Problem In F110 with status message " Payment run has been released "

Dear Friends,
We have an Strange issue in payment program...
While executing the payment program they got below Status Messages
Parameters have been entered
Payment proposal has been created
Payment proposal has been edited
*Payment run has been released 13.05.08 15:42:58
Program ends up without single payment....While trying to Delete the Proposal or Payment those selection are in grey color (Deactivated Mode) ...
With same parametrs we have tried to run another payment run but there is no proposals selected...
Question :
1) How can I delete 1st Payment Run Proposal as well as Payment ID's
Could you please Advise Neccessary actions which is required for solving the issue...
Thanks in Advance
Regards
Suresh Polineni

You can delete the payment run proposal in the following sequence
1) first delete the output file
Edit-Payments-Delete output
2) delete the proposal file
Edit-proposal -Delete
3) if u want delete the parameters also in the similar way.
for digging the problem why the payments are not happened, just check the exceptionals list then u can easily catch the error point.
I hope it will provide some clue to clear your problems.
Regards
Madhav

Similar Messages

F110 - Payment Run has been released error

Hi,
When we are executing payment run F110, after parameter entered & payment proposal is created it gives an message payment run has been released without
payment proposal edited & payment run carried out.
pl. help me in this regard.
thank u
regards
santosh

hi Chenu,
thanks for reponse immediately, can u kindly tell in detail why it will go to released state and how to overcome this problem, it happen occassionally not regularly.
thank u
regards
santosh

Payment run has been cancelled F110

Hi Experts,
Would like to ask possible reasons the following status is displayed in F110.
"Parameters have been entered
Payment proposal has been created
Payment proposal has been edited
Payment run has been cancelled
Posting orders: (X-1) generated, (X) completed."
Why does posting/payment were still created even if it is stated that "Payment run has been cancelled". What are possible reasons the payment run was cancelled.
Thank you very much in advance.

Hi,
With reference to the belowstatus which you have provided,
"Parameters have been entered
Payment proposal has been created
Payment proposal has been edited
Payment run has been cancelled
Posting orders: (X-1) generated, (X) completed."
Once you edited the Payment Proposal, then sytem displays a message Payment proposal has been edited
After that only you have cancelled the Payment Proposal, then sytem displays a message Payment run has been cancelled
Once you cancelled the Payment run system won't generate any posting orders.
Please try to replicate the same once again, you won't get this again.
Thanks
Chandra

F110 Payment run stopped, status Payment run has been carried out.

Hi experts,
I have searched in this forum but didn't find suitable scenario.
I have run automatic payment after the proposal created.
Somehow the payment run status stopped at "Payment run has been carried out".
Then I check the payment run log:
Job started
Step 001 started (program SAPF110S, variant &0000000007737, user name xxxxxx)
Log for payment run for payment on xx.xx.2009, identification XXxxx
System error occurred during blocking attempt; payment run stopped
... the execution of the payment program is terminated
End of log
Job finished
I thought no accounting document has been posted.
Is it the right way if I re-run the program SAPF110S with its variant?
What is the possible impact.
Kindly advise.
regards,
rob

Hi,
Yes there might be no accounting document has been posted because even though the payment run has been carried out but parameters you have mentioned might not been selected because of many reasons.
Please go to EDIT - Payment -
Payment list and exception list.......
Please check if any entry is there in payment list if it is than some doc has been posted.
Rest will go to EXCEPTION list.... will show you the exact errors.
Please check the same in the proposal run first... it seems that PROPOSAL run in not only correct.
See the error and correct it.

F110 APP run - Payment run has been scheduled, but job was not released

Dear Friends,
We have made payment parameters, payment proposal, edit payment proposal and it was working fine upto that stage.
Parameters have been entered
Payment proposal has been created
Payment proposal has been edited
But when we selected payment run, immediately it showed the below status:
Payment run has been scheduled 17.01.08 12:59:55
Job was not released
Also I'm not able to delete the Payment run made, fields are in disabled mode.
Please guide me how to resolve this issue.
Thanks in advance for your help.
Regards,
Dwarak.

Dear Supriya,
Thanks a lot for your immediate response.
Still the same problem is existing even after one and half hours.
ie.,
Payment run has been scheduled 17.01.08 12:59:55
Job was not released
Could you please let me know which Tcode we have to go to release this inorder to solve this issue.
As it is in the production client, it would be really helpful if you could let me know the details at the earliest.
Thanks again.
Regards,
Dwarak.

Hi, my iPhone was stolen and now i can't receive messages from people with iPhones. What do i do to fix this problem, and get my old messages? This has been a problem for 3 weeks!

Hi, my iPhone was stolen and now i can't receive messages from people with iPhones. What do i do to fix this problem, and get my old messages? This has been a problem for 3 weeks!

This won't get your old messages back but will help with new ones: https://selfsolve.apple.com/deregister-imessage

Payment run has been cancelled

Hi Experts,
We have a problem in Payment Run. In proposal there are 154 line items are ready for payment (status is Green). But once we did the payment run the status is Posting orders: 109 generated, 109 completed and Payment run has been cancelled.
There are 154 vendors in this payment run. But the payment has been done only for first 109 vendors and the remaining vendors are not included in the payment.
Please suggest what could be the reason.
Regards,
Havina

Hi Havina,
The reasons could be galore.
The open invoice items may not be due or overdue for payment.
Depending on the next run date, APP might have not picked the open items for payment.
The open item might have been blocked for payment.
The vendor master record itself might have a payment block.
Depending on the case to case you need to analyse.
Hope this helps you....
Regards,
Sreekanth....

Nokia Messaging 1.2 has been released

Here's the latest news from the Nokia Messaging team:
Nokia Messaging 1.2 became available on September 5th, 2009. Please go to http://email.nokia.com to download the latest version.
Here are the highlights of this release:
-HTML viewing enhancements
-Additional language support
-Additional device support
-Product improvements
-New client features and settings
-Automatic client updates
-Server enhancements
Message Edited by jeremiahn on 09-Sep-2009 03:55 PM

I have installed the newest version (10.1.0.13) on my N97 (fw. v11) in the beginning of this week. I use a Google Apps email account. My first impression was positive but after few days of using it I bumped into several very irritating problems / bugs:
The display of HTML messages is completely useless for me. Most emails appear with very tiny font. Of course I can zoom in, but then no wrapping / fit-to-screen is performed on the text which means that I have to scroll each single line horizontally. It drives me crazy!
I configured the client to synchronize once per hour. I noticed that synchronization takes very, very long time – sometimes even 20 minutes! Also when I synchronize manually it takes often minutes to synchronize.
Sometimes after viewing HTML emails the client does not disconnect – the data connection is left open forever. I have to close it manually.
Emails arrive regularly with large delay.
The HTML emails (from the same newsletter sender) appear sometimes with and sometimes without images (only the broken link icon is show). There is no option like download images.
The synchronization icon on top of the screen in portrait mode is truncated / not visible.
Each time I encountered these problems I run Profimail to find out that there was no problem with Gmail or the emails!
Further I have some general UI design / usability remarks:
Why waste the screen with these large black buttons on the right hand site? Especially now with HTML display it would be much better to see emails full screen
There is no mailbox overview screen like in the S60 3 version (on my old E71) so emails arriving in secondary mailboxes are easily unnoticed
Why not make a synchronize button somewhere (for example re-use the sync icon on the top). Now each time I want to sync, I have to go to the option menu, scroll down, select send/receive. Very, very unhandy!
Message Edited by erick401 on 11-Sep-2009 07:33 AM

Running F110 with message "Proposal has been released 07/22/10 06:42:33"

Dear experts,
When I made proposal through F110, it shows me "Parameters have been entered", then after setting the related parameters, I tried to run Proposal with check on "Start immediately", then the message "Proposal has been released 07/22/10 06:42:33" appears, I also check SM37, but I can not get the spool list.
What could be the reason?
Thank you!

In the first tab of your F110 screen, you'll get the status of your processing. It will update for each event. Check if you are getting things like the following.
Parameters have been entered
Payment proposal has been created
Payment proposal has been edited
Payment run has been carried out
Posting orders: 1 generated, 1 completed
If you are not getting any of the above, you can check that step and analyse the log.
Since you are getting as released, i think the proposal run has not carried out.
Ravi.

F110 Payment run have been cancelled

Hi all expert,
When i want to do payment to vendor, the proposal is created.
But show message 'Payment run have been cancelld'.
So at this moment, i can't do anything to do the payment.
I can't make another proposal and payment run for the vendor.
Some one please help me.
Thanks

This is my payment job log,
08.10.2008 17:10:18 Job started
08.10.2008 17:10:18 Step 001 started (program SAPF110S, variant 0000000010756, user ID: ACC-USER)
08.10.2008 17:10:18 Log for payment run for payment on 10.10.2008, identification B1010
08.10.2008 17:10:27 ABAP/4 processor: DBIF_RSQL_INVALID_REQUEST 00 671 A
08.10.2008 17:10:27 Job cancelled 00 518 A
Can everyone explain to me why my payment run will cancelled with this error?
Thanks

The SIM card In my iPhone 5 has been giving me occasional messages that there has been a SIM Failure, there is NO SIM, or that there is an INVALID SIM. Until today, I was able to restart it with no problem and the SIM card would start up.

The SIM card In my iPhone 5 has been giving me occasional messages that there has been a SIM Failure, there is NO SIM, or that there is an INVALID SIM. Until today, I was able to restart it with no problem and the SIM card would start up. This afternoon the NO SIM message came up and I cannot fix it. What is my next step? I am traveling in Canada now and it is not convenient to come back to the States just to get a SIM card.
Thanks,
Lou

Hi,
Thanks for getting back to me. How can I initiate Verizon sending me a new SIM card? I will be here long enough to receive it if they can send it to me.
I have been trying to call Verizon Wireless, but they won’t take my call from my Skype account and I don’t have my phone.
Thanks again,
Lou

I have Lookout 6.5 running with Windows 7, the process has been running for about 2 months with no problems, but today the Citadel stopped working! I am having a hard time getting it started again, need help!

I have Lookout 6.5 running with Windows 7, the process has been running for about 2 months with no problems, but today the Citadel stopped working!
How could this have happened and what can I do to get it running again?

Didnt realize there was a response, late getting back to you.
Save your process files outside of the NI progam directory (you should have external backups already right ). THey should not be deleted.
Any customizations to the lookout.ini and lookout.sec file may be lost.
Mike
Forshock - Consult.Develop.Solve.

I am using XP-SP3 & Firfox. When installing Flash Player Software i get a message: "This Publisher has been blocked from running software on this machine". How do i unblock it - HELP.

I am using XP-SP3 & Firefox. When installing Flash Player Software i get a message: "This Publisher has been blocked from running software on this machine". How do i unblock it - HELP.

Hi,
This is a security setting on your system that is resulting in this behaviour, not Flash Player installer itself, or anything with the installer. There are many Google search results on this. The first hit I got, was the following from the Microsoft forums:
To unblock a software publisher:
1. In Internet Explorer, click the Tools button, and then click Internet Options.
2. Go to the Content tab, Look under the Certificates section.
3. Click on Publishers button.
4. Select the Untrusted Publishers tab.
5. Select the Publisher you wish to unblock and click the Remove button.
Maria

Recently my IMac with osx 10.4.11 has been running extremely slow. To the point where I have tried restarting.I have run Sophos antivirus software and have found nothing. Any suggestions?

Recently my IMac with osx 10.4.11 has been running extremely slow. It takes forever for Safari to switch screens. You can hear the computer constantly working. To the point where I have tried restarting.I have run Sophos antivirus software and have found nothing. Any suggestions?

First remove the antivirus software, it's possible that could be part of your problem! Slow Mac's can be caused by many different issues, including failing HD's, a HD that is too full (OS X really likes to have about 10-15% of the HD available), insufficient RAM, etc.. To troubleshoot your problem I'd recommend looking over 25 Ways to Speed Up Your Mac.

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

Problem In F110 with status message " Payment run has been released "

Similar Messages

Maybe you are looking for