attachments IN NUMBER DEFAULT 0,
p_mood_stamp_in IN VARCHAR2,
p_view_icon_in IN NUMBER) IS
-- Local Variable Declaration
lv_args ole2.list_type;
lv_db ole2.obj_type;
lv_doc ole2.obj_type;
lv_return_receipt VARCHAR2(1);
lv_session ole2.obj_type;
lv_attach1 ole2.obj_type;
lv_attach2 ole2.obj_type;
lv_mailserver VARCHAR2(200) := 'ew-cmb';
lv_sqlerrm VARCHAR2(255);
BEGIN
lv_session := ole2.Create_Obj('Notes.NotesSession');
lv_args := ole2.Create_Arglist;
ole2.Add_Arg(lv_args, lv_mailserver); -- Mail Server
ole2.Add_Arg(lv_args, 'names.nsf'); -- Mail File
ole2.Add_Arg(lv_args, 'mail\Lakmal_M.nsf'); Mail File
lv_db := ole2.Invoke_Obj(lv_session, 'GetDatabase', lv_args);
ole2.Destroy_Arglist(lv_args);
lv_doc := ole2.Invoke_Obj(lv_db, 'CreateDocument',lv_args);
ole2.Set_Property(lv_doc, 'SendTo', p_recipient_in);
If (p_copy_to_in IS NOT NULL) then
ole2.Set_Property(lv_doc, 'CopyTo', p_copy_to_in);
End If;
If (p_blind_copy_to_in IS NOT NULL) then
ole2.Set_Property(lv_doc, 'BlindCopyTo', p_blind_copy_to_in);
End If;
-- Guidelines for mood stamp as to what argument values should be passed
-- ''- Normal
-- P - Personal
-- C - Confidential
-- R - Private
-- F - Flame
-- Q - Question
-- G - Good Job!
-- M - Reminder
-- J - Joke
-- T - Thank You!
If (p_mood_stamp_in IS NOT NULL) then
ole2.Set_Property(lv_doc, 'SenderTag', p_mood_stamp_in);
End If;
If (p_subject_in IS NOT NULL) then
ole2.Set_Property(lv_doc, 'Subject', p_subject_in);
End If;
If (p_text_in IS NOT NULL) then
ole2.Set_Property(lv_doc, 'Body', p_text_in);
End IF;
--To embed attachments add the following lines to code immediately after
-- setting the 'Body' property :
If (nvl(p_no_of_attachments,0) = 0) then -- No attachments
null;
Else
lv_args := ole2.Create_Arglist;
ole2.Add_Arg(lv_args, 'Attachments');
lv_attach1 := ole2.Invoke_Obj(lv_doc, 'CreateRichTextItem', lv_args);
ole2.Destroy_Arglist(lv_args);
lv_args := ole2.Create_Arglist;
ole2.Add_Arg(lv_args, 1454);
ole2.Add_Arg(lv_args, '');
Ole2.Add_Arg(lv_args, 'C:\Install.log');
lv_attach2 := ole2.Invoke_Obj(lv_attach1,'EMBEDOBJECT', lv_args);
End If;
-- 1-Return Receipt
-- 0-No Return Receipt
lv_return_receipt := TRANSLATE(NVL(UPPER(p_return_receipt_in), 'N'), ' NY', '001');
ole2.Set_Property(lv_doc, 'ReturnReceipt', lv_return_receipt);
If (lv_return_receipt = '1') then
ole2.Set_Property(lv_doc, 'DeliveryReport', 'B');
End If;
-- The following values can be used to set the icon that appears to the left
-- of the senders name.
-- 0 - none
-- 10 - finger with ribbon
-- 23 - newspaper
-- 74 - flame
-- 83 - thumbs up
-- 85 - happy face
-- 133 - envelope
-- 159 - star
-- 162 - question mark
-- 163 - investigator
-- 166 - glasses
-- 169 - red circle
-- 170 - gold circle
If (p_view_icon_in IS NOT NULL) then
ole2.Set_Property(lv_doc, '_ViewIcon', p_view_icon_in);
End If;
ole2.Destroy_Arglist(lv_args);
lv_args := ole2.Create_Arglist;
ole2.Add_Arg(lv_args, 0);
ole2.Invoke(lv_doc, 'Send', lv_args);
ole2.Destroy_Arglist(lv_args);
ole2.Release_Obj(lv_session);
ole2.Release_Obj(lv_db);
ole2.Release_Obj(lv_doc);
EXCEPTION
WHEN OTHERS THEN
lv_sqlerrm := substr(sqlerrm,1,255);
Message('Unable to send mail to ' || p_recipient_in);
Message('Unable to send mail to ' || p_recipient_in);
Message('Error is : '||lv_sqlerrm);
Message('Error is : '||lv_sqlerrm);
Set_Application_Property(CURSOR_STYLE, 'DEFAULT');
RAISE;
END; -
Unable to send Mail from POP account
I have an Iphone 4 and have upgraded the IOS from 5-1 to 6.1.3. Since then I have been receiving all my mails but i have been unable to send mails from my POP account. the notification "Cannot Send Mail. A copy has been placed in your Outbox. The receipient, "xxyyzz @ gmail . com " was rejected by the server" displayed. Please Help. the same thing happens when I configure my POP account on my Son's Iphone4, and there is no problem in receiving and sending mails from my Outlook. Please Help!!!!!
Can i revert back to IOS5.1.1?????Contact your email provider and get the correct settings to use for the outgoing mail server (SMTP) on a mobile device. If it's email provided by your ISP, they have likely blocked email from outside their network from relaying to prevent spam.
-
Unable to SEND mail using Activesync in Exchange 2010 server on iPhone or Windows Mobile 6.1
Hi All,
We've been setting up a new SBS 2011 server for a client this week. Everything is working, except the staff have 4 x iPhones to connect with Exchange ActiveSync.
There are 2 x iPhone 4's and 2 x iPhone 3Gs's. We can setup the Exchange accounts on each of the phones and they are all able to sync mail and calender etc with the server.
The problem we have is when any of them try to send mail from the phone, it gives an error : "Cannot Send Mail - An error occurred while delivering this message" and it sits in the outbox on the phone.
The newsgroups and forums are littered with people having issues with IOS4 and Exchange 2010 but most of these are from June-August 2010 when IOS4 version was around 4.00 or 4.01
A lot of these people had iPhone 3 handsets running with IOS 3.1.3 which worked with Exchange 2010 but when they upgraded to IOS 4, they had this problem sending mail.
It seems that for most of them, the fix came in the form of IOS version 4.1 which fixed the send issue for them.
We have a variety of Hansets and IOS versions (including an iPhone 3Gs running IOS 3.1.3) but are unable to send mail from any of them:
iPhone 3Gs IOS 3.1.3
iPhone 3Gs IOS 4.3.3
iPhone 4 IOS 4.3.3
iPhone 4 IOS 4.3.5
I was surprised that the iPhone 3Gs running 3.1.3 was unable to send either as nearly all the forums etc I read with this issue said the iPhone 3's worked with that IOS version.
Today we used a test iPhone 4 handset from our office to connect to an almost identical Small Business Server 2011 we setup two weeks ago for another client.
The test iPhone 4 was able to connect, Sync and Send email on that server but when set it to connect to this SBS 2011 server, it gets the "Cannot Send Mail" message the same as the others. So clearly the handset is working (on the other server at least),
it must be something misconfigured in this Exchange server right?
We ran the Exchange Remote Connectivity Analyser on the Exchange server and got green ticks across the board.
Outlook Web App and Outlook Anywhere both work normally. Everything we can test on the Exchange server works except sending from any iPhone.
Having said all that, I just setup a Windows Mobile 6.1 handset to sync with the Exchange 2010 server as a test, and it appears to have the same issue.
It will connect & Sync Mail, Contacts and Calendar but if trying to send an email from the phone, it will just sit in the outbox.
Does anyone have some insight into what the problem may be?Further to this .. I found the solution on a MS Exchange 2010 support forum.
It was not a certificate or firewall issue, looks as thought the “Accepted Domains” in Exchange Mgmt Console –
Org Config – Hub Transport cannot have any spaces in the name field.
I had some spaces and the emails were not downloading fully and able to send. Once I removed the spaces from the Name field and
restarting the Exchange and IIS services emails were now being sent and received ok.
Check
out :
http://social.technet.microsoft.com/Forums/en-US/exchangesvrmobility/thread/321eae51-9cbd-4a5e-85c1-68d8f7b523c3
This
is good one to add to your knowledge bank in case you come across it in the future.
Rgds Gerry
Maybe you are looking for
-
Dear support team, Could someone please respond to Eric's questions? Eric works at Bonneville Power Administration and they are gearing up for another major LabVIEW and DSC project. He may have LabVIEW 7 beta. I am on my way out of town for two weeks
-
Dear All, In my company there is finished material which is having both purchase & sale,when i m doing return to vendor through movt type 161,part1 & part2 is not updated.if we do J1IS through ref of matrl doc for cancelling excise invoice will the r
-
Please help me read this Problem Report
Hello, I have a MacBook Pro 15 late 2011 and is rebooting abruptly lately. I have taken out the memories and cleaned. I've also done the Apple hardware test and everything is supposedly well. I don't know what else to do. Thanks Interval Since Last P
-
I have a 17" Apple CRT hooked up to my 15" PB in extended desktop mode. Is there any way of using one monitor to preview the movie while using the other to work, like FCP or an Avid? PowerBook G4 1.25ghz Mac OS X (10.4.5)
-
If I use mpeg streamclip to pull footage off DVD - after I edit it and export to quicktime via fcp should I still export it to compressor or can I just use DVD studio or iDVD. In my previous workflow I would export to iDVD or dd studio pro but wanted