Turning on verbose in EJBC generated files

Hi All,
Is there a command line switch that can be used to set the __WL_verbose flag
to true in the ejbc generated files? I can see the flag in the generated
.java files, but cannot seem to find a way to set it to true.
byeeeeeeeeeeeeeeee

java weblogic.ejbc -keepgenerated
Andy Marks wrote:
Hi All,
Is there a command line switch that can be used to set the __WL_verbose flag
to true in the ejbc generated files? I can see the flag in the generated
.java files, but cannot seem to find a way to set it to true.
byeeeeeeeeeeeeeeee

Similar Messages

NoSuchMethodError in findMethodInfo(__methodSig) in ejbc generated code

Hi All,
Happy new year!
Does anyone know when weblogic.ejbc calls "findMethodInfo(__methodSig)" in its
generated "*HomeImpl.java" classes?
This is causing my code to end in a NoSuchMethodError exception.
The generated code for the included beanManaged.AccountHome does not include this
call, while the code generated for my code does.
Can anyone tell me why?
Anyone from the Weblogic people?
Thanks,
Boogie

boogie wrote:
Rob Woollen <[email protected]> wrote:
boogie wrote:
Thanks for the reply, Rob.
So the "findMethodInfo()" is caused by the presence of multiple interfacesat
compile time.It's probably caused because ejbc generates code for version 1 of your
interface
but you then deploy a jar that loads version 2 of your interface.
<boogie>
i'm using the same interface. however, at compile time, the interface is both
on the classpath (since i've just compiled it) and in the pre-ejbc jar file (which
i'm passing to weblogic.ejbc).If it's in the classpath and in the ejb.jar, then ejbc finds the version in the classpath and
generates code against it.
from what you've said, i gather this is why ejbc
puts in a "findMethodInfo()" call in the --HomeImpl.java files that it generates.
</boogie>
<boogie>
SCENARIO 1: I use my build script.
condition: the home interface is found and compiled, the EJB classes placed in
a temporary jar file, then passed to EJBC (with -keepgenerated flag)
output: the generated MyBeanHomeImpl.java calls "findMethodInfo()" and i get NoSuchMethodError
exception at runtime
If the version in the classpath and the version in the jar file were exactly the same, then ejbc
would run fine. It fails when they are different. ejbc is generating code for a method that
appears in the version that it is loading.
-- Rob
>
SCENARIO 2: I manually build.
condition: i jar the files manually, pass the jar to weblogic.ejbc (with -keepgenerated)
without specifying a classpath; the current classpath doesn't include the compiled
home interface;
output: the generated MyBeanHomeImpl.java doesn't call "findMethodInfo()", code
runs as expected
SO, i need to build with scenario 1 AND still make it run at runtime. i don't
have multiple copies of the EJB classes/interfaces at deployed or in the classpath
runtime, but i keep getting the NoSuchMethodError exception because of the "findMethodInfo()"
call that weblogic.ejbc insists on making. what can I do to solve this problem?
thanks!
really appreciate the help!
</boogie>
-- Rob
Rob Woollen <[email protected]> wrote:
There's some sort of mis-match between the interfaces that ejbc is
finding
(and
generating code for) and the interfaces being deployed.
I would check your classpath and remove all occurrences of the homeinterface
class. It should only be in the jar file. Then re-run weblogic.ejbc
-- Rob
Boogie wrote:
Hi All,
Happy new year!
Does anyone know when weblogic.ejbc calls "findMethodInfo(__methodSig)"in its
generated "*HomeImpl.java" classes?
This is causing my code to end in a NoSuchMethodError exception.
The generated code for the included beanManaged.AccountHome does
not
include this
call, while the code generated for my code does.
Can anyone tell me why?
Anyone from the Weblogic people?
Thanks,
Boogie

Generated file combining LOF and LOR

Sorry if this is something I should have been able to work out for myself – it would be really handy to generate a document that shows me figure captions (a LOF including :figcap styles) and a list of graphics (a LOR including imported graphics)
The aim is to have a single list I can hand over to people who need to know which file (or files) is referenced for each illustration. I've managed to make one with copy/paste, a text editor and a spreadsheet, but was wondering whether there might be a niftier solution.
N

You could generate a LOP that is built from just the paragraphs used in the LOF and LOR .
It turns that this actually works, with a couple of caveats:
Frame doesn't list the generated paragraph types, from generated files, in the LOP setup dialog. You need to add the generated para names (such as Heading1TOC or Level1IX) to the Para Catalog of a non-generated file.
You probably have to run Update Book twice to capture in the LOP any changes to the other generated files.

Error deploying ejb on generated files

Hi,
I am trying to deploy an ear with several ejbs in it, however the deployment fails since there are errors on the generated files for an specific. The error in the logs is:
[07/Apr/2006:09:47:18] SEVERE ( 6716): DPL5102: EJBC - rmic compilation failed
[07/Apr/2006:09:47:18] WARNING ( 6716): DPL5035:Error while running ejbc
com.iplanet.ias.deployment.backend.IASDeploymentException: Fatal Error from EJB Compiler -- -- rmic compilation failed: com.iplanet.ias.ejb.codegen.JavaCompilerException: RMI compiler returned an error: C:\Sun\SunONE\AppServer7\domains\domain1\server1\generated\ejb\j2ee-apps\coretest\com\ams\core\webdav\_WebDavResource_EJBObjectImpl_Tie.java:1160: Class java.io.java.io.InputStream not found.
java.io.java.io.InputStream result;
^
C:\Sun\SunONE\AppServer7\domains\domain1\server1\generated\ejb\j2ee-apps\coretest\com\ams\core\webdav\_WebDavResource_EJBObjectImpl_Tie.java:1693: Class java.io.java.io.InputStream not found.
java.io.java.io.InputStream result;
^
C:\Sun\SunONE\AppServer7\domains\domain1\server1\generated\ejb\j2ee-apps\coretest\com\ams\core\webdav\_WebDavResourceRemote_Stub.java:2924: The method java.io.java.io.InputStream getMethod(boolean) declared in class com.ams.core.webdav._WebDavResourceRemote_Stub cannot override the method of the same signature declared in interface com.ams.core.webdav.WebDavResourceRemote. They must have the same return type.
public java.io.java.io.InputStream getMethod(boolean arg0) throws com.ams.core.webdav.WebDavException, java.rmi.RemoteException {
^
C:\Sun\SunONE\AppServer7\domains\domain1\server1\generated\ejb\j2ee-apps\coretest\com\ams\core\webdav\_WebDavResourceRemote_Stub.java:3012: The method java.io.java.io.InputStream getMethod(java.lang.String, boolean) declared in class com.ams.core.webdav._WebDavResourceRemote_Stub cannot override the method of the same signature declared in interface com.ams.core.webdav.WebDavResourceRemote. They must have the same return type.
public java.io.java.io.InputStream getMethod(String arg0, boolean arg1) throws com.ams.core.webdav.WebDavException, java.rmi.RemoteException {
^
4 errors
     at com.iplanet.ias.deployment.backend.EJBCompiler.wrapException(EJBCompiler.java:608)
     at com.iplanet.ias.deployment.backend.EJBCompiler.compile(EJBCompiler.java:186)
     at com.iplanet.ias.deployment.backend.AppDeployer.runEJBC(AppDeployer.java:215)
     at com.iplanet.ias.deployment.backend.AppDeployer.deploy(AppDeployer.java:98)
     at com.iplanet.ias.deployment.backend.AppDeployer.doRequest(AppDeployer.java:50)
     at com.iplanet.ias.admin.server.core.mbean.config.ManagedServerInstance.deployJ2EEApplicationArchiveOrDirectory(ManagedServerInstance.java:789)
     at com.iplanet.ias.admin.server.core.mbean.config.ManagedServerInstance.deployJ2EEApplication(ManagedServerInstance.java:694)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.iplanet.ias.admin.server.core.jmx.Introspector.invokeMethodOn(Introspector.java:188)
     at com.iplanet.ias.admin.server.core.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:137)
     at com.iplanet.ias.admin.server.core.jmx.ASMBeanServerImpl.invoke(ASMBeanServerImpl.java:222)
     at com.iplanet.ias.admin.servermodel.controllers.SOMRequestDispatcher.invoke(SOMRequestDispatcher.java:88)
     at com.iplanet.ias.admin.servermodel.controllers.AppServerInstanceCo
[07/Apr/2006:09:47:18] WARNING ( 6716): ntroller.doDeploy(AppServerInstanceController.java:2518)
     at com.iplanet.ias.admin.servermodel.controllers.AppServerInstanceController.deployApplication(AppServerInstanceController.java:1341)
     at com.iplanet.ias.admin.servermodel.AppServerInstance.deployApplication(AppServerInstance.java:278)
     at com.iplanet.ias.admin.server.gui.jato.DeployEARApplicationViewBean.add(DeployEARApplicationViewBean.java:128)
     at com.iplanet.ias.admin.server.gui.jato.IASViewBean.handleOkRequest(IASViewBean.java:235)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.iplanet.jato.view.command.DefaultRequestHandlingCommand.execute(DefaultRequestHandlingCommand.java:183)
     at com.iplanet.jato.view.RequestHandlingViewBase.handleRequest(RequestHandlingViewBase.java:299)
     at com.iplanet.jato.view.ViewBeanBase.dispatchInvocation(ViewBeanBase.java:811)
     at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:749)
     at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandler(ViewBeanBase.java:596)
     at com.iplanet.jato.ApplicationServletBase.dispatchRequest(ApplicationServletBase.java:772)
     at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:446)
     at com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:324)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:720)
     at org.apache.catalina.core.StandardWrapperValve.access$000(StandardWrapperValve.java:118)
     at org.apache.catalina.core.StandardWrapperValve$1.run(StandardWrapperValve.java:278)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:274)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:203)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:158)
     at com.iplanet.ias.web.WebContainer.service(WebContainer.java:856)
As you can see the generated files do not compile because a class specified as java.io.java.io.InputStream does not exists. My ear can be generated successfully and the class in question is specified to be java.io.InputStream. I am running Sun Java System Application Server 7 2004Q2 Update 4.. Any help on this matter will be appreciated.
Thanks in advance
Jairo Vazquez

Hi,
I am trying to deploy an ear with several ejbs in it, however the deployment fails since there are errors on the generated files for an specific. The error in the logs is:
[07/Apr/2006:09:47:18] SEVERE ( 6716): DPL5102: EJBC - rmic compilation failed
[07/Apr/2006:09:47:18] WARNING ( 6716): DPL5035:Error while running ejbc
com.iplanet.ias.deployment.backend.IASDeploymentException: Fatal Error from EJB Compiler -- -- rmic compilation failed: com.iplanet.ias.ejb.codegen.JavaCompilerException: RMI compiler returned an error: C:\Sun\SunONE\AppServer7\domains\domain1\server1\generated\ejb\j2ee-apps\coretest\com\ams\core\webdav\_WebDavResource_EJBObjectImpl_Tie.java:1160: Class java.io.java.io.InputStream not found.
java.io.java.io.InputStream result;
^
C:\Sun\SunONE\AppServer7\domains\domain1\server1\generated\ejb\j2ee-apps\coretest\com\ams\core\webdav\_WebDavResource_EJBObjectImpl_Tie.java:1693: Class java.io.java.io.InputStream not found.
java.io.java.io.InputStream result;
^
C:\Sun\SunONE\AppServer7\domains\domain1\server1\generated\ejb\j2ee-apps\coretest\com\ams\core\webdav\_WebDavResourceRemote_Stub.java:2924: The method java.io.java.io.InputStream getMethod(boolean) declared in class com.ams.core.webdav._WebDavResourceRemote_Stub cannot override the method of the same signature declared in interface com.ams.core.webdav.WebDavResourceRemote. They must have the same return type.
public java.io.java.io.InputStream getMethod(boolean arg0) throws com.ams.core.webdav.WebDavException, java.rmi.RemoteException {
^
C:\Sun\SunONE\AppServer7\domains\domain1\server1\generated\ejb\j2ee-apps\coretest\com\ams\core\webdav\_WebDavResourceRemote_Stub.java:3012: The method java.io.java.io.InputStream getMethod(java.lang.String, boolean) declared in class com.ams.core.webdav._WebDavResourceRemote_Stub cannot override the method of the same signature declared in interface com.ams.core.webdav.WebDavResourceRemote. They must have the same return type.
public java.io.java.io.InputStream getMethod(String arg0, boolean arg1) throws com.ams.core.webdav.WebDavException, java.rmi.RemoteException {
^
4 errors
     at com.iplanet.ias.deployment.backend.EJBCompiler.wrapException(EJBCompiler.java:608)
     at com.iplanet.ias.deployment.backend.EJBCompiler.compile(EJBCompiler.java:186)
     at com.iplanet.ias.deployment.backend.AppDeployer.runEJBC(AppDeployer.java:215)
     at com.iplanet.ias.deployment.backend.AppDeployer.deploy(AppDeployer.java:98)
     at com.iplanet.ias.deployment.backend.AppDeployer.doRequest(AppDeployer.java:50)
     at com.iplanet.ias.admin.server.core.mbean.config.ManagedServerInstance.deployJ2EEApplicationArchiveOrDirectory(ManagedServerInstance.java:789)
     at com.iplanet.ias.admin.server.core.mbean.config.ManagedServerInstance.deployJ2EEApplication(ManagedServerInstance.java:694)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.iplanet.ias.admin.server.core.jmx.Introspector.invokeMethodOn(Introspector.java:188)
     at com.iplanet.ias.admin.server.core.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:137)
     at com.iplanet.ias.admin.server.core.jmx.ASMBeanServerImpl.invoke(ASMBeanServerImpl.java:222)
     at com.iplanet.ias.admin.servermodel.controllers.SOMRequestDispatcher.invoke(SOMRequestDispatcher.java:88)
     at com.iplanet.ias.admin.servermodel.controllers.AppServerInstanceCo
[07/Apr/2006:09:47:18] WARNING ( 6716): ntroller.doDeploy(AppServerInstanceController.java:2518)
     at com.iplanet.ias.admin.servermodel.controllers.AppServerInstanceController.deployApplication(AppServerInstanceController.java:1341)
     at com.iplanet.ias.admin.servermodel.AppServerInstance.deployApplication(AppServerInstance.java:278)
     at com.iplanet.ias.admin.server.gui.jato.DeployEARApplicationViewBean.add(DeployEARApplicationViewBean.java:128)
     at com.iplanet.ias.admin.server.gui.jato.IASViewBean.handleOkRequest(IASViewBean.java:235)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.iplanet.jato.view.command.DefaultRequestHandlingCommand.execute(DefaultRequestHandlingCommand.java:183)
     at com.iplanet.jato.view.RequestHandlingViewBase.handleRequest(RequestHandlingViewBase.java:299)
     at com.iplanet.jato.view.ViewBeanBase.dispatchInvocation(ViewBeanBase.java:811)
     at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:749)
     at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandler(ViewBeanBase.java:596)
     at com.iplanet.jato.ApplicationServletBase.dispatchRequest(ApplicationServletBase.java:772)
     at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:446)
     at com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:324)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:720)
     at org.apache.catalina.core.StandardWrapperValve.access$000(StandardWrapperValve.java:118)
     at org.apache.catalina.core.StandardWrapperValve$1.run(StandardWrapperValve.java:278)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:274)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:203)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:158)
     at com.iplanet.ias.web.WebContainer.service(WebContainer.java:856)
As you can see the generated files do not compile because a class specified as java.io.java.io.InputStream does not exists. My ear can be generated successfully and the class in question is specified to be java.io.InputStream. I am running Sun Java System Application Server 7 2004Q2 Update 4.. Any help on this matter will be appreciated.
Thanks in advance
Jairo Vazquez

Is there a way to turn on verbose output for proc?

I'm using 7.3.4 -- I know, it is no longer supported and we are in the process of upgrading to 9i. But until we do, we are having problems compiling a library that was just successfully compiled yesterday afternoon. Nothing has changed in the 7.3.4 installation. Nothing has changed in the libraries source code. Nothing has changed in the makefile. Nothing has changed in my env.
But now I cannot compile this library. I get:
PCC-F-NOERRFILE, unable to open error message file, facility PR2
And sure enough, $(ORACLE_HOME)/precomp/admin/pcscfg.cfg exists but it is zero length.
So I tried copying the 8.1.7 version of this file, and I get the same PCC-F-NOERRFILE message.
So is there a way to turn on verbose when you are compiling the .pc files?

No, not in Number for iOS.

How to delete the Generated files from application server(open hub)?

hi experts,
when i try to execute process chain the DTP it is giving below dump. Exception CX_RSBK_REQUEST_LOCKED logged.
when i execute the DTP manually and trying to delete the previous request, it is giving for dump ITAB_DUPLICATE_KEY.
so to delete the generated file from application server, how to delete it for specific dates?
Information on where terminated
Termination occurred in the ABAP program "GPD6S3OE0BCVGC6L9DBNVYQARZM" - in
"START_ROUTINE".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 2874
of the (Include) program "GPD6S3OE0BCVGC6L9DBNVYQARZM".
The program "GPD6S3OE0BCVGC6L9DBNVYQARZM" was started as a background job.
and when i check the dump it is point out at below code
" Populate the lookup table for 0STOR_LOC
SELECT * from /BI0/TSTOR_LOC
into CORRESPONDING FIELDS OF table L_0STOR_LOC_TEXT
FOR ALL ENTRIES IN SOURCE_PACKAGE WHERE
STOR_LOC = SOURCE_PACKAGE-STOR_LOC.
but the programme is syntactically correct only.
how to rectify the issue.
regards
venuscm
Edited by: venugopal vadlamudi on Sep 28, 2010 1:59 PM

hi experts,
We have written start routine to get the storage location text and sending to File located at Application server through OPEN HUB.
here is the code written in the Transformations
In the global section
Text for 0STOR_LOC
    DATA: l_0stor_loc_text TYPE HASHED TABLE OF /bi0/tstor_loc
          WITH UNIQUE KEY stor_loc.
    DATA: l_0stor_loc_text_wa TYPE /bi0/tstor_loc.
and in the code to get the text
" Populate the lookup table for 0STOR_LOC
    *SELECT * from /BI0/TSTOR_LOC*
      into CORRESPONDING FIELDS OF table L_0STOR_LOC_TEXT
      FOR ALL ENTRIES IN SOURCE_PACKAGE WHERE
              STOR_LOC = SOURCE_PACKAGE-STOR_LOC.
im sure there is problem with the Routine only. i think i need to change the code if so please provide me the modified one.
thanks
venuscm
Edited by: venugopal vadlamudi on Sep 29, 2010 9:37 AM

How Do RoboHelp 9 WebHelp Generated Files Handle Map IDs and Aliases?

The text below was written by our team's developer/architect. I am the help author who uses RoboHelp to write content and generate the help files, but I am clueless how it all gets generated and is deployed. Please help. We use RoboHelp 9. I use it in Windows XP and our app and help run on IE 7, 9, and Firefox (multiple versions).
"Our application uses the numeric identifiers associated with the Map ID. For example, to get to the <appname>_home_page.htm file, we use the number 1053. <appname> = pecs, in this example.
All of this is used in a call to a RoboHelp method defined in the RoboHelp_CSH.js file. The mehtod we are calling is the RH_ShowHelp() JavaScript method and the code to perform the call, when you click on Page Help, is this:
RH_ShowHelp(0, ''/pecsHelp/index.htm>pecsHelp',HH_HELP_CONTEXT,topic);
Topic is translated to the Map ID number for the page help. HH_HELP_CONTEXT is defined in the RoboHelp_CSH.js file. This method translates into a URL and from what I have seen, the URL that gets generated is this:
http://{server}[:port]/pecsHelp/index.htm/{server}[:port]/pecsHelp/index.htm#<id=1053>>pecsHelp
Server and port get replaced with the appropriate values. I have no clue how id=1053 is supposed to get translated to mean "pecs_home_page.htm". If you check the PECS_help.h file, you will see the following entry:
#define PECS_Home_Page1 1053
Then in the RoboHelp alias file (PECS 3.0.ali), the following line is in the file:
<alias name="PECS_Home_Page1" link="pecs_home_page.htm"> </alias>
But both of these files are used during the WebHelp generation process and I don't know how the WebHelp generated files handle the Map ID and aliases."

You need to assign the numbers you find in the pecs_help.h file to topics in your help. You do this in Context Sensitive Help > Map Files > All Map IDs. (From RH7, but I assume the location is similar in RH9.) This creates the entries in the .ali file.
Peter Grainge suggests a couple of sites to read for a greater understanding here:
http://www.grainge.org/pages/authoring/calling_webhelp/using_map_ids.htm
(Although the second site is based on RH X5, the basic concepts and procedures should be very similar. )
HTH,
Amber

I have a white MacBook. I just changed out the hard drive with a 500GB. When I turn it on I get a file fold with a ? In the middle that flashes. What do I do next?

I have a white MacBook and I just changed out the hard drive with a 500GB. When I turn it on I get a file fold with a ? In the middle that flashes. What do I do next?

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Generate file on F110

Dear Friends,
Please help how to generate file from the
F110 Automatic Program and f-58 Vendor Payment
we had a requirment to generate file on documents posted on the these transactions generate file and send it to other addon system I will assign full points for your suggession.
Regards
Bharath

HI,
When configuring the payment methods for the country (transaction OBVCU), choose the payment medium program as RFFOM100.
From se38, pls read the documentation for the program, which will give you the various options & the required config too.
You would also need to configure the instructions keys as required.
To generate the DME file, you have to run the automatic payment program with this payment method.
After the payments have been successfully posted, you can go to DME administration and with the help of dme manager download files on your PC.
SAP has determined that the standard print programs for automatic payments will no longer be supported, and will be replaced by transfer structures created by a tool called the DME Engine.
This tool enables the business to create DME output files without ABAP development, and can be attached to a print program and form for the creation of Payment Advices.
Outside of the DME Engine (DMEE), the majority of the configuration takes place within the following IMG menu path:
IMG Path: Financial Accounting -> Accounts Receivable and Accounts Payable -> Business Transactions -> Outgoing Payments -> Automatic Outgoing Payments -> Payment Media -> Make Settings for Payment Media Formats from Payment Medium Workbench
Config
Assign Selection Variants
IMG -> Financial Accounting -> Accounts Receivable and Accounts Payable -> Business Transactions -> Outgoing Payments -> Automatic Outgoing Payments -> Payment Media -> Make Settings for Payment Medium Formats from Payment Medium Workbench -> Create / Assign Selection Variants or transaction
OBPM4..select your format that you are using
Check in FBZP config that all is linked!
Although this is bitty but you need to work through it!
Start with FBZP, create all there than go to DMEE either to create your own format or use the standard ones.. than go to the menu path above and work through from create to assign...
hope this is clear
assign points.
with regards
krishna

Generated files and layout

After generating automatic documents in Frame9 suchs as TOC, List of Figures and the like I have saved these as templates. Trying to import these formats into newly generated documents will not import the chapter and pagenumbers nor their layout even though these have been included on the reference pages. Adjusting these afterwards often does not affect position, style or layout. More concrete: the numbers in front of the titles are specified yet missing, the page numbers are directly behind the titles instead of at the configured tab stop. Moreover, titles are in Arial, while the pagenums having the same paragraph tag are times new roman. Something I cannot seem to change. Why does Frame not import the settings from the template or respond to my adjustments after updating. Sometimes it only partly updates.
Any help and ideas are welcome

Pieter van de Sande wrote:
Ok that's what I thought when posing the question. Index and TOC are incompatible. To me they are simply generated files and if I configure the page numbers to be on the right in the Arial font in the TOC I expect these to be the same after importing formats into another generated file. I guess I need to change my train of thought.
Yes, the're independent from each other. If you look on the TOC reference page, you'll find entries like:
<$paratext>(tab character) <$pagenum>
This entry is formatted using the assigned "TOC" paragraph style, e.g. if you're reading a paragraph style named "Heading1", this entry is formatted using the "Heading1TOC" paragraph style. If this style is set to Arial, the whole line (paragraph text and page number) will be formatted using the Arial font, as long as you don't use separate character styles for the placeholders (<$paratext> or <$pagenum>).
Looking on the SIX reference page, there are other entries. You'll see e.g.
Level1SIX (tab character)
(tab character)<$pagenum>
In this case the text entry is formatted using the "Level1SIX" paragraph format, and the page number is formatted using the "IndexSIX" format. These may specify different fonts. You see, there are completely different formats and "building blocks" which are used to create a TOC and an Index entry.
Bernd

Not generate file using ItemAdded Event in SharePoint Online

I develop a list item event receiver For Sharepoint online.I upload the .wsp file in solution and activate the feature On ItemAdded event I create/generate document on 15 document library based on library template.
Some time it generate all 15 files and sometime it generate 8/10/12 files.
i.e not generate files in all the document library.
It work fine in my local server.
Please Help me.

 ****1.design_Pre_Order_Meeting_Template [=========== ] System.ArgumentException: Value does not fall within the expected range.
Server stack trace:
   at Microsoft.SharePoint.SPWeb.GetWebRelativeUrlFromUrl(String strUrl, Boolean includeQueryString, Boolean canonicalizeUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile(String strUrl)
   at new_contract_request.pc_contract_request_form.pc_contract_request_form.ItemAdded(SPItemEventProperties properties) ****2.design_Checklist_T [=========== ] System.ArgumentException: Value does not fall within the expected range.
Server stack trace:
   at Microsoft.SharePoint.SPWeb.GetWebRelativeUrlFromUrl(String strUrl, Boolean includeQueryString, Boolean canonicalizeUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile(String strUrl)
   at new_contract_request.pc_contract_request_form.pc_contract_request_form.ItemAdded(SPItemEventProperties properties) ****3.design_Drawing_Change_Schedule [=========== ] System.ArgumentException: Value does not fall within the
expected range.
Server stack trace:
   at Microsoft.SharePoint.SPWeb.GetWebRelativeUrlFromUrl(String strUrl, Boolean includeQueryString, Boolean canonicalizeUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile(String strUrl)
   at new_contract_request.pc_contract_request_form.pc_contract_request_form.ItemAdded(SPItemEventProperties properties) ****4.design_Responsibility_Matrix_Template [=========== ] System.ArgumentException: Value does not fall within
the expected range.
Server stack trace:
   at Microsoft.SharePoint.SPWeb.GetWebRelativeUrlFromUrl(String strUrl, Boolean includeQueryString, Boolean canonicalizeUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile(String strUrl)
   at new_contract_request.pc_contract_request_form.pc_contract_request_form.ItemAdded(SPItemEventProperties properties) ****5.design_Review_Record_Template [=========== ] System.ArgumentException: Value does not fall within the expected
range.
Server stack trace:
   at Microsoft.SharePoint.SPWeb.GetWebRelativeUrlFromUrl(String strUrl, Boolean includeQueryString, Boolean canonicalizeUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile(String strUrl)
   at new_contract_request.pc_contract_request_form.pc_contract_request_form.ItemAdded(SPItemEventProperties properties) ****6.design_Risk_Assesment_Template [=========== ] System.ArgumentException: Value does not fall within the
expected range.
Server stack trace:
   at Microsoft.SharePoint.SPWeb.GetWebRelativeUrlFromUrl(String strUrl, Boolean includeQueryString, Boolean canonicalizeUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile(String strUrl)
   at new_contract_request.pc_contract_request_form.pc_contract_request_form.ItemAdded(SPItemEventProperties properties) ****7.design_Supplier_Material_Sheet [=========== ] System.ArgumentException: Value does not fall within the
expected range.
Server stack trace:
   at Microsoft.SharePoint.SPWeb.GetWebRelativeUrlFromUrl(String strUrl, Boolean includeQueryString, Boolean canonicalizeUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile(String strUrl)
   at new_contract_request.pc_contract_request_form.pc_contract_request_form.ItemAdded(SPItemEventProperties properties) ****8.design_Team_Meeting_T [=========== ] System.ArgumentException: Value does not fall within the expected
range.
Server stack trace:
   at Microsoft.SharePoint.SPWeb.GetWebRelativeUrlFromUrl(String strUrl, Boolean includeQueryString, Boolean canonicalizeUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile(String strUrl)
   at new_contract_request.pc_contract_request_form.pc_contract_request_form.ItemAdded(SPItemEventProperties properties) ****9.pc_Key_Isssue_Schedule [=========== ] System.ArgumentException: Value does not fall within the expected
range.
Server stack trace:
   at Microsoft.SharePoint.SPWeb.GetWebRelativeUrlFromUrl(String strUrl, Boolean includeQueryString, Boolean canonicalizeUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile(String strUrl)
   at new_contract_request.pc_contract_request_form.pc_contract_request_form.ItemAdded(SPItemEventProperties properties) ****10.pc_Client_Progress_Report [=========== ] System.ArgumentException: Value does not fall within the expected
range.
Server stack trace:
   at Microsoft.SharePoint.SPWeb.GetWebRelativeUrlFromUrl(String strUrl, Boolean includeQueryString, Boolean canonicalizeUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile(String strUrl)
   at new_contract_request.pc_contract_request_form.pc_contract_request_form.ItemAdded(SPItemEventProperties properties) ****11.pc_Design_Change_Register [=========== ] System.ArgumentException: Value does not fall within the expected
range.
Server stack trace:
   at Microsoft.SharePoint.SPWeb.GetWebRelativeUrlFromUrl(String strUrl, Boolean includeQueryString, Boolean canonicalizeUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile(String strUrl)
   at new_contract_request.pc_contract_request_form.pc_contract_request_form.ItemAdded(SPItemEventProperties properties) ****12.pc_rfi_schedule [=========== ] System.ArgumentException: Value does not fall within the expected range.
Server stack trace:
   at Microsoft.SharePoint.SPWeb.GetWebRelativeUrlFromUrl(String strUrl, Boolean includeQueryString, Boolean canonicalizeUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile(String strUrl)
   at new_contract_request.pc_contract_request_form.pc_contract_request_form.ItemAdded(SPItemEventProperties properties) ****13.pc_Drawing_Progress_Schedule_T [=========== ] System.ArgumentException: Value does not fall within the
expected range.
Server stack trace:
   at Microsoft.SharePoint.SPWeb.GetWebRelativeUrlFromUrl(String strUrl, Boolean includeQueryString, Boolean canonicalizeUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile(String strUrl)
   at new_contract_request.pc_contract_request_form.pc_contract_request_form.ItemAdded(SPItemEventProperties properties) ****14.pc_Technical_Submittal_Schedule [=========== ] System.ArgumentException: Value does not fall within the
expected range.
Server stack trace:
   at Microsoft.SharePoint.SPWeb.GetWebRelativeUrlFromUrl(String strUrl, Boolean includeQueryString, Boolean canonicalizeUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile(String strUrl)
   at new_contract_request.pc_contract_request_form.pc_contract_request_form.ItemAdded(SPItemEventProperties properties) ****16.pc_Drawing_Issue_Schedule [=========== ] System.ArgumentException: Value does not fall within the expected
range.
Server stack trace:
   at Microsoft.SharePoint.SPWeb.GetWebRelativeUrlFromUrl(String strUrl, Boolean includeQueryString, Boolean canonicalizeUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile(String strUrl)
   at new_contract_request.pc_contract_request_form.pc_contract_request_form.ItemAdded(SPItemEventProperties properties) ****19.proc_Pre_Order_Meeting_T [=========== ] System.ArgumentException: Value does not fall within the expected
range.
Server stack trace:
   at Microsoft.SharePoint.SPWeb.GetWebRelativeUrlFromUrl(String strUrl, Boolean includeQueryString, Boolean canonicalizeUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile(String strUrl)
   at new_contract_request.pc_contract_request_form.pc_contract_request_form.ItemAdded(SPItemEventProperties properties) ****20.proc_Preferred_Supplier_List [=========== ] System.ArgumentException: Value does not fall within the expected
range.
Server stack trace:
   at Microsoft.SharePoint.SPWeb.GetWebRelativeUrlFromUrl(String strUrl, Boolean includeQueryString, Boolean canonicalizeUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.SharePoint.SPWeb_SubsetProxy.GetFile(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile__Inner(String strUrl)
   at Microsoft.SharePoint.SPWeb.GetFile(String strUrl)
   at new_contract_request.pc_contract_request_form.pc_contract_request_form.ItemAdded(SPItemEventProperties properties)

How to use a ".generate" file in JDeveloper 11g ?

hi
Using JDeveloper 11g (11.1.1.0.1) I created a Database Diagram and dropped both SCOTT.EMP and SCOTT.DEPT tables on it, creating Offline Database Objects.
After that I used the "Generate..." option from the right-click menu on the SCOTT Offline Database Source in JDeveloper, to generate a SQL script.
Step 6 of 6 allowed me to "Save settings for reuse", resulting in a ".generate" file (see GenerateSQLFromDatabaseObjectsStep6Of6.png).
question
How should I be able to reuse such a ".generate" file, the right-click menu does not have a "Generate" option (like JDeveloper 10g has) or something similar, see GenerateSQLRightClickMenuForGenerateFile.png.
many thanks
Jan Vervecken

Thanks for your reply Susan.
You were not able to access it via metalink as it was categorized as an internal bug rather than a production version bug. Since it has now been fixed it is unlikely that I can get it changed to allow it to be seen via metalink.about "unlikely", see also ...
... Steve Muench : "Re: Request for "WHERE - IN" Combination with Bind Variables."
... Keimpe Bronkhorst : "Re: Generics : compiler option : unchecked conversion warnings"
... Brian Duff : "Re: Surround With Try/Catch : comments issue"
... Frank Nimphius : "Re: Jdev 11g: Warnings in structure window for jspx (makeCurrent)"
But there is probably an explanation.
regards
Jan

Filespaces in generated file names - unfortunate

I'm trying to upload all the files generated by an export to directory. Many of the auto-generated file names use the name of a page (which is displayed in the navigation - so i don't want to remove the spaces).
This creates files with blanks in the name, and most FTP implementations will choke on this.
#1 - this should be fixed
#2 - does anyone have a workaround for managing this?

Spaces are not valid in web pages. If used, they have to be escaped with %20
If you want to change the names of files before trying to use them with some web publishing program, this shell script might be of use. It changes spaces to _ makes upper case letters lower case, etc.
#!/bin/bash
# Pete keeps giving me photos with bad file names
for i in *
do
OLDNAME="$i"
NEWNAME=`echo "$i" | tr ' ' '_' | tr A-Z a-z | sed s/-/-/g`
if [ "$NEWNAME" != "$OLDNAME" ]
then
TMPNAME="$i"_TMP
echo ""
mv -v -- "$OLDNAME" "$TMPNAME"
mv -v -- "$TMPNAME" "$NEWNAME"
fi
done

Turn a script into an .exe file?

Hi,
How can I turn a JavaScript into an .exe file (on Windows)? The
advantage is that if the script uses only ScriptUI features, it will
never need to launch InDesign. Additionally, it is possible to package
it that way with a special icon that appears if it is placed on the
desktop, and when it runs the icon appears in the taskbar.
An example of what I'd look to achieve is the hyphenchecker script,
written by the late Teus de Jong. There is one Windows-only version
available on his website (which is still being maintained, probably by
his son) which is an .exe file -- precisely what I'm trying to do.
Thanks,
Ariel

straight form javascript i don't think there is a way.
however you can use, i think, Visual Basic (not vbScript!!) as a wrapper for js (using doScript)?

BPM - Generate file when message is successful

Hi,
We have designed the BPM to update database system by using JDBC receiver adapter.
Following are the steps in BPM :
1. Send data to XI from R/3 system by using ABAP proxy
2. Make Sync call to R/3 system to get details of the data sent by using ABAP Proxy
3. Update Database system by using JDBC receiver adapter
4. Make Sync call to SRM system to get details of the data sent by using ABAP Proxy
5. Update Database system by using JDBC receiver adapter.
Now I want to generate the file 'A' after step 3 if database is updated successfully and file 'B' after step 5 if database is updated successfully.
Which steps I can use in BPM to generate files? Or is there any other alternative?
Thanks in advance!
Mrudula

Hi Sudhir,
Thanks for your reply.
I would make changes and see how it works.
Thanks!

Turning on verbose in EJBC generated files

Similar Messages

Maybe you are looking for