TS4062 IM GETTING A CORRUPT OR NOT COMPATIBLE MESSAGE
hello. i had to change my phone and i backed it up on i tunes. i am trying to restore it now and half way threw the restoring process i get a message saying that the file ( myold phone) is corrupt or not compatible. Can u help me plssss?
Read https://discussions.apple.com/thread/4310977?start=0&tstart=0
Similar Messages
-
My IPOD needed repairing, so I backed up my personal data into a restore file. In the end my ipod was exchanged for a brand new one and now I am having difficulty with restoring all of my data that I saved.
While trying to restore through iTunes I keep gettingthe corrupt or not compatible error message. Does anyone have any ideas or experience with this issue?
Much Appreciated for any help!You can not restorea a backup made with a newer version of iOS to a phone with an older version of iOS.
1400 photos stored on the phone? Do you not EVER extract them? The camera roll is intended to be temporary storage. Like the SD card in a digital camera. You should be extracting them to your computer on a regular basis.
Contacts should be synced to a compatible contact manager or cloud service. If you were not doing any of these things, guard your backups with your life and make sure your computer is being backed up on a regular basis, because you won't be able to get them back until you get a new phone with at least the same version of iOS that your 4 had.
There are 3rd party applications that say they can extract this information from a backup file, but I don't have personal experience with them. -
I'm totally frustrated by iTunes and don't know how to solve my problem. Like a lot of people on here I'm not able to sync or back up my iPad2 with my iTunes (version 10.4.1.10). I'm running Win 7 Ultimate 64 bit. My iTunes worked just fine until the 10.4.xx updates came out and since June I've not been able to back up or sync the iPad2.
When I connect and try to sync I get the error message, “iTunes could not back up the iPad because the backup was corrupt or not compatible with the iPad.”
I've deleted all the old backups so there are none on my system. I've deleted iTunes and re-installed the 64bit version several times but it has not made any difference. I've read and followed several suggestions on these boards about how to remove and reinstall everything but none have worked yet. I'm stumped here.I had the exact same thing with my shuffle - same error message saying that it was corrupt so I restored it (wiping everything in the process) and the same message came up as soon as it reloaded. Thank god I didn't try it with my iPod or iPhone first. So many issues with this new version of iTunes!!!!!!!!
-
I attempted to upgrade my iPhone 4 to iOS 5.1.1. I selected 'back up' from the phone in the device menu and iTunes confirmed that the phone had been backed up. I then installed iOS 5.1.1 which wiped everything on the phone & now I am getting the error "iTunes could not restore the iPhone because the backup was corrupt or not compatible with the iPhone that is being restored".
I have tried restoring factory settings but iTunes simply will not restore from back up & I'm not sure what else to do!
Any advice would be much appreciated.I have the same issue and I KNOW my backup IS good. What happen is when you try to restore your phone apple says something like can I check for new updates and if you choose no, it just takes you back to the restore screen and a loop from then on. If you dont update from you phone then when you back up you will have the 5.0.1 back up and then when you update to 5.1.1 and then try to restore the backup from 5.0.1 it say it EITHER corrupt or incompatible.. It is incompatible and its hard as **** to restore back to 5.0.1. I followed the restore to a T and still getting errors. I lost all text history and have to reset up email. All just because I wanted a 1.2 Gigs of "other" space back.
-
I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod. This is the first time trying to backup the iPod. I have authorized my computer. Still no luck.
Go to iTunes>Preferences>Devices and select the iPod backjp and click on delete and try again.
Also
- Reboot the computer
- Try another cable
- Try another USB port -
does anyone know how to delete the back up for the ipod? I am getting an error message that says "iTunes could not back up iPod because it is corrupt or not compatible with iPod; delete back up and try again"
Go to iTunes>Preferences>Devices and highlight the backup you want to delete and click on Delete Backup
-
I have recently updated my phone and am attempting to sync it. I got the error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone". I deleted the backup, restarted my computer, and even restored the iPhone, but continue to get the same error message. What do I need to do now?
iTunes places the iPhone backup in the following location. Navigate there & delete everything in the backup folder, but not the folder itself. You will have to turn on "Show All Hidden Files & Folders" to see it:
Mac:~/Library/Application Support/MobileSync/Backup/
Windows XP:\Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7:\Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\ -
I'am getting an update error when am trying to upgrade to newer version (4.3.2)..the error message content shows that i tunes could not back up the i pod,because the back up was corrupt or not compatible with ipod..can anyone help me out to fix this issue
Hi,
Try here: http://support.apple.com/kb/HT1808.
Hope this helps!
---likeabird--- -
Every time I sync my iTouch I get the following message - "iTunes could not back up the iPod because the backup was corrupt or not compatible with the iPod. Delete the backup for this iPod, then try again." However, when I follow these instructions, delete the backup and try again - I get the same message. Any ideas what is wrong?
Hi,
Try this thread. https://discussions.apple.com/message/12661408?messageID=12661408
Carolyn -
I tried to update my iPhone4's, but get the following error message: iTunes could not back up the iphone "iPhoneName" because the backup was corrupt or not compatible with the iphone. Delete the backup for this iphone, then try again.
The solution will be found here, select your computer type and software.
http://support.apple.com/kb/TS2529 -
Trying to update my iphone to v.5.1.1 however it downloads the version but just at the end of updating my phone I get the message: iTunes could not back up the iphone as the back up was corrupt or not compatible.
How can I fix this?
ThanksThe backup and restore from the iCloud was a little unnerving since the restore erased all information from the iPod. The iCloud backup and restore took a long time, but worked. I was very grateful.
Trying again to backup to iTunes locally proved to be the same challenging problem. The same backup to corrupt file was the message. The status bar showing backup seemed to move faster to start, but then slowed to a creep toward the end before the error.
When trying to restore a backup in iTunes, the "Restore" button is grayed out since it is looking for a local copy. Any restore would need to be from the iCloud which already worked but isn't the final solution.
Your suggestions were good, I am just in the same boat. Any thoughts about doing the following?
1) creating a cloud backup
2) resetting the iPod to factory defaults
3) removing all traces of iTunes from my computer and
4) installing iTunes and setting up iPod from scratch.
This is the next thing on my list. -
I have an iPhone with iOS 7.1.1 and am trying to update to 7.1.2, but get an error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone"
Assuming you are using the current version of iTunes (11,2,2), open iTunes, click "Preferences" under the leftmost entry on iTunes' menu, then choose "Devices".
Find the iPhone's backup there, highlight it, and choose "Delete Backup". -
I had a very larger OTHER folder in itunes, Went and ask Apple rep at shop today and he advised to do a restore but 1st back..
I back up and then did a manual back to make sure it was done.
Then i started iphone restore, all done and now to restore back up.
But i get a error,
""Itunes could not restore the Iphone on marks Moblie Because the back up was corrupt or not compatible with the iphone that is being restored.""
My pc runs XP and software is up to date, checked this before back up.
Disable Anti Virus
Checked itunes is up to date. Ok
Unplug all leeds at back of my pc, except key board & mouse/monitor.
Unpluged Modem.
Did restore again but get same error message,
help please.Try this -
http://support.apple.com/kb/TS2529
Best of Luck -
I tried to restore a backup from a 32 Gig iPhone 4s (That seemed successful) to a 32 Gig iphone 5C and get the message "backup was corrupt or not compatible with the iphone that is being restored" Can anyone assist?
I have the same issue and I KNOW my backup IS good. What happen is when you try to restore your phone apple says something like can I check for new updates and if you choose no, it just takes you back to the restore screen and a loop from then on. If you dont update from you phone then when you back up you will have the 5.0.1 back up and then when you update to 5.1.1 and then try to restore the backup from 5.0.1 it say it EITHER corrupt or incompatible.. It is incompatible and its hard as **** to restore back to 5.0.1. I followed the restore to a T and still getting errors. I lost all text history and have to reset up email. All just because I wanted a 1.2 Gigs of "other" space back.
-
whenever i try to back up my iphone it gives me an error message "itunes could not back up (my)iphone because backup was corrupted or not compatible with your iphone" i already deleted the itunes backups through the prefrences tab. this has not helped. what am i doing wrong?
I have the same question and the only reply I've found on the forum was "change the USB hub", which HASN'T worked. So I am accepting new suggestions. Tks!
Maybe you are looking for
-
Unable to Delete the request in ODS
HI Friends, I am facing the problem with deleting request in ODS. I deleted the request in cube (PPV Analysis cube). But I unable to delete the request in ODS. it is showing the message request is already activated;no further QM a
-
Power whent down whils my Apple TV was updating. I get no signal and its blinking rapidly. Anyone know what to do from here?
-
Importing in 3.1 - I can't do two SD cards in a row without restarting?
I have just upgraded to Ap 3.1. I used to import multiple SD cards in succession after a trip away, and it seemed fairly simple: 1. Insert card 1 to iMac card reader 2. import images 3. use aperture to delete files from the card, and then move on to
-
Turning off display in Mavericks
I have a retina MBP. I am used to hitting shift-control-power to *just* turn the display off and lock the computer -- *without* putting it to sleep -- when I leave my desk. This still works in Mavericks 10.9, but it creates an annoying pop sound (Mac
-
Could do with help for a better expression
Hi guys im using the following code to detect if a file is a text file it works however it is possible to fool it by having a file file.txt.doc. can anyone suggest a better way to do this? bear in mind its a javascript function. var filter = /.txt/;