"Type of Device" in Device Category

Hi,
I could find "Only Device Info records Permitted; Multiple Ser. No. poss." as one of the options in the field "Type of Device" of
the Device category.
This means that system would allows us created only Device info Record for this device Category but same serial number can be used more than once.
I like to know, in which cases, this option would be useful ?
Regards,
Sathyadeep

Here is the answer,
This option is used by the retailer, when devices of different distributors are used. So, there are chances for, devices of same category from different distributors, having same serial number.
But unfortunately, system allows to create same serial number device info records with same service provider more than once. There is no check.
Regards,
Sathyadeep

Similar Messages

How to assign an output type to an Output Device?

How to assign an output type to an Output Device?
I'm using SSF_GET_DEVICE_TYPE to get the device type. But for that device type there is no output device configured. How to do that one. I'm getting the output type as PDF1.
Please help me.

Hi,
Guess u need to maintain it in SPAD transaction.
Cheers
VJ

Not able to select "all devices" in device selector

I am having a problem selecting "all devices" in device selector in most cases in lms4.1. When selecting "all devices" it show up zero. Instead i have to choose "device type groups" and this takes about half a minute to show up. In some cases I am able to select it, but in most cases I am not. For instance :
Reports > Inventory > Management Status>Credential Verification Errors

Hi
The problem is now solved. But I had to do alot of reinstalling of lms to fix this. In our case it seemed like there was some sort error when importing devices from file when upgrading to a new release of lms 4.1. and 4.2 which we are now running.
I also had the same assumptions as you when it came to the domain. And this was also the reply I got from TAC.
To solve this I had to first delete all devices from the new lms installation that had some sort of fail under "inventory -> device status" Either not supported, faulty backup og not able to collect inventory. Then I did a export devices under "add/import/manage devices". Then I returned to a previous snapshot of the server from before I imported the devices the first time and then imported the devices that are 100% compatible again.
Now i am manually adding the devices that where first deleted.
In our case it might have been sufficient to just delete the devices with faults, but I cannot confirm this.
Now I have not seen this issue for 4 days, and earlier I had to restart the server every day. So I am very hopeful
This issue appeared when we first tried to upgrade from lms3.2 to lms4.1. And we used an import file of the devices instead of the backup from from lms. When we also tried to upgrade to 4.2 this issue still came back. We have installed lms4.2 on a standalone server with VMware and the linux versjon.

Unable to initialize capture device and device control in HDV

I shot with a Sony HVR-Z1U/Z1N and am using a Sony HDV 1080i tape deck to digitize.
I recently purchased a MacBook Pro and installed FCP Pro 5 on it. After getting over some time code issues we were chugging along, when on the 4th tape the image on the log and capture screen suddenly dissapeared (I could get audio and could see the image on the tape deck). Well after taking the tape out, checking and rechecking it I popped it back in and ever since then, I have been getting this error mssg "Unable to initialize capture device and device control."
I have tried deleting the preferences and starting from scratch. If I do that, and choose the easy setup with HDV- 1080i60, it gives me this error "Unable to locate the following external devices- HDV (1440 X 1080) 30fps.
I upgraded to FCP 5.1.2 this morning and upgraded the OS to 10.4.7 and QT to 7.1.3 and still no change.
Im at my wits end, Ive been working on this for a whole week now.
Thank you,
Bugs

It has been reported to take more than one attempt to correct the installation but, if properly executed on a machine without other system problems, the QT reinstall process does work. The key element here is you must reinstall QT after you trash the receipts. The process is listed below.
x
To do a full quicktime reinstall.
Go to /library/receipts and delete any files that say Quicktime followed by a number e.g. Quicktime703.pkg
Go to the Apple quicktime site and download the appropriate version of Quicktime to your hard drive.
Run the Quicktime installer.
Repair Disk Permissions for your System Disk (Disk Utility > Select the system disk > Repair Disk Permissions)
Reboot
If this doesn't work, then the problem lies elsewhere:
1. your system - user preferences, firewire ports or other system elements.
2. your equipment - camera/deck/firewire cables.
3. your process - not setting up the software properly or using the software erroneously.
Listed below is a troubleshooting process. Not all steps are appropriate but the general process of isolating the problem is useful.
Troubleshooting Steps for OS X
by Jan Johannsen (Collected from: Apple>User Tips Library>User Tips Contributions forum)
FIRST AID
01 Completely shutdown, wait a 5 minutes, restart
02 Make sure you're not running out of free space on the System volume
03 Check/fix the filesystem using Disk Utility &/or Diskwarrior
04 Repair permissions using Disk Utility
05 Create a new user account, and see if the problem persists there
06 Clear system & user caches
07 Run FCP Rescue
08 Unplug all USB, Firewire devices except Apple mouse
09 Startup in SafeBoot mode, and see if the problem persists there
10 Reset system firmware
MORE SERIOUS TROUBLESHOOTING
11 Reapply the latest combo updater
12 Run the Apple hardware diagnostic CD
13 Check the hard drive for bad blocks
14 Take out 3rd party RAM
15 Unplug 3rd Party PCI cards
16 Reset PMU
17 Archive and reinstall the OS
18 Reinstall the system from scratch
19 Send the machine back to Apple

Qosmio X770: 4 nVidia HD audio devices in device manager

So i have a few questions...
In my device manager i have [this (screenshot)|http://i.imgur.com/NfH5E7p.jpg].
So i have (!) 4 nvidia hd audio and 1 hd realtek audio.
I usually update my nvidia video driver and nvidia hd audio driver is updated every time with it.
But not long ago i decided to find any other updates to my drivers, cause bloody toshiba (we call it that way in Russia) is too lazy to support their laptops. And [found this:(realtek hd R2.70 codec driver )|http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level= 4&Conn=3&DownTypeID=3&GetDown=false].
Installed it, everything is working fine so far. It is for realtek alc269 (and also many other devices, but for us only alc269 matters) which is the real name of realtek hd audio device in x770 laptops (i checked in program aida64, previously known as everest).
So now i have [this (screenshot)|http://i.imgur.com/6HM5mLj.jpg]: version 6.0.1.6662 date 19.06.2012
The previous version that lazy toshiba was glad to provide us with - 6.0.1.6360 [(screenshot)|http://i.imgur.com/dUQiPA0.jpg]
So the questions are:
1. Why i have FOUR nvidia hd audio devices in device manager?
2. How can i make nvidia hd audio my primary audio device? Or maybe they are some kind of virtual devices or smth like that.
3. Do you think the idea of installing driver directly from realtek website was bad? There is a disclaimer on their site: To be sure you obtain the full features/customizations provided in your original audio product, please download the latest drivers from your system/motherboard manufacturer's website.
So i invite everyone to test this audio driver with me :)
And a few more things.
In one topic i found this info: moreover, myself and other users of this forum have overclocked their cards from 657/1300/1200 to 800/900/1600 and are very pleased with the results, so try not to overexaggerate
(it is a quote). So I will be happy if someone gives me link to some kind of manual about overclocking 560m gt from our beloved x770.
Also I found a lot of topics about nvidia drivers with angry customers. I don't remember when i first updated video drivers, but i've never had problems with them. When the situation changed? As far as i can understand in 2011 you could't install nvidia drivers directly from nvidia website.
P.S. sorry for my english, i'm from Russia. Also there is some russian on screenshots, hope it won't make your eyes bleed.

At first i want to "thank" moderator about renaming my topic. Original name was: realtek vs nvidia hd audio x770 + update r2.70 question. Where is 2.70 part in the current name? Ok.
Second. To Tonny: I'm not lame user, no need to explain me obvious things).
> {quote:title=Tonny wrote:}{quote}
> > How can i make nvidia hd audio my primary audio device?
> I dont understand why you want to make an device primary?
> What is the purpose for that?
>
> If you want you can set the sound devices as default device in Control Panel -> Sound -> Playback tab
> Click on the device and choose default.
If there is nvidia hd audio device and it's not some kind of virtual device or controller, i want to test it like primary audio device. Simple curiosity. I love flac etc.,
So I always try to improve sound. And alc269 we have in x770 is also installed in my ANCIENT asus eee pc, so it's very depressing. Also your advice about control panel - sound is not working, i think you know why... There's only speaker device working on realtek hd audio.
> {quote:title=Tonny wrote:}{quote}
> You can use the driver from Realtek since the sound chip is from Realtek.
Yep, of course, but it's my 5th laptop and also i have 2 netbooks (i'm speaking only about portative devices, not pc). I tried to update drivers manually numerous times on my previous devices, and I learned a lesson, that if you install new driver (not from you laptop/whatever support page, but directly from device manufacter's website ) and even if you are absolutely sure that driver is compatible with you device there can be problems. For example, as i've already said realtek alc269 is installed in my qosmio x770 and in my super old asus eee pc. And driver is the same.
Also realtek driver support page has disclaimer: To be sure you obtain the full features/customizations provided in your original audio product, please download the latest drivers from your system/motherboard manufacturer's website. (already was in op-post).
So I only tried to hear from those who has already installed r2.70 realtek update or maybe tested it some way. But the moderator made it impossible renaming the topic.

IPad2 on Windows 7 : MTP USB Device = This device cannot start. (Code 10)

Hi Guys,
I want to access to the Internal Storage of my iPad 2 on Windows 7.
But I have an error with the MTP USB Device => This device cannot start. (Code 10)
So I cannot see my iPad in Windows Explorer.
I tried many actions from Forums :
update the driver to the "Apple Mobile Device USB Driver" located in "C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers"
delete the upper and lower filters in REGEDIT : {36FC9E60-C465-11CF-8056-444553540000}.
stop and restart the service "Apple Mobile Device"
But as soon as I connect again the iPad there is the same error message after Installing device driver software => "Device driver software was not successfully installed" : MTP USB Device : Fail
Is there someone who get the solution ?
Thank you for you help
Stephane

I have a similar problem, only mine is Code 31 for the MTP USB Driver. The Apple driver loads fine, and I'm able to sync with iTunes, but I can't connect to the device as a drive and copy the photos off of it.
I've tried nearly everything at this point that has been suggested in other threads, and nothing has seemed to work.

ISE Using my device Portal , devices still in pending registration status

Abstract:
I'm on ISE 1.2 patch 8.
We want give access wireless to devices mobile using 802.1x with Active Directory. The condition is that he previously the user must register mobile device in "my device portal"
-The corporate user connected from the LAN network, login in "my device portal" using their active directory account and register your device.
-The policy defined in ISE indicates that 802.1x users in a group of AD and over condition "RegistredDevices" can access to the network (see screen 1)
-Users access the wireless network from your mobile device by entering its name from AD and finally accesses the network.
-From my "devices portal" devices always shows “Pending” status. All works as expected except for this situation.
Can you please help?
Regards,
Marco Muñoz

It looks like you dont have any provisioning profiles configured.
Under Admin settings make sure client provisioning is enabled. Try to set native supplicant provisioning policy unavailable: to Allow Network Access.

Cannot use device IOUSB Device: The connected device requires too much power.

Cannot use device
IOUSB Device: The connected device requires too much power.
This is the message I get when connecting a camera on binoculars to ipad. Is there a work around the camera will also load to a SD card

There are a few options:
1. If your camera supports it, you can try a low power mode, or picture transfer mode so it does not attempt to charge from the iPad. some cameras have this.
2. You can add a powered USB hub between the iPad and the camera, so the camera uses the usb hub's power instead of trying to charge from the iPad.
3. You can get the SD card reader and read the photos direcltly off of the card instead of through the camera.
Depending on model of iPad:
http://store.apple.com/us/product/MC531ZM/A/apple-ipad-camera-connection-kit
or
http://store.apple.com/us/product/MD822ZM/A/lightning-to-sd-card-camera-reader

Missing Imaging Device in Device Manager (can't use webcam)

I can't find Imaing Device in Device Manager. I can't use the camera because the driver is missing. Is there a url link to the download page? It's very complicated to find what I need on this website.

@jameshj ,
Hello and thank you for posting on the HP support forums. Here is the link for your systems only supported software and drivers.
P ENVY 17-j013cl Notebook PC Drivers
I hope this helps you. Thanks you again for posting.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

I have several groups on my Mac Address Book and would like to sync only one group to each IOS5 device (each device getting a different group). Is this possible?

I have several groups on my Mac Address Book and would like to sync only one group to each IOS5 device (each device getting a different group) via iCloud. Is this possible? If so, how is it done?
Thanks in advance,,,,,

Can we control syncing at all? I can't seem to make a Local/On My Mac group in Address Book.

Add device, discovery device, configure and trobleshoot device

Hi
I am new on network management, and I installed cisco prime 1.2 this week
I need to perform these action on the ISE and on many catalyst switch
- Add device
- discovery device
- Monitor, configure and trobleshoot device
Which information should I ask to the network administrator (snmp version , ip address ...)
How should I perform thses 3 action (any step by step document should be good for me)
Regards

Hi,
Chekc the below links:
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.2/user/guide/gettingstarted.html#wp1069890
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.2/user/guide/gettingstarted.html#wp1070951
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.2/user/guide/gettingstarted.html#wp1070638
Thanks-
Afroz

HT1430 Iphone 5 OS 6.1.1, When I turn off or restart device, this device automatic unmute. How can i config this problem?

Iphone 5 OS 6.1.1, When I turn off or restart device, this device automatic unmute. How can i config this problem?

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

Timed out waiting for device sys-subsystem-net-devices-enp69s0.device

Hi all,
Since quite some time I have been waiting for Arch Linux to startup (and shutdown), and today I wanted to figure out what was going wrong. I found out that I could find the boot log file with journalctl, and this seems to be the issue:
Oct 13 21:01:52 localhost systemd[1]: Job sys-subsystem-net-devices-enp69s0.device/start timed out.
Oct 13 21:01:52 localhost systemd[1]: Timed out waiting for device sys-subsystem-net-devices-enp69s0.device.
Oct 13 21:01:52 localhost systemd[1]: Dependency failed for dhcpcd on enp69s0.
Oct 13 21:01:52 localhost systemd[1]: Starting Network.
Oct 13 21:01:52 localhost systemd[1]: Reached target Network.
Oct 13 21:01:52 localhost systemd[1]: Mounting /mnt/homesrv/storage...
Now, enp69s0 is my LAN network interface, which I barely use, and my WLAN connection is handled by NetworkManager. However, I can't find out what I'm supposed to do to stop this behaviour. I tried:
systemctl disable sys-subsystem-net-devices-enp69s0.device
But that does not seem to solve anything. Can anyone help me out?
Last edited by Hmail (2013-10-13 19:09:53)

Andreaskem wrote:Maybe try "systemctl disable [email protected]".
That did the trick! I didn't want to disable the device because I might use it once in a while.
The shutdown issue is not solved yet, but that seems to be an issue with a samba share that is unmounted after the network services are shutdown. I'll delve in the wiki to figure out how to fix that. But for now, I can at least start my machine up within seconds. Thanks a lot!

Device Location & Device in IC web client

Dear Experts ,
Can any one tell me what settings are required to maintain Device & Device Location in IC Web Client (CRM 7.0)
Currently I am able to see the Connection object,POD & premise in IC Web CLient
But I am not able to see the Device Location & Device in IC web client
Please help me in this.
regards,
Sagar

Hello Asmitha,
Here is couple links of "How to", The excel code I used and it woked.
Excel links
http://support.microsoft.com/kb/234774
http://forums.msdn.microsoft.com/en-US/netfxjscript/thread/3a3f7161-3581-47d1-a79c-98c0351ece38/
Word Link
http://support.microsoft.com/kb/286023/en-us
Good Luck
Eli Steklov
Please Reward Points if it Helepd

HT201441 I bought an iphone 4 few years ago, I know nothing now about the person sold me the device.the device is linked to his email.what I do?

I bought an iphone 4 few years ago, I know nothing now about the person sold me the device.the device is linked to his email.what I do?
I lost connection with the persn sold me the device

Hello elabbady2002
The only option you have when it comes to Activation Lock is trying to get in contact with the previous owner, as they are the only one that can remove it.
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/TS4515
Contact the previous owner and ask them to follow these steps to remove the device from their account:
Sign in to their iCloud account at www.icloud.com/find.
Click All Devices to open a list of devices linked to their account, then select the device to be removed. It should show a gray dot or the word “Offline” next to the device name.
Click "Remove from Account" to remove the device from their account.
After the device is removed from the previous owner’s account, turn the device off by pressing and holding the Sleep/Wake button located on the top-right side of the device. Then restart your device and proceed with device setup as you would normally.
Regards,
-Norm G.

"Type of Device" in Device Category

Similar Messages

Maybe you are looking for