Turn off zero-copy IO on connection level

Hi
Is there any possibility to turn off zero-copy IO protocol on connection level as it is with JDBC?
JDBC Doc.: http://docs.oracle.com/cd/E11882_01/java.112/e16548/oralob.htm#CHDFEBJD
Rationale:
We are getting "ORA-12582: TNS:invalid operation" intermittently while reading CLOBs stored as SECUREFILEs -> Known issue: 1193913.1 - Ora-12582 using Securefile Lob
The MOS Note suggests to set "_use_zero_copy_io=FALSE " on instance level. We would much rather prefer to disable the protocol just on the .NET client without affecting the entire environment.
Thanks,
Beat
Database: Oracle 11.2.0.3
OS: Windows 2008 R2 Server
Client: ODP.NET 11.2.0.3

now I have this and it still doesn't work.
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Touchpad" "SendCoreEvents"
InputDevice "Keyboard1" "CoreKeyboard"
Option "OffTime" "1"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "DontZap" "false"
EndSection

Similar Messages

  • HT1338 when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 70

    when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 709e, connecter wirelessly

    I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
    HP Photosmart Premium Fax All in One - C410a
    I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print.  Since then I've been able to resolve my specific problem.
    I
    1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found), 
    2. grabbed the software/driver update from Aug, 2010,
    3. installed the Aug, 2010 update, and my problems seem to have been fixed.
    This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&...

  • I tried updating my ipod, and then it turned off, and then just said connect to itunes, and when i did, it said i had to restore it. so, i restored it, and it did nothing and still said connect to itunes. help?

    i tried updating my ipod, and then it turned off, and then just said connect to itunes, and when i did, it said i had to restore it. so, i restored it, and it did nothing and still said connect to itunes. help?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     
    or
    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Turning off zero elimination

    Hi,
      A quick and easy question.  Can I turn off zero elimination if I have compressed many requests with zero elimination on? and what are the impacts
    thanks

    You've answered your own question I think.  From a technical standpoint, no problem in turning it off. The reason you sight, business need to see the '0' records is exactly why you would NOT use zero elimination. 
    The degree of space saving and performance varies from application to application, and probably to a degree, from customer to customer.  Some appls, by there nature, frequently use off setting transactions that zero out, or generate zero trans, and other appls seldom do. I have some appls where zero elim reduced the E fact table by 50% and others where it had neglible impact.
    I wouldn't worry about turning it off at all if your business requirements dictate that the 0 records be there.
    Pizzaman

  • My classic is frozen. cannot get it to repond or turn off. I have tried connecting to the computer as well, nothing works

    my classic is frozen. cannot get it to repond or turn off. I have tried connecting to the computer as well, nothing works

    Hello laurijreimer
    If you are having issues with your iPod, try restarting it by holding the menu and the center button until the Apple Logo comes up. Check out the article below for more info.
    iPod Troubleshooting Assistants
    http://www.apple.com/support/ipod/five_rs/
    Regards,
    -Norm G. 

  • HT1430 IPAD IS FROZEN.  GAME I WAS PLAYING SHOWS SMALL IN CENTER OF SCREEN.  DOES NOT TURN OFF.  SIRI SAYS NOT CONNECTED TO INTERNET BUT I CANNOT GET IPAD TO DO ANYTHING SO THAT I CAN CORRECT.

    ipad is frozen.  game i was playing shows small in center of screen.  does not turn off.  siri says not connected to internet, but i cannot get ipad to do anything...frozen.

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • HT-CT80 turns off every 15 minutes when connected to a bluetooth device

    Hi, My HT-CT80 turns off every 15 minutes when connected to any bluetooth device. Is that the auto standby feature? If its connected to a bluetooth device, I guess it is receiving input? Any suggestions please?

    Hi sumitr,
    You may try resetting your device.
    Kindly follow the steps below.
    For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
    Thanks,
    >Joffrey
    If my post answers your question, please mark it as "Accept as Solution"

  • Turning off "borderless copy" on MX922

    How can I turn off "borderless copy" on the MX922 photo scan settings? I'm trying to scan polaroids (Image Spectra and Polaroid 300 film).
    Thanks!

    Hi,
    Please try only send attachments to the printer with a blank body.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I prevent my iPhone 4 from turning off randomly while charging and connected to MacBook Air?

    My iPhone 4 randomly powers down while charging via USB to my MacBook Air.  This has happened twice while I was sleeping and always makes for a great morning.  Here's what happens:
    I keep my iPhone 4 ON and connect it to my MacBook Air - battery charge level is typically around  20%
    I keep my MacBook Air connected to AC power
    I go to sleep
    I wake up without my alarm and find my iPhone is now OFF
    I turn it on and find the charge level to be at 100%
    It seems to only happen when connected to the MacBook Air.  Has anyone else seen this or have a potential remedy to this issue?

    Try the power related troubleshooting suggestions in this Apple article -> iPhone: Hardware troubleshooting
    If that doesn't work, have a Genius take a look at it.

  • Cannot turn off Homesharing to AppleTV: IPv6 connections remain

    I CANNOT prevent my AppleTV from sharing my iTunes Library even though ALL sharing on my computer (including "home sharing" in iTunes) is turned OFF
    There are several discussions about Homesharing not working if the AppleTV has gone asleep for over 24 hours.
    In "most cases", restarting the AppleTV and/or restarting iTunes will solve this problem.  On occasion, I have had to reboot the computer that was suppose to be sharing.
    I have two computers.  One with Homesharing (system 1) on and the other with Homesharing (and all sharing) turned off. (system 2)
    When I restart the AppleTV so that it will see the iTunes library for system 1, it will -also- pick up the iTunes library for system 2.
    The Bonjour Sleep Proxy is somehow involved in this.  It keeps the ARP table populated with IP addresses of systems that have gone to sleep.  (AppleTV)   An Airport Extreme will run the Bonjour Sleep Proxy.  I have found that the AEX will cause as many as 60 DAAP sockets (both v4 and v6) to be open on my computers -- if iTunes is running.  When the AppleTV wakes up, restarting it seems to clear these extraneous DAAP sockets and ONLY ipv6 sockets remain open on system 2.
    On system 1 (Homesharing enabled) has 3 ipv4 sockets open for DAAP.
    This appears to mean that when Homesharing is turned off it is ignored by IPv6.
    On further investigation, I note that link local addresses are being used between the AppleTV and system 2.
    tcp6       0      0  johns-macbook-pr.daap  great-room-apple.54552 ESTABLISHED
    tcp6       0      0  johns-macbook-pr.daap  great-room-apple.54551 ESTABLISHED
    tcp6       0      0  johns-macbook-pr.daap  great-room-apple.54550 ESTABLISHED
    The only problem is that the MAC address these connections are made over are to the Airport Extreme
    great-room-apple-tv.local               90:72:40:c:8c:9f     en1 22h54m16s S   
    fe80::cbc:15ab:bdd7:98b7%en1    90:72:40:c:8c:9f     en1 22h54m0s  S   
    ? (10.0.1.1) at 90:72:40:c:8c:9f on en1 ifscope [ethernet]
    Of course, this is a side-effect of using Bonjour Sleep Proxy.
    When the appleTV is asked to list the contents of the iTunes Library on System 2, the MAC address is corrected to the Apple TV.
    But the problem remains that HomeSharing for system 2 is OFF.  How did this information get into the Apple TV and why does System 2 even answer?
    Attempting to turn off IPv6 on system 2 has resulted in "System Preferences" freezing and being "force quit"
    (I set up IPV6 for manual configuration but did not enter any address.  A warning message came up saying an address was required but System Preferences no longer responded.)
    Properly entering "::" for all zeros worked.  But that still does not disable "link-local" addresses.  So restarting the AppleTV -STILL- shows system 2 iTunes Library being available over IPv6 sockets.
    Check out these threads:
    Apple TV homesharing keeps dropping out ...
    Numerous ATV DAAP ports to MacBook Pro
    DHCP conflicts between AppleTV and Airport Extreme repeater

    Have you recently installed LittleSnitch or some other network "guardian"?
    There have been a number of these messages recently, though generally with other apps.
    http://discussions.apple.com/thread.jspa?threadID=2087017&start=0&tstart=0
    Lots More

  • I was downloading the update on my iphone4 and then it turned off and told me to connect to itunes and now it wants me to recover it but i dont want to lose my stuff

    I was in school earlier today and noticed that my iphone 4 needed an update, so  started the update then after like 2 mintues my phone turns off and when i tried to turn it back on it told me to connect to itunes. Now im connected and it tells me i must restore my phone...And i really dont want to lose my pictures and stuff like that so someone please tell me what i can do...

    Sorry, you have no choice but to restore your phone now. If your data was not backed up before you attempted to update, it is gone.
    Next time, backup before you attempt to update.

  • My 4th gen ipod touch has crashed, just displaying a dark blue screen.  It won't turn off or do anything.  Connecting it to the laptop does nothing either.  Is this common and any ideas??

    My 4th Gen ipod touch has crashed, just displaying a bark blue screen.  It will not turn off or respond to any buttons being pressed or held for a number of minutes.  Connecting to the laptop does not help either.  Has anyone had this happen on their i touch or have a solution??
    Thanks

    If not successful, try the remaining actions of:
    iOS: Not responding or does not turn on

  • Personal File Sharing Turns off after an attempt to connect from other comp

    I have personal file sharing turned on on my MacBook and when I attempt to connect to it from my iMac I get a typical logon windows and extended delay and then the message that the Server Connection was Interrupted. When I check Personal File Sharing on the MacBook it has been turned off even though I have locked the settings.
    The problem exist whether I use my local Wireless LAN (Apple-N) or an ethernet connection. In both cases the MacBook the ethernet connection is with the a port on the Apple N wireless LAN

    It may be solved for you, but I just discovered that since upgrading to 10.4.11 I can no longer connect to any of my other Macs. When I click on network NOTHING shows up in the Finder.
    While I'm happy to grab random code posted by an unknown person and stick it in my system, I shouldn't have to. Clearly Whatever the update did to your Mac it did to my MacBook as well and most likely others. If this is the official fix for the problem, Apple needs to acknowledge it and offer a link to the file rather than relying on fix-it forums to solve their problems.
    Apple seriously needs to test these updates a little more thoroughly before they make them available. I KNOW you are supposed to back everything up before you do it, yada, yada, yada ... but Apple has basically made the Software update feature an automatic function as if it is the best thing for your computer ... clearly that is not always the case.

  • Why doesn't Wi-Fi turn OFF when USB Ethernet is connected?

    When I get into the office, I connect my MacBook Air (2011/Lion) via USB Ethernet (we have Wi-Fi too).
    When connected through USB Ethernet, my Wi-Fi stays connected as well.
    Is it possible to have Wi-Fi turn off automatically when connected via USB Ethernet?

    You can configure your Network System Preferences so that your Ethernet interface has preference over wifi.  It will not automatically turn off wifi, but it will use the Ethernet if it's plugged in.

  • How can i turn off my laptop display when connected to an external monitor

    Hi,
    How can I make my laptop monitor turn off when connected to the 27 inch cinema disply? When connected to the Cinema display and the Laptop is open,the display on the laptop shows my wallpaper screen.  Is there a way to have the laptop display turn off?
    Thanks

    I'm having the same issues. Using the following command in terminal does not work for me. After rebooting the laptop screen still comes on.
    sudo nvram boot-args="iog=0x0"

Maybe you are looking for

  • Same javaFX jar, many applet instances in the same page

    Hi all I want to know if it is possible to embed a javaFX in a JSP/HTML page many times without instantiating many times the Java Console panel, for example, I have this code: <script>              function loadFX(){                                 l

  • Original iphone used for itunes and now wont sync bc of no sim

    HELP PLEASE.  I had been using this iphone for itunes and decided to get all the pics off so did a restore.  Now it won't let me do anything to it because there is no SIM card in it before.  I could always hook it up and sync before but this time I d

  • Service Tax program

    Hi As per service tax rules, service tax needs to be paid to government only when th amount is received from customer. So at the time of booking invoice, credit must go to service tax interim account and not service tax payable account. Similarly in

  • ALE_Configuration_doubt

    Hi I am trying to configure ALE settings for a new partner. I created a new message type and attached the mssg type to the newly created IDOC type. Now, I want to set the patrtner settings in WE20. Can you please provide me the steps that one require

  • Database Desgin Documentation

    Hi, Can you please tell me where I can find any documentation and/or on-line course for database design for oracle designers? Cheers KD