Tween problem :S

I'm trying my butt off with this one. I'm loading images in a
movieclip with an xml. There are 2 buttons that I use to scroll
left en right trough the images. Scroll-effect is animated with a
tween class. Now there is a problem when a want to change my XML
file (images). When the tween is active the XML loads but I can't
see the images. I think there somewhene on the _.x of the
movieclip. How can I unload temperary my tween? Or maby there is a
better solution?
allready many thanks!!!

OK, it's pretty easy to get this effect (at least in my Flash CS6 and my computer, it does happen all the time I do the following):
1 - Create new document with large size (let's say HD - 1920X1080)
2 - Create a line that covers about 2/3 of the area.
3 - Convert the line to a Symbol.
4 - Move the line's anchor point to its basis, so its rotating as if it were an arm.
5 - Create another keyframe at frame 30 and rotate the symbol about 1 degree.
Now turn onion skin on and check the inbetweens Flash creates. They are not equally spaced (smooth movement).
This problem seems to happen with both classic and motion tween, trying other methods, the only tool that gave me the desired results were bones.

Similar Messages

AS2 swf problem under AS3 swf (probably Tweener problem)

Hello. I have this problem for a days and it hasn't been soluted yet although I put it on couple of forums. I have 3 files: test.fla, file_as2, file_as3.
The test.fla file is a typical Loader, which loads external swf files and shows them on the screen. After any key is pressed, the swf is deleted from the screen and loaded again.
The file_as2 and file_as3 are the AS2 and AS3 compiled having a simple square animation (6 squares fading in from alpha 0 one by one) animated by caurina Tweener. If the file_as3 is compilated and loaded externally there is no problem (six sqares are fading in, after pressing any key the vanish and appear (loaded) again and again...). But if the swf as2 file is loaded, it shows the squares only once and after pressing any key and loading it again, it doesn't shows it at all.
I guess it's Tweener problem, because when i trace it in AS2 file (onUpdate) it traces only at the beginning.
How it's possible, that AS3 somehow stops all Tweeners in 2nd time loaded AS2 file?? How to fix it?? Sorry for my english, i left a link for these 3 files to find solution. Try it (test.swf) and then change path inside fla to load AS2 file... Thanks for any ideas.
Link to download: http://www.filolozka.pl/zip/file.ZIP

Instead of reusing the same Loader, try loading the AS2 movie multiple times using different Loader instances. Instead of using event listeners like normal, this should be easy to do because you can addChild each Loader instance, and when it is loaded it will automatically play. If you are able to load the AS2 movie multiple times at once and have it work for you, then the problem must be in the way that you removing the old movie, and reusing code to load the movie again.

Tween problems in ActionScript 3.0

Hello!
I'm stuck with my problem and I have no idea what is wrong. I'm making movement of movie clip via creating new Tween in Action Script 3, Flash CS4 and it happens, when I mouse over button in another movie clip. The problem is that movement sometimes work perfectly, but sometimes it gets stuck in middle of movement and continues only if I mouse over again. Here is the code of function of first frame in main scene:
import fl.transitions.Tween;
import fl.transitions.easing.*;
function btnOver(I:Number) {
var tw: Tween = new Tween(somemovieclip, "x", Strong.easeOut, somemovieclip.x, I, 1, true);
Here is how I'm calling that function from another movie clip when I mouse over a button:
function over(eventObject:MouseEvent) {
(root as MovieClip).btnOver(288);
btn.addEventListener(MouseEvent.MOUSE_OVER, over);
I have several motions like this - for each button different variable for x position (number "I"). I also have another movie clip playing at the same time, but it isn't connected with any of movie clips mentioned above.
Does anybody have an idea what is wrong?
P.S.: I'm on Mac with latest flash player and movie works better in Windows - it has less mistakes, but still they happen very rare. Probably the problem is somewhere inside player or something like that?
Thanks!

It looks like the problem is that you only have one Tween instance to work with. If you start one tween and start another before the first has completed, the first one has to stop working because that one Tween instance has to jump over to the new tween that's just been called.
You probably want to set up an individual tween for each button. You might also want to look into using something like TweenLite/TweenMax instead of the built in Flash tweening. Have a look at: http://blog.greensock.com/tweenmax/

Strange motion tween problem

So I have been making an animation to a voice over for a project. Comes in at about 2000+ frames with each animations different "scene" location split into 16 layers.
If I play the entire movie from start to finish my 2nd to last "scene's" motion tweens play really fast and repeat randomly.
If I use a gotoAndPlay to the frame where this "scene" starts the motion tween plays as intended.
The problem "scene" is setup like all my others with the "scene" being in its own movieclip on the main timeline, and then nesting other movieclips inside it. When I remove the tweens from the nested movieclips there is no movement issue, but obviously there is also no movement which I need.
My fix so far has been to add a goToAndPlay on the first frame of the problem "scene", eg "gotoAndPlay(1895); above frame 1895" which plays the tween correctly but makes my audio stutter when it hits that frame. So is not exactly the desired effect.
Note: when I say "scene" I don't mean flash scenes more taking about the different shots/locations of my animation.
I've searched google for hours to try find a similar issues with no success. So really do appreciate any help or ideas from some more experienced flashers

You're trying to have different slices fade in? If you just
want the image,
as a whole to fade in, import it and convert it to a
MovieClip and fade in
the clip.
Dave -
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

Animation Tween Problem - Motion am I missing somthing..?

Screen shots, a simple fly-in, keep move slowly, then fly out, but for some crazy reason Premiere keeps creating a tween that does not exist and adding a bounce that looks pants... this is very, very simple animation it surely should not be doing this, or am I missing somthing, equally I'd love to have motion splines can I switch them on as this would likely fix the issue...
The mistery tween that does not exist...?
The other Keyframe...
If I add an additional manual tween, it just replicates the problem further, so I end up with two bounces I don't want. Any help would be peachy,
Samantha

Well found the linear option etc, right click, but cannot find temporal & spatail, it would just be nice to have a spline on the motion position. To be frank Premiere's behaviour is just being odd in gerneral Ann. It just lost keyframes on the button/Badge element. Well there was none there but the animation still remained uneditable. Going to reload the project, but think it's likely best I pop out to After Effects for the Motion Graphics, or it will drive me bonkers lol

Tween Problem - Can Anyone help

I have two loaded movies loaded into a main movie. I would
like to perform an action in one movie by hitting a button in the
other. Here is the basic setup
var mc_location = _level0.movie_1.my_mc;
import mx.transitions.Tween;
import mx.transitions.easing.*;
btn1.onPress = function() {
new Tween(mc_location, "_alpha", Strong.easeOut, 100, 50,
15, false);
This is the basic setup where I am having a problem. There is
a lot of other code and I would like to store all of it in an
actionscript file for future editing. So I need to store the mc
location in a variable. I have tried also to put the variable in
quotes, so it reads like a string, but then the tween won't read
it, even though a trace will. Any ideas.
Thanks, J-Rad

Correction. I tried to put the path that the variable
represents in quotes. Not the variable itself. All clear? It must
be late.
Thanks again, J-Rad

CS4 AS2 Tween Problem

Hi there,
Wondering if anyone can help with a crippling issue in Flash CS4. In short, the post production company I work for asked me to redesign their website using the version that happened to be hanging round the office- Flash MX (circa 2002). Half way through the project we bought CS4 as the site is quite video heavy and MX isn't really set up for that.
I've opened my mx file in the new version and all has worked well- however a couple of days down the line i'm now having major tweening issues on the pages i've created since upgrading.
When transitioning between scenes (yes i know everyone hates scenes but it seemed right at the time) the classic alpha tweens that fade the new scene in seem to be 'paused' on the first frame when viewed as an SWF. All is fine when scrubbing through the timeline. As I designed the site and know where the buttons are I can click them, it's just they're not visible.
I've done a lot of reading into this and have seen reports of similar issues with dynamic text elements not alpha tweening properly - but this is all of the layers that have a tween at the start. Sadly i'm really tight on time to get the site done as it's only a side project and i've got work building up.
If anyone can shed any light on the situation I would be very grateful. I can supply the .FLA on request but it's 200mb so it's going to be a bit of a beast to send around.
I've searched for things like 'tween conflict' 'alpha tween not working' 'classic tween error' etc to no avail.
Thanks in advance.
Jon

Hi Jon,
Does this sound like the problem you're encountering? http://kb2.adobe.com/cps/496/cpsid_49616.html
(there are a few workarounds on the page)

CS3 Motion Tween Problem

Hello all
I have been developing a game using flash CS3. It involves a
variety of objects, movieclips, buttons and motion tweens and a
whole bunch of actionscript. The development has been coming along
very nicely and I havent been experiencing many problems, until
now. I was close to finishing the game (with everything running
smoothly) and suddenly, the motion tweens on certain objects have
become broken. instead of smoothly tweening the object flickers
from on position to the next.
This all happened after absolutely no changes had been made
to the game source (.fla) file. What is strange is that even my
previous versions of the game (dating weeks prior to this point) ar
now experiencing the same flickering on motion tweens as in the
current version.
So, I have come to the conclusion that this is the result of
perhaps a corrupt flash settings file. When I log off my PC (with
windows XP Pro)and log back in to the same machine as a different
user, the problem was solved!! horray.... that only lasted for a
day though. Soon the same problem began again under the different
user.
Can anyone help me out?
Thanks for the help,
Codie

My suggestion is to make sure you are using the current
version of Flash Player. If that doesn't work, try finding a legacy
version fo the Flash Player (since it used to work). If the legacy
version solves the issue, contact Adobe and submit a bug.
Personally I've never had such an issue. It is possible to delete
your preferences. If I remember right, they are located in both
your registry and on your hard drive. I don't recall where to find
the things you need to delete, and I remember I had a hard time
finding that information. Sorry I can't be more help.

Classic Tween Problem!

So I made a frame by frame animation of a guy waving and wanted to make the animation a little smoother. So I highlighted all of the frames and clicked create classic tween. But then I get a warning saying "Motion tweening will not occur on layers with ungrouped shapes or on layers with more than one group or symbol. Can anyone help me with this? Or please tell me a way to make my frame by frame animations smoother?

Tweening can only involve one object. If you happen to have multiple separate objects in the frame(s) you are trying to tween it will fail. To do what I think you are trying to do you would need to have the objects being tweened on their own dedicated layers or as sublayers of other objects.
For instance, if you have an arm waving where the hand also moves relative to the arm, then you would want to have the hand be a movieclip within the arm timeline that runs separately from the arm but also remains positioned on the wrist.
To do it with the frame by frame approach you would need to involve more frames into the animation and adjust the frame rate to compensate.

Motion Tween Problem

I'm new with AS3 and am designing a tween that will have 6 or more tweens that loop continuously in a series.
How do I create the stop and go between each tween series, but still in a continous loop? Please view this similar example
Thanks and I'll apprecaite all replies!

Based on what I saw in the example you only have to worry about managing one tween and then create 6 or more of those managed tweens. The general scheme could be you have a tween with a finish listener that sets a timer with a somewhat random delay (between x and y seconds) that upon timing out sets a tween with a listener and so on and so on.

Motion tween problems?

Im completly new to flash so im sure the answer to this is
probably really simple. I need to create a banner/header that has a
changing image. I followed the tutorial on adobe but my pictures
dont blend into the next one they just switch after x amount of
frames. How do I get them to gradually change into the next
image?

Apply a Tween to the next image as soon as it is loaded...
import fl.transitions.Tween;
import fl.transitions.easing.*;
var myTweenAlpha:Tween = new Tween(nextImage, "alpha",
Strong.easeOut, 0, 1, 3, true);
where:
nextImage is the new object that loaded
0 is the alpha value starting
1 is the alpha value ending
and 3 is the time to do it in (sec)

Image Ready Flash Tween Problem

I have created a SWF in Image Ready that previews correctly, but once uploaded the motion does not fade from one to screen to another - it is a cut. I previewed it in Firefox and Explorer. I am on XP.
I am on CS2 (I am cheap). Here is the current test link. http://operahousegourmet.com/index-hotflash2.htm Here is a link to the current page I made the same way. http://operahousegourmet.com/
Any help would be fantastic.

Thanks to all who read this - I finally figured it out.
At least how to resolve this one. The files were set up in groups with multiple layers. Image Ready/Dreamweaver was not having any of that. Once it got into Dreamweaver it ignored the tween commands. I created another PSD file and flattened all the layers. Tried again and exported as preserve appearance and lossless 32 with rasterized fonts and it works.

Symbol Shape Tween Problem

Hi,
This is my first post on the Adobe Forum. I think this is the right place for my question;
I have a character. The character is a symbol, within that symbol, the character is composed of more symbols.
Character Symbol-
                    - Head
                         -Glasses
                         -Mouth
                         -Hair
                         -Face
                    -Torso
                    -Leg
                         -Leg1        --This is where the shape tween is taking place
                         -boot
the shape tween only shows up when I am looking/in edit mode of the 'Leg1' symbol.   The animation does not display unless Leg1 is in scope....
Is there something obvious I am missing?

I just realized symbols cannot contain Shape Tween.

Rotation tween problem in CS3

Hey guys! I made this dude and have been trying to animate
him, (this will be my first) I'm trying to tween the leg rotations
by selecting the leg and rotating it o a diferent keyframe but when
I make it a motion tween like some of the tutorials say when I play
it back it just moves the leg, arms, etc. it doesn't rotate them
the way I MADE it in the other keyframe...
p.s. I put all the diferent body parts in diferent layers
Thanks in advance!

John Joslin wrote:
... andif that doesn't fix it, keep tapping it!
Thanks for your answer! I tried it and it's all right.

Flash stickman Motion Tween problem

Hi. I tried to create an animated stickman using Motion Tween
between these two frames:
http://img457.imageshack.us/my.php?image=screenshot00001cq1.jpg
http://img457.imageshack.us/my.php?image=screenshot00000nw4.jpg
but when I applied it to the frames look what happened:
http://img266.imageshack.us/my.php?image=screenshot00002kj3.jpg

the center point is different between keyframes. this will
cause drifting. make sure the center
point (Free Transform tool) is *exactly* the same for all
keyframes.
Chris Georgenes
Animator
http://www.mudbubble.com
http://www.keyframer.com
Adobe Community Expert
*\^^/*
(OO)
<---->
X_NRG wrote:
> Hi. I tried to create an animated stickman using Motion
Tween between these two
> frames:
>
http://img457.imageshack.us/my.php?image=screenshot00001cq1.jpg
>
http://img457.imageshack.us/my.php?image=screenshot00000nw4.jpg
>
> but when I applied it to the frames look what happened:
>
http://img266.imageshack.us/my.php?image=screenshot00002kj3.jpg
>

Tween problem :S

Similar Messages

Maybe you are looking for