TS3977 Issue with extended display using Displaylink USB to DVI since upgrading to Mavericks.

I have an issue now since upgrading to Mavericks with my extended display monitor using a displaylink DVI to USB adapter. After awhile, the monitor goes blank. I can unplug the connection from the USB port and plug it back in and the display comes back, only to go out again a short time later.
It worked fine for months prior to the upgrade.
Apple say it's Dispalylink's problem and Displaylink says it's Apple's problem. Anyone else having this or a similar isssue?

Someone opened a bug report with Apple in another thread - about a different product that used DisplayLink drivers, and Apple blamed the vendor.
I have many issues too. Crashing Window Manager, and once it crashed my Mac.
I also have many issues... one is corrupt display. The icons are missing in the menubar on my laptop, and squished together on my external monitor:
They are there if I mouse over, but invisible.
I can't click on the squished ones, they are to close.

Similar Messages

  • I need to connect my Imac 27'' (newest version) up to 3/4 monitors (all 40'' LCD tv's with VGA and HDMI connections) with extended display to all external screens, not duplicate images. Is this possible?

    i need to connect my Imac 27'' (newest version) up to 3/4 monitors (all 40'' LCD tv's with VGA and HDMI connections) with extended display to all external screens, not duplicate images. Is this possible?

    I would suggest you visit an Apple dealer, preferably an Apple Store if there's one in your city, and ask for assistance in determining what you need. The questions and issues you bring up are rather complex to address in a technical support forum and would be better addressed in person where you and the salesperson can ask questions back and forth to arrive at the optimal setup.
    Regards.

  • I can not get my Ipod to connect with my computer using a usb cord

    I can not get my Ipod to connect with my computer using my usb cord ?

    Hi starhalcomb,
    I'm sorry to hear you are having issues with your iPod touch. I also apologize, I'm a bit unclear on your exact configuration. If you are having issues with your iPod touch not being recognized in iTunes when you connect via USB, you may find the information and troubleshooting steps outlined in one of the following articles helpful:
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    If you don't see your connected device in iTunes for Mac - Apple Support
    Regards,
    - Brenden

  • Major Issues with Thunderbolt Display in Yosemite

    I have a MacBook Pro (Retina, 13-inch, Early 2013). I'm having issues with thunderbolt display connectivity despite recent Thunderbolt Firmware update. The sleep wake function is not working and display with shut off sporadically.
    MacBookPro10,2   Processor Name: Intel Core i7   Processor Speed: 3 GHz   Number of Processors: 1   Total Number of Cores: 2   L2 Cache (per Core): 256 KB   L3 Cache: 4 MB   Memory: 8 GB

    Same problem here. I was so excited to see a firmware update this morning for my mac pro, and sure enough as i sat here, the display went black again.

  • Compatibility issue with developer 6i using (64 bit) OS

    Hi All,
    I am using oracle 9iR2 (32 bit) on Linux Red Hat (32 bit) with developer 6i. Now i want to upgrade OS Red Hat (64 bit) and migrate database 10gR2 (64 bit).Is there any compatibility issue with developer 6i using 64 bit Red Hat OS / Oracle Database ?
    Thanks

    Is there any compatibility issue with developer 6i using 64 bit Red Hat OS / Oracle Database ?
    No, as long as developer 6i is at least patch 16. We use it.

  • Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

    Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
     What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
    Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
    I have tried these:
    1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
    2. I tried putting back my old 2.5" and nothing but black screen.
    Thoughts and suggestions?
    Solved!
    Go to Solution.

    Hi Autoexit173,
    Welcome to Lenovo Community!
     As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
    As you have mentioned that the system not booting, please try to remove the RAM and  turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
    Click here for the steps to remove the RAM and refer page number 40.
    Hope this helps. Do post back if issue persists!
    Best regards,       
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports.  Any su

    Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports.  Any suggestions?
    MacBook Air, OS X Mountain Lion (10.9.1)

    Obviously, syncing an iOS device with iTunes over USB is still supported in Mavericks. Calendar and contact syncing with iTunes is no longer supported. That has nothing to do with your problem.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Since upgrading to mavericks I cannot scroll with my mouse in mail - I have to use the keyboard arrows

    since upgrading to mavericks I cannot scroll with my mouse in mail - I have to use the keyboard arrows

    Hopefully this is what you are looking for: 
    Canon MP560 series:
      Status: Idle
      Print Server: Local
      Driver Version: 10.84.2.0
      Default: Yes
      Shared: Yes
      URI: usb://Canon/MP560%20series?serial=254057
      PPD: Canon MP560 series
      PPD File Version: 10.84.2.0
      PostScript Version: (3010.000) 705
      CUPS Version: 1.7.2 (cups-372.4)
      Scanning support: Yes
      Scanning app (bundleID path): -
      Scanning app version: -
      Scanner UUID: 00000000-0000-0000-0000-323534303537
      Printer Commands: PrintSelfTestPage ReportLevels
      CUPS filters:
    Raster2CanonIJ:
      Path: /Library/Printers/Canon/BJPrinter/Filters/Raster2CanonIJ/Raster2CanonIJ.bundle/ Contents/MacOS/Raster2CanonIJ
    Hope

  • Since upgrading to Mavericks, 10.9.1, pictures that come attached to emails no longer display.  There is only a blank space that after about 1 minute, has a small box with a question mark.  How can I go back to attached images?

    Since upgrading to Mavericks, 10.9.1, pictures that come attached to emails no longer display.  There is only a blank space that after about 1 minute, has a small box with a question mark.  Double clicking on the box will open the image in a separate window.  It's very slow and tedious for multiple images.  How can I go back to attached and displayed  images?  If I click on "Forward", the images appear instantly in the email to be forwarded.

    Scott,
    My problem seemed to fix itself.  Or, by shutting down the computer one night, instead of putting it to sleep, may have reset something.  Since updating to Mavericks, I always (or usually) let the computer sleep overnight or anytime I'm walking away from it.  A few days ago, I was updating notes for my kids about how to find all my stuff and how to turn on my computer, so I wanted to rewrite the start-up procedures for the iMac, just in case they ever need to.  Well, I shut it down one night so the following morning, I could write down each step.  Lo and behold, the images, etc. are all there again!  Solved, but I'm not sure why.
    Tom

  • Anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find my provider. I swapped SIMs with another iPhone 4 on ios 4 to confirm device problem.

    Has anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find AT&T, my provider. I swapped SIM cards with another iPhone 4 running ios 4 and established this is a device problem, not a SIM card problem.

    Does the device get any signal? 
    Sounds like the device may have had a hardware failure.  If it is out of warranty, the only option is the Out of Warranty replacement.
    AppleCare is only an option if it is still under the original warranty.

  • Unable to print with HP Color LaserJet 2605dn since Upgrading to Mavericks

    Since upgrading to Mavericks, I've had nothing but problems printing to my HP Color Laserjet 2605dn.
    I'm having this problem on both my iMac and my MacBook Pro.
    I get errors like:
    "unable to write pirnt data broken pipe"
    "unable to send data to printer"
    "printer not connected"
    I've been reading responses to others with similiar issues and I've tried
    deleting and re-adding my printer.
    reseting my printing system
    Installing Guenprint.
    re-adding my pirnter with a generic PCL driver.
    None seem to correct the problem.
    This problem happens both when connected directoy with USB and when connected through the network.
    I have no problem printing with my work (Wondows) laptop.
    Any help would be appreciated.

    Thanks, a brody.
    Yesterday (before I read your response), I downloaded the latest firmware (20140413.) (What do they say about great minds?)
    I thought the issue may have been resolved.
    I was finally able to print my bank statement on both the iMac and MacBook.
    Today, I'm back to the the same issues.
    Very frustrating, even though I've had the printer for five years, I've printed less than 20,000 pages.
    In my mind, it's pointing more and more towards a hardware issue.

  • Can't use ch340g serial port driver since upgrading to Yosemite on MacBook air

    I use my MacBook air with the Arduino 1.0.6 IDE. Since upgrading ( free upgrade) to Yosemite. I can no longer acess the ch340g serial port. (does not show up in arduino ide). I tried re-installing the driver. I get no errors and am told the install was successful. This was working very nicely before the upgrade. I now have three boards I cannot use. I am at a loss as to what I should do.  I suppose I could go back to Maverick but then I would have to go buy the operating system. This seems wrong to me. I was offered an upgrade that then leaves me up the creek without a paddle. Any help given would be highly appreciated.

    I have the same problem, a non stable CM341 serial to tty driver on Yosemity on a MacbookPro Retina.
    I followed the advice of Rsattaur, I executed the command: sudo nvram boot-args="kext-dev-mode=1"  and now I have big problems with my USB-ports.
    The result is a screen-of-death after connecting anything to my USB-ports!!!!
    Harold

  • Proxy Issues since upgrading to Mavericks

    I use my Mac Mini (Model 5,1 Core i5, 2.3GHz) at work and run windows using VMWare. Since upgrading to Mavericks I cannot get OSX to connect to the proxy server. I am using the same settings as I used in Mountain Lion, which worked fine. I do not have any problems with Windows connecting.
    I can see the internal network, access files and printers, but cannot get through the proxy server to the internet. Oddly enough Dropbox on the Mac works fine through the proxy server so I have to think its a problem in Mavericks.
    I have tried changing settings including manually entering proxy info for all protocols under network settings.
    Unfortunately the IT guys only support Windows (which is working) so I am on my own on the Mac side.
    Anyone else having a problem or have a solution (besides waiting for an update)?

    One of the users just upgraded and is having this issue as well. I told him to use Firefox as that browser has no problems. This is a workaround at best as the Apple Store is still inaccessable. I believe the problem lies with Safari's implementation of SSL as normal http:// sites load, albeit very slowly. Any sites that use https:// are unavailable.

  • FontBook issues since upgrading to Mavericks

    Since upgrading to mavericks when i try to install new typefaces (.otf, work perfectly on my other computers which are running on mountain lion). They do not show up in font book. Even when I manually add them to the Fonts folder, they still do not show up in Font Book or any of my applications. As a graphic designer, this is obviously a huge issue for me.
    Not to mention, this isn't the only problem I have since upgrading. For example all of my adobe programs are suddenly riddled with bugs (issues resizing assets, drop down menus dissapear, etc). I have been trying to trouble shoot several issues for a while now with no solutions. All of the problems I have seem to be experienced by other users. It's very frustrating to me that the new OS is so buggy. I have never had this problem before when upgrading products.

    One of the users just upgraded and is having this issue as well. I told him to use Firefox as that browser has no problems. This is a workaround at best as the Apple Store is still inaccessable. I believe the problem lies with Safari's implementation of SSL as normal http:// sites load, albeit very slowly. Any sites that use https:// are unavailable.

  • HT1338 I have an i mac with OS X 10.5.8  how do i upgrade to maverick?

    I have an imac with OS X 10.5.8  How do I upgrade to Maverick?
    Thanks,

    mnbvlkj wrote:
    I have an imac with OS X 10.5.8  How do I upgrade to Maverick?
    Thanks,
    The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
    It is Not available as a download... It is a Paid Upgrade.
    Do this first...
    Check that your Mac meets the System Requirements for Snow Leopard...
    Snow Leopard Tech Specs
    http://support.apple.com/kb/SP575
    If so... Purchase a Snow Leopard Install Disc...
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Other countries...
    http://support.apple.com/kb/HE57
    After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes.
    Be sure to make a Backup of your Current System Before Upgrading...
    Next... MAVERICKS...
    Check here to see if your Mac is compatible...
    http://www.apple.com/osx/how-to-upgrade/
    NOTE:
    It is both Prudent and Recommended to Backup Before any Major Update or Upgrade.
    If so... would recommend at least 4GB of RAM... if not 8 GB
    It is important to get the Correct and Matching RAM
    See Here  >  OWC RAM  >  http://www.macsales.com
    The above site also has videos on how to Install RAM should you need it...
    Also... Check here for compatibility of 3rd party Software you may be using... Also note that Rosetta is no longer supported in Mavericks, Lion and Mountain Lion...
    http://roaringapps.com/apps:table
    Mac World Installing Mavericks.
    http://www.macworld.com/what you need-to-know.html

Maybe you are looking for