TS5167 iMac 2011mid with Radeon HD 6970m - videocard has been burned.

Hi. I have iMac 2011mid with Radeon HD 6970m. Yesterday my videocard has been burned (when i pwer on i can see only vertical lines). Can i change videocard by this program http://support.apple.com/kb/TS5167 througth your service in Moscow (Russia)?

You should be covered - usually replacement programs last for 3 years from the latest date of consumer purchase (when apple discontinues the model). This is typical, but by no means concrete as I have nothing to do with Apple or its replacement policies. Your model also meets those specifications. Since the replacement program is stated as wordwide, it should also be applicable in your country.

Similar Messages

  • Recently my IMac with osx 10.4.11 has been running extremely slow. To the point where I have tried restarting.I have run Sophos antivirus software and have found nothing. Any suggestions?

    Recently my IMac with osx 10.4.11 has been running extremely slow. It takes forever for Safari to switch screens. You can hear the computer constantly working. To the point where I have tried restarting.I have run Sophos antivirus software and have found nothing. Any suggestions?

    First remove the antivirus software, it's possible that could be part of your problem! Slow Mac's can be caused by many different issues, including failing HD's, a HD that is too full (OS X really likes to have about 10-15% of the HD available), insufficient RAM, etc.. To troubleshoot your problem I'd recommend looking over 25 Ways to Speed Up Your Mac.

  • I have Lookout 6.5 running with Windows 7, the process has been running for about 2 months with no problems, but today the Citadel stopped working! I am having a hard time getting it started again, need help!

    I have Lookout 6.5 running with Windows 7, the process has been running for about 2 months with no problems, but today the Citadel stopped working!
    How could this have happened and what can I do to get it running again? 

    Didnt realize there was a response, late getting back to you.
    Save your process files outside of the NI progam directory (you should have external backups already right ).  THey should not be deleted.
    Any customizations to the lookout.ini and lookout.sec file may be lost.  
    Mike
    Forshock - Consult.Develop.Solve.

  • Hi, guys. I have some problems with my ipad. It has been switched off and it does nor respond on any actions

    hi, guys. I have some problems with my ipad. It has been switched off and it does not respond on any my actions

    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Can't access story I Just bought Adobe story but when I press sign in there appears an ST logo with a spinning @bar that has been on my screen for hours 

    I Just bought Adobe story but when I press sign in there appears an ST logo with a spinning @bar that has been on my screen for hours

    Can you please try the following?
    - first make sure that you have flash player up-to-date. You can get the latest version from https://get.adobe.com/flashplayer
      Now log into story wait for some time to see if this resolves your issue or not
    - If it doesn't then try opening private browsing/incognito mode of your browser and try logging into Story from there
      If you are able to login then you should try clearing cache and cookies of your browser

  • Iphone 6 is stuck on apple screen with loading bar. It has been like for 12 hours.

    My Iphone 6 is stuck on the opening apple screen with loading bar. It has been like this for 12 hours. I've tried resetting it by pressing the home and power button together but it keeps coming back to the same screen. What should I do?

    I've had the same problem but it's tuck on like the very last little bit and hasn't gone anywhere in 10-15 hours.

  • Plz plz anser plz ihave problem with my ipad ithink it has been hacked plz plz plz fix my ipad i`m vere poor i`m form iraq plz anser plz ok

    plz plz anser plz ihave problem with my ipad ithink it has been hacked plz plz plz fix my ipad i`m vere poor i`m form iraq plz anser plz ok
    plz
    my serial code for ipad is (DY*****VD2)
    plz fix my ipad
    <Edited by Host>

    Unless your iPad has been jailbroken, it can't be "hacked", and there are no known viruses or malware.
     Cheers, Tom

  • I have an iMac running Lion and W7 with boot camp . It has been operating flawlessly until I went to reboot into Mac tonight. Screen went black, and system is unresponsive. I've tried force quitting and turning power off. Hard drive starts but that's it..

    I have a 5 month old  iMac running Lion and W7 with the latest version of boot camp . It has been operating flawlessly until I went to reboot into Mac tonight. Screen went black, and system is unresponsive. I've tried force quitting and turning power off. Hard drive starts, there's a small amount of drive activity and that's it. 

    Hi Jane, your info may still be there, look in the Users folder at root of the drive, how many users are there there?
    It sounds like this may have happened...
    Return to default desktop, apparent "loss" of home directory, (it can happen spontaneously too)...
    http://docs.info.apple.com/article.html?artnum=107854

  • How do I consolidate a song into an album, each purchased separately, in my iTunes library? iMac OSX 10.8.5. iTunes Help has been no help.

    How do I consolidate a song into an album, each purchased separately, in my iTunes library? iMac OS X 10.8.5. iTunes Help has been no help.

    However, my troubleshooting issue is that I also want the songs in my concert playlists to go in order of how they were performed at the concerts.
    Give them a track number.
    Each time I number them within the playlists the song's number also changes within the Library Music list.
    And?  I'm not seeing the problem.
    However, I can not figure out how to make true copy. I've already tried dragging the song to my desktop, then dragging the new copy back into iTunes. I've even tried renaming the duplicate copy and dragging it into iTunes. Why won't my iTunes make an individual duplicate copy of a song?
    How do you have iTunes manage your music?  If you drag a song to the desktop it may just be moving the file to the desktop.
    Command+R to reveal the file in Finder.  Command+D to duplicate the file in Finder. Drag the duplicate to iTunes to add the second copy.  Not that I totally understand where the issues lie and feel this is likely not the best remedy...

  • I'm trying to access an uncompleted app. on a gov't website using Safari 5.1. I receive a message saying the browser is incompatible with the website. It has been suggested that use Safari 5.0 instead. Must I delete 5.1 first, or can I have both browsers

    I'm trying to access an uncompleted app. on a gov't website using Safari5.1 I receive a message saying the browser is incompatible. I have been advised to use Safari 5.0. Must I delete 5.1 or can I use both browsers on my Mac.

    As above, there is more to Safari than just the App, however I dont like the changes in 5.1, so restored the 5.0 version of just the App and it functions just like it used to
    It might not work for you, and it can just be deleted if it doesn't, not sure how easy it is without time machine
    go into Finder and Applications folder
    enter time machine (it will default to app folder)
    find a date that you had 5.0
    click to restore it (Do Not restore into original location, restore it to desktop to test it)
    When this has been done, run Safari from your desktop and see if it fixes your issue
    I have been using this version done like this for a couple of weeks and it is fine, I did copy it to the Application\Utitlities folder along with some other older software I have, then made this one the version on my dock
    If it doesn't make any difference just delete Safari.app from your desktop

  • Problem In F110  with status message " Payment run has been released "

    Dear Friends,
    We have an Strange issue in payment program...
    While executing the payment program they got below Status Messages
    Parameters have been entered
    Payment proposal has been created
    Payment proposal has been edited
    *Payment run has been released 13.05.08 15:42:58
    Program ends up without single payment....While trying to Delete the Proposal or Payment those selection are in grey color (Deactivated Mode) ...
    With same parametrs we have tried to run another payment run but there is no proposals selected...
    Question :
    1) How can I delete 1st Payment Run Proposal as well as Payment ID's
    Could you please Advise Neccessary actions which is required for solving the issue...
    Thanks in Advance
    Regards
    Suresh Polineni

    You can delete the payment run proposal in the following sequence
    1) first delete the output file
        Edit-Payments-Delete output
    2) delete the proposal file
         Edit-proposal -Delete
    3) if u want delete the parameters also in the similar way.
    for digging the problem why the payments are not happened, just check the exceptionals list then u can easily catch the error point.
    I hope it will provide some clue to clear your problems.
    Regards
    Madhav

  • There is a screen with an apple sign that has been frozen all night long. What do I do?

    There is a screen with an apple sign on my ipod touch that has been frozen all night long. What do I do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • Syncing my new 16 gig with my 2000 song library has been syncing for 24 hrs. is that normal? frustrated.

    slow syncing mt new 16 gig nano with my 2000 song library. it been running for 24 hrs and still not finished...is that normal?
    Frustrated and tried to restart the sync twice with the same results. help.

    He has a windows 7 computer.. i cant imagine its "too much of a load" for the computer to handle.
    But aside from that - thats WAYYY too long. I can sync 10,000 songs in under an hour.
    Try restarting your computer, maybe even your ipod. It sounds stupid, but something like that sometimes fixes things .
    Good luck!

  • IMac 27" AMD Radeon HD 6970M 2048 MB - Video Problems

    I just got a brand new iMac 27" and am having issues with my video.  The last iMac I bought had video issues, and a couple months after owning it, Apple/AMD fixed the driver issue and it worked fine.   However, this video issue happens within 5 minutes of each time I start the machine.  Here is a screen shot - check out the upper menu distortion and the lower menu.
    Anyway, is this something I should try and live with until Apple sends out an update - or do I need to return this Mac?
    Thanks - John-Paul

    After positng my comment I saw that others were having some of the same issues.  They said that the problems start when a flash video is played - or watched over the web.  Sure enough, that starts the issue.
    Apple says they are aware of the proplem and will have it fixed in 10.7.1 - which should be soon.  So getting a new iMac will not help.  I guess I need to treat my iMac the same as my iPad in the meantime and stay away from Flash. 
    Adobe and Apple need to kiss and make up.  Their customers are suffering over the battle.

  • HT1338 I have a Mac iBook late 2007 w/ 10.7.5 which has a simular iMac problem with 'wake from sleep' that has be resolved. However, I cannot find an MacBook solution to my problem. Any ideas?

    The abstract says it all. I close the cover of my MacBook and when I reopen it - the computer fails to attempt to connect to the last known wifi hotspot I was connected to or search for a known connection. I have to manually connect wifi to my home computer since upgrading at some point in the 10.7.x releases. The problem is described in the support for the iMac as having been resolved successfully, but I am interest in knowing if anyone else has seen and resolved this problem on a MacBook?

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.

Maybe you are looking for

  • One GL account and different COGS acct..

    Hi, I have this scenario where, Item : Lipstick GL account : set by Item Group We know that we can define 1 item with 1 item group. In this case, when our client post a delivery, they will send an amount of 10 lipsticks and amount of 2 for tester. Th

  • FME Runtime Library Error: flvmuxoutpin.cpp

    I am trying to publish a stream from a USB webcam. I get the following error when I press the "Start" button. Assertion failed! Program: FlashMediaEncoder.exe File:.\flvmuxoutpin.cpp Line: 1044 Expression: stop_reftime >= start_reftime For informatio

  • Help with EventListeners

    ok can someone tell me what I can do to fix this. here is my code package game; import javax.swing.*; import java.awt.*; import java.awt.event.*; public class GameFrame extends JFrame implements EventListener { public int plastic = 75; public int met

  • ChaRM - possible to have 2 different system landscapes in one project?

    Hi, can anyone tell me if it is possible to have 2 different system landscapes in one project. One landscape for developing and testing the Change Requests and another one for developing and testing the Bugfixes. Thanks, Martin

  • Quality on latest production models??

    Is there any concensus as to the whine and / or build quality on the latest production runs for the MB??? Thanks