[TV@Master] recorded tv show no audio

I just wanted to watch a show I recorded weeks ago. There was no sound. Is there a way to check if the broadcast station had no audio or if my step up was at fault and is there anyway to restore if it is the latter? All other recordings are ok.

i presume you are using the MSIPVS software, as you don't say
Quote
Audio Input:
"Device" will be your soundcard or onboard audio device
"Source" will be the connector your TV card audio output is connected to, this will be "TV" on Mega series, otherwise check!! If you connected the internal lead to AUX on your soundcard or mobo, then set it to "AUX". If you used external lead to connect to Line-In, this will be "Line-in" etc etc.
If you don't set these correctly you may or may not hear audio while watching live TV, and you will hear no audio on recorded TV.

Similar Messages

  • Credit master records are showing the wrong credit exposure?

    Hi,
    Some credit master records are showing the wrong credit exposure and therefore orders are being credit blocked when they should have been approved.
    The problems occur after the credit limit has changed in the credit master record
    Please Help.
    Regards,
    Chamandeep

    Dear Chamandeep,
    Trust you have reviewed the open documents that would constitute to credit exposure, and have turned a blank.
    In such cases, it is possible to reorganise the credit master data of customers by using the programmes RVKRED77 and RVKRED07.
    Kindly prefer the latter as it permits greater flexibility especially in selection of dates of data reorganisation.
    In either case, the data  re-organisation is resource intensive and is best run when all other users are cleared from the system.
    Regards,
    K Gopidas

  • PO closed, but item master record still shows on order

    SAP B1 8.8 SP00, PL 15
    In all my PO history, I have only ordered this item twice: one PO for 10,000 for WHS1 and one PO for 8,800 to WHS2. Both orders were over-received (10,222 and 8,890). They were copied to Goods Receipt PO and the POs were closed automatically. But when I look at the item master record, WHS1 still shows 10,000 still on order.
    How can this be and how can I clean up the whs record record?

    Hi Cindy,
    Sounds like a bug for me. Changing quantity in GR-PO won't and shouldn't broken the link between PO and GR-PO. Even if you change the item in GR-PO which resulted in broken link, your PO shouldn't altered into closed status.
    You explain that the status of PO closed, only 2 PO for this particular item and on order still 10,000, smells like a bug. IMO, make sure for the last time that you only have 2 PO and all PO status with this item already closed. If you already confirm this true, you need to escalate this matter to SAP and let SAP fix the database for you.
    Best Regards,
    Hendry Wijaya

  • Internal number not showing while creating customer master record

    Dear All.
    After creation of account group and doing patner determination procedure, while creating customer master record it is showing all the 4 functions of partner in partner function tab page but the internal number is  not displaying. I have set number range internally.
    Thanks..
    CG Balaji

    > Dear All.
    >
    > After creation of account group and doing patner
    > determination procedure, while creating customer
    > master record it is showing all the 4 functions of
    > partner in partner function tab page but the internal
    > number is  not displaying. I have set number range
    > internally.
    >
    > Thanks..
    >
    > CG Balaji
    Hi,
    In your partner determination procedure for Customer master, apart from assigning a Pratner proc to your A/c grp, you also need to maintain the combination of your a/c group with the partner functions that you have in your procedure.
    On the left side panel, you have a link (i think 5th) saying Account group - Function assignment. In this, maintian the partner functions that you want to your a/c grp.
    This will allow taking INTERNAL numbers during customer creation.
    Thanks and reward points if useful

  • Report / Query to show all texts within all customer master records

    Hi,
    Can anyone let me know if there is a report or a query to show all texts within all customer master records?
    Many Thanks
    Aries

    Hello Aries,
    I don't believe there is a standard SAP report that does this. 
    But,...
    You can see all the customer text types (Customer SD) using transaction VOTX. 
    Table TTXID contains the same info using Text Object "KNVV". 
    If you decide to have a custom ABAP developed use function READ_TEXT.  SE37 can be used to validate a test.
    Regards,
    Jim

  • Report that shows material master record with sales text

    We have a requirement to pull the material number along with the material sales text from the material master.  Does a standard report exist that includes the sales text (from the sales text tab in the material master record?)
    Thanks in advance.

    Hi,
    There are not any SAP Standard Report.
    The item texts are stored in table
    STXL - STXD SAPscript text file lines
    You need to retrieve the Text maintained using the Function module
    READ_TEXT
    goto SE37 , & Click on test enter the details
    Text Object MATNR
    Text Name 6000000376
    Text ID 0001
    Language EN
    And execute the Text maintain in the Text ID - 0001 - Sales Text will be retrieved.

  • How to save a "new" master record when pressing the "create" in the detail

    I have a simple Master - Detail form for a Customer - Activity case, where the update of Activity table happens through an additional form.
    When users press the create a new user on the top report (Customer Report) they enter the Master detail form, fill in all the Customer fields and instead of saving the customer (master) record and then come back to create a new activity (detail), they press right away the "create new activity" button, causing all customer data (master) to get lost.
    Is there a way to trigger the parent record to be saved when a user presses the create activity (detail) button?
    Thank you
    Yannis

    In order to show you better the idea, I created a demo application that you can see at: http://apex.oracle.com/pls/otn/f?p=45792:2:1386218200737406::NO:::
    When you create a new order (page 3) you can see that instead of inline editing for the detail, there is a report that will drive to another form (page 4) to edit the data for order detail.
    So just to clarify, I am interested to find out in page 3, how to cause a master record to save (when on insert) when a user press the Create button to add a new order detail.
    Thank you
    Yannis

  • I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

    I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
    Thank you,
    Chris

    Michael,
    Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
    As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
    Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
    Best regards,
    David

  • See my problem no master record move to next record

    hi master
    sir
    i have master detail block master table have all data but detail no data i need feed data in detail then i goto in detail block write value and press F10 for save
    for new record in detail
    in detail blick post-block or post_record or post_insert event i write this code
    go_block('masterblock');
    next_record;
    go_item('detailblock.item');
    but not responses no master block move to next record still and my curser sitll in last postion
    sir how i move master record after save the detail record and jump to detail block for new record
    please give me idea or code
    thanking you
    aamir

    thank for reply
    sir your help very usefull for my but when i press F10 then system show massage do you want to save change the record
    sir how i avoid that window and directly move to next record
    please give me idea
    thanking you
    aamir

  • Close period for material Master record error

    my current period is 07 2010.
    I want to close period 07 2010, and make new posting to period 08 2010.
    but when i do the posting, system show error "Posting only possible in periods 2010/07 and 2010/06 in company code C999"
    PS: C999 is the company code that contains the plant P999
    And when i try to close the current period of material Master record  by MMPV, system show below information :
    "L O G
    Mode: Check and close period
    Client: 000
    Period entered (month/year): 07 2010
    Incorrect period in control rec. of CoCd C999; no conversion The current period (month/year) of the control record is 07 2010
    Period closing complete; log issued.
    E N D"
    and my current OB52 setting is below:
    Please help to supply some suggestion.
    P999     +               1     2010     12     2010     13     2010     16     2010
    P999     A          ZZZZZZZZZZ     1     2010     12     2010     13     2010     16     2010
    P999     D          ZZZZZZZZZZ     1     2010     12     2010     13     2010     16     2010
    P999     K          ZZZZZZZZZZ     1     2010     12     2010     13     2010     16     2010
    P999     M          ZZZZZZZZZZ     1     2000     12     2010     13     2000     16     2010
    P999     S          ZZZZZZZZZZ     1     2010     12     2010     13     2010     16     2010
    V001     +               1     2000     12     2010     13     2000     16     2010

    Hi,
    Check in T.code: MMRV and see which period is open for ur Co.Code and back posting is allowed or not. If you are sure to open new period now of  new posting to period 08, then
    use t.code: MMPV ,
    enter
    Company code C999
    Period to open 08
    Fiscal Year 2010
    Execute
    ( system will close the period last period 07 and automatically system open the new one 08)
    Now try ur transaction.
    if any problem, then check  in FI Side:
    Use t.code: OB52 and open the 08,2010 period in Account Types A, K, D,M, S and specially Account Type u201C+u201D which stands for valid for all accounts type and save. Better consult FICO consultant for OB52 step.
    Regards,
    Biju K

  • FI-AA and the Automatic Creation of Equipment Master Records

    Our client is currently on SAP R/3 4.7E and per SAP Notes 176056, 370884, 361520, releases above 4.6B should be able to automatically create an equipment resord master record from within FI-AA.  Configuration shows that undaer FI-AA Master Data the integration should be possible, but we have tested and cannot get it to work.  No equipment record is ever created. 
    Has anyone been successful in performing this function?
    What are we missing?
    Thank You.
    Ruthie

    Hi,
    Simple,
    1. Go to AOLK and check which tab layout is assigned to your asset class, to transaction group 'Others'.
    2. Go to AOLA select layout you found out at 1st step, then double click on 'Tab Page Titles'.
    3. Select tab page Allocations and click on position group on tab pages.
    4. Click on new entries and insert 'S0013', save.
    after doing this you will be able to find 'equipment' box under allocation.
    and regarding asset synchronization..
    Asset Accounting --> Master Data --> Automatic Creation of Equipment Master -> Specify Conditions for Synchronization of Master Data
    In this step, under the box 'Edit Asset Master Record' mention,
    Create Equipment                 2 Direct Synchronization after saving
    Change Equipment               2 Direct Synchronization after saving
    Make sure you do not have any other field 'required' in equipment creation and not assigned to asset field.
    After doing this you should be able to get equipment created automatically..
    Regards,
    Sayujya

  • Facing Problem in creation on Customer Master Record with reference

    Dear SAP Experts,
    I am making a New Customer master record with referenec to existing one. Account  Group """ Stock Transfer - Depot""" do not use internal no assignment, we put external no to customer code. but when we enter the customer master with reference to existing one, system shows the error.....enter a no between A001 and Z999.
    Customer Record Details-
    Account Group - Stock Transfer Depot
    Customer - 1101
    Compnay Code- 1000
    Sales Organisation - 1000
    Distribution Channel -20
    Division - 01
    Reference:
    Customer - 2001
    Comapny Code - 2000
    Sales Organisation - 2000
    Distribution Channel - 20
    Division - 01
    Error: ENTER A NO BETWEEN  A001 AND Z999
    I m not getting why system showing this type of error, should i need to configure new customer code sumwhere in IMG if yes please let me know.
    Lokking forward for your quick response on the same.
    Regards
    Parul Deshwal

    Hi Parul Deshwal,
    - The number range is created in XDN1.
    - The number range is assigned to the account group "Stock Transfer - Depot" in SAP Customizing Implementation Guide>Financial Accounting>Accounts Receivable and Accounts Payable>Customer Accounts>Master Data>Preparations for Creating Customer Master Data>Assign Number Ranges to Customer Account Groups
    Remember - If you are entering an external number it generally means the number is created in an external system and replicated to your system.
    Help - Check what external number was used last by doing SE16 on table KNA1 and use the account group "Stock Transfer - Depot" as a selection parameter.
    Best regards,
    Glynn

  • PR, PO, GR for a consumable material without material master record

    Hi,
    I have created a complete cylcle till Invoice Verification for a material without a material master record.
    But i have one query i.e. in the cylce i created i had to create a GR before entering MIRO.  Is there any way by which i need not create a GR for a consumable material i.e. to be posted directly to a GL without any inventory management.
    In my case, the GR checkbox in the PO was automatically ticked.
    Can anyone help on this please.
    Regards,
    Laxmi

    Customizing Error Message in ME23N
    When displaying of modifying Purchase Orders with a document type of Framework Order,  a user selects the LIMITS tab, they get the error message Customizing incorrectly maintained, message number SE729.
    The problem is caused by version upgrades of the SAP software.
    Number of entries in table T162V is different to the number of columns in table control for screen SAPLMLSP (400).  You can use screen painter SE51 to display the screen.  View the Element list for TC_VIEW.
    The list of fields can also be viewed within the program.  Transaction code ML81N (service entry sheet), program SAPLMLSR.  Click on the Configuration button (top right hand corner) select Administrator.  This shows the number of fields as 67.
    Using SE16N to view table T162V shows 69 fields.  This table contains six layouts (variants), they must all be the same.  Before the change the total count was 414 (69 x 6). 
    The ME23N transaction only checks that the number of entries is correct.  You will notice that the fields are not in the same sequence, but that should not matter if you donot use the service transaction ML81N and it is not a selectable tab on ME23N.
    Transaction SM31 was used to delete the extra fields.  As this is a SAP table, you may need extra authorisations to make the change.
    Note:  the number of fields shown above will be different in each site.  This is because of different SAP versions and in what software is loaded. 

  • Solved - Group Fields for Vendor Master Records in IMG

    This was the solution.
    The new field's data element I added to LFB1 did not have the "change document" field checked.  I made that change and now that field shows up in IMG.
    Hello all,
    I added an append structure to the table LFB1.  This structure has 1 field.  I then created a "Modification-Free Enhancement of Vendor Master Record" to add the new LFB1 field to the vendor master screen, edit and display screens.  This is the 3rd time I have done this.  So far so good.
    Now our functional analyst went into IMG to add this new LFB1 field to a "Group Fields for Vendor Master Records" which we have done 2 other times.
    The new LFB1 field does not show up in the list of possible Table-fields.  
    There must be some other step I am missing.
    Does any of this ring a bell?  We are on version 4.7.
    Thanks
    Bruce
    p.s.
    This is the IMG path for adding 'Field Groups' to vendor master fields.
    Financial Accounting/
    Accounts Receivable and Accounts Payable/
    Vendor Accounts/
    Master Data/
    Preparations for Creating Vendor Master Data/
    Group Fields for Vendor Master Records
    Edited by: Bruce Tjosvold on Nov 21, 2008 1:18 PM

    Hi Vandana,
      There are several tables that are contain Vendor Master related data which can be used for extraction to BW. Some of the tables which can be useful for you are:
    LFA1 :  Vendor Master (General Section)
    LFM1 :  Vendor master record purchasing organization data
    LFBW : Vendor master record (withholding tax types) X
    WYT3 :  Partner Functions
    LFBK : Vendor Master (Bank Details)
    LFB1:  Vendor Master (Company Code)
    ADRC: Addresses (Business Address Services)
    ADR3: Fax Numbers (Business Address Services)
    ADR6: SMTP Numbers (Business Address Services)
    ADRT: Communication Data Text (Business Address Services)
    You may use the Data sources mentioned in the previous update from Venky above namely :
    0VENDOR_ATTR --- for master data attributes
    0VENDOR_TEXTS -- For texts
    Since the fields that you are using are from different tables so its better if you go for a Generic Data source where you can use the fields as per your requirement.
    Thanks
    Pawan
    Edited by: pawan190187 on Aug 19, 2011 12:40 PM

  • Change Of Asset Master Record?

    For one of my client, they had created couple of asset master records and posted the depriciation for 6 months.Now auditors suggested they wanted to move this asset master record to another master.already they had posted depriciation also. auditors suggested you are not supposed to show this asset master record conver this asset class. how we want to rectify this?
    Regards
    K.srinivasrao

    Dear sree.kancharla
    Were you properly maintained period control (in AFAMP) here you can Acq. Add, Retirement , Trnasfer. you can maintain (like that, 01/06/06/06
    Regards
    shankar

Maybe you are looking for