Two Fault messages in PI - Error

Hello Guys
My Scenario is Sync SOAP to Proxy. PI will be service provider. In sceanario i have used two fault message and testing the same.
As I was able to use the two fault message and also generated the proxy and coded in proxy method to trigger the Functional Exception but when I test it says no mapping found.
But When I am testing without Operation Mapping and mapping program it work fine. Below is screen shot in last of successful test and response at SOAP client.
I tried with two fault as well as one fault in both the case it fails but in ECC moni the fault is generated but in PI i get two response one with RED and other with GREY status
Attaching screen shot for more details.
Thanks
Vaibhav

For the Grey Message Status , the problem is on the ECC side. Please check the proxy again and please also check the whole process.
There is some COMMIT missing.
Regards,
Hiren

Similar Messages

I have two faults! 1, an error comes up in Ps CC 2014 "could not apply the saved panel configuration, restring to default and my tools have disappeared completely and anything ive tried I cannot get them back not even the drop down menu in 'window' helps

I have two faults! 1, an error comes up in Ps CC 2014 "could not apply the saved panel configuration, restring to default and my tools have disappeared completely and anything ive tried I cannot get them back not even the drop down menu in 'window' helps at all. And 2, Lr everytime I load it up it gives me the option to retry or switch to and it takes a while for me to even get anywhere with it I think it has something to do with the catalogs? I've been using these programs for a few years now on a Mac...no problem but when I use a PC when I'm away coz it's the (only) comp available these happen PC's are so useless! Please can anyone help??...

I can give a few suggestions on Photoshop CC 2014, but Lightroom is a separate forum and you should ask Lr questions there.
First close Photoshop.
Then start Photoshop by double-clicking on it's icon and very quickly after that, hold down the ctrl-alt-shift keys until you see the reset dialog. answer "Yes" to delete settings, and let Photoshop continue to load.
It's tricky to do and may take a few tries, but at least it should reset Photoshop CC 2014 to defaults.
Gene

Fault message with 'Server error'

Hi all,
I have the following problem in PI.
The scenario is a synchronous interface, in which messages are send to PI using SOAP adapter. These are sent by proxy to ECC, and afterwards a reponse message is sent back.
So it's a SOAP-Proxy scenario with a synchronous interface and a request/response message.
I'm testing this interface using SOAPUI.
In PI the request and response messages are processed succesfully, however in SOAPUI I get the following error message (fault message), which is also shown in the communication channel logging.

<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SOAP:Body>
     <SOAP:Fault>
       <faultcode>SOAP:Server</faultcode>
       <faultstring>Server Error</faultstring>
       <detail>
          <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
              <context>XIAdapter</context>
              <code>ADAPTER.JAVA_EXCEPTION</code>
              <text>java.lang.ClassCastException
The fault message contains the error: Server Error.
Does anyone have an idea what causes this?
Thanks in advance any help!
Regards,
Marco

Hi Eng Swee
The audit log doesn't show any errors. The java.lang.ClassCastException erro is shown in the processing details of the communication channel (column explanation)
The last step in the audit log is : "The message status is set to DLVD"
I think steps are missing after this, that sent the response message back to SOAPUI.
I also had a look in a similar interface I've build earlier, in which the additional last steps are:
SOAP: Response message leaving the adapter
SOAP: Processing completed
So for some reason the response message is not sent back from the adapter.
Could this issue be related to the test with SOAPUI and the version used?
The SOAPUI version is 5.0 and the PI version is 7.0
Regards,
Marco

A sample web service to return SOAP fault message for application error

Hi,
I need to test behavior of XI, in case of application error (using <detail> tag in soap:fault) from web service in nosoap mode.
If any one is aware of a free web service, which can raise application soap fault message, Kindly provide the details.
Thanks in Advance,
Rahul..

Hi,
What is the URL to which you are posting the SOAP message?
Is it?
http://<host>:<j2ee-port>/XISOAPAdapter/MessageServlet? channel=<party>:<service>:<channel>
If yes, then like mentioned the QOS is picked from the Sender SOAP adapter.
But, if the URL is ,
http://<server>:<ABAP-port>/sap/xi/engine?type=entry&version=3.0&Sender.Service=<YourService>&Interface=<YourNamespace>%5E<YourInterface>
Then you need to give the QOS as <b>,&QualityOfService=ExactlyOnce</b> appended to the above URL.
More, /people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
Regards
Bhavesh

How to use fault message for error handling.

HI
Anybody has an idea about how we use fault messages to handle errors in XI
Thanks
Debraj

Hi,
Refer this link. This pdf file has descriptions about fault message types and how to use it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4cdfc390-0201-0010-2197-da4ada09f281
Regards,
Uma

Automizing error message with Fault Message Type

(Request F6) (Request F6)
System -
> XI -
>        SAP (Doesn't have F6)
          <-- XI <--
      SAP (Doesn't have F6)
   (Respons: error)    (Respons. error)
(Problem) When the request message doesn't content sufficient information that is required for respons then the XI team will get the message error and the responsibility to solve the problem. In this scenario it is the XI team that sends the error respons to the System.
(Request (eg. F6) ) (Request (eg. F6))
System -
> XI -
>        SAP (Doesn't have F6)
          <-- XI <--
      SAP (Doesn't have F6)
   (Respons: error)    (Respons. error)
(Solution) We want to automatize the process so that the error message goes directly to the System via XI. In other words we only want an acknowledgment of the error in XI, we don't want to solve the error since we believe that it is the sender System that is responsible.
We have seen that there is a Fault Message Type in the Message Interface and we are wondering if that is the way to do it? And it that case, how?

Hi,
Fault message is a error meesage. Its like an exception in simple terms. The fault message is used to
store a log for application error. Fault messages is defined in IR.
To give a overview on Fault messages it is mostly used in synchronous communication. When an error
occurs at the inbound side instead of sending the response message back it sends a fault message back
to the sender system to handle error.
Fault Message are Msg type that provided whenever u create a namespace..they are usually used to get
the exception or error mapped which has occured while execution of Application at the sender/receiver
end....
One scenario where i had used it from Soap to RFC where i defined the exception in rfc source code at
r/3 end...I mapped that exception to Fault msg type that i created of my own type(didnt used the
default)..
Fault messages are used to propogate / send back the error message to the calling application. This is
used when there is a failure and the sending system needs to know what the error was. This is more of
catching Application Errors
check this nice blog also
/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
http://help.sap.com/saphelp_nw2004s/helpdata/en/5d/a45c3cff8ca92be10000000a114084/content.htm
Asynchronus RFC exception handling
XI Alerts are not getting triggered from proxy servers
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ee5bc490-0201-0010-e9b5-
a258cf083bca
/people/sap.user72/blog/2006/01/16/xi-propagation-of-meaningful-error-information-to-soap-client
Fault Message
Regards
Seshagiri
Edited by: N V Seshagiri on Feb 29, 2008 12:19 PM

About Fault messages?

Hi experts,
i have a senario where i have to create fault message,What is the use off fault message........To create the fault message sholud i create complete source structrue in data type of fault messsage.....can any one please send doc's and information on Fault message.
thanks & regards,
Phnani

Hi Phani,
Fault message is a error meesage. Its like an exception in simple terms. The fault message is used to store a log for application error. Fault messages is defined in IR.
To give a overview on Fault messages it is mostly used in synchronous communication. When an error occurs at the inbound side instead of sending the response message back it sends a fault message back to the sender system to handle error.
Fault Message are Msg type that provided whenever u create a namespace..they are usually used to get the exception or error mapped which has occured while execution of Application at the sender/receiver end....
One scenario where i had used it from Soap to RFC where i defined the exception in rfc source code at r/3 end...I mapped that exception to Fault msg type that i created of my own type(didnt used the default)..
Fault messages are used to propogate / send back the error message to the calling application. This is used when there is a failure and the sending system needs to know what the error was. This is more of catching Application Errors.
Also please go through the link below to get the details for fault messages...
http://help.sap.com/saphelp_nw04/helpdata/en/5d/a45c3cff8ca92be10000000a114084/content.htm
check this nice blog also
/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
http://help.sap.com/saphelp_nw2004s/helpdata/en/5d/a45c3cff8ca92be10000000a114084/content.htm
Asynchronus RFC exception handling
XI Alerts are not getting triggered from proxy servers
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ee5bc490-0201-0010-e9b5-a258cf083bca
/people/sap.user72/blog/2006/01/16/xi-propagation-of-meaningful-error-information-to-soap-client
Fault Message
Cheers...
Vasu
<b>** REward POints if found useful **</b>

Error:SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to read request. --- There is an error in XML document (1, 447). --- Input string was not in a correct format.

Hi All,
We have a scenario of FTP-->PI---> Webservice. While triggering the data in the FTP, it is failing in the PI with the below error
SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to read request. ---> There is an error in XML document (1, 447). ---> Input string was not in a correct format.
Can you please help?

Hi Raja- It seems to be a data quality issue.
Check for the value @ 1447 position in the xml message that you are trying to send to web service..
may be a date filed/decimal value which is not in expected format.

BPM Fault Message Exception error !

Hi here is what I am doing
Sync webservice-->Sync webservice call using ccBPM.
This is what I defined in the BPM
1.)Sync rec
2.)Block with Exception handler.
3.) Sync send inside the Block with Fault exception defined.
I defined fault messages for the interface. The Interface works fine when there is no exception but when there is a Fault exception I get the following error in SXMB_MONI_BPE "No exception defined for fault message Faultmessage urn:XXXXX:XXXXXXX ". Exception 8999, Error type 2, Area SWF_XI_ADAPTER Message 81. Variable1 Faultmessage and Variable2 the namespace".
I rechecked my BPM and could see the Fault Exception defined for the Sync send step and it has an exception defined for it too.
I checked SXI_CACHE and the return code is 00.
We are running on PI7 SP13. Did any one face this kind of problem .

Hi there,
I have the exact issue in PI 7.1. Have any of you guys could resolve it? Can you please share your responses.
Thanks.
Anshul

Application ERROR - Fault message Error in Inbound ABAP Proxy !!

Hi Folks,
I have got application error while doing in Inbound proxy scenario. This inbound message is ProductActivityNotification, this message has got fault message. This message is triggering for faults. How to control this fault message or how to divert this error as an alert to RWB. Please give me your ideas step by step. Error as follows:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SAPGlobal20/Global">ProductActivityNotificationFault</SAP:ApplicationFaultMessage>
<SAP:Stack>Application has thrown an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please find the fault message has got following values
<?xml version="1.0" encoding="utf-8" ?>
- <n0:ProductActivityNotificationFault xmlns:n0="http://sap.com/xi/SAPGlobal20/Global" xmlns:prx="urn:sap.com:proxy:RAS:/1SAI/TAS653D9A9CCD9A8EF3AF9B:701:2009/02/10">
- <standard>
<faultText>Proxy Class (Generated)</faultText>
- <faultDetail>
<severity>information</severity>
<text>Start of inbound processing: ProductActivityNotification (ID )</text>
<id>000(/SCA/BIF_PROACT)</id>
</faultDetail>
- <faultDetail>
<severity>error</severity>
<text>Message ID is missing</text>
<id>032(/SCA/BIF_MI)</id>
</faultDetail>
</standard>
</n0:ProductActivityNotificationFault>
Will you please focus bit light on this error message please?
Regards
San

Hi,
Check your Source data is correct or not..beofr executing your scenario execute your inboud Proxy with valid data ,
check below blog...
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
Regards,
Raj

Error handling using fault message type in outbound synchronous ABAP proxy

Hi,
We've a scenario, outbound synchronous ABAP proxy to synchronous SOAP receiver. The requirement is to send multiple records in a single rquest and get response for all the records sent (in the same response message).
Say if I send 10 records from ECC, I should get 10 records as response from SOAP to ECC. But the problem here is, there could be some invalid requests, for which an invalid error status code should be sent as part of response.
Source Structure
Req_Proxy
    req (0..unbounded, string)
Response Structure
Resp_SOAP
Resp (0..Unbounded)
       respString (0..1, String) (carries the actaul response message)
      status code (0..1, String) (carries the status of the response, for ex, 001 (successful), 002 (error))
And now we are planning to make use of Fault Message Type, to track the errors from SOAP (status code 002). But, we are not sure on how to track this for all the requested records. Is it possible to track the errors for all the requested records in a singe call using fault message type? For eg if 8 records are successful and 2 are invalid, then we should get 10 records in response 8 for valid and 2 for invalid accordingly.
Please calrify.
Thanks.
Rohit

For eg if 8 records are successful and 2 are invalid, then we should get 10 records in response 8
for valid and 2 for invalid accordingly.
Check if you can modify the WSDL structure to include an error node that would get populated incase of invalid entries....this would mean that you get the success and failure details in the single message....also at the proxy-end make the necessary change in your DT.....may be then you do not need to use the fault message...
Regards,
Abhishek.

SOAP fault - How to log error in response message map

Hi,
I have a scenario ABAP Proxy <-> XI <-> SOAP.
Occassionally there is an issue with communication to the destination system and an HTTP 500 Error is returned. I assume this is due to a system related error and it is returned as a SOAP Fault as opposed to a SOAP response with payload.
How do I get this "HTTP-500" error into my message map to return to the calling system ?
I have looked at Fault Messages but need to know if these are relevant for the SOAP Adapter and how they can be utilised ?
Thanks for any help.
Kind regards
Colin.

SOAP fault message not in correcto format to allow an application error to be caught.

Passing JDBC adapter error message back to SOAP fault message

I have a JDBC adapter that is returning an error in the response message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SAPINS' (structure 'StatementName1'): java.sql.SQLException: ORA-01843: not a valid month ORA-06512: at "SAP.SAPINS", line 129 ORA-06512: at line 1</SAP:AdditionalText>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I would like to pass the error message back to the fault section of a SOAP adapter.
Is there an easy way to do this using fault messages, or is there some other way to do this?
BR,
Tony.

HI,
DId you install JDBC driver ?
If not check this guide-https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
Thread-
Legacy_XI_MySQL
Regards,
Moorthy

SOAP adapter engine with system error, problem with fault message.

HI,
I have IDOC -> PI -> SOAP scenario.
Idoc to PI is async. I have no problem in receiving the idoc in PI. The message mapping is carried out and sent to the adapter engine. I can also see the technical routing payload. It is sucessful at XML monitoring in SXMB_MONI.
The error is at PI -> SOAP.
I have wsdl provided by the receiver webservice. Which I have imported.
And created a service interface against this wsdl. I tried changing it to both sync and async.
I have also provided fault message.
I have set a receiver soap communication channel and provided the target URL like "http://xxx/services" and soap
action = processDocument. Also provided user id and password.
I have a
Sender Agreement
Receiver determination
Interface determination
Receiver Agreement
I check in RWB adapter engine, this message goes to system error. The error log is as shown at the bottom.
When I see the message content, the SOap document shows me the details about IDOC, Instead I feel it should match
with the wsdl, where they have specified the corresponding interface name and address location etc.Please correct me.
How does the receiver know which service interface is it? The Service Interface which I created in the ER is
different from the WSDL, Does this have to be same? I see that the soap document in the adapter engine has the
Service interface name which I created in the ER. Where in the document the Reciever interface name is sent?
Where can I see the generated soap document for the receiver?
Is there some setting/configuration required in PI for this to work?
I tried using the tcpgw to see the error. If I dont provide the service interface name in the communication channel
then I get the following error in the TCPGW. "The service cannot be found for the endpoint reference"
When I provide the service interface name in the communication channel I get a valid fault message.
Similarly
When I use SOAPUI, I can see the fault exception being return. The adapter engine doesnot show an equivalent message
instead it goes into system error as shown at the bottom. I guess this is expected, if so what is the work around? (I found this weblog /people/alessandro.guarneri/blog/2011/01/10/soap-fault-in-sap-pi-hijack-it, do I need to implement this? Or use ALEAUD?
The fault message what I see in SOAPUI has the below format.
<soapenv:Fault xmlns:axis2ns1="http://schemas.xmlsoap.org/soap/envelope/">
         <faultcode>axis2ns1:Server</faultcode>
         <faultstring>nested exception is: psdi.util.MXApplicationException: BMXAA7136E - Validation failed when the
                            database default values were set. See the associated message for more information.
           BMXAA4190E - Country NZ is not in the value list.</faultstring>
         <detail>
            <Exception>org.apache.axis2.AxisFault: nested exception is: psdi.util.MXApplicationException: BMXAA7136E
                      - Validation failed when the database default values were set. See the associated message for more information.
     BMXAA4190E - Country NZ is not in the value list.
            /Exception>
         </detail>
</soapenv:Fault>
And the fault message in my ER service interface is stanadard datatype ExchangeFaultData, which is different from
the above. Is this the problem? Can I change the data type here to be the same as above?
Audit log in the RWB adapter engine.
Time Stamp Type Description
30.09.2011 15:10:57 Information MP: processing local module Localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
30.09.2011 15:10:57 Information SOAP: request message entering the adapter with user J2EE_GUEST
30.09.2011 15:10:57 Information SOAP: completed the processing
30.09.2011 15:10:57 Information SOAP: sending a delivery error ack ...
30.09.2011 15:10:57 Information SOAP: sent a delivery error ack
30.09.2011 15:10:57 Error MP: exception caught with cause
com.sap.engine.interfaces.messaging.api.exception.MessagingException
30.09.2011 15:10:57 Error Adapter Framework caught exception: null
30.09.2011 15:10:57 Error Delivering the message to the application using connection
SOAP_http://sap.com/xi/XI/System failed, due to:
com.sap.engine.interfaces.messaging.api.exception.MessagingException.
30.09.2011 15:10:57 Information The message status was set to WAIT.
30.09.2011 15:10:57 Information The asynchronous message was successfully scheduled to be delivered at Fri Sep 30
15:15:57 NZDT 2011.

I tried changing it to both sync and async.
I have also provided fault message.
dont feel that you need to do above steps.
I have a
Sender Agreement
ideally you dont need a sender agreement (and a channel) for IDOC --> PI flow.
When I see the message content, the SOap document shows me the details about IDOC
this is fine...you may see fields as seen in EDI_DC40 of the IDOC...
How does the receiver know which service interface is it?
receiver need not know about the SI created in PI.
The Service Interface which I created in the ER is
different from the WSDL, Does this have to be same?
you should the WSDL (external definition) as the Request Message in your service interface.
Is there some setting/configuration required in PI for this to work?
nothing specific...AFAIK
I have set a receiver soap communication channel and provided the target URL like "http://xxx/services" and soap action
can you open the URL from Internet explorer...from your machine or from the machine which is in the same network as your PI server?
Things to check:
WSDL structure in PI and in target system is exactly the same.
does the target system require mesage in SOAP format (SOAP envelope - SOAP Header + SOAP body)?
target system is up and running?

Inactivation error in Declaring Fault Message type.

Hi all,
when iam trying to create a message type with refering to data type "ExchangeFaultdata" , and when iam activating the corresponding message interface it says the the Message type that iam using is reffering to a inactive message type.
i tried even activating it , but still it doesnt work.
what could be the reasons?.
Thanks in Advance.
Kishore Kumar Yerra.

Hi All,
i did a small mistake , it troubled .
Actually my intention was to create a message type referring to a ExchangeFaultdata Type , so i created a normal message type , what actually i was supposed to do is create a Fault Message type.
This was the issue why i was getting errors. now the problem is solved
Regards,
Kishore Kumar Yerra.

Two Fault messages in PI - Error

Similar Messages

Maybe you are looking for