TS3899 i have followed info re not being able to set up an email account plus trouble shooting tips and still cant get email account to work

I have tried to set up a hotmail email account on phone but it keeps saying cant verify and then says password I'm entering is incorrect.  I know its correct password as I have reset it via PC... any ideas please?

You might want to try removing they email account and setting it back up again

Similar Messages

  • Some of the keys on my keyboard do not work.  I've run through the trouble shooting tips and still no solution.

    Wireless keyboard - Not all Keys work.  For example: the top F1 through F12 and the right side shift key do not work. 
    Any thoughts?
    Thank you in advance. 

    Fast answers:
    1. Try resetting NVRAM/PRAM and SMC. Doesn't usually 'cure' keyboard problems you report, but it costs nothing and only takes a few minutes.
    https://discussions.apple.com/thread/3819550?start=0&tstart=0
    2. Try plugging in a USB keyboard. Doesn't absolutely have to be a Mac keyboard. A PC keyboard will work for a test. If the typing problem does not occur with the USB keyboard, you have a temporary solution until you can arrange to visit a repair facility.
    3. If your MacBook is older and has a user-removable battery, shut down the computer, remove the battery, and examine it for signs of 'bulging' or swelling. Then connect the computer to the Magsafe power supply, without reinstalling the battery, and turn it back on. If the keyboard problem has gone away, it was likely caused by a swelling battery.

  • ITunes unable to recognize iPod, error message along the lines if "iTunes has detected an iPod but unable to recognise" I have followed all the trouble shooting tips and am still stuck? I am now being told by a friend I need a link sent to me to fix this

    Hi,
    I am need of help! I have had this issue for a while now and it's becoming frustrating.
    My iTunes installed on my HP Windows 8 Netbook is unable to recognize my iPod, the error message along the lines of "iTunes has detected an iPod but unable to recognise"
    I have followed all the trouble shooting tips and am still stuck? I am now being told by a friend I need a link sent to me to fix this??
    Someone please help me fix this problem.
    Many thanks.
    Matt.

    Hi
    So just close iTunes and re-open iTunes thats it and that worked for you?
    When you say reset your settings do you mean to factory settings? As my iPod was swapped at the store for a new one and the problem is still there...
    Thanks.

  • I have an apple ID but have not been able to set up an itunes account. How do I set up an itunes account?

    I have an apple ID. How do I set up an itunes account which I need to use with the apple tv for accessing netflix?

    http://support.apple.com/kb/PH12507
    Regards.

  • I have a ipad 2 3g and i cant get the 3g to work

    i have a ipad 2 3g and i cant get the 3g to work

    Well .... there's zero useful information there. Absent any other information, I guess I could say go to Settings and turn Cellular ON.
    Seriously, try writing things more like this:
    I don't understand what you're saying. Please try the following if you'd like to save yourself and others a lot of time:
    Describe what you are trying to do
    Describe how you are trying to do it, in as much detail as you can.
    Describe what you expect to see or have happen when you do it that way
    Describe what you see or what happens instead of what you expected; include any error messages that appear.
    Provide some idea of what you have already looked at or already tried doing to fix the problem, along with the results of those attempts.

  • HT201210 I am trying to restore factory settings on my old iphone 4 so i can do the trade in program but i keep getting error message 3014 and i have tried all trouble shooting tips and nothing is working does anyone have any advice?  Thank you

    I am trying to restore factory setting on my old iphone 4 so i can send it back to my wireless company for the trade in program.  I keep getting error message from apple 3014.  I have tried all troubleshooting tips and still get the error message.  Does anyone have any tips?  Thank you

    I've tried a lot of the stuff mentioned at that link and elsewhere, modifying host files etc. trying to downgrade my iPhone 4 back to 5.1.1 no luck , apple has locked up 5.1.1 for my phone and iPad . one post said I'm "stuck with iOS 6" darn I should have been more careful. I have the 5.1.1 Ispw on my MacBook its a permissions thing I don't understand. I'll post when I find a way around it and I will . iOS 6 took away most of my AirPlay functionality . to hek with iPhone 5 I'm starting to look at android. big bummer apple

  • HT201413 I am trying to update my ipods and I keep getting an error message saying iTunes could not back up the ipod because a session could not be started.  I have followed all trouble shooting advice and still the same message.  Any suggestions would be

    I am trying to update my iPod touches and keep getting an error message saying iTunes could not back up my iPod because a session could not be started.  I have followed all trouble shooting advice found on the apple website, unplugged and replugged the device, restarted my computer, etc.  Any suggestions would be much appreciated.  Thanks

    I have the same issue, except I can't even sync.

  • I cant get any pop ups to open? i have allowed sites and still cant get anything, so turned off and still cant enlarge pictures etc thru a pop window

    i have firefox version 3.6.10, and until about a week ago, i had no problems clicking on pictures (example: on ebay) to enlarge them in a new pop window. i have tried disabling the pop up blocker completely, even though i had ebay as an "allow" site on my pop up blocker when it was enabled.
    cant get any pop up to go through. in the lower left hand corner of the window, when i click on a link that should open a pop up window, all it shows is "javascript:;" and nothing happens
    i have updated to the newest version of java and deleted older version.. still having issues

    Ouch, tough spot, but offhand I'd say some memory may have gone bad, or maybe just needs re-seating after all this time.
    Not much you can do, but try this anyway...
    PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/ht1379
    In fact, do 3 in a row, takes a bit of time.

  • I've been able to trick my ipod into letting me in but I still cant get the touchscreen to work. I've reset it 10 times and I dont have a computer at my house so I am unable to connect it to see whats wrong do I just need to get a new ipod or what this is

    I have been able to trick my ipod into letting me in but I still can't get the touchscreen to work this is extremely annoying and I was wondering if i should just get a new ipod or what?

    You need a computer with iTunes and an internet connection
    Try:
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                                              

  • TS1702 I download the app eNotify to my iPhone 4 but have not being able to linked to my Gmail account. Keep giving me the notice that user or server is not correct. What I need to correct the problem?

    I download the app eNotify to my iPhone 4 but could not linked to my Gmail account. Give me notice that user or server given is incorrect. It instructed me to go to phone settings and make correction but not working still. I need help. I"m not savy in technology.

    Hello there!  You can contact Verietas Support at [email protected]  The most usual error for gmail is that user name is NOT the full email address.  You just want to enter the stuff BEFORE "@gmail.com".  Good luck!

  • TS4079 Siri is not working since 7.0 upgrade - if I turn Siri off it works with voice command. Microphone functions with other apps just fine. I have gone through the trouble shooting page and still nothing. I read others are having the same issue.

    I have restarted the phone and reset it - Siri still not working. It does not pick up any voice - just lists some options.

    I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
    As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
    I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
    As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

  • TS1363 i have unstalled and reinstalled itunes and still cant get my ipod on itunes

    i keep getting a message saying that my ipod can not be connected i have uninstalled and reinstalled i tunes and it still not registering what can i do now thanks

    Hi jim2744,
    If you are having an issue with your iPod nano not appearing in iTunes when it is connected, I would suggest that you troubleshoot using the steps in this article - 
    iPod nano (6th generation) - iTunes Troubleshooting Assistant
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • HT6147 how do i update my ios 7.0.6 i have my ipad hooked up to my laptop and still cant get it

    i need help updating my IOS 7.0.6 on my ipad

    Connect to iTune and Check for Updates (tap to enlarge image).
    Note: This update is only for iPad 2 and above.

  • HT1212 i have tried all of the suggested things still cant get in the ipod

    i have tried all of the suggested things and still cant get in the ipod

    As instructed in the If you have never synced your device with iTunes, or you do not have access to a computer section of the article, put it in recovery mode and restore:
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

  • I have set up a apple id and i still cant get my imessage or facetime to work?

    Set up a apple id and still cant get my fact time or i message to work

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Maybe you are looking for

  • Is It Possible To Change the Order of Folder in Local View (i.e. Move Up or Down?)

    Hi, This would make it easier for me to locate files. I am not sure when I was creating folders in what order they appear in my root folder

  • In query, turkish column name is not displayed correctly?

    In my characteristic and key figure infoobjects , i used turkish characters for explanation but in Bex they are displayed as illegal characters for column names. How can i correct this or where would i make a mistake? Thanks.

  • Unable to see converted NEF to DNG files in Photoshop CS

    Aloha, my laptop recently crashed and I am in the midst of trying to restore my laptop to the way it was.  I am using Photoshop CS and back in December 2009 I downloaded DNG converter.  I am using a Nikon D90, shooting in RAW.  I don't recall what I

  • Creating a list of cross-reference formats

    Is it possible to create a list of used/unused cross-reference formats? I've been able to create a list of paragraph tags used in a book file, which was very helpful in my current project. I was hoping there would be something similar for the user-de

  • Problem in execute query?

    hello all, table structure: create table cor_dept_mst (dept_locn_code varchar2(6) not null, dept_code varchar2(2) not null, dept_name varchar2(200), constraint cordeptmst_pk primary key(dept_locn_code,dept_code)); in form all 3 feilds dispaly. when i