Two sdks on same machine?

hi,
i'm working on a project and have to install sdk1.3 on my pc but at the same time i'm reading a book to learn other things about java and that requires skd1.4. i'm assuming it's impossible due to path errors, but could i install both sdks on my machine and somehow make it know which one to use when?

Heya,
good to hear people running so many sdk's successfully, but how does it affect what RT different browser use?
--Imiro

Similar Messages

Two database in same machine

Hai
I want to create two database in same machine. I searched in google but no use.
Is it possible in oracle 9i r2?
If so,Anybody please help on that.

jey84 wrote:
I want to create two database in same machine. You can have a 100 Oracle databases on the same machine. The issue though is why?
Why do you want to duplicate database overheads? Why two sets of system and process monitoring processes? Log writers? Database writers? Etc.
Why two SGAs? Why two system tablespaces? Two temp tablespaces, undo tablespaces? Two sets of redo logs? Etc.
You now have two database footprints. Instead of a single large SGA with properly sized buffer cache, shared pool, large pool and so on - you know have two smaller SGAs and smaller caches and pools that are now less capable and less scalable.
Why would you want to do this?
There are no sound technical reasons for running multiple database instances on a server - unless it is something like a 32 CPU/multicore server with 256 GBs of memory. But then why not use this as a cloud-type server on which you can run multiple server VMs? One VM for each database, as that provides more flexibility than multiple databases on a single server(physical or VM)?
In today's world of cluster and cloud computing, running 2 databases instances on the same server does not make much sense. And needs to be backed up by reason and logic that justify such an approach.

Two clusters on same machine using well know addresses - is it possible?

Hi,
I try to setup two clusters (each with two nodes) on the same machine and want to use WKA for both of them. For the first one I do not have problems and it starts normaly.
When I try to start a node from the second cluster I get this message :
2011-07-07 12:00:06.984/10.710 Oracle Coherence EE 3.5.2/463p5 <D5> (thread=Cluster, member=n/a): Service Cluster joined the cluster with senior servi
ce member n/a
2011-07-07 12:00:14.899/18.625 Oracle Coherence EE 3.5.2/463p5 <Error> (thread=Cluster, member=n/a): This member could not join the cluster because of
a configuration mismatch between this member and the configuration being used by the rest of the cluster. This member specified a cluster name of "Ac
meCluster2" which did not match the name of the running cluster. This indicates that there are multiple clusters on this network attempting to use ove
rlapping network configurations. Rejected by Member(Id=1, Timestamp=2011-07-07 10:08:34.426, Address=<IPaddress>:8088, MachineId=3377, Location=site:c
orproot.net,machine:<MachineName>,process:564, Role=TibcoCepContainerBEMain).
2011-07-07 12:00:14.899/18.625 Oracle Coherence EE 3.5.2/463p5 <D5> (thread=Cluster, member=n/a): Service Cluster left the cluster
2011-07-07 12:00:14.899/18.625 Oracle Coherence EE 3.5.2/463p5 <Error> (thread=main, member=n/a): Error while starting cluster: java.lang.RuntimeExcep
tion: Failed to start Service "Cluster" (ServiceState=SERVICE_STOPPED, STATE_JOINING)
I have configured the "java.property.tangosol.coherence.wka.port" and "java.property.tangosol.coherence.wka1.port" to different values for the second cluster than the values of the first.
Fist of all is such setup possible?
Any idea why I get this error and what else I need to change in the configuration for the second cluster?
greetings Georgi

Hi,
Now it works for me. I think I was setting the WKA on too many places as the documention of the application I have is a little bit confusing.
First I have posted the WKA with java.property as it was specified in the documentation of my application to set them in the script that starts it. I have removed them from the script and used only the xml file to configure coherence.
I am not using the override file but rather change the WKA configuration in the jar file itself. For the real enviornment and not my laptop I will use it.
Also there were two coherence.jar files in my class path and the first one was common for the both clusters and the second one was different for each cluster. In this second one I was changeing tangosol-coherence.xml the logs were showing that the configuration loaded from and also in the classpath this second was before the other one . Maybe I was wrong so I have removed the first coherence.jar that was common.
Maybe the combination of those two things were the problem but now it works. Thanks for your comments.
greetings Georgi

How to map sid's of two session on same machine ??

1. If sql sessions are opened on same machine and same process is running on
both the sessions, is there a way to map out sid's and serial#'s from v$session for both the sessions?.
2. If a stored procedure is running, is there any why to tell that this particular session is currently running a stored procedure.
Thanks for your help,

Hello gautam,
question one..doesn't make sense...however if you want to know the sid' serial#'s for the particular session..that can be accomplished..
and for question 2 ..yes it is possible..
it will tell you what it is running...which is "QUERY" (stored_procedure, select, update..etc)
good luck
Shah

Can not run two domains on same machine (JVM).

Hi every body in news group,
I have a problem with weblogic 6.x, I am trying to run multiple domains e.g examples,
mydomain, mydomain1 on the same machine (JVM) at the same time, but I can not
run all three at same time, I changed ports already on all domains, and every
one has different ports, e.g 7001, 7002, 7003, but still when one domain is running,
and I try to run other startup file by command prompt, it says, can not initialize
JVM, can some one help me to understand, why I can not run different domains at
one time, according to my knowledge, we can run multiple domains on one JVM, by
giving them differnt ports. I will appreciate your help, looking forward to your
response, thanks in advance.
Cheers!
Ghayyur

This should work. Could you post the exact error message?
Ghayyur Hassan wrote:
Hi every body in news group,
I have a problem with weblogic 6.x, I am trying to run multiple domains e.g examples,
mydomain, mydomain1 on the same machine (JVM) at the same time, but I can not
run all three at same time, I changed ports already on all domains, and every
one has different ports, e.g 7001, 7002, 7003, but still when one domain is running,
and I try to run other startup file by command prompt, it says, can not initialize
JVM, can some one help me to understand, why I can not run different domains at
one time, according to my knowledge, we can run multiple domains on one JVM, by
giving them differnt ports. I will appreciate your help, looking forward to your
response, thanks in advance.
Cheers!
Ghayyur

Two users on same machine working on same iWeb site

Hi
We have two users on our new iMac because some things we want to keep separate. But we both want to work on our iWeb site when we feel like it, from our own account.
I copied the domains file into Users\Shared and it appeared we could both work on it from there. But then I found that each blog entry becomes only partially editable by the other user. iWeb doesn't complain when I save, but it isn't actually saving the changes to blog entries that were started by the other user.
Can anyone please help tell me how two users are supposed to work on the same iWeb blog? Thank you!

I would also like to know the answer to this.
Thanks!

Install two databases on same machine

Hi all,
I have a machine with win 2000 srv with an oracle 8.0.6 installed; Now I want to install a new db, new istance, with oracle 8.1.7.4, but i want to maintaining the db 8.0.6. How i must proceed?
thanks
pedro

Hi again,
You can use two listeners.... but then you need to use 2 TCP ports. Not really usefull.
You only need one listener for both ORACLE_HOMEs. It's advisable to use the one from the latest release (i.e. 8i).
Using only one listener is afaik the good way to set things up.
Regards,
Yoann.

Two different projects in the same machine sharing some objects

Hello dear all
I got this scenario:
Same machine;
2 clients (70 and 80);
2 Projects
- AR Payment Process (prototype) for an existing company
- New company configuration
Coding Block (e.g.: for experiences in AR - prototype )
In the end - same Production machine
Projects running simultaneously
AR payment project (prototype) > New company configuration (in terms of duration)
Description
I got 2 projects running at the same time. At least somewhere in the time they will run simultaneously. One will consist in a new AR-Payment process for an existing company, and another one consisting in a creation of a new company.
So, Iu2019m afraid that those projects cannot run simultaneously once for payment process we will use coding block for sure.
We will have to change some standard tables (e.g. SPL Table) with different fields (two, to be more precise) u2026.. We do not have time to make one, and after another one, and then put them together and adjust it.
So, at this point Iu2019m not pretty sure about the direct influences, and in case of influence occur, what can be the solutions to avoid them.
Is there any way of controlling all the possible changes that will be made in the shared objects?
We really need to run these projects.
Thank you all in advance

The fastest way I can advice is...
1. edit your credits sequence (the clips you want to keep going as your credits roll)
2. nest the clips in a new sequence then you have a timeline with a nested sequence in your track 1...
3. Select your nested sequence in the track 1 and use the motion tab to scale/rotate/crop/move your image wherever you want in the canvas...
3. create a second track for your rolling credits...
4. create your rolling credits
5. if you have different clips for your rolling credits you may want to nest these too...
6. select your rolling credits and use the motion tab again to scale/crop/rotate/move your credits wherever you want in the canvas
Hope this help...

Can I install two independent instances of Thunderbird on the same machine?

It is required to install two instances of Thunderbird on the same machine, each with its own account(s), Profiles folder(s) and sign-on password, so that each of two users can securely use Thunderbird at different times..
How can this be achieved?
Thanks,
NMB1

The simplest method is to install Thunderdird normally from an admin account. The two or more users then use ordinary none admin accounts. Thunderbird will be available to each user and each OS account has a separate Thunderbird profile, so each user has effectively totally separate Thunderird accounts and passwords.
* See http://windows.microsoft.com/en-gb/windows/create-user-account#create-user-account=windows-7

Can i share music and photos between two users on the same machine?

How can I share my music and photos between two users on the same machine?

Thank you Joe - I tried this but it's only showing a teensy amount of music - the stuff on the second users account as opposed to the giagntic library on the 'main' account. I actually went to a Genius Bar and they said that apple doesn't really want you to share music between accounts - parents don't want to hear their kids music etc. Which seemed strange, but it might be the case sadly Thanks anyway!

Communication between Two WebLogic instances on the same machine

Hi,
We're having a problem with communication between two copies of Weblogic on
the same machine. They are configured with seperate ports (regular and SSL).
Independantly, they run fine. I can access EJBs running on either of them.
The problem is that a bean in one of them has code which attempts to access
an EJB on the other one. The procude fails when trying to obtain the initial
context. This same code works if compilied independantly of WebLogic on the
same machine.
Are there any known issues regards communication between two running
instances of Weblogic on the same machine?
Thanks in advance,
Randy Yarger
marchFIRST
[email protected]

Thanks for the prompt reply.
There is one IP address (internal address 10.227.1.34) one the machine. WLS1
is set up at ports 7001 and 5133. WLS2 is setup at ports 7004 and 7005.
When WLS1 attempts to obtain a context to WLS2 with the URL
t3://10.227.1.34:7004/ it pauses for a long period of time. Running truss
on the both WLS processes shows communication occuring between the two
followed by long periods of silence. Finally WLS2 spits out the error
ConnectionException[7001,7001,5133,5133,7001,7001] (paraphrased, I can get
the entire error if it would help).
After another long pause, WLS1 quits trying with the error 'Server
10.227.1.34:7004 not found' (again paraphrased).
Among the things we've tried:
* Changing the URL from the IP to 127.0.0.1
* Enabling/disabling SSL on either or both WLSs.
* Changing the server name in WLS2's copy of weblogic.properties from
'myserver' to 'myserver2' (previously they were both 'myserver')
* Upgrading WLS2 to 5.1.0sp5 (Tried upgrading WLS1, but was getting class
not found errors and quit because that WLS is being used by other people)
This is a Solaris server. WLS1 is running 5.1.0 and WLS2 is running 5.1.0sp5
Any suggestions would be appreciated.
Best,
Randy Yarger
marchFIRST
[email protected]
"Michael Girdley" <[email protected]> wrote in message
news:[email protected]...
>
>
There should not be. What is your network configuration? Are they on
separate IP addresses?
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"Randy Jay Yarger" <[email protected]> wrote in message
news:[email protected]...
Hi,
We're having a problem with communication between two copies of Weblogicon
the same machine. They are configured with seperate ports (regular andSSL).
Independantly, they run fine. I can access EJBs running on either of
them.
The problem is that a bean in one of them has code which attempts toaccess
an EJB on the other one. The procude fails when trying to obtain theinitial
context. This same code works if compilied independantly of WebLogic onthe
same machine.
Are there any known issues regards communication between two running
instances of Weblogic on the same machine?
Thanks in advance,
Randy Yarger
marchFIRST
[email protected]

 Ps installation on two different boot volumes of same machine?  Ps 11.0.2 Mac PPC  and then...

Hello, I'm new to this forum.
My goal here is to have two different Photoshop 11.0.2 installations on two different boot volumes of one and the same Power Mac (PPC) G5 Quad, one being a Tiger 10.4.11 system and the other one a Leopard 10.5.8 system, for the purpose of installing two different modalities of the same Epson Photo Stylus 2200 printer, one with the printer set to use the photo black ink cartridge for luster and glossy papers, and the other one using the matte blank ink.
This is because I prefer to simply change the startup disk when switching inks rather than having to delete and re-add the necessary printers. (This particular printer does not support ink cartridge switching under any version of Mac OS X.)
Photoshop is currently only used on this one machine. Obviously this intended scheme fits well within the EULA conditions.
My three questions are:
(a) whether there is any technical issue I have failed to consider,
(b) whether each copy of Photoshop on the same machine will have to be activated separately (in other words, is the activation tied to the CPU or to the boot volume drive?), and
(c) if the answer to the latter question is yes, whether this will count as one or two activations for purposes of later installing a single instance of the Photoshop 13.x ("CS6") upgrade on an Intel- MacBook, since obviously C6 will not run on my PPC Mac. Again in sum, will I be able to continue to run Photoshop 11.0.2 on two different volumes of the same PPC machine and the Photoshop 13.x upgrade on the laptop?
As further explanation, I would use Photoshop 13.x on the Mac-Intel laptop only in order to run ACR 7.x, but would keep my PPC G5 Quad as my photo editing and printing machine running Photoshop 11.0.2, since an upgrade of my desktop machine to a comparably powerful Mac Pro is simply not an option for both financial and technical reasons (the Classic environment is essential).
Any and all input and guidance will be appreciated.
Message was edited by: station_one

Thank you for the lightning-fast response—and on a Sunday morning too!
MichaelKazlow wrote:
…Is it technically a violation, that is something I'd leave Adobe to answer.
From my previous visits to other forums as a lurker, I was under the firm impression you were in fact an Adobe employee, Mr. Kazlow. I hope that is still the case and you are only referencing your participation in these user-to-user forums as a volunteer, not as an official representative of the corporation.
Much obliged.

Can not get two instances to join same cluster even on same machine

On a RedHat Linux box, I have failed to get two instances of coherence to join the same cluster. I have managed to get the muticast test tool to show that packets are being sent and received. To do this, I had to:
java -cp bin/tangasol.jar -Djava.net.preferIPv4Stack=true com.tangosol.net.MulticastTest
Wed Apr 15 21:02:45 WET 2009: Sent packet 1.
Wed Apr 15 21:02:45 WET 2009: Received test packet 1 from self (sent 7ms ago).
Wed Apr 15 21:02:47 WET 2009: Sent packet 2.
Wed Apr 15 21:02:47 WET 2009: Received test packet 2 from self
Wed Apr 15 21:02:49 WET 2009: Sent packet 3.
Wed Apr 15 21:02:49 WET 2009: Received test packet 3 from self (sent 1ms ago).
Wed Apr 15 21:02:51 WET 2009: Sent packet 4.
Wed Apr 15 21:02:51 WET 2009: Received test packet 4 from self
However, I could not get the following to show that two instances are joining the same cluster... When I start to instances, both of them create a new cluster with only one member in each.
java -Djava.net.preferIPv4Stack=true -jar lib/coherence.jar
and obviously, when I try to start two instances of the sample application, I get the same problem.
java -cp ./lib/coherence.jar:./lib/tangosol.jar:./examples/java -Djava.net.preferIPv4Stack=true -Dtangosol.coherence.localhost=172.16.27.10 -Dtangosol.coherence.localport=8188 -Dtangosol.coherence.cacheconfig=/cache/explore-config.xml com.tangosol.examples.explore.SimpleCacheExplorer

Thanks for that... I ran:
jdk1.6.0_13/bin/java -Dtangosol.coherence.log.level=6 -Dtangosol.coherence.log=/my1.log -Dtangosol.ccacheconfig=/cache/explore-config.xml -Djava.net.preferIPv4Stack=true -jar lib/coherence.jar
and then
jdk1.6.0_13/bin/java -Dtangosol.coherence.log.level=6 -Dtangosol.coherence.log=/my2.log -Dtangosol.ccacheconfig=/cache/explore-config.xml -Djava.net.preferIPv4Stack=true -jar lib/coherence.jar
from the same machine and get the following from the log file of the second run (my2.log)
Oracle Coherence Version 3.4.2/411
Grid Edition: Development mode
Copyright (c) 2000-2009 Oracle. All rights reserved.
2009-04-16 06:53:11.574/0.625 Oracle Coherence GE 3.4.2/411 <Warning> (thread=main, member=n/a): UnicastUdpSocket failed to set receive buffer size to 1428 packets (2096304 bytes); actual size is 89 packets (131071 bytes). Consult your OS documentation regarding increasing the maximum socket buffer size. Proceeding with the actual value may cause sub-optimal performance.
2009-04-16 06:53:11.660/0.711 Oracle Coherence GE 3.4.2/411 <D5> (thread=Cluster, member=n/a): Service Cluster joined the cluster with senior service member n/a
2009-04-16 06:53:14.892/3.943 Oracle Coherence GE 3.4.2/411 <Info> (thread=Cluster, member=n/a): Created a new cluster "cluster:0x2FFB" with Member(Id=1, Timestamp=2009-04-16 06:53:11.58, Address=192.168.1.7:8089, MachineId=26887, Location=process:3514, Role=CoherenceConsole, Edition=Grid Edition, Mode=Development, CpuCount=8, SocketCount=2) UID=0xC0A8010700000120ADB3521C69071F99
SafeCluster: Name=cluster:0x2FFB
Group{Address=224.3.4.2, Port=34411, TTL=4}
MasterMemberSet
ThisMember=Member(Id=1, Timestamp=2009-04-16 06:53:11.58, Address=192.168.1.7:8089, MachineId=26887, Location=process:3514, Role=CoherenceConsole)
OldestMember=Member(Id=1, Timestamp=2009-04-16 06:53:11.58, Address=192.168.1.7:8089, MachineId=26887, Location=process:3514, Role=CoherenceConsole)
ActualMemberSet=MemberSet(Size=1, BitSetCount=2
Member(Id=1, Timestamp=2009-04-16 06:53:11.58, Address=192.168.1.7:8089, MachineId=26887, Location=process:3514, Role=CoherenceConsole)
RecycleMillis=120000
RecycleSet=MemberSet(Size=0, BitSetCount=0
Services
TcpRing{TcpSocketAccepter{State=STATE_OPEN, ServerSocket=192.168.1.7:8089}, Connections=[]}
ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_JOINED), Id=0, Version=3.4, OldestMemberId=1}
the contents of the xml file are:
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
<caching-scheme-mapping>

<cache-mapping>
<cache-name>*</cache-name>
<scheme-name>default-replicated</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>

<replicated-scheme>
<scheme-name>default-replicated</scheme-name>
<service-name>ReplicatedCache</service-name>
<backing-map-scheme>
<class-scheme>
<scheme-ref>default-backing-map</scheme-ref>
</class-scheme>
</backing-map-scheme>
</replicated-scheme>

<class-scheme>
<scheme-name>default-backing-map</scheme-name>
<class-name>com.tangosol.util.SafeHashMap</class-name>
</class-scheme>
</caching-schemes>
</cache-config>

How to run two instances of weblogic server as an NT service on the same machine

I have to have two instances, one I want to use it for development(testing
purposes) and the other one I need to use it as a live one(Production)
So that I can test my applications independently without disturbing the live
application.
Thanks
Madhu

I can start one instance as an NT service, but the other instance, I have to
start with the command. I need to run as an NT service because I need to
use NTRealm
Security
I have created a new domain , server listening to different port.
Thanks
madhu
Bruce Blackshaw <[email protected]> wrote in message
news:[email protected]..
"m holur" <[email protected]> wrote in message
news:<3c0d2b66$[email protected]>...
I have to have two instances, one I want to use it fordevelopment(testing
purposes) and the other one I need to use it as a live one(Production)
So that I can test my applications independently without disturbing thelive
application.I would not recommend having development and production on the same
machine.
But if you wish to do so, you can create multiple domains under the
same installation, say one for dev and one for prod. On the same
machine make sure they listen on different ports. This, of course,
ties you to the same version for development and production - making
it impossible to upgrade just one.
You may be able to do two completely different installations (i.e.
different BEA HOMEs) on the same machine - I haven't tried this but it
looks possible. This would mean you could upgrade each separately. The
presence of BEAHOMELIST in the registry on NT seems to indicate this
should work.
Bruce Blackshaw
Free Java FTP Library
http://www.enterprisedt.com/downloads/ftp.html

Two running instances of Weblogic on the same machine

I need to run at least two instances of Weblogic on the same machine. My Company GE Capital purchases the Clustered version and the BEA Engineer who did the install did not know Unix and could not intall the instances. Could you please give pointers to on how to do this? You can also write me to [email protected]
Thanks,
John G

....plus, you have to consider the license issue.
Vidar wrote:
>
It does not sound to bad, but would it not be hard to cooperate with other
people, since you will often use API's and EJB's developed and deployed by
other team-members?
Does anybody have any documents or ideas on what the best way to cooperate
in a development-team is?
"Michael Girdley" <[email protected]> skrev i melding
news:39e15942$[email protected]..
Yes, that is the best way to do it.
In practice, we have found that each developer having their ownworkstation
with an instance of WLS works best.
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"newbie" <[email protected]> wrote in message
news:[email protected]..
I am also pondering on the same problem right now...
I am trying to get an environment setup so that multiple
developers can have their own weblogic "instances" to play
with - so that each of them can start/stop the server,
deploy EJBS etc without affecting one another in a UNIX
environment. to accomplish this - do I just install the
server multiple times with different port numbers on the
same machine or is there a a better way to do this?
Appreciate any input.
Thanks
"john Gongora" <[email protected]> wrote:
I need to run at least two instances of Weblogic on the same machine.
My
Company GE Capital purchases the Clustered version and the BEA Engineerwho
did the install did not know Unix and could not intall the instances.Could
you please give pointers to on how to do this? You can also write me to
[email protected]
Thanks,
John G

Two sdks on same machine?

Similar Messages

Maybe you are looking for