Two clips that are overlaid creates white line when rendered

In Final Cut Pro 7, I have copied a clip on top of itself in the timeline.
- The clip on top was then moved to the right so that the clip below would be seen slightly ( I needed a way to scoot the subject over while preserving the background on the left side. It is a black and white image over a flush gray background).
- When the clips are renderd, a white vertical line appears between the two clips
- The white line remains when exporting, and remains when it is uploaded to vimeo
- I need it to be gone! It is not there before rendering the timeline, but appears afterward!!!

What happens if you crop the right image a bit more? Does the line show up?
x

Similar Messages

  • Two user id are being created in BO when user is accessing from Window AD

    Hello Team,
    We are facing a problem in BO XIR3.
    1.     Where  users are login BO through Window AD login.
    2.     When users are login two idu2019s are being created in BO for that user.
    3.      One with the same name and another one with appending 0 at end.
    4.     For example if user  abcd login through window AD in BO there will be two idu2019s are created one is with abcd and another one is abcd0
    5.     Here users are already having access to BO thorugh AD aunthtication, 
                         For ex: User abcd is having access to BO through Win AD, but when he is login then one more id is being created with name abcd0 in BO.even the alias name is same for both of the ID.
                          here abcd is already in system abcd0 is being created in BO
    6     For second created id like abcd0 in BO rights are not given so user is not able to login.
    7.     Here when user abcd is login from AD his alias point to second created id in BO(abcd0) and this second id abcd0 is not having access to Bo so users are not able to access BO.
    Can you please let me know why it is happening, what went wrong and where ????
    Your help will be highly apprecaited

    OIM 11.1.1.3 is the version that we installed. USR_PASSWORD is not empty, after BP03 this appears to be a random password. it appears to be generated by oracle.iam.reconciliation.impl.ReconUserPasswordHandler. From the sequence of events it also appears that UserCreateLDAPPostProcessHandler is not getting called.
    password was same as AD username before bp03. it looks like your issue is different in this case.
    Below is the error stack that i see in oim diagnostic log.
    oracle.iam.platform.kernel.EventFailedException: Enabling failed because user SYNCTEST5 is not synchronized to the LDAP directory.
    at oracle.iam.ldapsync.impl.eventhandlers.user.util.LDAPUserHandlerUtil.enableUser(LDAPUserHandlerUtil.java:79)
    at oracle.iam.ldapsync.impl.eventhandlers.user.UserEnableLDAPHandler.execute(UserEnableLDAPHandler.java:143)
    at oracle.iam.platform.kernel.impl.OrchProcessData.runPostProcessEvents(OrchProcessData.java:1153)
    at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:703)
    at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:220)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:674)
    at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:705)
    at oracle.iam.platform.kernel.impl.OrhestrationAsyncTask.execute(OrhestrationAsyncTask.java:108)
    at oracle.iam.platform.async.impl.TaskExecutor.executeUnmanagedTask(TaskExecutor.java:100)
    at oracle.iam.platform.async.impl.TaskExecutor.execute(TaskExecutor.java:70)
    at oracle.iam.platform.async.messaging.MessageReceiver.onMessage(MessageReceiver.java:68)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  • L do not see an orange line in the browser for clips that are in the timeline.  What do I do?

    How do I get the orange line to show in the brewer for clips that are in the timeline.  Mine doesn't show it.

    I called Apple and said it is a glitch which caused me not able to see a registration key. They sent my $30 back so I will make another order of Quicktime Pro 7 to get registration key.

  • Disabling all movie clips that are on lower levels

    Hello
    I have a movie clip that pops up over all other movie clips.
    But it is still possible to interact with these movie clips that
    are beneath the mc that has popped up. Is there any way to disable
    all of the movie clips that are beneath the one that popped up?
    thanks

    Typically the way to do this is simply create a large
    invisible MovieClip which covers everything, and give it a an
    interactive event. I often use:
    on(rollOver){
    useHandCursor = false;
    This way not only does it steal interaction from anything
    below it, it makes it so the cursor doesn't turn into a hand making
    the user think there's something clickable.
    You could also make a loop which checks getDepth() and if
    it's below a specified depth, set enabled = false, but there's
    really no reason in doing that.

  • How do i stop two processes that are running in activity monitor

    how do i stop two processes that are running in Activity Monitor took one out of trash and it says preparing to move desktop still running with another one been running for hrs now want to stop these many thanks jen.

    Select each one and Force Quit it.
    But be careful there are many processes that are run by the OS that if quit will cause problems possibly even crash the system.
    regards

  • TS1292 There are two numbers that are not visible in the middle of the code What can I do?

    There are two digits that are not visible in the middle of the itune code. How can I still access this card?

    Click here and request assistance, supplying as much of the code as you can.
    (74408)

  • Editing a movie that was already cut together without transcoding .h264 footage to proresslt. I want to transcode full clips that are used in the edit, but not any of the leftovers.

    Editing a movie that was already cut together without transcoding .h264 footage to proresslt. I want to transcode full clips that are used in the edit, but not any of the leftovers. Is there an efficient way to this?
    I'm thinking I can convert the files with Compressor and place them in a new folder with their original file names (not sure how to get compressor to do this yet) and then do a major "Reconnect Clip" afterwards.
    Not sure if there's a more efficient way to get all the clips in the timeline to compressor. I want the full files, not a sequence export. I can go through one clip and a time and add the master file. I'd rather not.
    The more automated processes the better.
    Thank you. I'm currently working so I don't have the time to scour the forums. Help or links to help would be greatly appreciated.
    B

    yeah Media reconnect can be an issue.
    Will Media Manager convert files? Another thing I was thinking was to Media Manage the sequence out, copying all the used files to a new folder, and then running that through compressor. But it still leads to a massive reconnect. Fine tuning all those edits would be less involved than re-editing the whole thing, I hope.

  • Cannot compile two classes that are on same package

    When I compile two classes that are on same package one class that is independent of other class gets compiled but the other class which uses
    the first one shows cannot find symbol error with the first class name

    try...
    javac *.java
    that should compile all the java files in that folder at the same time. I dont know if that will fix your problem but it is worth a shot.

  • II am looking for information on iPad and iPhone apps and Mac software that are "top of the line" for academic research. The most current and comprehensive information I have found is dated July 2010.

    I am looking for information on iPad and iPhone apps and Mac software that are "top of the line" for academic research. The most current and comprehensive information I have found is dated July 2010.

    PogoPossum,
    My area of interest is in business and economic history. There is a considerable amount of reading and charting. Until the iPad hit the streets, I only considered stacks of books, journals, and downloaded documents, all marked up with highlighters, underlines, and marginal notes.
    Most of my PC based work involved MS Office, Endnote, and MS OneNote.
    What I would like to do with the iPad and MacBook are the same things (Office, Endnote, OneNote) and add the ability to read and markup all forms of printed materials from books to pdf to webpages.
    I cut my teeth on an iPod Touch and have tried a lot of the note taking and reading apps. Without a camera the standard iPod Notes works for short quick notes and long think pieces. I just emailed the content and downloaded the stuff to my PC. Obviously, I do not want to continue at this "non-integrated" level of work.
    Does this help?
    Dick

  • Change number that are not created earlier accepted for change of BOM

    Hi,
    When i am going to change BOM it gives warning message "Enter change number, BOM has history requirement"
    But my problem is when i put any number in field of change number it is allowing me to change the BOM.
    It should not be accept any number that are not created earlier in the system. It must have to accept change number that is created for the history requirement for perticular material. kindly give your input on this issue.
    Atul

    Hi Atul,
    Please refer the thread ECM-Problem with Change number in CS01 and CS02 Transactions
    Thanks,
    Rakesh J

  • I have two computers that are not working

    i have two computers that are not working with 1 year warranty

    If offering for sale I will give five dollars for the pair. Barring they are not for sale and each have one year of warranty my suggestion is to contact HP Support by telephone about sending the computers to a repair facility.

  • How to unglue clips that are stuck together in the timeline

    I've looked everywhere, I'm sure it's there but I can not find how to "unglue" clips that are stuck together in the timeline.  NOT break apart clip items, but get rid of those pesky things that attach the different levels of video together.  And BTW what the heck are those little claws called?
    Thank you so very very much in advance!    

    You can't move tracks. Everything in the timeline has to be connected to the primary storyline at some point. Each clip that's connected can be connected individually so it's free floating and the connection point can be moved anywhere you want, or the clips can be strung togother and connected at a single point. You can Opt-Cmd-click to change the connection to a new location, but it has to be connected somehow.

  • HT6154 Why can I not send a picture with a text on my iPhone or send a msg to two folks that are on my address book?

    Why can I not send a picture with a text on my iPhone or send a msg to two folks that are on my address book?

    No clue.  you didn't tell us what happens when you try...

  • Photomerge produces white lines when using RAW (PEF) but not TIFF

    I just started using PS CC (Mac, v14.1.2) and tried out Photomerge with a set of 40 (4 rows, 10 cols) raw images (Pentax PEF format), resulting in a 0.3 gigapixel image.
    When I have them stitched by Photomerge, I see fine white lines at the merge points.
    I had enabled all 3 options (blend images together, vignette removal, geometric distortion correction), using cylindrical layout.
    When I first convert the PEFs to TIFFs and use Photomerge with the same options, there are no such white lines.
    An example of the bad output:
    These unwanted lines are, of course, at the edges where the images are getting joined.
    Also, when using only a few images (2x2 or 3x3, or even 4x5), I do not get this effect.
    I noticed that when using less images, the blend masks' edges are not straight - but they are when I see this issue. This suggests that at some point the merge operation gets overwhelmed and switches to a simpler algorithm, which in turn has this "bug" with RAW images, apparently.
    Is this a known issue, and is there a way to get this working right with this many RAW/PEF images?

    tempelorg wrote:
    csuebele, that link only directs me to http://feedback.photoshop.com/photoshop_family, which is clearly not a bug report form but yet another "open" discussion forum, it seems.
    Sigh. How can Adobe charge so much money for their products and not even afford a team of people to look into bugs that users might want to report. Big companies suck.
    Although you were probably looking for a standard developer-type bug report form, you still might want to take a closer look at that site. You'll see numbers next to the topics; those are user votes to help get something fixed sooner. While it's one thing to submit a bug report (and from this thread it seems they might already have it), Adobe uses that site to help prioritize which bugs to fix first, based on the user discussion and votes. Because Adobe has to decide not only whether a bug needs to be fixed sooner than other bugs, but sooner or later than certain feature requests. The user discussions and user votes on that site help them decide, although I'm sure there are other internal considerations.
    In addition to votes, you'll see that posts on that site can be marked "Acknowledged" or "In Progress" by Adobe. The user votes and status reports are what make that site a little more quantifiable than this forum. Also, it isn't unusual to see Adobe developers and employees in the threads looking for more info or explaining things. So while it might not look like a traditional bug database, it's along those lines but in a way that makes it a little easier for non-technical users to participate in the process.

  • White lines when using facetime

    Hi, ive been using facetime lately.. And then i have noticed that there is a white lines in my screen everytime i use facetime.. but it only shows up on facetime screen.. please help ohh and i tried to hard restart my phone, but it was still the same.. im using iphone 4s.

    tempelorg wrote:
    csuebele, that link only directs me to http://feedback.photoshop.com/photoshop_family, which is clearly not a bug report form but yet another "open" discussion forum, it seems.
    Sigh. How can Adobe charge so much money for their products and not even afford a team of people to look into bugs that users might want to report. Big companies suck.
    Although you were probably looking for a standard developer-type bug report form, you still might want to take a closer look at that site. You'll see numbers next to the topics; those are user votes to help get something fixed sooner. While it's one thing to submit a bug report (and from this thread it seems they might already have it), Adobe uses that site to help prioritize which bugs to fix first, based on the user discussion and votes. Because Adobe has to decide not only whether a bug needs to be fixed sooner than other bugs, but sooner or later than certain feature requests. The user discussions and user votes on that site help them decide, although I'm sure there are other internal considerations.
    In addition to votes, you'll see that posts on that site can be marked "Acknowledged" or "In Progress" by Adobe. The user votes and status reports are what make that site a little more quantifiable than this forum. Also, it isn't unusual to see Adobe developers and employees in the threads looking for more info or explaining things. So while it might not look like a traditional bug database, it's along those lines but in a way that makes it a little easier for non-technical users to participate in the process.

Maybe you are looking for