Turn tv off while using Appletv

I have Appletv connected via my reciever. So no need to have my tv on the entire time i want to listen to music via Appletv. So why does appletv disconnect or turn off when i turn off my tv? Has nothing to do with it? I don't want to use up my plasma just to view the screen saver for hours on end.

Almost seems like when I turn off my Plasma, the hdmi cable sends a signal to AppleTv to turn itself off. While music is going through Receiver.

Similar Messages

Nokia 700 GPS turns itself off (while using Endomo...

I have a Nokia 700 and I'm using Endomondo app which requires GPS.
Why does the GPS turn itself off? I have experienced it couple of times. After GPS turned off I checked battery status and it was 40%, also time after GPS turns off differs almost every time.
I have used Endomondo on Nokia 5800 and it worked well.
How can I fix this?
Please help!!

@ceres
Don't use this application myself but not noticed such issue upon 700, have you tried installing http://store.ovi.com/content/165671 and run this in the background and see if it still happens.
Happy to have helped forum with a Support Ratio = 42.5

HT201412 my ipad3 does not turn on after it went off while using it, anyone with same experience and have it resolve already?

my Ipad 3 will not turn-on after it went off while using it, anyone with the same experience and have it resolve?

Is the battery charged?
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

How do I turn music completely off while using maps

How do I turn the music off while using apps for directions. Every time I use maps to navigate somewhere I get music that comes on automatically anyone know how to turn this off?

Just disabling firewire at the system settings not physically shuts off power to the firewire port. And since you feel by yourself facing a hardware defect, I would recommend taking the computer to a repair center.
Maybe they are able (I'm absolutely not sure about, but sometimes hope dies at last to remove an internal cable and so shut down the firewire ports without replacing any expensive parts.

I was using ios 7.0.3 nd it was working very nice but before some days i got an update 7.0.4 nd i updated and now my iphone is getting switch off while using nd restarts..???? what to do

i was using ios 7.0.3 nd it was working very nice but before some days i got an update 7.0.4 nd i updated and now my iphone is getting switch off while using nd restarts..???? what to do

Sorry you cannot go back to previous version once your are updated to the latest iOS version.
Apple prevents downgrading your phone.

HDMI Sync Turns on/off While iPad 3rd/4th Gen is Sleeping

I am using some 3rd party hardware to monitor the sync output of an iPad's HDMI output using the 30-pin to HDMI adapter so when the iPad is asleep a TV shows one thing and when the iPad wakes up the TV will automatically switch to the iPad.
The first issue I had was that while the iPad is plugged in, the HDMI output never turns off. While it would be EXTREMELY nice if the HDMI output did turn off while the iPad is plugged in, I was able to work around this with a mechanical 110VAC timer that charges the iPad at night and removes power during the day.
The problem I am now having is, while the iPad is asleep and not powered, the HDMI sync randomly turns on for a few seconds and then turns back off. This provides some undesirable results because the TV will momentarily switch to a black screen and then back to the digital signage that it's supposed to show.
I've tried turning off all updates and push notifications and it still is happening. I've also tried my iPad 4th gen thinking that the Lightning connector might make a difference and it still does the same thing. Any ideas would be greatly appreciated.
Thank you!

UPDATE: It seems that turning the WiFi off fixes the problem. Is there any chance an iOS update might include a feature to turn off the HDMI output when the iPad's screen turns off?

My MacBook Pro just turned itself off while installing Windows 7. It has now got a black screen with a white flashing bar in the top left corner...what can I do?

I was just installing windows 7 onto my MacBook Pro. I selected to have 200GB for Windows and the rest leave for Mac.
I clicked install and the bar filled up as it should do. However, once the install had completed, my MacBook turned itself off. I assumed this was normal. Now, my MacBook has a black screen with a white flashing underscore in the top left corner.
What is wrong and what should I do?

Hold down the Option key when starting up then on the sceen that comes up select Mac OS X to boot from.
The Win 7 install didn't go well and is hung in some way. You should use boot camp assistant to remove the win partition and start over.
Make sure you are using a Retail version of Win 7. A Branded OEM version, like ones from Dell and HP, will NOT work to install Windows 7 on your Mac.

"Maximum Render Quality" Better to turn it OFF when using CUDA MPE?

http://crookedpathfilms.com/blog/201...port-settings/
"IMPORTANT NOTE ABOUT RENDERING TIME: Make sure you do not select “Use Maximum Render Quality” if you are utilizing the accelerated GPU graphics (Mercury Playback Engine). This will not improve your video and will only slow down the rendering speed by as much as 4 times!"
http://blogs.adobe.com/premiereprotr...e-pro-cs5.html
"For export, scaling with CUDA is always at maximum quality, regardless of quality settings. (This only applies to scaling done on the GPU.) Maximum Render Quality can still make a difference with CUDA-accelerated exports for any parts of the render that are processed on the CPU...
When rendering is done on the CPU with Maximum Render Quality enabled, processing is done in a linear color space (i.e., gamma = 1.0) at 32 bits per channel (bpc), which results in more realistic results, finer gradations in color, and better results for midtones. CUDA-accelerated processing is always performed in a 32-bpc linear color space. To have results match between CPU rendering and GPU rendering, enable Maximum Render Quality."
Here is what I got out of after reading those two sites:
I should turn it off for it's always ON (when CUDA MPE is used) regardless I check or uncheck it.Turning it ON only offloads the calculation to CPU (instead of GPU) hence slowing down the previewing and encoding performance.
So I guess I should have Maximum Render Quality setting turned OFF in both of squence settings and export settings.
However, David Knarr of Studio 1 Productions suggest otherwise:
http://www.studio1productions.com/Articles/PremiereCS5.htm
"When you startup Adobe Premiere CS5 and you don't have a certified video card (or one that is unlocked) the Mercury Playback Engine is in software rendering mode and by default the Maximum Render Quality mode (or MRQ) is to OFF.
(Maximum Render Quality mode will maximize the quality of motion in rendered clips and sequences. So when you select this option, the video will often render moving objects more sharply. Maximum Render Quality also maintains sharp detail when scaling from large formats to smaller formats, or from high-definition to standard-definition formats. For the highest quality exports you should always use the Maximum Render Quality mode.)
When you unlock Adobe Premiere CS5 so the Mercury Playback Engine can use almost any newer NVidia card (or if you are using a "certified" NVidia graphics card), the Mercury Playback Engine will be in the hardware rendering mode and the Maximum Render Quality mode will be turned ON.
Since the software mode is not set to maximum render quality, it can sometime render faster than the hardware render, but a a loss in qualitly. If you set the software to maximum render quality you will see that it is very, very slow compared to the hardware render.
Here is how to set the Maximum Render Quality.
1) Open up Premiere CS5
2) Click on Sequence at the top of the screen
3) Then select Sequence Settings
4) At the bottom of the window select Maximum Render Quality and click Okay
It is always best to be using the Maximum Render Quality mode,"
Now, I'm lost.

Okay, I am loosing it..... You are correct.
I am not sure what I was remembering, I could have sworn that when I loaded Premiere CS5 for the first time before I unlocked the video card, the Maximum Render Quality mode was NOT checked. Then when I unlocked the video card, the Maximum Render Quality mode was check to ON and I didn't set it to be On.
I just when back and uninstalled Premiere and re-installed it, to see what was going on and I was totally wrong.
Sorry for the mistake and I will be updating the article on my website in the next 15 min.
Also, I have written a small program to do the unlock automatically. The program is free and it works with the cards listed under the Automatic Mode.
If your video card isn't listen, just let me know what your card is and what you typed into the cuda cards file and I will add it to the program.
David Knarr
Studio 1 Productions

N73 turns itself off when using real tone

When i have an incomming call, and have a real tone selected, my phone rings for 3 rings then dumps and turns itself off. It works again when i turn it on but if i call it again it does the same thing. I have tried using a real tone from the phone and from the memory card and it does the same thing. This does not happen with a polyphonic tone. Any suggestions?
thanks

thank you for your advice. I have discovered that most tones work, but the odd one is still dumping the phone. I will just use the working ones now.
thanks again for your advice.
Lucie

Satellite 2430-S255 turns itself off while playing video clips

My Toshiba Notebook Satellite 2430-s255 turns itself off within 5 minutes whenever I play streaming video clips from web sites using Windows Media Player version 10.0. I uninstall version 10 and used version 9, but there was no difference. Computer has 512 meg memory and 10 gig of extra space on harddisk.
There is no problem when I play DVD using the same software.
Toshiba support has been telling me that cpu is working hard and it heats up to cause this problem. I used fan to circulate the air, but computer still turns itself off.
Can some one help.
Jyotsna

HI Jyotsna,
Any graphics activity will tend to make your notebook run hotter and will therefore need adequate cooling.
Check that your airways through the CPU heatsink are not clogged with dust and debris (lots of threads in this forum about it), and also make sure that there is sufficient air gap under your notebook to allow air to get in to the fan vents.
HTH

I was just using my iPod this morning. I turned it off after using it, but when i opened it in the afternoon, i couldn't connect to my wifi anymore. I tried resetting the network but it still didn't work. I wonder what is wrong with it?

My ipod 4th generation can't connect to my wifi. I was just using it this morning. I turned it off for awhile but when i opened it in the afternoon, it just won't connect to my wifi. My wifi is ok 'cause i am able to use my mac. I wonder what is wrong with it?

- Do other devices successfully connect using your network?
- Does the iPod successfully connect to other networks?
- Reset the iPod . Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points

Why isn't my mac smart enough not to turn itself off while downloading from the app store?

it's plugged in and everything.

Is it turning itself off or going to sleep? If it is turning itself off, you may have a shutdown time in System Preferences/Energy Saver that is over riding and shutting it down.
In my personal experience, there are some activities that don't seem to register enough to keep the computer from sleeping/shutting down, so I set sleep to never until I'm done.

IPhone switches Off while using the Camera

For example:
I have 20%, 50% or 80% and i want to take a photo. (Problem is represented at all battery capacity levels)
I open the Camera App, take 2 or 3 photos and 1 panorama.
And then the iPhone abruptly turns OFF.
When i want to turn it on again, the "Low battery" is shown. Trying it again after 10 minutes, it turns ON and the battery capacity is the same as before.
Any ideas what the problem could be?
Sorry for that English!

To disable Zoom double-tap the screen with three fingers.
Go to Settings > General > Accessibility > Zoom and turn this OFF.

My ipad mini turns itself off while I'm using it ..Happened constantly through out the entire time I was using it...

My ipad mini turned itself of constantly while I'm using it ,at first I thought it was just a random thing but then It happened again several times after that .It has never done that before toady ,I was wondering if this problem has happened with anyone else .If so is there any solutions to solving this problem ??

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..

Imac spontaneously turning off while using iTunes?

Lately, every once in a while my iMac shuts itself down while inactively, listening to music from my library. Does anyone know what could be the course?

Specifically, I don't know the answer, but finding out the answer won't be hard.
We'll need a few specifics. You say your iMac shuts down while listening to music from your library. Is that the only time it happens? Is this when you're using iTunes, or some other application? What do you mean when your "iMac shuts itself down"? Does it shut down entirely, causing yout to reboot your computer? Could you describe exactly what happens before and after the "shut down"?

Turn tv off while using Appletv

Similar Messages

Maybe you are looking for