Two DB2 software installation on the same server

Hello,
Do you know if it is possible to have two separate DB2 software installations on the same server (OS is AIX)?
Thanks,
Florin

Hello Florin,
On V8 there is the possibility to use different FixPak levels when using the Alternate FixPaks provided by IBM.
SAP allowes you to use the Alternate FixPaks in your test environment, but NOT in production.
Here is the remark from OSS note 101809:
Remarks on "alternate FixPaks"
    o DB2 Enterprise Server Edition (ESE) Version 8.1 for UNIX-based operating systems now supports the coexistence of multiple FixPak levels on the same system through the use of "alternate" FixPaks.
    o On details on this feature please refer to official IBM Web sites.
    o "Alternate FixPaks" are not supported by SAP. Their use should be restricted to testing purposes.
This is the link to IBM's website:
http://www-1.ibm.com/support/docview.wss?rs=71&context=SSEPGG&dc=D600&uid=swg21112119&loc=en_US&cs=UTF-8&lang=enclass=
Please keep in mind that if SAP requires a special build for a certain FixPak there would be no Alternate FixPak which contains the same fixes and therefore you cannot use it at all. OSS note 101809 contains the necessary FixPak information.
Regards,
Joachim

Similar Messages

Two sap enterprise portal in the same server

Hi,
We have installed a SAP Enterprise Portal on a linux server, all ok!!. but now we want to install another SAP Portal in the same server with the same ehp and same sp, but diferent url, is it possible? and we have something in mind when we began to install it..
e.g. diferents ports or diferents database SID to avoid errors.
thankssss

Hi Carlos,
SAP Software in general is flexible regarding this requirement.
A SAP ID identifies the system, and the Instance ID is related to the Portnumbers that are used...
So lets say you have an:
- host called "linuxhost1" and
   - you installed a SAP system "AB1" and
      - the CI is 00 and SCS is 01
then you can install multiple additional installations for example
- host called "linuxhost1" and
   - you installed a SAP system "AB2" and
      - the CI is 02 and SCS is 03
etc etc..
As long as your host has enough resources you can fill it up...
The instance numbers you chose are reflected in the portnumbers. So in my example above the AB1 portal is called by http://linuxhost1:50000 and AB2 portal is called by http://linuxhost1:50200...
So in other words the instance number of the CI is used in the portnumber of the java instance (5NN00).
The above info is also spread among different SAP installation guides, and SAP help pages.
Cheers,
B

Can I install two versions of NW in the same server?

I have BW installed in a server running on Netweaver 7.3. but I need to install Netweaver 7.02 to do some tests, is it possible to install this other version in the same server? or will there be conflicts after the installation of the second version?
Thanks in advance,
Luis.

HI,
sapinst detects existing instances, and makes sure that you dont use the same instance numbers => same tcp ip ports for diferent sap instances, wich would cause conflits.
so in the limit you can install any number os sap systems on the same host, given you have enought hardware resourses.
best regards,
Ricardo Caramona

BI and ECC 6.0 installation in the same server

Hello SAP Experts,
I am given a task of installing BI 7.0 and ECC 6.0 in the same server. Can someone suggest me of what are all the Do's and Don'ts in this scenario and what is the hardware requirements.
Thanks & Regards
Vanitha

Hi,
For installing BI, you have to install Netweaver.
You already have ECC 6.0 in the System.
As a part of BI system, you will be extracting data from ECC Ssytem and loading in BW System.
Hence if your requireement is like data is loaed in the the BW System every one hour, it will slow down the ECC System.
In future you may need to do some OS patch update, database patch update which is not required in ECC, but it will effect both systems
I have not seen any scenario where OLTP and OLAP System are in the same box
But if you are just doing for learning purpose and you are doing it in your sand box , that should be fine

How to redirect the clients software updates to the same server but different IP?

Hello Everyone,
Well our Mac expert left the company and I got promoted to take his place. I only have about 7 months experience in the Mac world and I have about 90 Macs in the company. Anyways, our company moved into a new building and the Mac server was moved which I am sure the IP address changed. The server is up and running now, but the clients cannot see it and are not allowed update their software. I didn't change any paths or settings to the server, so I am guessing it has to do with something of some IP changes. The Network team set the static IP address up for it so I could connect to it with Remote Desktop just fine. Any suggestions to a Mac rookie?
Thanks

If your clients can't find the software update server (SUS), then either the server changed DNS names and thus your CatalogURL setting is wrong, or the server was moved to a new address and your DNS services were not updated (or the DNS updates haven't propagated through all the caches quite yet).
To see the current DNS setting for the server your.software.update.server.example.com (and replace that intentionally-bogus DNS name with the DNS name for your software updare server), launch Terminal.app (Applications > Utilities) and issue the command:
dig +short your.software.update.server.example.com
and see if you get the IP address that you expect, or the old IP address, or some other address.
Software Update CatalogURL
The usual way an OS X client configures the local (target) software update server is via a plist setting:
$ sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL http://your.software.update.server.example.com:8088/index.sucatalog
To view the current CatalogURL setting from the plist:
$ sudo defaults read /Library/Preferences/com.apple.SoftwareUpdate CatalogURL
Details of the catalog URL setting needed varies by the version of the OS X Server; the above is for fairly recent servers. Google or Bing or DDG for the string:
/Library/Preferences/com.apple.SoftwareUpdate CatalogURL
for details on this, or check the Apple doc (see below) for details.
Background / Resources / More
Take the time to download and skim through the 10.6 Apple OS X Server 10.6 manuals (search for Mac OS X Server 10.6 to narrow what's posted); there's a lot of good information in those Apple documents, particularly given that the documentation for the more recent releases of OS X Server have gotten rather thinner. You'll find additional details of setting up software update services in those 10.6 documents; in the system imaging and software updates manual.
Also see the archives of the Mac Enterprise mailing list for related information and discussions, as well as details on tools such as Reposado.

Two different 10g installations in the same box

Hi,
I installed oracle 10.2.0.2 and 10.2.0.4 in the same box, using different paths as ORACLE_HOME, but the same user... I am gettin this errors when trying to create an instance:
hu Feb 12 10:31:29 2009
Errors in file /oracle10/app/oracle/admin/SIDBDPR1/bdump/sidbdpr1_ckpt_29994.trc:
ORA-07445: exception encountered: core dump [kgskhighthreshold()+72] [SIGSEGV] [Address not mapped to object] [0x0000001F6] [] []
Thu Feb 12 10:31:44 2009
Errors in file /oracle10/app/oracle/admin/SIDBDPR1/bdump/sidbdpr1_pmon_29984.trc:
ORA-00469: CKPT process terminated with error
Thu Feb 12 10:31:44 2009
PMON: terminating instance due to error 469
Instance terminated by PMON, pid = 29984
Wonder if this error could be a consequence of the /usr/local/ssl/lib/ files update... I first installed 10.2.0.2, then 10.2.0.4, and I am using 10.2.0.4 to create the instance.
Thanks!!!

ISSUE CLARIFICATION
===================
-- Problem Statement:
CKPT crashed with ORA-07445 [kgskhighthreshold()+72] during CPU count dynamically.
ISSUE VERIFICATION
==================
Verified the issue referencing data collected records as DC#1.
CAUSE DETERMINATION
===================
The issue matches exactly Bug 7172531 as I mentioned based on the error, symptom and call
stack.
CAUSE JUSTIFICATION
===================
- Same erorr : ORA-7445[kgskhighthreshold]
- Same symptom : CKPT crash during cpu count change
- Same call stack : gskhighthreshold kskcpucc ksbcpu_mod kspptval kspset0
PROPOSED SOLUTION(S)
====================
Apply one-off patch for bug 7172531 on top of 10.2.0.4.
PROPOSED SOLUTION JUSTIFICATION(S)
==================================
Note 7172531.8: Bug 7172531 - Dump when CPU count dynamically changed
SOLUTION / ACTION PLAN
======================
-- To implement the solution, please execute the following steps::
Apply one-off patch for bug 7172531.
KNOWLEDGE CONTENT
=================
Note 7172531.8: Bug 7172531 - Dump when CPU count dynamically changed
Email Update button has been pressed: Sending email to [email protected]

Two Boot Camps installs on the same Mac Pro?

Is it possible to install two Boot Camps on two different internal drives on a Mac Pro? Can I rename the Boot Camps disks to, say, BOOTCAMPXP and BOOTCAMP7? Will this confuse the startup disk system preference in OS X or the Boot Camp control panel in XP and Windows 7?
I would really appreciate any help here.
Steve

Hi,
first: be sure to have/make a backup of what you have now.
second: have a look at the instructions here http://www.harbar.net/articles/mbptb.aspx
The order you need to do the installation/partition is this:
Mac OSX, Win XP (instead of Vista), W7 (instead of Windows 2008 server) (as used in the linked article).
Good luck
Stefan

System copy of a DEV system on the same server

Hi experts!
In our company, we have a 2-systems landscape, DEV and PRD, and we are working on the system together with another organization of the same company. Now, they want me to "split" the systems, one for each organization, making a copy of the systems. In other words, they want to completely split the systems, running on the same server, development server will have 2 systems, DEV and DEV' and so on in production server.
The doubt is in developments, as I don't know how to face the CTS and TMS setup to provide 2 different development environments, without losing the actual change requests for both systems. As you know, I have to change the SID, because the copy will be in the same server, so what happends with change requests?? Do I have to make a copy of DIR_TRANS and set up a new DIR_TRANS for the new system???
Thank you in advance!
Fran.

Hi William,
I guess I did not explain it properly.
Now we have:
1. System DEV in DEV server.
2. System PRD in PRD server.
Transport later ZDEV from DEV to PRD.
And we will do:
1. Homogeneous system copy from DEV to DEV' in DEV server, so we will have DEV and DEV' on the same server.
2. Homogeneous system copy from PRD to PRD' in PRD server, so we will have PRD and PRD' on the same server.
Sizing is good, servers are very powerful.
The doubt is configuring the TMS, as we will have two different development environments on the same server. How do I have to set up the TMS properly???
Thanks!!

CNR: Two cnr instances in the same server (lab environment)

Hello, we are trying to install two cnr 7.2 intances on the same server in order to replicate in lab the real environnment (failover local cluster) without deploying two servers.
I've seen on the installation guide that installing both a local and regional server on a single machine is supported, but what about two local servers working as a failover pair?
up to date, we've managed to install both installs, the dhcp servers are configured for using different interfaces and web gui are listening in different ports. scp ports have been changed (1234 and 4321 ) and, on dhcp-server expert configuration: failover-remote-port and failover-port are configured to be different (677 - 678 in one , and 678 - 677 in the other)
We can manage both servers from DHCP - failover configuration, as they show up and running, and even see logs... The other configs are
When trying to syncronize we get the error
"ChangeSet list is empty."
is this configuration supported?
best regards!

user10127912 wrote:
Hi,
We are planning to install second instance of Oracle 11gR2 in Linux server 2.6.39-400.21.1.el6uek.x86_64 x86_64. This is something we never haven done before. If you have such experience, please give us some insight.
The existing instance has all the standard ports:
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Enterprise Manager Console HTTP Port (pterpdb02) = 1158
Enterprise Manager Agent Port (pterpdb02) = 3938
What ports should we select for second listener and enterprise manager? Is there anything else that we need to know before we install the second instance?If you want a second database instance, no additional installation is required - as long as you want to run the second instance at the same version as the the first. Just fire up dbca and create the second database. One installation of Oracle (one ORACLE_HOME) is capable of supporting many database instances, though the same may or may not be said of the hardware it is running on.
As already said, one listener is enough. One listener, running from one oracle home, using the default name of LISTENER, running on the defualt port of 1521, is quite capable of -- indeed, WAS DESIGNED TO, supporte multiple database instances of multiple versions running from multiple ORACLE_HOMEs.
One instance of dbcontrol/dbconsole will support only one database. If you do not use Grid Control (extra installation, extra license) you will need to use the emca utility or one of the options in the dbca utility to configure a seperate instance of dbcontrol for each database. Don't worry about the ports, the creation utility will take care of it and report what it does.

Two Communication Server in the same Server ?

Hi All,
do you know which are the steps and recommendations to install TWO Communication Station in the same server (Windows 2003) ?
The first one is connect to CRM develop system, and the second one to the CRM Quality System.
Regards,
Davide
[email protected]

Hello Davide,
Note 503340 is not valid for 5.0 and above but its major points are still true:
1. Only one default destination can be setup in the DCOM Connector
which is used by the mobile clients after the installation.
2. Only one default COM4ABAP instance can be setup on the
communication station. This COM4ABAP instance is started
automatically after reboot.
DCOM Connector is now .NET Connector and COM4ABAP is now NET4ABAP in 5.0 and higher.
Clearly, connecting to TWO (or more) CRM system has two parts:
a.) For Data Transfer with Conntrans. You can configure A SINGLE COMMSTATION INSTANCE to communicate with MULTIPLE destinations by just adding destinations in the QmtCnfg tool on the CommStation. You can then specify this Commstation and the destination value as you created in the QmtConfg tool on the client and data transfer will work.
b.) For changing passwords of Employees in Tx: SMOEAC. This uses the NET4ABAP service running on the CommStation which is called by the CRM Server. There can be ONLY ONE NET4ABAP service running on a CommStation and this connects to ONLY ONE CRM SYSTEM at a time. Hence it is not possible for one NET4ABAP service to serve multiple CRM systems.
If you need both a and b, it is not possible. If you need only a, it is possible and detailed above and also in the CommStation installation guide.
I also believe you have a message running with SAP Support on this same issue and you would have gotten the same details from them.
Best Regards,
Ankan

How can i deploy two different versions of the same application on the same server??

I have two different versions of an application. One is a released version. And another version under development. I need to port this version of the application to the same server. I'm using the same classes and packages(except for some new ones). Is it sufficient if i change the name of my ear(application name). Or should i change my code also.

Hi
You can repackage the new versions of ear,jar and war with different names. I hope that should work well.
Cheers
-pradeep

How Can I create a cluster of two instances running on the same server?

Hello,
I can't find how to create a cluster or even a failover rule for my two instances running on the same server ODSEE 11gR1.
Could you please help?
Thanks,

Hello,
Clustering (intended as Sun Cluster, Veritas Cluster, etc... ) IS NOT SUPPORTED since 7.0:
http://docs.oracle.com/cd/E20295_01/pdf/821-1216.pdf [page 20]
and, based on my own experience, is the WORST way of achieving high availability of an LDAP Directory Service and an almost GRANTED way to get replication issues in your topology (lock, split, re-init, etc...).
Please use instead the 'application-level' clustering that you get out of the box with the Multi-Master Replication.
http://docs.oracle.com/cd/E20295_01/html/821-1217/index.html
http://docs.oracle.com/cd/E20295_01/html/821-1220/fhkry.html#scrolltoc
HTH,
Marco

Two clients in the same server--Script??

Hi Folks,
1.I have two clients in the same server say 100(used for dev) 120(used only for testing).I had developed a script in 100 which I want to test it in 120.Now how to move this script in 100 to 120.
2.How to use includes in scripts and what is the usage?
Thanks,
K.Kiran.

<b>INCLUDE: </b>Include other texts
With the command INCLUDE, you can include the contents of another text into your text. The text to be included exists separately from yours and is only copied at the time of the output formatting.With the INCLUDE command, you always get the most current version of the required text, since this is only read and inserted during the output formatting.
Syntax:
/: INCLUDE name [OBJECT o] [ID i] [LANGUAGE l] [PARAGRAPH p] [NEW-PARAGRAPH np]
The name of the text to be inserted must be specified and can have up to a maximum of 70 characters. If the text name contains blanks, then you must put it in quotes as a literal. It can also be specified via a symbol. All further parameters of the INCLUDE command are optional. If they are missing, SAPscript uses default values for them which are based on the respective call environment.
Examples:
/: INCLUDE MYTEXT
The text MYTEXT is included in the language of the calling text.
/: INCLUDE MYTEXT LANGUAGE E PARAGRAPH A1
The text with the name MYTEXT and the language E is included, regardless of in which language the calling text is created. The paragraph format A1 is valid as the standard paragraph for this call.
Optional specifications:
LANGUAGE If a language is not specified, the language of the calling text or the layout set is set for the text to be included. If a language is specified, the text is always loaded in this language, regardless of the language of the calling text.
PARAGRAPH The text to be included is formatted with the style allocated to it. With this parameter, the standard paragraph of this style can be redefined for the current call. All * paragraphs of the inserted text are then formatted with the paragraph specified here.
NEW-PARAGRAPH The first line of the included text has this format flag, provided it is not a command or comment line. If the optional entry PARAGRAPH (see above) is empty, all * paragraphs of the included text are formatted with the paragraph np specified with
NEW-PARAGRAPH.
OBJECT To specify a text completely, you must make further specifications regarding the text object. There are different rules and restrictions for this which depend on the object type of the calling text: All texts can be included in a layout set. If no object is entered here, TEXT is used (standard texts).With a documentation text (object DOKU), you can only include documentation texts. This object is assumed even if no object is specified in this environment. Only hypertext or documentation text can be included into a hypertext (object DSYS). If the OBJECT specification is missing, DSYS is set as a default value.
Only standard text (object TEXT), documentation text or hypertext can be included in any other type of text. The default object is TEXT if nothing is entered.
ID The text ID, which allows further text types within an object, is a further part of the text key. If the ID is not entered, the default Include ID from table TTXID is used for the calling text. If the specification is not in this table, the text ID of the calling text is used.
The ID together with the object are now the basis of a further consistency check:
All text IDs are allowed for a layout set.
Only documentation texts with the text IDs TX (general texts), UO (authorization objects), and documentation texts which have the same text ID as the calling documentation text may be included in documentation texts.
All DSYS texts may be included in DSYS texts, regardless of their ID. Documentation texts to be inserted may only have IDs TX and UO.
Standard texts with all the allowed text IDs, DSYS texts with all IDs, and documentation texts with Ids TX and UO may be included in the other types of texts.
Regards,
Santosh

Installation of EBS 12.1 and Database on the same server

Hi,
Due to resource crunch, I would like to do new installation of EBS 12.1 and Database on the same server where already EBS 12.1 and Database installed.
I have one server where EBS 12.1 and Database installed (Single node installation).
Now I want to create another environment for other purpose (another test env.). But I don't have another server .
So Can I start new installation of EBS 12.1 and database on the same server ?
I have enough space and memory on server.
Are the installtion conflict with each other ? any implications happen on the first environment ?
I want my first environment run fine without any prob., after installing EBS and DB on the same server.
Please guide me.
Regards,
Sanjay Patel

So Can I start new installation of EBS 12.1 and database on the same server ?
I have enough space and memory on server.Yes you can as long as you have sufficient resources.
Are the installtion conflict with each other ? any implications happen on the first environment ? If you install in different ORACLE_HOMEs you should be OK.
Thanks,
Hussein

I have two personal e-mail accounts and a general account that I have synced to my Mail app, but I keep getting emails sent to the non-personal e-mail because they're on the same server. How can I change that?

I have two personal e-mail accounts and a general account that I have synced to my Mail app, but I keep getting emails sent to the non-personal e-mail because they're on the same server. How can I change that?

The only ways I know of for email to get sent to an account are:
1. It was addressed to that account. Someone used that email address to send you the email.
2. It was forwarded to that account by the account to which it had been addressed. I am not aware of Mail having this feature but it is often a feature provided by your ISP that you can turn on by logging into your account via the Internet and setting it up. I assume you have not done this, though.
With several email addresses in the same Mail client, you have to be careful which one you are sending from. If you send from the wrong address, any replies will come back to that same address. I make this mistake all too often.

Two DB2 software installation on the same server

Similar Messages

Maybe you are looking for