Flash stickman Motion Tween problem

Hi. I tried to create an animated stickman using Motion Tween
between these two frames:
http://img457.imageshack.us/my.php?image=screenshot00001cq1.jpg
http://img457.imageshack.us/my.php?image=screenshot00000nw4.jpg
but when I applied it to the frames look what happened:
http://img266.imageshack.us/my.php?image=screenshot00002kj3.jpg

the center point is different between keyframes. this will
cause drifting. make sure the center
point (Free Transform tool) is *exactly* the same for all
keyframes.
Chris Georgenes
Animator
http://www.mudbubble.com
http://www.keyframer.com
Adobe Community Expert
*\^^/*
(OO)
<---->
X_NRG wrote:
> Hi. I tried to create an animated stickman using Motion
Tween between these two
> frames:
>
http://img457.imageshack.us/my.php?image=screenshot00001cq1.jpg
>
http://img457.imageshack.us/my.php?image=screenshot00000nw4.jpg
>
> but when I applied it to the frames look what happened:
>
http://img266.imageshack.us/my.php?image=screenshot00002kj3.jpg
>

Similar Messages

Flash cs3 "Motion tweening will not occur on layers with ungrouped..."

I am getting the error message: flash cs3 "Motion tweening will not occur on layers with ungrouped shapes or on layers with more than one group or symbol"
I have only one symbol in the layer, a graphic.
Does anyone know how I can correct the "problem"?
Thanks in advance.
karen.

as the above poster mentioned I am guessing you have more than one object on that layer. you may have created a symbol from a shape and not selected the stroke.. that is pretty common.
to verify what is on a particular keyframe do a "select all" cntrl-a or cmd-a. maybe you will see more than one item selected.
look at the properties panel. if you have only one thing it will note the symbol or it will say "mixed".
perform this test in the first and last keyframe.

Strange motion tween problem

So I have been making an animation to a voice over for a project. Comes in at about 2000+ frames with each animations different "scene" location split into 16 layers.
If I play the entire movie from start to finish my 2nd to last "scene's" motion tweens play really fast and repeat randomly.
If I use a gotoAndPlay to the frame where this "scene" starts the motion tween plays as intended.
The problem "scene" is setup like all my others with the "scene" being in its own movieclip on the main timeline, and then nesting other movieclips inside it. When I remove the tweens from the nested movieclips there is no movement issue, but obviously there is also no movement which I need.
My fix so far has been to add a goToAndPlay on the first frame of the problem "scene", eg "gotoAndPlay(1895); above frame 1895" which plays the tween correctly but makes my audio stutter when it hits that frame. So is not exactly the desired effect.
Note: when I say "scene" I don't mean flash scenes more taking about the different shots/locations of my animation.
I've searched google for hours to try find a similar issues with no success. So really do appreciate any help or ideas from some more experienced flashers

You're trying to have different slices fade in? If you just
want the image,
as a whole to fade in, import it and convert it to a
MovieClip and fade in
the clip.
Dave -
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

CS3 Motion Tween Problem

Hello all
I have been developing a game using flash CS3. It involves a
variety of objects, movieclips, buttons and motion tweens and a
whole bunch of actionscript. The development has been coming along
very nicely and I havent been experiencing many problems, until
now. I was close to finishing the game (with everything running
smoothly) and suddenly, the motion tweens on certain objects have
become broken. instead of smoothly tweening the object flickers
from on position to the next.
This all happened after absolutely no changes had been made
to the game source (.fla) file. What is strange is that even my
previous versions of the game (dating weeks prior to this point) ar
now experiencing the same flickering on motion tweens as in the
current version.
So, I have come to the conclusion that this is the result of
perhaps a corrupt flash settings file. When I log off my PC (with
windows XP Pro)and log back in to the same machine as a different
user, the problem was solved!! horray.... that only lasted for a
day though. Soon the same problem began again under the different
user.
Can anyone help me out?
Thanks for the help,
Codie

My suggestion is to make sure you are using the current
version of Flash Player. If that doesn't work, try finding a legacy
version fo the Flash Player (since it used to work). If the legacy
version solves the issue, contact Adobe and submit a bug.
Personally I've never had such an issue. It is possible to delete
your preferences. If I remember right, they are located in both
your registry and on your hard drive. I don't recall where to find
the things you need to delete, and I remember I had a hard time
finding that information. Sorry I can't be more help.

Motion tween problems?

Im completly new to flash so im sure the answer to this is
probably really simple. I need to create a banner/header that has a
changing image. I followed the tutorial on adobe but my pictures
dont blend into the next one they just switch after x amount of
frames. How do I get them to gradually change into the next
image?

Apply a Tween to the next image as soon as it is loaded...
import fl.transitions.Tween;
import fl.transitions.easing.*;
var myTweenAlpha:Tween = new Tween(nextImage, "alpha",
Strong.easeOut, 0, 1, 3, true);
where:
nextImage is the new object that loaded
0 is the alpha value starting
1 is the alpha value ending
and 3 is the time to do it in (sec)

Motion Tween Problem

I'm new with AS3 and am designing a tween that will have 6 or more tweens that loop continuously in a series.
How do I create the stop and go between each tween series, but still in a continous loop? Please view this similar example
Thanks and I'll apprecaite all replies!

Based on what I saw in the example you only have to worry about managing one tween and then create 6 or more of those managed tweens. The general scheme could be you have a tween with a finish listener that sets a timer with a somewhat random delay (between x and y seconds) that upon timing out sets a tween with a listener and so on and so on.

Simple (?) Motion Tween Problem

I am unable to do more than one transition for a
fade-in/fade-out effect. I'm trying to do a simple transition of 5
different bitmap images, with each fading out, followed by another
fading in, etc... I've tried saving the bitmaps as symbols in the
library. Still no luck.
Any suggestions would be much appreciated.

Saringei,
I'm sure there is a better way to do this (maybe with
actionscript), but you can acheieve this effect by putting each
fade in/fade out in a separate layer. for example, have image1 fade
in and out in layer 1 going from frame 1 to frame 10, then image2
goes in layer 2 from frame 11 to frame 20, etc. Like I said, there
is probably a better way that maybe someone else can suggest, but
I'm pretty sure this will work.
Bob

Problem with motion tweening in Flash CS4

Hi !
I tried to refresh my little flash knowledge -- but I stumbled upon a problem with the new Flash CS4!
When I try to make different blur or alpha effect on one keyframe I got after making the motion tween -- Flash adjust the other keyframe as well (got the same reaction on both keyframes as if it was the same instance of movie clip -- and not as in old flash; the keyframes created separated or independent instances)
The only thing working for me is when I move the movie clip out of the stage on the first keyframe -- and it correctly move its position.
What's wrong?
Kind Regards
Maria Olsen

Hello Maria,
You sort of answered your own question:)
"got the same reaction on both keyframes as if it was the same instance of movie clip"
That is exactly right and is the proper way of looking at new motion tweens. It is one instance of the movieclip for the duration of the tween. It takes awhile to get used to this.
New motion tweens allow you to set up a a very simple tween initially without keyframing ending values / position. Once you start making changes after the tween is set, you are going to have to get familiar with adding "property keyframes". Property keyframes are displayed with those little diamond icons in the timeline. Poperty keyframes allow you to "lock in" certain specific properties at key points in your animation without affecting other properties. With the old classic keyframes, a keyframe placed mid-tween would create a whole new instance of a symbol with all properties (rotation, scale, alpha etc) set in stone for that point in time. The benefit was that you could easily have all properties tween TO and FROM that keyframe if that's what you wanted. Now you can make adjustments to a symbol mid-tween and only specifically adjust a single property. So you can adjust the alpha of an object mid-tween without interrupting say a rotation that you wanted to happen all the way through.
If you simply want an object to move left to right and then you decide it should fade in
CLASSIC TWEEN
-place symbol on frame 1
-keyframe frame 10
-in frame 10 move the symbol to the right
-add classice tween
Ok, that works, now add alpha fade in
-go back to frame 1 and set alpha to 0
-classice tween automatically adjusts alpha from 0 in frame 1 to 100 in frame 10.
-done
MOTION TWEEN
-place symbol on stage
-create motion tween
-playhead jumps to last frame
-move symbol to the right (no need to f6 / keyframe)
Flash automatically adds something called a "position" keyframe (notice the little black diamond)
Ok, that works, now add alpha fade in
-go to frame 1 and set alpha to 0
-test movie
-oops - wrong. As you noted the alpha will stay at 0 throughout the whole tween.
-you need to additionally go to the last frame and set the alpha back to 100
-this will automtically create a "color" property keyframe on the last frame
When just doing this now I noticed something odd as well
As soon as I do the position change and move the symbol to the right, if I try to add the "color keyframe" on the last frame of the tween, I am not allowed to do so. "color" and "filter" are greyed out. I would prefer to lock the alpha at 100 in the last frame while the playhead is in position before setting it down to 0 in frame 1. Oh well.
Seems you are forced to
-go back to the beginning of the tween
-adjust the alpha
-then go to the end and manually bring the alpha back up.
hmm maybe i'm missing something too:)
the best way to do this would be to have the foresight ahead of time to do the alpha
-place the symbol
-alpha 0
-add motion tween
-in last frame move the symbol set alpha to 100 (alpha and position keyframes are automatically set)
So if you do it right the first time, its easy. If not, well.
Keep in mind an object will maintain the properties it has set in frame 1 unless a subsequent property keyframe enforces some adjustment.
If you have have an object that is moving from point a to b to c to d:
If you alter the alpha at point b, the alpha will tween from point a to b, but will maintain the new alpha to c, to d.
If you scale the clip by 200% at point, its scale will tween from point a all the way to point d, NOT just from c to d
To scale from point c to d only, set a "scale" property keyframe at point c (this will lock the objects scale at 100) THEN scale to 200% at point d
It takes a good deal of practice. I found the hard way that you just can't "wing" it. It isn't very intuitive coming from a classic tween approach.
These articles really helped me:
http://www.adobe.com/devnet/flash/articles/motion_migration_guide.html
http://www.adobe.com/devnet/flash/learning_guide/animation/
Take note of the tips on "cntr-clicking" frames and "shift-dragging". You have to really get used to a few keyboard modifiers when editing the timeline.
Stick around the forums. A lot of good info comes through daily.
Carl

How to move a keyframe from a Motion Tween in Flash CS4

I understand that motion tween is a new form of tween in CS 4 however I am unable to move a keyframe within the time line? am I missing something? I would hope I could select the keyframe (diamond shape) and move it around the timeline but apprently Im missing something.. I am not able to do a cut and copy either... is this normal behavior?
thanks
cheers
stephan

Thank you so much for getting back to me so quick. Work is chaotic right now or I would have replied sooner.
Anyway, my lines aren't actually 3D at all. Everything, including the box, are 2D. But that does give me an idea, once I'm more proficient in Flash if I decide to make this animation even better in the future.
I attached a screenshot of my homepage. You'll see a set of lines on the left side that surround a square with Sarah Knouse LeCroy inside. (That square is what I was referring to as a 'box'...probably not a good description.) I want that square to move down to the bottom left corner when you click on Portfolio, Contact or Resume. As it moves, I want the lines to collapse and fold together so that it looks like they're all neatly getting 'packed away' so that all that's left when viewing, say Portfolio, is an empty page with the square down in the lower left corner.
What is the best way to animate those lines in CS4? Most of the lines do not need to stay connected to the square as it's moving so I think I can just do a Classic tween for those. But the 3 diagonal ones DO need to stay connected to the box as it's moving. I was doing a motion tween and rotating/elongating each line in sections but they still didn't match up exactly in some places during the move. When I would try to go back and adjust a position I had set, it would just pop right back to the original position.
The last problem I'm having is an issue with getting this animation to play only when you leave the homepage and click to Portfolio, Contact or Resume.
But don't want to overwhelm so just answer what you have time for! Later, I could attach my main timeline so that you could see what I already have set up.
Thanks so much!

3d motion tween load problem

Hey all,
I'm having a problem which has made me struggling for two days. I hope i can get some new ideas for my problem here.
I created a fla which includes several 3d motion tween in CS5.5, when it's compiled it works perfect. But when i try to load this swf into my main project, images get blurry and distorted. Below is the screenshot of the situation. The first one is the correct one, and second one is loaded into main project. I read that scaling 3d tweens might cause such problems and tried to fix it by two solutions. As first, i tried to retransform the tween by: myContainer.transform.matrix = new Matrix(); but didn't work out. As second, i tried to rescale the stage which mentioned as a solution is some blogs.
And i don't know if it is some kind of bug as mentioned here: http://forums.adobe.com/message/2258767
I'd really be glad if i can get some ideas, thanks all.

anyone?

Can't properly create motion tweens between two keyframes in flash CS4

I'm trying to create a flash animation of a wing flapping using three keyframes. The first keyframe is at frame 1. I then created a second keyframe at frame 5 by pressing F6, and then I created another keyframe at frame 10 by pressing F6. At frame 5, I rotated the wing so that it is going up. Frame 10 is the same as frame 1.
frame 1:
frame 5: frame 10:
I right clicked on a frame between frames 5 and 10 and then clicked the first option, "Create Motion Tween"; I then performed the same action on a frame between frames 1 and 5. When I preview or test the movie, there is no transition between the frames. From frame 1 to 5, there is supposed to be a transition of the wing flapping up. From frame 5 to 10, there is supposed to be a transition of the wing flapping downwards to its initial position. Instead, when I test the movie, the wing remains still until frame 5 and instantly goes to its "wing up state" and when it gets to frame 10, instantly goes to its "wing down state".
Here is what the timeline looks like after I've made the changes mentioned above:
I'm using Flash CS4 to make the animation but the tutorial I'm following is using Flash CS3. I know I can use other methods to create the motion tween but I want to know why the method I'm using isn't working.

I did switch to classic tweening. I pressed F6 to make a keyframe at frames 5 and 10. I then right clicked on a frame between frames 1 and 5 and then clicked
"create CLASSIC tween"; did the same thing between frames 5 and 10. I'm not seeing the transitional frames between frames 1 and 5 that the tutorial showed.

CS5 - problem with motion tween..HELP!!

Experts out there, please help.
I have migrated from Flash CS3 to Flash CS5. Unlike in CS3, in CS5 when i use motion tween i am unable to use multiple 'ease in' and 'ease outs' in a single tween span. The tween span has to be divided by the 'split motion' command at 'properties keyframes' into smaller tween spans to further apply ease in/out to each one of them. This is not the case with CS3, you just select one keyframe after another and apply the ease in/out command, no divisions required.
Lets say i want control the accelaration and deccelaration of a bouncing ball without breaking the tween span. How do I do it in CS5 without wasting all the sweat?
Please guys i really need this
I'll be greatful
Thanks

The classic tween is the same as the old Motion tween was in CS3 and earlier. You can grab a keyframe and drag it along he timeline to extend or reduce the tween.
The "new" Motion tween was invented to allow for 3D tweening and to allow you to save the tween action exclusive of the elements that were being tweened, so that you can easily replicate a tween on the timeline.

Motion Tween Keyframe Problem

In a motion tween, I have an object moving in an arc between
two keyframes. I did the same thing between two later keyframes.
However, in the space between the two animations where nothing
should happen, Flash added it's own animation. The object moves
backward a bit and then back to where it should be. I can't get it
to stop doing that. The motion editor shows an arc between the two
frames but I just want it to stay still. Please help!

The animation side of things is definetly not the focus of what knowledge I have but here goes...
A shape tween sounds like what you want. Create the base shape, and secondary shapes for a gap in each direction you need. After that you setup the timeline into sections for each of the directions and label them, and finally use goToAndPlay to choose which direction to unveil.
Should work, but Im not sure if its the best approach. Hope it helps.

Add motion tween to my buttuns in flash??

hi, i'm new in flash ,i make a simple buttun by these steps
1- i prepare color photo and same in black and white
2- i import my photo to stage - convert to buttun
3- in over , down i put the black and white photo - also write text
4- when i run the movie it seems ok when mouse over it change color and text appear
what i'm trying to to is when mouse over i want the photo to become bigger i try motion tween on over but i cant move the markers!!
please help?? can i do it without action script btw i use flash portable8
big thanks in advance

i try your idea i make movie clip in over then i
make tween it work thanks alot but is the way i do it right

Save motion tween as as3 in flash cc2014

in previous flash i had the ability to save motion tween as as3 and use it an scripting.
i can not find it in flash cc 2014
how can i use motion preset as part of as3 scripting?

i don't know why it was removed, but in general the adobe engineers had to decide which features from the 32bit flash pro (cs) should be added to the 64bit flash pro (cc). and there were time-constraints so the more features carried-over, the long it would take to release cc.
i don't know if it's better to use xml because i've never seen the need to use either feature, ever. in fact, i don't use the flash timeline tweening and i don't use the flash tween class. like many flash professionals, i use a 3rd party library from greensock, tweenlite (usually and lately tweenmax).
and finally yes, cc subscribers can use flash pro cs6: open your cc desktop app>click apps>filters&versions>previous versions>flash pro install>cs6.

Flash stickman Motion Tween problem

Similar Messages

Maybe you are looking for