Two types of wifi authentication on 871w

Hi.
I have a small wireless network, which consists of three AP1121G with c1100-k9w7-mx.123-8.JEB1 ios and one 871w with c870-advipservicesk9-mz.124-24.T1. I've configured two different ssid's with individual authorisation types - ssid_1 with eap, ssid_2 with wpa. All three ap's works as it should be, but 871w authorises only eap connections, and all other types are rejected
What can cause this problem and is there any way to fix it?
Thanks.

When i'm connecting to SSID_1 network with eap my login/password is successfully accepted, but when i'm trying to connect to SSID_2 my wpa key is rejected like i'm entering it wrong. And all i have in logs is "%DOT11-7-AUTH_FAILED: Station Authentication failed".
Is there any debug command, that can show me what am i sending and why it is rejected?

Similar Messages

Use smart card for 802.1x secured WiFi authentication

Hi,
is it possible to use a certificate stored on a USB Security Token for WiFi 802.1x authentication?
I have setup a test environment with all required components (AD, Enterprise CA, NPS, WPA2-Enterprise capable WiFi Access Point, all required certificates, all Server 2012 R2 / Windows 8.1 Pro) and created a user certificate for WPA2-Enterprise secured
WiFi access (802.1x). Everthing works fine as long as the user certificate is stored in the local certificate store of the user's client computer: The user can connect to the WiFi network and the NPS logs show that the user has been authenticated correctly
and granted access.
To test this scenario with a Smart Card (Safenet USB Token), I stored that same user certificate on the token (incl. private key). The Safenet software on the client computer automatically makes the certificate stored on the token available in the local
certificate store as soon as the token has been plugged in (checked via MMC Certificates snap-in). But the certificate can't obviously be used for the desired WiFi authentication: If I try to connect the secured WiFi (the same as in scenario 1) the connection
fails.
As I'm using exactly the same certificate in both scenarios, I don't think there's anything wrong with the settings in the certificate, the NPS or any other infrastructure component. The reason for failure in scenario 2 must be lying somewhere in either
the local client computer configuration or in the Safenet software on the client computer.
I'm very familiar with all the PKI and authentication stuff, but I'm new to smart cards. Are there differences between different types of smart cards and for what purpose one can use them? (USB tokens, chip cards, virtual tokens, etc.?)
Has anybody experience in creating a 802.1x secured WiFi access with smart card based user certificates who could advise?
Thanks + Best Regards
Matt

Hi,
I found some links form technet site which can be helpful in this case
Network access authentication and certificates
http://technet.microsoft.com/en-us/library/cc759575(v=ws.10).aspx
Enable smart card or other certificate authentication
http://technet.microsoft.com/en-us/library/cc737336(v=ws.10).aspx
Quote:
Client certificate requirements
With EAP-TLS or PEAP-EAP-TLS, the server accepts the client authentication attempt when the certificate meets the following requirements:
The client certificate is issued by an enterprise CA or mapped to a user or computer account in Active Directory.
The user or computer certificate on the client chains to a trusted root CA, includes the Client Authentication purpose in EKU extensions (the object identifier for Client Authentication is 1.3.6.1.5.5.7.3.2), and fails neither the checks that are performed
by CryptoAPI and specified in the remote access policy nor the Certificate object identifier checks that are specified in IAS remote access policy.
The 802.1X client does not use registry-based certificates that are either smart card-logon or password-protected certificates.
For user certificates, the Subject Alternative Name (SubjectAltName) extension in the certificate contains the user principal name (UPN).
For computer certificates, the Subject Alternative Name (SubjectAltName) extension in the certificate must contain the client's fully qualified domain name (FQDN), which is also called the DNS name
Yolanda Zhu
TechNet Community Support

How to use two types of fonts in a richtextdocument

hello,
i want to print a barcode and some text into a richtextdocument
example:
this.richTextBox1.AppendText("\n");
Font f1 = new Font("3 of 9 Barcode", 50);
this.richTextBox1.Font = f1;
this.richTextBox1.AppendText("*1234554*");
Font f2 = new Font("Arial", 20);
this.richTextBox1.Font = f2;
this.richTextBox1.AppendText("fooo");
but it always uses the second one?
how can i resolve this?
i want to use two types of fonts in the same rich text document.
thank you very much!!

Select some text and then set the SelectionFont property for each selection, e.g.:
this.richTextBox1.AppendText("\n");
this.richTextBox1.AppendText("*1234554*");
richTextBox1.SelectionStart = 1;
richTextBox1.SelectionLength = 9; //End of first word
richTextBox1.SelectionFont = new System.Drawing.Font("Tahoma", 10);
this.richTextBox1.AppendText("fooo");
richTextBox1.SelectionStart = 10;
richTextBox1.SelectionLength = 4;
richTextBox1.SelectionFont = new System.Drawing.Font("Arial", 20);
Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question.

Are there two type of associations between objects or are there just different representations?

I've been spending some time on 're-tuning' some of my OOP understanding, and I've come up against a concept that is confusing me.
Lets say I have two objects. A user object
and an account object.
Back to basics here, but each object has state, behaviour and identity (often referred to as an entity object).
The user object
manages behaviour purely associated with a user, for example we could have a login(credentials) method
that returns if successfully logged in or throws exception if not.
The account object
manages behaviour purely associated with a users account. For example we could have a method checkActive() that checks if the account is active. The account object checks if the account has an up-to-date subscription, checks if there are any admin flags added
which would make it inactive. It returns if checks pass, or throws exception if not.
Now here lies my problem. There is clearly a relationship between user and account,
but I feel that there are actually two TYPES of association to consider. One that is data driven (exists only in the data/state of the objects and the database) and one that is behaviour driven (represents an object call to methods of the associated object).
Data Driven Association
In the example I have presented, there is clearly a data association between user and account.
In a database schema we could have the following table:
USER_ACCOUNTS
id
user_id
When we instantiate the account and
load the database data into it, there will be a class variable containing user_id.
In essence, the account object
holds an integer representation of user through user_id
Behaviour Driven Association
Behaviour driven associations are really the dependencies of an object. If object A calls methods on object B there is an association going from A to B. A holds an object representation of B.
In my example case, neither the user object
nor the account object
depend on each other to perform their tasks i.e. neither object calls methods on the other object. There is therefore no behaviour driven association between the two and neither object holds an object reference to the other.
Question
Is the case I presented purely a case of entity representation? The association between user and account is
always present, but its being represented in different ways?
ie. the user entity
has an identity that can be represented in different forms. It can be represented as an object (the instantiated user object)
or as a unique integer from the users table in the databases.
Is this a formalised way of recognising different implementations of associations or have I completely lost my mind?
One thing that bugs me is how would I describe the differences in UML or similar? Or is it just an implementation detail?

It s a bit hard to fully understand what is problem actually in :). I think you are a bit mixing some concepts.
Entities representation
At first, all models we are implementing is just a simplification of some real-world objects and environment. Your conceptual entity user corresponds to some real user and contains some attributes we are intresteing in according to application needs. Thus there
are some models we have to implement.
Thus, all user defined by DB schema, user defined by class, and probably user defined by some presentation logic is normally present some real-world user. It is only about implementation purposes, we have to store, view and manipulate with user.
On the other hand let's take a look on Single Responsibility Principle. It tells us to use every class or program unit just for certain needs. Using single user (class or program unit) for storage and presentation needs violates this principles.
the user entity has an identity that can be represented in different forms. It can be represented as an object (the instantiated user object) or as a unique integer from the users table in the
databases.
So, the answer is yes.
Associations and dependencies
I think it is more about terminology than about nature of problem. But in general you are right - there are different types of object realtions (especially, I will use other terms to list it). For example "referencing", "creation", "using",
"coordinating", "storing", "inheriting" (!) ....
According to this, user instance references account instance. And A instance uses B instance.
For most cases it is good enough to distinguish just "referencing" and "using". It is what you've just written. It's enough common and abstract to be understood by other person when talking about domain, e.g.
But sometimes, to emphasize some aspects you should describe relations in a way like "A dispatches ensemble of Bs" or "R stores X to database". It's more applicable for specification and modelling.
Is this a formalised way of recognising different implementations of associations or have I completely lost my mind?
To call something formalized I suggest to look at UML.
UML and other modelling instruments
One thing that bugs me is how would I describe the differences in UML or similar? Or is it just an implementation detail?
There are a lot of UML models (diagrams). Let's take a look at most well-known - Classes and Objects Diagram.
It's interesting that UML allows to present all type of object relations, and moreover allows to decide "is it just an implementation detail".
Martin Fowler describes 3 levels (or point of views) of understanding of Classes Diagram.
Conceptual. Diagram is considered as high-level domain model, independent from implementation.
Specification. Diagram is considered as high-level realization model containing of interfaces.
Implementation. Diagram is considered as low-level technical paper containing interfaces, classes, references, other types of relations.
Is this a formalised way of recognising different implementations of associations or have I completely lost my mind?
Yes, you have to fix some point of view and choose appropriate relations set.
For example, let's take a look at Classes Diagram and consider it from an implementation point of view. UML defines 3 type of relations (and propose corresponding means to its designation):
Association
Association corresponds "referencing" between instances.
Dependency
Dependency combines all types of relations such as "using", "creating", "storing", etc.
Inheritance.
Inheritances as a fundamental OOP instrument is presented by UML in a distinct way. It's more about classes than about instances, but also one can say that A instance inherit attributes of B instance. So, that's ok.
First and second points of view on Class Diagram, as I remember uses only one type of relation unifying both associations and dependencies and is designated like association (no inheritance, of course).
Also, UML proposes Objects Diagram which is same to Classes Diagram, but fits better for runtime modelling needs.
Finally, a choice of a set of relations taken into consideration depends on a context and point of view. UML provides some ones.

Can we capture two types of Serial Numbers for a material?

Hi,
I have scenario where i need to capture two different types of serial numbers for a material. This scenario is very similar to the below one -
Say if a CAR is a serialized material, then i want to capture engine no. and chasis no. for each car.
I know in standard serial number management, we can capture one kind of serial no. for an item, but can we capture two types of serial number for an item? If yes, how we can do that?
Please help.
Thanks,
Parimal.

Hi,
No it is not possible to have two serial numbers for a material.
The main attribute of a serial number is that it is UNIQUE.
You can better have the vehicle number as the required serial number and the other numbers under the Manufacturer data of the General data tab of the IQ01 transaction. ( Equipment master creation ).
You can better change the name of the manufacturer data such as Model number to Engine numeber and Manu serial no to Chasis no etc.., using CMOD transactions.
Regards

Propagation between two type raw queues

Good day.
I want to enable propagation between two type raw queues -
according to documentation:
http://www.stanford.edu/dept/itss/docs/oracle/10gR2/server.102/b14257/aq_intro.htm#CHDCEFBD -
"+Propagation of Messages with LOBs+
+Large Objects can be propagated using Oracle Streams AQ using two methods:+
+* Propagation from RAW queues+
+* Propagation from object queues with LOB attributes+"
My example:
begin
DBMS_AQADM.create_queue_table(queue_table => 'SRC1_QT',queue_payload_type => 'RAW',multiple_consumers => true);
end;
begin
DBMS_AQADM.create_queue(queue_name => 'SRC1_Q',queue_table => 'SRC1_QT');
end;
begin
DBMS_AQADM.create_queue(queue_name => 'DST1_Q',queue_table => 'SRC1_QT');
end;
begin
DBMS_AQADM.start_queue(queue_name => 'SRC1_Q');
end;
begin
DBMS_AQADM.start_queue(queue_name => 'DST1_Q');
end;
declare
c number;
begin
dbms_aqadm.verify_queue_types(src_queue_name => 'SRC1_Q',dest_queue_name => 'DST1_Q',rc => c);
dbms_output.put_line(c);
end;
Last PL/SQL block returns
VQT: new style queue
+0+
Does it means that queues incompatible?

Yes, it works - and I think dbms_aqadm.verify_queue_types shows wrong answer:
DECLARE
subscriber sys.aq$_agent;
BEGIN
subscriber := sys.aq$_agent('SRC1_SUBS', 'DST1_Q', NULL);
DBMS_AQADM.ADD_SUBSCRIBER(queue_name => 'SRC1_Q',
subscriber => subscriber);
END;
begin
dbms_aqadm.schedule_propagation(queue_name => 'SRC1_Q');
end;
DECLARE
enqueue_options     dbms_aq.enqueue_options_t;
message_properties dbms_aq.message_properties_t;
message_handle      RAW(16);
message             RAW(10000);
BEGIN
for i in 1..100 loop
message := utl_raw.cast_to_raw(to_char(i));
dbms_aq.enqueue(queue_name => 'SRC1_Q',
enqueue_options      => enqueue_options,
message_properties   => message_properties,
payload              => message,
msgid                => message_handle);
end loop;
COMMIT;
END;
select QUEUE,MSG_STATE,COUNT(*) from AQ$SRC1_QT T group by QUEUE,MSG_STATE
QUEUE      MSG_STATE      COUNT(*)
DST1_Q     READY           100
SRC1_Q     PROCESSED       100
Edited by: i.k. on 10.05.2011 10:49
Edited by: i.k. on 10.05.2011 10:50

Why do I get downloads installed with two types, Ex. photoshop CC as well as photoshop CC (2014)

why do I get downloads installed with two types, Ex. photoshop CC as well as photoshop CC (2014)

http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
This messages says (at least some) CC 2014 programs use NEW plugins https://forums.adobe.com/thread/1499663
-so do not uninstall the older CC programs if you use plugins in your programs until you are sure you have plugins that work in CC2014
If you are sure you don't need the old CC programs
-http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
-read reply #3 about the ORDER of uninstalling & installing https://forums.adobe.com/thread/1242671

Ios6 update prevents wifi authentication EULA

I used to be able to connect to a public wifi at Long Island College Hospital in Brooklyn, New York by clicking "Agree" on its End User License Agreement. Ever since updating to ios6 on my iphone 4S the authentication screen does not progress after clicking "Agree", preventing me from getting free wifi. If i click "Disagree" the webpage goes blank. Other iPhone users with ios5 are able to connect fine, as are android phones. Interestingly, I have no such problems with authentication/EULA pages at Starbucks or McDonalds and my wifi router at home still works fine, granting my iPhone access to the Internet.
I tried messing with various combinations under settings/wifi, resetting my iPhone network settings, clearing Safari cache settings, etc.. Nothing allowed me to successfully click "Agree" on that specific free wifi authentication screen, while the previous iOS users continue to be able to connect fine. Just stuck at that screen thanks to the iOS 6.

I used to be able to connect to a public wifi at Long Island College Hospital in Brooklyn, New York by clicking "Agree" on its End User License Agreement. Ever since updating to ios6 on my iphone 4S the authentication screen does not progress after clicking "Agree", preventing me from getting free wifi. If i click "Disagree" the webpage goes blank. Other iPhone users with ios5 are able to connect fine, as are android phones. Interestingly, I have no such problems with authentication/EULA pages at Starbucks or McDonalds and my wifi router at home still works fine, granting my iPhone access to the Internet.
I tried messing with various combinations under settings/wifi, resetting my iPhone network settings, clearing Safari cache settings, etc.. Nothing allowed me to successfully click "Agree" on that specific free wifi authentication screen, while the previous iOS users continue to be able to connect fine. Just stuck at that screen thanks to the iOS 6.

Two types of taxs of one item

Hi Experts:
   I face one problem of posting tax.
   In some cases of our business,there r two types of taxes in one item. First one is paid by customer and another is paid by our company.
   We want to generate the accounting document like that:
   DR: customer AR
   CR: SALES REVENUE
       OUT PUT TAX PAID BY CUSTOMER
   DR: EXPENSE Account
   CR: Tax paid by us
   Can I do it like this? If possible, how can I configure it?
Thanks and Best Regards
David Wang

Hello,
Discuss with your finance team
Thanks
RK

Reg. comparison of two types of Internal tables.

Hi friends!
I have a doubt while declaring a internal table. whether to declare with header line or without header line. Can all types of manipulations be done after retrieving data from DB table to the Inernal table with headerline. Which of these two is more efficient. I would like to know the clear comparison between these two types.
regards,
prasad

Hi,
Incase of declaring an Internal table with header line will make the processing looks simple as with in a loop and endloop statement your internal manipulations namely AT NEW, AT LAST, COLLECT and other similar statements will work out, but still clearing of the respective header needs to be done whenever there is exit happens to the application after successful completion. As because I have encountered errors due to failure in clearing header as in case of batch applications and BDC applications. Also as mentioned memory management also needs to be considered.
Incase of declaring with work area except for the internal manipulations being pointed above, for all other cases it works out effectively and also more safer way to code your application.
Also the declaration with or without header line also accounts whenever there is a call to a function module at which if we require to receive or pass some data through TABLES option then we need to look for the specified table type being used.
So in all it depends the process in your application where in the type of declaration accounts.
Regards,
Jagath.

Multidimensional arrays - two types

Hi,
Im just thinking about a app I have to write, I need to get two lists of integer values with a name string that you can get the value through.
I was thinking of using a two dimensional array of the first "column" being of integers and the second being a string. But I am sure that you cant actually have and array where two types are used. How do you get round this.
I have looked at a hashTable but you cant sort it by the value of the integer (I need two of these to compare them by the order they are sorted).
Any thoughts would be greatly appreciated ?
p.s. Im not looking for any code or anything just what data structure to use and possible how to initialise it if it is possible

How about creating a class that has the integer and the string as attributes and then either make them public so you can access them directly (a la a "C" struct) or create simple get/set methods for manipulating them? Then you could create an array (or vector, or what have you) of these objects.
Hope that helps.
-N9ski

Connect two machines via WiFi

I've forgotten the magic routine to connect two machines via WiFi.
Have Sharing turned on, multiple tries with Go > Network. Nothing.
Cannot see Machine A from Machine B. Clearly I've forgotten how to walk & chew gum at the same time.

Is there a Router involved?
If not then under the Airport icon in the Menu Bar, choose "Create Network, that is for Computer to Computer, then shortly there after, the other one will "see" it.
In System Preferences>Sharing, turn both Personal File Sharing &Personal Web Sharing to advertise the fact.
For full access, sign in from Computer #1 with Computer #2's Username & Computer #2's Password & vice versa.

Wifi Authentication Problem in Lenovo K900

Hi,
I am able to connect to wifi at home network. And when I try it at office it is showing Authentication problem and "Not in Range". The password and everything is correct. All my colleagues are able to connect with the same password. I searched online for the solution and there are many other lenovo tab and phone users facing the same problem and I am unable to find the solution. Can anyone resolve this issue and give appropriate answer for this.

This is the first time I'm hearing this issue, I'm also an K900 user but this never happmed to me or my other friends.
Are you sure that's the right password, maybe its case sensitive, because this bug is not present in K900.
Facebook Profile I'm a carefree type of guy but always there to help, so if you have anything to ask don't hesitate.

Two separate enterprise WiFi networks in the same building

I work in a building that currently has Cisco controller based access points. The access points aren't managed by us and are actually part of another campus. We are given access to them but they don't work quite like we want them to. So we are wanting to bring in our own Cisco WLC 2504 with 3702 APs. But when we brought this up with the main campus they said we can't have two separate enterprise wireless networks in the same building. That their APs will mark our APs as rogues and try to shut them down. There was also mention that they can't share the same channel and that the radios will negotiate with each other to determine how much power they need for coverage. But from what I've read none of that is true. So maybe I misunderstanding something and hoping someone here with more experience can shed some light on this. The only reason we would want to keep their wireless in the building is so when their staff come to our office they can use it.
So can two separate WLC/AP systems on different subnets and broadcasting different SSIDs exist in the same building with out causing any issues?

By default, the WLC code does not try to contain rogue AP's. Just lots of alarm's and unclassified rogue's.
In this case you hosts may have actually enabled containment but would have also received a screen full of warning about the public nature of the unlicensed wifi band.
Here the Superior Court system is side by side with the County system even to the extent that the AP's are next to each other. Gets fun. Since each SSID constitutes a rogue, each unit represents a LOT of rogues to report.
Good Luck

How do I sync my two iphones (my wifes and mine) with itunes not to mix apps and contacts

When connecting two iphones after each other the information from one 4s will sync on the second 3gs iphone. How to use one itunes on the same pc with two iphones not to mix every data the both tltphones have? Thank You!

If you have separate windows user profile, each profile will maintain their own data. You can create outlook account for your wife in her profile and your account on your profile, it will not mix up.
Refer to this article for information:
Multiples Devices on one computer:
http://support.apple.com/kb/HT1495

Two types of wifi authentication on 871w

Similar Messages

Maybe you are looking for