TS3899 I've tried all of the suggestions but my mail still sits in the outbox. Incoming working fine.
My live.com mail won't send. Have deleted acct and recreated, powered off, closed outlook on my laptop to no avail? Any suggestions?
HI, and thank you for your reply. I am a bit confused however as I would have thought that once I turned off the engine of my car the transmitter and ipod would be also off???? Is there still power coming into the cigarette lighter when the car is off>????? i have a mercedes c class. The cigarette lighter is still working and the transmitter is still working. Are you saying that by leaving them still plugged in even though the car was idle and not running it still destroyed the hard drive???? Also could this happen if a person leaves it docked in a radio cd player but is not listening to it, is it still charging and could this have burned out the hard drive. (i always left it docked) until i bought the transmitter for the car.
Your thoughts would be much appreciated as obviously I do not want to make the same mistake again.
kind regards
Similar Messages
-
my phone is stuck at the apple logo, it will not reboot, have tried all stanadard reboot techniques, but no luck, even left the phone battery die, still no luck.
Hi kjsav7,
When you state you have tried all the standard reboot techniques, does that include recovery mode?
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
If your device gets stuck during startup
When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Take care,
Nubz -
My granddaughter put the Start Up Disk in the drive inadvertently and now the drive will not eject it or start up using the HD. I have tried all of the suggestions for opening it that appear in the manual. Help? It is her computer, a iMac G3 or G4 with superdrive, the one with the ball shaped base. Thank you.
It's a tray loading drive, there should be a little hole next to it, just large enough for a paper clip. Stick the end of the paper clip in it and the tray should open.
Miriam -
When I try to open itunes on my school network windows Xp computer I get an error message with this code 0x80092013. I have tried all of the suggestions from apple support document but nothing has worked.
Have you left the iPod to charge for a couple of hours and then tried resetting it again? It can take up to at least 30 minutes of charging before an iPod with a dead battery shows any signs of life. By a reset, I assume you mean pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear?
iPod won't turn on
B-rock -
My iPhone 4 turns off (crashes) after accesing any apps, It work fine when plugged to charger (power supply). I tried all troubleshooting steps suggested by Apple but it doesn't work. I backed up my phone. I restored it several times. Even I re-installed iphone software. Also I restored it as a new iphone but doesn't work. What could be the problem and what are the availble solutions?
We can't know if there's a "fixture" because we can't examine your phone. But Apple can. Make a Genius Bar appointment and get your phone evaluated.
-
HT1212 i have tried all of the suggested things still cant get in the ipod
i have tried all of the suggested things and still cant get in the ipod
As instructed in the If you have never synced your device with iTunes, or you do not have access to a computer section of the article, put it in recovery mode and restore:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device. -
I've tried all of the suggested solutions, but I still can't get my cd drive recognised on my laptop. If I delete the driver and reboot, the cd drive appears, but as soon as the driver automatically installs, the driver disappears into the Q: drive, which is not accessible and neither is the CD drive
I had the same or similar problem after installin iTunes 11 on my Acer Laptop with Vista. The new iTunes ran but I
completely lost access to my CdRom/DVD drive. Error Code 19 was displayed in Windows Device Manager. Found out
this is more widespread of a problem than expected. After trying several forum recommended fixes, the Only thing that gave me back my CdRom drive was doing a Windows Restore to a date prior to iTunes 11 install. I got my drive back but it also restored me to the prior 10.0.7.21 vers of iTunes which no longer worked due to missing files. iTunes help
recommended a Reinstall. I am reluctant to do that for several reason. That's where I am at for now until I find out if there are any other risks for using iTunes 11 vs. Registry Errors vs. Losing access to my CdRom drive. Brad -
I can't sign out of iCloud on my iPhone 4 because I have the locator turned on for my phone and don't know the old password for my old Apple ID. I've tried all of the suggestions seen on here and the Apple ID site and cannot delete the cloud. Help?
LPC1979 wrote:
... it keeps asking me for the OLD password (2 email addresses ago) and then when entered correct tells me the account does not exist...which I already know. ...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team... -
I have tried all of the suggestions and still keeps asking me to authorize my computer for only a few songs that I have purchased.... HELP???!!!
Delete and redownload them if doing so is free in your country.
(69918) -
My iPad keeps crashing and I have tried all suggestions and they worked but not for long. Any suggestions? Very frustrated.
If you really tried all of the suggestions in all of the forums, there is nothing left to try. Make an appointment at an Apple Store and ask for their help. They have more sophisticated means of diagnosing and restoring than we have as device users.
-
Hi everyone! WE just got an ipod touch 8G. We do have wireless internet, but can't join the network with the ipod touch. Message comes up.."unable to join the network".....very frustrating! We have tried all trouble-shooting suggestions on the site, but nothing is working. Anyone out there got any ideas for us?? The router is a Linksys WRT120N.
Thanks for any help any one can give!!!Does the iPod connect to other neworks?
Do other devices connect to the network?
What encryption are you using?
How you tried changing the type of encruption? Changing to no encryption? -
I did an auto software update on my iMac, which included a restart. When the machine restarted it's stuck with an Apple logo and spinning wheel. I've tried all of the key strokes that are supposed to work, but nothing has. Any suggestions?
Gray screen could be any number of things, bad third party at boot kext file, a bad Apple one, a bad install/upgrade of OS X, drive corruption etc.
Run through this list of fixes
Step by Step to fix your Mac -
inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model
Hi,
I would try a Safe Boot first. (This will take longer than a normal Boot and you will need to Restart afterwards).
If it were an older OS I would also suggest going to System Preferences > Displays and making sure the display is set to Millions. (My MacBook Pro does not have this option in Snow Leopard so I did presume Snow Leopard does not have it).
With some laptops there have been some issues with the cable up the back of the screen pulling loose with regular and frequent use of the lid, but this will not apply to you based on your specs. (it does take time to appear and is also somewhat rare). However it seems enough contact with the camera can make it appear in System Profiler and power it on but not give a pic.
If a Safe Boot does not work I would also try a PRAM reset.
Shut down the computer.
Restart it holding down Apple/CMD (or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
This is actually "less" destructive in that it clears less memory items than Safe Boot but they are different enough to warrant trying.
Do you have an older version of iGlasses installed ?
The one for Leopard does not work for Snow Leopard.
Do you have Web Browser open ?
This may point to Google Video Chat Plug-in and Flash Conflict. It would be rare to allow another app to access the camera even if not displayiong a Pic.
(Chrome Installs the Plug-in as does the standalone download).
Knowing what "any application" exactly you are trying might help us pin it down.
Any additional downloaded apps that can use the camera ?
Do you happen to have something balck in front of the camera ?
8:20 PM Sunday; October 9, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
My iPad 2 has a hoe button that is not responding constantly. It will either work right away or not respond for up to an hour. I have tried all of the suggestions posted on other questions and it's becoming ridiculous. I have a warranty but am afraid that if I get another iPad 2 the problem will continue on the new one.
Ccote15-
If your iPad is defective and is still under warranty, you can take it to an Apple Authorized Repair Center and get it fixed. If you are worried about a defective replacement, then a repair may be a better way to go. <Apple Authorized Repair Centers>
Personally, I would prefer getting a replacement. You read about many defects here in this forum, but they only represent a tiny percentage of all iPads sold.
Fred -
When I try and launch Firefox, I get this error message >A copy of Firefox is already open. Only one copy of Firefox can be open at a time." and have tried all of the trouble shooting tips, can you help? I thought if I were to completely uninstall and re install it might help, but I cannot seem to find instructions to do this....
See [[Firefox is already running but is not responding]], the image shown in that article is the Windows equivalent of the error message that you are receiving, but the information relates to the Mac.
Maybe you are looking for
-
Alignment on a specific character in an af:table column
Hello, I have an af:table with columns containing vehicle kilometer counter, average speeds, running hours... These values may contain décimals, but not always. And I would like these values to be aligned on the decimal separator (. or ,) in the tabl
-
How to get out of recovery mode in ipod touch 4thgen?
Hello Apple i am rohith. iam having ipod touch 4th gen. it has ios version 4.1. recently i tried to update it, i have downloaded the update also but while installing an errour has occured and it has gone to recovery mode. can u please give your answe
-
Hi all, How a normal BPM process in Netweaver is Related to Web services. Is BPM process internally using SOAP Webservice? because i see a webservice model in webdynpro component using a BPM process component. is the knowledge of webservices is requi
-
Nested Permissions Heirarchy in SharePoint 2010
I have not found a clear answer to the following question - For any sub site, list, library, or other SharePoint object with non-inherited unique permissions, what happens if a specific user is individually listed with their own ID with , say, for ex
-
Delta in BW after R/3 archiving
Hello, following question: Currently we are thinking about R/3 archiving (with archiving objects). R/3 and BW are connected. In R/3 we want to archive e.g. year 2000 and 2001. In BW are all line items from 2000 - today. What will happen after a R/3 a