Two comm channels at the PI outbound side
Hi All,
Can we use two communication channels at the outbound side.my scenario is to send a file from database system to SAP. I know that we can use JDBC adaptor at the inbound (PI receiving side) and FILE adaptor at outbound (PI sending side). at the same time when we dump the file onto SAP application server , i need to send workflow notification to relavant department agent informing about the file location.
Could anyone tell me how we are going to configur this scenarion.
Regards
Sre.
>
sre wrote:
> Hi All,
>
> Can we use two communication channels at the outbound side.my scenario is to send a file from database system to SAP. I know that we can use JDBC adaptor at the inbound (PI receiving side) and FILE adaptor at outbound (PI sending side). at the same time when we dump the file onto SAP application server , i need to send workflow notification to relavant department agent informing about the file location.
>
> Could anyone tell me how we are going to configur this scenarion.
>
> Regards
> Sre.
so your scenario is
JDBC -> FILE & WORKFLOW Notification
The answer is yes. you can add as many receivers and its corresponding communication channels.
One question, how do you want to send the WORKFLOW Notification?
Similar Messages
-
Hi,
My Scenario is RFC-XI-JDBC. I created one Message Interface, synchronous, abstract, and did the Interface mapping.
I created sender comm channel, receiver comm channel. I configured Sender Adapter(RFC) and Receiver Adapter(JDBC).
I have a little confusion, do I need another two comm channels and another two sender(jdbc) and receiver(RFC) adapters.
Thanks for the help.Hi Raj,
As your scenario says that you are making use of sync communication. Using the same sender and receiver channel the request and response comm is handled. While you create the outbound interface you check the option of msg interface type as sync.
So bottom line is you dont have to create two seperate channel to get the response from the JDBC adapter.
Hope this answers your question.
Regards,
Ajay -
Seeing old deleted comm. channels on Non-Central Adapter Engines
hello,
We have a landscape of PI 7.0 machine connected with 3 Non-Central Adapter Engines installed on another machine, which generally works fine.
Somehow, after doing a lot of changes in the integration directory (creating and deleting object: scenario, comm. channels and ect...) - two of the non-central AE shows comm. channels which were already deleted (and activated ofcourse) in the integration directory.
What i tried already:
run CPACache in mode=full on each of those AE, clear SLD cache and even restarted those J2EE instances. but it didn't work out. the thing that is also weird is that I can start/stop those old comm. channels. how do we get rid of those old channels?
I would appreciate any suggestions .Problem is solved.
In integration directory we could not see the old comm. channels under the objects tab or under any scenario, but they existed as shown in RWB.
From CPA cache we picked up the comm. channels object IDs and search for it in integration directory UI, once they were found - it was easy to actually delete them.
What went wrong?
These old comm. channels were assigned under deleted services which were under deleted parties. For some unknown reason, after deleting the services and parties successfully, the comm. channels underneath were not deleted and could not shown in any of objects tab GUI tree's nodes.
We could not reproduce this behaviour. -
Hi,
We have XI 3.0 that has been running without issues in the comms channels for a long time.
All of a sudden on one of our systems we are getting an error when starting the comms channel. The stacktrace is shown below:
Channel error occurred; detailed error description: com.sap.aii.adapter.jms.api.connector.ConnectorException: Error creating message consumer: javax.jms.JMSSecurityException: Not permitted
at com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildMessageConsumers(ConnectorImpl.java:446)
We have tried resrting the J2EE engine, the whole XI instance, etc. and still this one channel continues to fail.
I have tried creating new channels and they fail too.
Has anyone seen this error before? Any idea how to resolve this?
thanks
BrianHi Brain,
It is showing security exception, so it is related to the credentials (may if you use the passwords or certificates those are expired) so check those credentials validity.
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/f5/2f2c4142aef623e10000000a155106/frameset.htm
Regards
Ramesh -
Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels.
For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one ..
Thank you for your attention.
AnnalisaDon't understand what you writing here. Screen shoots would be most helpful.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc. -
BPM - Message has error on the outbound side
I get this error 'Message has error on the outbound side" . I am using IDOC - BPM - JDBC. I checked SXI_CACHE and I see ret code 99 for this Integration Process. I tried to activate it. I see an error saying that ZCUST_NUMBER is not a component object of PAYLOAD. I have this context object defined on the Abstract Message Interface built to store the IDOC.
Any ideas are helpfulMichael,
<i>The program outputs a returncode = 99 during the cache refresh of an integration process (ccBPM), with an error message that says that 'xxxx' is not a component of the 'PAYLOAD' data object.</i>
If you are getting the above error, check OSS NOte 890760 -
Comm Channels are not seen in the Communication Channel Monitoring in RWB
Hello All,
I am facing a strange Problem. In the RWB i am not able to see the Comm Channels that i have configured in the Integration Directory. In the Adapter Monitoring also I am not able to see the Adapters with Green Status.
I am on PI 7.0 and SP9. For a simple IDOC to File Scenario, the IDOC is getting sent but the File is not getting written. I have to monitor it for this. As the Comm Channels are not showing so I am not able to Montitor.
Can anyone please suggest me how to do this montoring and how can I see the Comm Channels that I have created.
Thanks in Anticipation
Best Regards
Chakra and SomnathHi,
1. Check created the Busieness system to identify your XI System.
Role of Business system : Integration Server
Pipleline : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
2. In XI Tcode : SXMB_ADM
Role of Business system : Integration Server
Pipleline : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
3. Go to SXMB_ADM
Execute Integration Engine and Configuration
Click on Check button check the SLD working fine or not.
Regards,
Venu. -
BPM : Message scheduled on the outbound side
Hi
I have messages in SXMB_MONI that have been received into my BPE. They have a status flag ok (chequered flag ) but the Outbound Status is green (message scheduled on outbound side).
The BPE would have finished by now ...been in Message Scheduled on Outbound side for the entire day now.
What has happened ? I have no error - nothing !
(there are no entries in SMQ2, nothing in SXMB_MONI_BPE in error etc etc or Short Dumps)
Please help.I posted an OSS note on this - so answer from SAP.
Solution is to delete the old entries via RSWWWIDE report (which could also delete work items that do not have a final status.) I ran this for everything not COMPLETED.
When I send another message in - it worked fine. So the fact I had a stalled WF a week ago was affecting any new one coming in.
Drilling down into the message in SXMB_MONI from the PE I could see an Exception Handling in the MergeandSendBlock - no error given - but it did have a time of a week earlier.. anyway then in the ST22 Dump I could see wf-batch with runtime error MESSAGE_TYPE_X_TEXT.
I feel this is very poor design on the BPM processing ! oh well.
See also
#Note 836092 - Archiving/deleting work items in the XI
PS Thanks to Sudhir earlier on... You nailed it - but at that stage I did not know what you mean so did not consider this - as I had no idea what affect running that transaction would do. -
Errors on the Outbound side?
Hi All,
Iam working on SOAP to IDOC scenario....when i tired to test the interface from RWB> component Monitoring-> Integration engine---> test messages.
i can see in the Moni, the error in Outbound status.....data is not passing to ERP system.
i follwed the blog and done the same as mentioned in the blog.....now problem is when i go to SWWL transaction i cant see any entries in that. Please help in this.
Blog i followed : http://www.riyaz.net/blog/xipi-dealing-with-errors-on-the-outbound-side/technology/sap/9/
Regards,
Chinnawhen i go to SWWL transaction i cant see any entries in that
are you using a ccBPM? SWWL is used when a BPM entry in error needs to be deleted....the blog does not open for me.
when i tired to test the interface from RWB--> component Monitoring---> Integration engine---> test messages.
Did you try testing the scenario from SOAP Test Tool? -
My email only display the list of mails in my in box with a preview of the first two lines of the body of the message. When one clicks on the message to open it, only the header is displayed in the right hand side of the screen - the actual message is missing. This happens on older mail previously downloaded that use to work properly as well. Any idea how to fix this?
Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
What is the name of the small part that comes lose when you are removing the two battery screws on the left side of the battery, the small part is under the top screw when removing the iPhone 4s battery?
It's the part that means you've voided your warranty and the right to get an out-of-warranty replacement from Apple.
-
I have two e-mail addresses and on the left hand side in mail if i expand the sent box one account has an exclamation mark appeared and some mail has deleted it's self??
You can continue to use them as Apple ID's, change the rescue address (as you know)
You can use your iCloud address, but it won't be an alias, it's a full email address. -
My movies' audio isnt 5.1 as the description says. when I check out their info it says they are 2 channel. I have tried with two movies already and the audio description said Dolby 5.1
Actually, try this instead. On the apple tv, under settings > Audio > Dolby digital
Change it From AUTO (default) to ON
That worked for me. All my eyetv encodes have stereo and 5.1 tracks. For some reason the auto option forces stereo. Setting it to ON forces the 5.1.
Everything sounds nice again! It's just stupid that apple puts AUTO for the default and that setting results in stereo not 5.1. -
I have only had my mac one month and it seems while I use Skype the screen freezes and I cant click on anything and everything on the right hand side of the screen shifts to the left and the left to the right with a back block down the centre and sometimes lines running down the screen over all. As it is almost brand new should I be going back to store to get this problem fixed??
Yes. You are still under warranty. Why waste it?
-
Two out of 16 channel of the AT-MIO-16-​E1 are not working
Hello!
I'm here again with a question. I greatly appreciate
the help i previously got from you guys. I was trying
to acquire analog signals from the AMUX-64T using
AT-MIO-16E-1 DAQ and the labview. Everything was going
perfectly, but few days ago, the first channel of the
DAQ board (ch: 0) and last channel (ch 15) are not responding. When I'm putting
signal to the AMUX channel 0-3 which are corresponded
to the DAQ channel '0', the Labview cannot show the
signal. For all other AMUX channels (except 60-63 which are corresponds to the last channel ie. ch:15 of the DAQ) the input analog
signal can be shown in the labview. Could you please
give me some insight what's actually happening. I
sincerely thank you
for your time and effort.
AhadHi ahad,
The best way to move forward is to identify which module in your
system is causing the problems. What I would do is:
1) Check to make sure it is not your DAQ card. You can do this by
applying the 5V reference from the card to channel 0 and make sure
when you test channel 0 in Measurement & Automation Explorer you read
5V. To measure the value, you can use the Test Panels for your
device.
2) You can also run the online E Series Diagnostic Utility to
determine if you have a problem. It requires NI-DAQ 6.9 or higher and
Internet Explorer 5.0 or higher. Here is the link:
http://www.ni.com/support/selftest/default.htm
3) If your DAQ board passes those tests, then it is not the DAQ board.
The next thing to check is that your cable and pins are not the
pr
oblem. You can use a multimeter to check for continuity on the
cable.
4) Move the channels you were measuring from channels 0-3 to channels
that were working correctly. If you notice that the problem follows
the move then it is morelikely your circuit or device that you are
testing. If the trouble is still on channels 0-3 then it could be the
AMUX-64T.
5) Check the wiring to the AMUX-64T to make sure no wires are loose.
It could be that those paths internal to the device have been damaged.
What I would do is put a battery or some known voltage source on one
of the channels and scan through all the channels to see if you can
still see that signal. If you can't then, the board might have been
damaged. If that is the case, then you will have to request a repair
on the board (ni.com/ask).
Anyway, hope that helps. Have a good day.
Ron
Applications Engineering
National Instruments
Maybe you are looking for
-
Display Window on printer is not legible. I cannot read what the level of ink cartridges is.
-
Down load music from my computer to my i pad mini
copied my personal music to i tunes and genius library. can't get them to load to my i pad mini. would be thankful for all the help i can get. thank you Ethel
-
Hiding files of windows partition
Hi Guys, I've just installed bootcamp on my macbook but i'm getting fed up of searching through all the .ini and other system files in my windows partition when browsing my windows files. It also look quite ugly as well! Does anyone know how to hidin
-
Restrict use of multiple purchase groups in PR
Hi All, How to restrict use of multiple purchase groups during creation of Purchase Requisition Thanks Diwakar
-
I have an iphone 4s and there is a prompt that shows the itunes icon and a connection cable i plugged it in and itunes is saying im not connected to the internet but i am....any help out there???