TS3694 I have the latest update on my iPad. when trying to do a restore iTunes is trying to give me the updat I already have.
I lost my play list, when trying to use Home Sharing, So I turned Home Sharing off and sync over WI-Fi off, and tried to sync my original play lists back. That did not work. So I decided to do a restore (I need to clean up anyway) I have the latest update for my iPad, but iTunes keeps trying to update my iPad and its taking up to 20 hours to do it, then it fails. This is very irritating seeing as I work with these products everyday as I am IT support for my company. I have tried different cables both USB and Ethernet and WI-Fi. I have tried each one of my computers that are authorized; laptop, mac book pro, and my PC. Please give me a solution.
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Cheers, Tom
Similar Messages
-
When I go to Yahoo mail it tells me I should upgrade to the latest version of Safari. When I go to apple to do the upgrade it says I am using the latest version.
What am I missing here?You can avoid using web based email for Yahoo.
Open Mac Mail. From the menu bar click Mail > Preferences > Accounts > Account Information
Then click + to add your Yahoo account. -
new apple update gave me an error yesterday and is making me restore itunes and it just freezes up at the same place everytime. I have checked for new updates on itunes and am running 11.1.2, restarted my computer 3 times and rebooted my iphone like 5 times and nothing new is happening.
You may need to put the iPad in recovery mode to restore it.
http://support.apple.com/kb/HT1808 -
When I try to purchase from itunes, it does not give me the option to buy. I am logged into my acoount and have a balance to purchase songs/music with. Has anyone else had this problem?
Is the item compatible with your model iPod and iOS version? If not you will not get a Buy option.
Have you purchased media from that country's iTunes?App store before? -
I have a 4S and just tried updating to the latest iOS version and my phone went into recovery mode and iTunes says I need to restore to factory settings. Anyone know how I can fix my phone without losing all my content?
You would only be able to restore to a backup to iCloud or iTunes:
Restore from Backup
Cheers,
GB -
I just downloaded and installed Photoshop cc and the Camera Raw version is not the latest one available,so now I can no longer open files from my Nikon D750! Can I update ACR?
I have been using the new version of ACR with PS6 and have been able to open the D750 files,now I'm stuck.
Thanks,
Greg EYou were probably using the Release Candidate version of camera raw 8.7, which one gets from Adobe Labs.
http://labs.adobe.com/technologies/cameraraw8-7-cc/index.html -
I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond. I have tried pressing the two buttons together and briefly get the Apple logo but still can not restart, the logo disappears. I have tried connecting to my iMac to restore the iPad but the device does not show up (I have an old iMac). What else can I do?
You need to be running Snow Leopard 10.6.8 at the very least in order to sync your iPad with iTunes so you could update your Mac, if it can be updated, and if you care to do so.
If that's not an option, you will have to find someone that can restore the device for you with their computer running iTunes or make an appointment at an Apple Store and ask them to restore the device for you.
I hope that you have an iCloud backup, because you will lose everything on the device when it is restored.
Snow Leopard can still be purchased in the U.S. Apple Online Store.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Also, I would not give up on the reset technique....holding down on the sleep and home buttons at the same time until the Apple logo appears. It takes about 10-15 seconds and sometimes just a little longer to get the logo to appear. -
before downloading the latest version of I-Tunes, I used to be able to view the ALBUM ARTWORK at bottom left when clicking on a song.
I am now unable to see the artwork.
Is it no longer possible with the updated software ??Correct, Apple have removed that feature. However, you can still see the artwork of the song that's playing; it's shown in the Now Playing indicator at the top of the iTunes window. It is small, but if you click on it, a larger version pops up.
Also, in Albums View, you can see the album artwork. -
Hi everybody..i have an enigmatic problem since i bought MacBook Air..i can't watch youtube videos and i did install the latest adobe flash player BUT when i start to install it the system keeps asking me to enter a password ? which password i need ??????
Your admin account password.
-
after update to the latest version on my ipad, it no longer connects to the internet nor can i send emails. when plugged in to sync with itunes, it remains 'stuck' at syncing step 2 of 7 backing up. has anyone had similar problems? any solutions?
I had this problem. I held down the power switch to power down completely. Takes a few seconds. Then use the power switch to turn on. Might take a couple goes.
Kirk -
Hi, please help me , i get notification about a new update for my iPad when I do the instal for the new version it is asking me for a passcode but which passcode may I have to enter? Because when I enter my gmail passcode it is call me that my passcode is failed
The passcode you need to enter is the passcode you set on your device. It is the passcode that you enter when you turn on your iPad or awaken it from sleep after and Auto lock.
If you do not know or remember your password and did not store it somewhere then you will have to restore your device.
http://support.apple.com/kb/HT1212 -
I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
I have an Ipad and an Ipod Touch 5th gen both on the latest firmwares but they won't connect via Bluetooth whenever I try even though both shows that the devices are discoverable. I also tried connecting them with my Bluetooth enabled laptop but it also didn't worked. Because of the Bluetooth not working I also can't enable airdrop.
What model iPad?
What model computer and OS version>
AirDrop requires:
What you need
To share content with AirDrop, both people need one of these devices using iOS 7 or later, or a Mac with OS X Yosemite:
iPhone 5 or later
iPad (4th generation or later)
iPad mini
iPod touch (5th generation)
You also need to turn on Wi-Fi and Bluetooth. If you want to share with your contacts, sign in to your iCloud account.
Learn more about using AirDrop to share with people using a Mac with Yosemite.
Use AirDrop to wirelessly share content - Apple Support
System Requirements
To see if your Mac works with AirDrop, make sure you’re in the Finder by clicking the desktop (the background area of your screen), or by clicking the Finder icon in the Dock. Then, check to see if AirDrop is listed as an option in the Go menu. If you don't see AirDrop listed, your Mac doesn't support this feature.
In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
your iOS device needs to include a lightning connector
your iOS device needs iOS 7 or later installed
your Mac needs to be a 2012 or later model with OS X Yosemite installed
Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.
To transfer files between two Mac computers, you need the Mac models listed below with Wi-Fi turned on and OS X Lion or later installed.
MacBook Pro (Late 2008 or newer)*
MacBook Air (Late 2010 or newer)
MacBook (Late 2008 or newer)*
iMac (Early 2009 or newer)
Mac Mini (Mid 2010 or newer)
Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)
*The MacBook Pro (17-Inch Late 2008) and the white MacBook (Late 2008) do not support AirDrop.
For help identifying your Mac, choose About This Mac from the Apple menu. You can refer to the Apple Support website to find out if your iPhone, iPad or iPod Touch includes a lightning connector.
Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support
Otherwise you need an app to pair via BT one iOS device to another iOS device. There may be apps that allow pairing with a Mac computer. The iOS devioces do not have the BT profiles necessary natively to pair with a computer or another iOS device except for AirDrop -
after installing the latest upgrade firefox just hangs when opening - was fine before. have tried deleting restore session but worse not better now. no change with firewall.
== This happened ==
Every time Firefox opened
== yesterday, after installing the upgrade ==
== User Agent ==
Opera/9.80 (Windows NT 5.1; U; en-GB) Presto/2.5.24 Version/10.54I'm using Mac OS 10.4.11 & even typing this message the characters appear so slowly that I could get a hammer and chisel and inscribe the words faster than the new Firefox runs. WTF?
-
my iphone was being updated when it was ready to restore it stops sayin an error ocured, the phone wont oparate cant get it to restore
any specific error messages? If so, check out http://support.apple.com/kb/ts3694 for solutions
if not, force restore: http://support.apple.com/kb/ht1808
NB: make sure you have a backup, because following the last article will remove all data/content on the device.
Good luck
Maybe you are looking for
-
New user and disgusting features - solveable questions?
Hello all there I am a new iPod owner, migrated from a hateful 2 year old (now completely broken due to hate) MP3 player, and despite there are some interesting features, I have found some others that are making me considering asking my money back. L
-
Hello, Could someone tell me the location of BI Pubs major log files. I am using BIP Enterprise Edition 10.1.3.2 Thanks, Matt Soukup
-
Setting default sound card to card 0
Hi, After following Arch Wiki for configuring Alsa I added the following to my /etc/asound.conf: efaults.pcm.card 0 defaults.pcm.device 0 defaults.ctl.card 0 This works on my current session. However, sometimes when I reboot my computer, my primary s
-
Hello I have never programmed with Java, and dont know, what i can do, I use PHP, but, i am only a novice at it. I was wondering, is it possable to get data from a page, and put it into an image? if there is no data from the page, it will ask for the
-
I am creating reports in information publisher and wish to include charts from SQL to summarise the data. As some of these reports will include job execution status and similar status fields it would be useful to show Failures in Red and Successes in