Type in artist name to lookup album in store.I get an error R6025 virtual Call and close and shuts down Itunes all together

What can I do to fix My online Store artist seach. I type in a name I get an error R6025 Virtual Call. Then it shut Itune completey down

I have had numerous issues with Itunes 64 bit 11.1.38 (and other previous versions) locking up and crashing upon start with "Itunes has stopped working" or "R6027 pure virtual function call". I have researched the answers around the forums as well as having tried some extensive and repetitious troubleshooting myself and thought I'd list them here... in order of troubleshooting...
1. Install all Windows updates and reboot. This seems to clear issues from time-to-time... I suspect Itunes expects the latest-and-greatest as far as Windows is concerned.. see if this clears your issue.
2. Uninstall all Itunes and Apple products & reboot, remove their directories, remove lingering Itunes registry entries, reboot again, reinstall using "RUN AS ADMINISTRATOR" to install the Itunes executable. See if this allows Itunes to stabilize. Pelase be sure to use the following guide from Apple as far as removing the apps and directories are concerned...
http://support.apple.com/kb/ht1923
3. Remove the contents of the "iphone photo cache" (or other related product photo cache) directory.
4. Try editing the shortcut properties and configure the shortcut (for all users) to run as Administrator.
5. Try editing the shortcut and configure it to run in Compatibility Mode for Windows 7 (for all users).
6. a.Try using MSCONFIG to locate a potential conflicting application or service using the following...
http://support.apple.com/kb/ht2292
or
6. b. Remove the last recent software application(s) you may have installed... in my case removing GREENSHOT http://getgreenshot.org/ stopped my Itunes from crashing on startup and it stabilized after
driving my nuts for weeks.
Message was edited by: DaCheeze

Similar Messages

10.5 will not let me add album name. itunes stops working and shuts down

10.5 will not let me add album name. itunes stops working and shuts down.

I am having this problem. At first with the new iPhone 5, and then with the iPad 2. I am not sure why this is happening.
My gut feeling is this is an iO6 issue and here's why -
The problem mainly occurs with apps. I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them. The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage. It required me to restore the iPad 2 from backup. With this restore the same issues occurred - putting the apps back on the iPad would hang up. The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
My solution has been to soft reset the device, restart Windows, and continue the process until it's complete. This is remarkably inefficient and time-intensive but everything works with patience.
I have been wondering if others have had these same problems.

HT201262 i keep getting an error message when trying to sync my iphone in itunes, "duplicate file name specified." Anyone have any help? Please??

i keep getting an error message when trying to sync my iphone in itunes, "duplicate file name specified." Anyone have any help? Please??

You can try going to iTunes with your device connected, select your device, then click view, show duplicate items

I can't search a song or an artist. i get an error R6025/pure virtual function call. then itunes stops working. PLEASE HELP

I can't search a song or an artist without getting an error R6025 - pure virtual function call. Then itunes stops working. How do I fix it? PLEASE HELP

I have had numerous issues with Itunes 64 bit 11.1.38 (and other previous versions) locking up and crashing upon start with "Itunes has stopped working" or "R6027 pure virtual function call". I have researched the answers around the forums as well as having tried some extensive and repetitious troubleshooting myself and thought I'd list them here... in order of troubleshooting...
1. Install all Windows updates and reboot. This seems to clear issues from time-to-time... I suspect Itunes expects the latest-and-greatest as far as Windows is concerned.. see if this clears your issue.
2. Uninstall all Itunes and Apple products & reboot, remove their directories, remove lingering Itunes registry entries, reboot again, reinstall using "RUN AS ADMINISTRATOR" to install the Itunes executable. See if this allows Itunes to stabilize. Pelase be sure to use the following guide from Apple as far as removing the apps and directories are concerned...
http://support.apple.com/kb/ht1923
3. Remove the contents of the "iphone photo cache" (or other related product photo cache) directory.
4. Try editing the shortcut properties and configure the shortcut (for all users) to run as Administrator.
5. Try editing the shortcut and configure it to run in Compatibility Mode for Windows 7 (for all users).
6. a.Try using MSCONFIG to locate a potential conflicting application or service using the following...
http://support.apple.com/kb/ht2292
or
6. b. Remove the last recent software application(s) you may have installed... in my case removing GREENSHOT http://getgreenshot.org/ stopped my Itunes from crashing on startup and it stabilized after
driving my nuts for weeks.
Message was edited by: DaCheeze

I'm trying to email a photo from my iPhoto album, but I'm getting an error message that says "The email server didn't recognize your username/password combination." Any ideas? I can't find any help in Apple on-line support.

I'm trying to email a photo from one of my iPhoto albums, however I'm getting an error message that says "The email server didn’t recognize your username/password combination." Any ideas? I can't find any help in Apple on-line support.

Never mind. I was able to find the solution via an earlier post from West. Thank you!

When setting up my apple id for the apple store I get to the credit card screen and it tells me I have to contact support to finish. I can't seem to contact support as there is no number for them on this type of issue.

When setting up my apple id for the apple store I get to the credit card screen and it tells me I have to contact support to finish. I can't seem to contact support as there is no number for them on this type of issue. How the **** to I talk to a person who can fix this?

It's a real problem when you're deployed outside the US and your billing address, though totally correct, is not. This seems to be a common complaint. I think the billing address vs. your present location causes some security concern or similar nonsense that prevents progress.
The only way I know of to resolve this is to contact iTunes Support by email. I have never had to wait more than a day for a response:
http://www.apple.com/emea/support/itunes/contact.html
The response should not be "automated'. Explain your circumstances. You deserve a personalized response.

HT1473 When I add a audio CD to iTunes it doesn't keep it under one album cover like it does when I purchase an album from the store. That creates a lot of clutter. How can I keep it all together?

As above.

For reasons known only to apple, the main sort priority now is the artist. ANd when you have a compilation album you end up with multiple 'albums' that are really one. You can right click on the songs and edit the info for each song, making the info right for all of them.....it may not be perfect but it works for me. (My music is all ripped from cd's and not downloaded from Apple)
In your case, you could mark each song as 'various artists' and then they'll all be under the same cover

Changed 'artist' name--lost their albums!

i changed one letter from lower case to upper case & all albums for that artist disappeared. 'undo' was not an option. these are wav & mp3 files of live music i downloaded from a digital recorder. how can i restore the albums? thanks!
Mac OS X (10.3.8) itunes 6.0.2

thanks for helping. the songs are not deleted, but the albums were. i had maybe 30 albums containing almost 1,000 songs.
Check your iTunes music folders in finder. Songs are
very rarely deleted unless you specifically do so.
Try typing the names of certain songs into finder.
Hope it works,
Audrey
Mac OS X (10.3.8)
Mac OS X (10.3.8)

Artist name for compilation albums (No album for artist alone present)

When I have a compilation album, fe Route 66 (including a song from Steppenwolf) and a Steppenwolf album (Steppenwolf : 16 greatest hits), i can see Steppenwolf in the 'artist view', and see the 2 albums.
When an artist only appears on a compilation album, but no individual album, the artist is not detectable in the artist view (except when using the search function).
Can this be solved ?
Thx in advance
Jan

THANK YOU!
I see the Album Artist tag from Windows file properties but not from within my tag editing programs. Granted, I've had these since probably 2003-2004ish, perhaps the Album Artist tag wasn't around at that time? I'm really unsure, I just know that they do not exist with any of my editors.
I highlighted all songs in the album folder, right clicked, hit properties, and set Album Artist for all songs. They now all show up under album art entry.
This problem has been killing me for months and I have a couple albums I've been missing on my iPod because of it. All is good now, thanks again!

I recently updated my iphone 4 and some of my music doesn't appear in artists but appears in albums, how do i get the songs to show up in artists as well?

***???

There are usually two things that contribute to songs not appearing under Artist on the iPod, both due to information either in or missing from the Get Info>Info tab against the song in iTunes. 1) the song is marked as part of a compilation or 2) the song has no album name associated with it.
If the tracks are ticked in the Get Info>Info tab as part of a compilation, they will not appear under Artist on the iPod. Highlight a song in iTunes that you know is not appearing correctly on your iPod. Right click on it and choose Get Info and click the Info tab (alternatively choose Get Info from the File menu), if "Part of a Compilation" is marked untick it and afterwards update your iPod, you should find it now appears as normal. Setting "Compilations" on your iPod main menu prevents you getting lots of single artist entries when you load an album by various artists.
Also if tracks are missing an Album name in the Info tab, this information needs to be filled in. The no album one is a bit quirky as the songs will appear under certain circumstances (for instance I read somewhere that if you have at least two tracks with different album names the rest will appear), however the simplest remedy is just add None or Miscellaneous to all the blanks in place of a title. See this link for more detail: I don't see some of my songs when browsing by artist on my iPod

I have Windows 7. When I try to print an album cover on a CD I burned, I get an error message that there is a problem and it shuts down iTunes and says will notify me once the problem is fixed

I have iTunes version 11.3.1.2 and a Windows 7 Professional aith Service Pack 1. When I try to print a CD cover from a disc I burned, I get an error message that stops the printing task and shuts down iTunes and tells me once the problem is found they will notify me. When this happened before I got sent a message from Apple that I needed to install a new verion of iTunes. I believe I now have the latest iTunes version. So why can't I print?
Is this the problem below? Does the graphics driver cause the problem?
Solve a problem with NVIDIA Graphics Driver
NVIDIA Graphics Driver has stopped working properly.
A driver update, if available, might prevent this problem from recurring.

Try a different media. I have good luck using Maxell discs.

Invalid column name in my trigger -- why do I get this error?

I have a table called ConfNums_Exec which contains a column named ReportType (varchar(50)). Here is the trigger I am trying to create but get the error that ReportType is an invalid column. What am I doing wrong?
create trigger dbo.ins_ExecConfNums on dbo.ConfNums_Exec for insert as
if ReportType <> 'Exec'
Begin
rollback tran
raiserror('ReportType column can only contain text Exec', 16, 1)
End
return
Thanks
Rich P

Hi, try please :
create trigger dbo.ins_ExecConfNums on dbo.ConfNums_Exec for insert as
declare @ReportType varchar(50)
select @ReportType=ReportType from inserted
if @ReportType <> 'Exec'
Begin
rollback tran
raiserror('ReportType column can only contain text Exec', 16, 1)
End
return
PLEEEEEEEASE! Don't post such bad examples. A trigger fires once per statement, and a trigger must be able to multiple-row operations. Since you hang out a bit in these forums, you should know this by now. Here is a good version of the trigger:
create trigger dbo.ins_ExecConfNums on dbo.ConfNums_Exec for insert as
IF EXISTS (SELECT * FROM inserted WHERE ReportType <> 'Exec')
Begin
rollback tran
raiserror('ReportType column can only contain text Exec', 16, 1)
End
return
An even better solution would be a CHECK constraint:
ALTER TABLE dbo.ins_ExecConfNums
ADD CONSTRAINT dbo.ConfNums_Exec_ck (CHECK ReportType = 'Exec')
Erland Sommarskog, SQL Server MVP, [email protected]

My MacBook Pro crashes when I go into Powerpoint slideshow mode and I get an error message to resave and give it another name. I updated the powerpoint based on using the help update but get the same problem....please help!

I updated to Mavericks and since then my powerpoint no longer works when I want to start the slideshow mode. Help!

http://answers.microsoft.com/en-us/mac/forum/macpowerpoint?tab=Threads

Artist name not showing up in itunes

I just imported an album and the artist names didn't appear in itunes. So, I selected all the songs and added the artist names in the Get Info window. They still don't show in the list on itunes, but they do now show in the info windows of individual songs. Ideas? Here is how the artist names are listed: Frances Clark, Louise Goss, Sam Holland
Thanks in advance!
Susanne

Susan,
Try this:
1. Select all of your songs, (click the first song then hold down shift and click the last song).
2. Once that is done right click the highlighted songs and click get info.
3. A message will pop up asking if you want to change info for multiple songs select yes.
4. Once your in this get info screen go to the album artist field and type in all of the artists in that field (make sure you put them in the order you want to see them listed in the itunes libary).
5. When your finished select ok and you're done!
(NOTE: *an easy way to see the album artist is by going to the top of the itunes window and you should see three buttons with the word view under them and select the middle button, now you can view all of your albums songs & artwork under the artwork should be the artists name(s).)
Hope this helps,
DJFX

When I add artists to my ipod/iphone the artist name displays twice

When I go to add artists as a group to my ipod nano or iphone 4, the artist name comes up twice spelt differently. eg I see, "Black Eyed Peas" and "The Black Eyed Peas" from the Artist check list. Please note these songs are not on my iphone/ipod yet, this is me merely looking to select and add them to my iphone/ipod. Some of the songs I have by The Black Eyed Peas are from different albums but I have ensured they are all sorted by "The Black Eyed Peas" under "Get Info". I've also set the tracks to be 1 of 14 for one album and 1 of 1 for the songs that I got from compilation CD's.
I've found multiple help pages but none of them fixed the issue I am having. I am using iTunes 12.0.1.26 for windows 7. Can anyone fix this? It's itunes that's the issue it's not the device I am tying to sync it to.

The same thing happened to me when I updated to the new software when iPhone 4S came out.

Type in artist name to lookup album in store.I get an error R6025 virtual Call and close and shuts down Itunes all together

Similar Messages

Maybe you are looking for