UAG Certificate Enrollment Error, Logon Failure.
Hi All,
I have been configuring UAG with the help of TLG provided online. On one machine I have to enroll
IP-HTTPS listener certificate. For that i have followed following steps.
Run > mmc > files > Add/Remove snap-in > certificate
on the new window I select computer account then next
then Local Computer Then Finish.
Now, Right Click on the details Pane All Tasks > Request New Certificate > AD Enrollment policy
Now After Clicking Next I am getting Error
Enrollment Error
Logon Failure : Unkown Username or Bad Password.
Recently I have change only this system's password (System Name UAG2SERVER)
Can anyone please help.
Hi,
have you created a rule in the TMG console to allow all traffic to your CA? Otherwise the cert enrollment will fail.
I don not understand what you mean with that you have changed the system password. Are you logged in with an domain account?
regards,
Lutz
Similar Messages
-
System Error: Logon failure: unknown user name or bad password
Hello experts,
my system NW2004s (SPS14.1) is producing a lot of the following error messages caused by the internal user Guest... The system user Guest has all the necessary rights using a service user.
*getting mapped math - java.io.IOException: Logon failure: unknown user name or bad password*
at java.io.WinNTFileSystem.canonicalize0(Native Method)
at java.io.Win32FileSystem.canonicalize(Win32FileSystem.java:333)
at java.io.File.getCanonicalPath(File.java:513)
at com.sapportals.wcm.repository.util.file.StdFileImpl.getCanonicalPath(StdFileImpl.java:74)
at com.sapportals.wcm.repository.util.file.StdFileImpl.getCanonicalFile(StdFileImpl.java:70)
at com.sapportals.wcm.repository.manager.sfs.FSRepositoryManager.startUpImpl(FSRepositoryManager.java:141)
at com.sapportals.wcm.repository.manager.AbstractRepositoryManager.start(AbstractRepositoryManager.java:538)
at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.tryToStart(CrtThreadSafeComponentHandler.java:246)
at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler$1.run(CrtThreadSafeComponentHandler.java:252)
at java.util.TimerThread.mainLoop(Timer.java:432)
at java.util.TimerThread.run(Timer.java:382)
I am not sure about the severity of the error. I can observe the error message almost every minute in the Log file and I have the impression that this message occours more often before the portal has more "problems" in general and is for a short time not accecible (it freezes and sometimes a java server restarts itself). I am asking myself if this error message could give a hint for the system crash we have had today. (a restart of the host was needed.)
However I would like to know what causes the error message?
It is a critical error message? It means can it cause a system crash? Or is it not important?
What can I do to solve the problem?
I appreciate your helful answers.
Thanks in advance.
ThomasI think the password for the proxy account needs to be changed (expired)
Arthur My Blog -
Certificate Enroll Errors RPC Server Is Unavailable
I have a scenario in which I would like some advice before moving on. We have a Server 2012 root CA that was put in about a year-year and a half ago and at the same time there was another 2008 R2 root CA that was installed on a DC that was hosting FSMO roles.
Well that DC started to die so we transferred the FSMO roles and removed certificate services. However, we only uninstalled the role but as I understand, there is a bit of cleanup to do in AD beyond just removing the role. So when we started to perform the
first step, I noticed remnants of old servers that are no longer around. I've discovered that our previous admin had made 3 other servers (I believe all 2003) that have all completely gone away and yet are still listed in the Trusted Root Certification Authorities
on all computers and I find in the event log the following error when I log in to our domain machines of them trying to contact each of the old CA servers:
Certificate enrollment for Local system failed to enroll for a Machine certificate with request ID N/A from server.domain.org\server (The RPC server is unavailable. 0x800706ba (WIN32: 1722)).
Now I have no way of knowing whether or not this admin actually properly removed the role before decommissioning these servers and I have no idea why we needed so many servers to be root CA's in the first place? Anyhow, I was wondering if the proper procedure
would be to remove the root trusted certs from group policy and then clean up the remnant entries in AD as described in the Microsoft documentation of removing a root CA from your environment. I still see some errors and machines requesting to check for stuff
like CRL with the most recent root CA that we removed so I just wanted to check to see if all of these errors will go away once we finish the cleanup and if there is anything special that needs to be done for the potentially orphaned root CA's. We did take
a backup of the 2008R2 CA (the one that was on the dying DC) before we removed the role and I have confirmed that our production CA (the one that we would like to remain in production - is a sub CA of an offline root) has already issued new machine and DC
certs to our domain machinese and domain controllers.
Sorry for the lengthy post. Please let me know if any more information is required and thank you in advance!Hello,
the root CA normally is the first one in a forest issuing the certificates for the subordinate CAs if required or for certificates.
http://technet.microsoft.com/en-us/library/cc731183.aspx
SO there is no need for multiple root CAs.
To get rid of everything old and be sure the CA is configured correct for your needs I suggest to ask this in
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserversecurity
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights. -
ADCS certificate enrollment error with RPC
I'm attempting to enroll in a computer certificate that works for a windows clients (W7), but not for the Apple (OS 10.9.4) clients. I've been using the following document, with no success (http://support.apple.com/kb/HT5357). The enrollment is being attempted from a mobileconfig generated from an OS X server. The payload is limited to only ADCertificatePayload to limit how much to troubleshoot. We are also limiting the enrollment to a single Issuing CA to limit where to look for communication. I greatly appreciate any assistance you can provide.
This is the ManagedClient.log from /Library/Logs:
+||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| |||||||||||||||||||||||||||||||||||||||||||||||||||||||
Sep 3 13:44:20[562:1]:+|||||||||||||| Calling installPayload on plugin: ADCertificatePayloadPlugin ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Sep 3 13:44:20[562:1]:+|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Sep 3 13:44:20[562:1]:+ADCertificatePayloadPlugin.pdp_pluginInstallPayload
Sep 3 13:44:20[562:1]:+ADCertificatePayloadPlugin scheme overrides HTML to use RPC; scheme = (null)
Sep 3 13:44:20[562:1]:+ADCertificatePayloadPlugin using RPC = YES
Sep 3 13:44:21[562:1]:+ADCertificatePayloadPlugin.boundADInformationWithError dict =
computerID = AppleWorkID;
domainName = "FQDN.com";
name = domainname;
subject = "/CN=AppleWorkID.FQDN.com";
Sep 3 13:44:21[562:1]:+ADCertificatePayloadPlugin.credentialsForDomain domainname = domainname; username = AppleWorkID$
Sep 3 13:44:21[562:1]:+ADCertificatePayloadPlugin.getCertificateFromServer
Sep 3 13:44:21[562:1]:+GetCertificateFromCAServer credentials username = AppleWorkID$
Sep 3 13:44:21[562:1]:+GetCertificateFromCAServer gss_aapl_initial_cred status = 0
Sep 3 13:44:21[562:1]:+GetCertificateFromCAServer running as euid = 0
Sep 3 13:44:21[562:1]:+GetCertificateFromCAServer ca_name = IssuingCA
Sep 3 13:44:21[562:1]:+GetCertificateFromCAServer servername = IssuingCA.FQDN.com
Sep 3 13:44:21[562:1]:+GetCertificateFromCAServer cert_template = AppleWorkstation
Sep 3 13:44:21[562:1]:+GetCertificateFromCAServer csr length = 624
Sep 3 13:44:21[562:1]:+Using RPC authn_level: 6
Sep 3 13:44:21[562:1]:+GetCertificateFromCAServer partial_string_binding = ncacn_ip_tcp:IssuingCA.FQDN.com[]
Sep 3 13:44:21[562:1]:+GetCertificateFromCAServer using principal name: host/IssuingCA.FQDN.com
Sep 3 13:44:21[562:1]:+GetCertificateFromCAServer dwFlags is ff
Sep 3 13:44:21[562:1]:+GetCertificateFromCAServer Calling CertServerRequest...
Sep 3 13:44:21[562:1]:+GetCertificateFromCAServer CertServerRequest return pdwRequestId = 0
Sep 3 13:44:21[562:1]:+:::::::::::::::: GetCertificateFromCAServer ERROR: CertServerRequest exception name :
Sep 3 13:44:21[562:1]:+:::::::::::::::: GetCertificateFromCAServer ERROR: CertServerRequest -2147024809
Sep 3 13:44:21[562:1]:+ADCertificatePayloadPlugin.getCertificateFromServer server returned cert = FAILED
Sep 3 13:44:21[562:1]:+**************** AD certificate getCertificateFromServer failed
Sep 3 13:44:21[562:1]:+:::::::::::::::: ADCertificatePayloadPlugin.pdp_pluginInstallPayload returning = -319
Sep 3 13:44:21[562:1]:+ADCertificatePayloadPlugin.pdp_pluginInstallPayload returning = fail
Sep 3 13:44:21[562:1]:+**************** Error: Error Domain=ConfigProfilePluginDomain Code=-319 "The 'Active Directory Certificate' payload could not be installed. The certificate request failed." UserInfo=0x7fbd4157b540 {NSLocalizedDescription=The 'Active Directory Certificate' payload could not be installed. The certificate request failed.} from: InstallPayload in ADCertificatePayloadPlugin
The template, 'AppleWorkstation' template seems to have all the settings set correctly, but I'll go through them all.
General: Both display name and template name = "AppleWorkstation"
Compatability-> CA: Windows Server 2008 R2
Compatability->Certificate recipient: Windows 7 / Server 2008r2
Request Handling->Purpose:Signature and Encryption
Cryptography->Algorthim name:RSA
Cryptography->Minimum key size:2048
Cryptography->Request hash:SHA256
Security: Both the windows and mac domain computer objects have (read,enroll, autoenroll).
Subject Name->Build from this Active Directory information: Subject name format: common name
Subject Name: Only UPN is checked
The schema version of the template is 3 and the version of the template is 100.43
Both computers are joined to the Active Directory 2008 r2 domain. Certificate services exist within the site on their own dedicated servers. The CA's are as follows: 1x 2012r2 for offline root and 2 x Issuing CA's.Hi Alexander,
But by group should work by desing or did I get something wrong
I am not sure that I understand this query correctly, I’ll just put it this way, feel free to correct me if I misunderstood:
Access control assignment on a group will grant corresponding permissions to all members within it, it’s called inherited permissions.
If there is a direct access control entry which assigns permissions to
single security principle belonging to the group, then the direct permissions take precedence, it’s called explicit permissions.
Well, if a security principle belongs to two/multiple groups, and each group gets conflicting permissions, then the more
restricted (deny or not allow) ones take precedence. This rule goes the same with explicit permissions, more restricted ones have higher precedence.
In addition, here are some scripting forums below for you if there are any scripting requirements:
The Official Scripting Guys Forum
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
Windows PowerShell Forum
https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverpowershell&filter=alltypes&sort=lastpostdesc
MSDN Forums
https://social.msdn.microsoft.com/Forums/en-US/home
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] -
I dont understand why Microsoft people can't make things simpler
They are LITERALLY MOTHER F%^%RS
Bill Gate and his team need to learn hot to F^&&IN make things.I agree, the use of profanity is completely unnecessary, we've all been in the stressful situation before, it still doesn't call for it.
The network you're receiving an APIPA IP on, is it the virtual switch you setup when adding the Hyper-V role? If so you can get the warnings to go away and subsequently hide the adapter by unchecking the 'Allow host to manage this adapter' setting
in the virtual network manager of Hyper-V manager on each node.
Tim is also right, while disk resources are only owned by one node, you'll see the mount points for CSVs located under C:\ClusterStorage.
More importantly, you're logon issue sounds directly related to group policy. I had the same problem moving to Server 2012. Yes, it's an annoying process but in the end you will have a working cluster. I did the following steps:
1. Install 'Group Policy Manager' on one of the nodes in your Hyper-V cluster
2. Log on to the node you installed it on with a Domain Admin or appropriately endowed account that can edit the GPO relating to 'Logon as a service right'
3. Edit the GPO where you specify who can logon as a server, OR if you don't have one, make a new one and link it to the OU with the Hyper-V nodes
4. Add permission to that right for 'NT Virtual Machine\Virtual Machine Group', save and exit
5. As an optional step I would reboot the nodes so you make sure they get it
The problem here is that security group ONLY exists on servers that have Hyper-V installed on them. If you add the group on a machine that has it to the GPO, the SID for the group is saved and each Hyper-V host will know what group that is. The
problem you're having right now is most likely related to a GPO changing 'Logon as a service right' to your needs and setup in Group Policy. When a Hyper-V node starts up, it automatically adds the right for that group to the local security policy, however,
group policy's auto refresh will remove it after a certain amount of time. -
I am constantly locked out of my email account with ta message that read: Login Failure. Any thoughts?
Call your email provider or check the provider's web site for the correct settings. Ensure you are using the correct credentials for the email server you are trying to connect to.
Why did you post in the Boot Camp Discussion Community? -
Hi All,
We seem to be being plagued by the error below by our SQL Server agent. This happens almost everytime we restart the server that has been running for a day or two.
Our SQL Server Agent uses a none expiring domain credential. I understand that this problem only happens when the profile being used by the SQL Servr Agent has changed (password change). What puzzles me is that the login is A ok and no changes has been made to it's password.
We always resolve this problem by changing the login used in the SQL Server Agent to local and after that, returning it back to it's original domain login. Unfortunately, we cant always do this everytime something goes wrong.
Can anyone please help us shed a light on this? We're using SQL2k with SP3a. Thanks!
Error:
An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation on the SQLServerAgent service.
Regards,
JosephRan into this error, and the password was correct. What the System Event Log said:
Code SnippetEvent Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7041
Date: 10/8/2008
Time: 9:33:09 AM
User: N/A
Computer: ComputerName
Description:
The SQLSERVERAGENT service was unable to log on as DomainName\SQLAgent with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: SQLSERVERAGENT
Domain and account: DomainName\SQLAgent
This service account does not have the necessary user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, a Group Policy object associated with this node might be removing the right. Check with your domain administrator to find out if this is happening.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp
...sure enough it had been removed from the "Logon as a service" list. Hope this helps. -
Logon failure due to an internal error
Hi,
We have installed XI 3.1 SP3 (plus fixpacks) on a server and I am trying to access Web Intelligence on the client machine. I get the error "Logon failure due to an internal error." Any ideas what the problem may be?
I can login into Web Intelligence when on the server directly using remote desktop. I am on SP3 on the client machine but may not be on the same level for fixpacks - will check. Could that be the problem?
I can access the CMC from the client machine.
ThanksHi All,
I'll start by describing the basic logon connections made by all the client tools when connecting to a Business Objects CMS. From this hopefully it will help resolve the kind of issues described here.
------------------Background------------------
The CMS has a port number (6400). This port number is actually the port number of the name server. This name server stores the name, type of server, hostname and port for all the BusinessObjects servers that exist in the cluster. Whenever a program (such as a client tool) needs to know how to connect to a particular server, the name server will reply with the hostname (or IP) and port number to connect to. When each Business Objects server process starts it will register with the name server and tell it what its connection info (hostname and port) are.
In the case of a client logon it will first connect to the name server and then request the information to connect to the CMS service - (note that the name server and the CMS service are two logicial and seperate functions that the CMS process performs). The CMS service actually runs on the request port of the CMS.
------------------Cause of Logon Failures------------------
If you have no explicitly configured it, the hostname returned for connection could be the fully qualified name OR the short hostname of the machine and the port number will be random (and change each time the process is started). The client ALSO needs to be able to connect to the hostname and port returned by the name server to continue processing. If it can't then you will receive a logon error - in designer/desktop intelligence this will appear as a 'Transport Communication Error' in the deatils of the error message.
------------------Example------------------
You initially connect to boeserver.mycomp.com:6400. boeserver.mycomp.com is a DNS name that the client computer can resolve and the port 6400 is open through the firewall. The client connects to the name server (within the CMS process) and requests the connection information for the CMS services but these have not been explicitly set in the CMC->Server->CMS->Properties page.
The response from the nameserver might be to connect to the short name of the host: boeserver on port 54393 (or some other random port number). You will get a logon error if EITHER the hostname boeserver cannot be resolved (which can be quite common when the boeserver machine is in a different subnet) OR there is a firewall blocking the connection port (54393 in this case).
------------------Resolution------------------
Go to the CMC->Server->CMS->Properties page. Here there is a section where you can specify the hostname with with each business objects server will give as the hostname (or IP address) and port (request port) that it can be contacted on. In the example below I have said that it should be contacted on the fullyqualified name and on port 6401. Again 6401 would need to be open through the firewall.
No two servers can have the same request port. As you can see in the screenshot I have specified to connect to the CMS service on 6401 using the fullyqualified hostname boeserver.mycomp.com and finally that the name server port is the default 6400.
As mentioned previously there may be also other BOE servers that similar settings are required for, depending on the actions you are performing - e.g. IDT and designer need access to the input file repository server to input/export universes, WebiRich Client also should have access to the Output File Repository Server. Client tools should also have access to the Adaptive Processing Server that is running the Client Auditing Proxy Service so that any actions are audited.
One extra thing that can cause a block on the port number, other than a regular corporate firewall is the security on the server machine itself (e.g. the Windows firewall on the server can block incoming requests if there is not an expection created.
Regards,
Graham -
FIM CM Logon failure: unknown user name or bad password. (Exception from HRESULT: 0x8007052E)
Hi,
I am trying to install FIM Certificate management 2010. I am not able to access the CM Web portal. Whenever I login it shows the following error
Logon failure: unknown user name or bad password. (Exception from HRESULT: 0x8007052E)
This is the CM Log
1) Exception Information
Exception Type: System.Runtime.InteropServices.COMException
ErrorCode: -2147023570
Message: Logon failure: unknown user name or bad password. (Exception from HRESULT: 0x8007052E)
Data: System.Collections.ListDictionaryInternal
TargetSite: Void ThrowExceptionForHRInternal(Int32, IntPtr)
HelpLink: NULL
Source: mscorlib
StackTrace Information
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at Microsoft.Clm.Security.Principal.LoggedOnUser.Logon(String userName, String password)
"2014-04-16 02:48:50.98 -07" "Microsoft.Clm.Security.Principal.RevertToSelfContext"
"Microsoft.Clm.Security.Principal.RevertToSelfContext RevertIfImpersonating()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Reverting to the process identity
"2014-04-16 02:48:50.99 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Checking if PCEDOMAIN\Administrator is authenticated
"2014-04-16 02:48:50.99 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
True (is authenticated) PCEDOMAIN\Administrator
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.GlobalASAX"
"Boolean DoesResxFileExist(System.Globalization.CultureInfo)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
DoesResxFileExist
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.GlobalASAX"
"Boolean DoesResxFileExist(System.Globalization.CultureInfo)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Resx exists [C:\Program Files\Microsoft Forefront Identity Manager\2010\Certificate Management\web\App_GlobalResources\WebResources.en-US.resx] for culture: en-US? False
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.GlobalASAX"
"Boolean DoesResxFileExist(System.Globalization.CultureInfo)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
DoesResxFileExist
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.GlobalASAX"
"Boolean DoesResxFileExist(System.Globalization.CultureInfo)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Resx exists [C:\Program Files\Microsoft Forefront Identity Manager\2010\Certificate Management\web\App_GlobalResources\WebResources.en.resx] for culture: en? True
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.GlobalASAX"
"Void Application_BeginRequest(System.Object, System.EventArgs)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Web UiCulture: en-US. Web Culture: en-US
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.Authentication.CustomAuthenticationConfiguration"
"Microsoft.Clm.Web.Authentication.FilteredApplication MapPathToApplication(System.String)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Mapping path: [error.aspx]
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.Authentication.CustomAuthenticationConfiguration"
"Microsoft.Clm.Web.Authentication.FilteredApplication MapPathToApplication(System.String)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Path: [error.aspx] was not found in the configuration section.
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.Authentication.CustomAuthenticationModule"
"Void OnAuthenticate(System.Object, System.EventArgs)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Path: [error.aspx], filtered: False
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.Authentication.CustomAuthenticationModule"
"Void OnAuthenticate(System.Object, System.EventArgs)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Builtin Principal: System.Security.Principal.WindowsPrincipal, Identity: System.Security.Principal.WindowsIdentity
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.Authentication.CustomAuthenticationModule"
"Void OnAuthenticate(System.Object, System.EventArgs)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Builtin Identity Details:
Name: PCEDOMAIN\Administrator
IsAuthenticated: True
AuthenticationType: Negotiate
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Checking if PCEDOMAIN\Administrator is authenticated
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
True (is authenticated) PCEDOMAIN\Administrator
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.Web.Authentication.CustomAuthenticationModule"
"Void OnAuthenticate(System.Object, System.EventArgs)"
"" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Custom Identity Details:
Name: PCEDOMAIN\Administrator
IsAuthenticated: True
AuthenticationType: Negotiate
Ticket:
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Checking if PCEDOMAIN\Administrator is authenticated
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
True (is authenticated) PCEDOMAIN\Administrator
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Checking if PCEDOMAIN\Administrator is authenticated
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
True (is authenticated) PCEDOMAIN\Administrator
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Checking if PCEDOMAIN\Administrator is authenticated
"2014-04-16 02:48:51.01 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
True (is authenticated) PCEDOMAIN\Administrator
"2014-04-16 02:48:51.03 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
Checking if PCEDOMAIN\Administrator is authenticated
"2014-04-16 02:48:51.03 -07" "Microsoft.Clm.BusinessLayer.UserIdentity"
"Boolean get_IsAuthenticated()"
"PCEDOMAIN\Administrator" "PCEDOMAIN\clmWebPool"
0x000014F8 0x00000004
True (is authenticated) PCEDOMAIN\Administrator
ThanksOn Wed, 16 Apr 2014 10:15:55 +0000, Priyesh92 wrote:
I am trying to install FIM Certificate management 2010. I am not able to access the CM Web portal. Whenever I login it shows the following error
Logon failure: unknown user name or bad password. (Exception from HRESULT: 0x8007052E)
1. Make sure that you've got all of the required Kerberos delegation
settings and SPNs setup correctly.
2. Make sure that you've added the portal to Trusted Sites in IE and that
you configure the security settings to for Trusted Sites to log on
automatically.
3. Make sure that you have the password for the CLMWebPool account set
correctly.
Paul Adare - FIM CM MVP
But these are not inherent flaws in [NT]. They are the result of deliberate
and well-thought-out efforts. -- M$ Spokesweenie -
"Logon failure: unknown user name or bad password" even with correct Credentials
I have networked PCs before many times successfully, so this is not my first time trying to network PCs in a home environment. Though I’m wondering if Windows 8.1 is part of the problem.
I would have thought that for sure, until one of the new laptops running W8.1 would not connect to any of the other three PCs/Laptops running W8.1. Yet these other three W8.1 PCs/Laptops CAN connect to this laptop. Then it gets a little more interesting:
this same laptop that couldn’t connect to those three W8.1 PCs/Laptops, CAN connect to a Windows 7 desktop, and a XP Laptop, and those two can also connect back to it without issue. It’s almost like my network is divided in half, and only half can talk to
each other. But then when I thought it couldn’t get any more interesting, I realized the first three W8.1 PCs/Laptops can talk to the others, it’s just that the others (W8.1 Laptop, W7 Desktop, XP Laptop) can’t talk back to them without getting the error,
"Logon failure: unknown user name or bad password” even though the username and password are 100% correct.
I don’t fully understand this error, because on the surface, it’s just WRONG!
My username and password are correct, but it appears something somewhere is interfering or hijacking the authentication process. Three of the computers (laptops) are brand new, just purchased last week and setup this week. The HostPC is also fairly new,
just purchased last month.
I am not using a HomeGroup, and have removed all computers that were part of a HomeGroup. I have enabled file sharing and network discovery and enabled “Use user accounts and passwords to connect to other computers” on all PCs.
I have DSL and am using the wireless modem provided by my ISP which has router functionality built into it. It is a Sagemcom Model: F@ST 1704N.
All computers are connected wirelessly. Time is correct on all PCs. I cannot use Group Policy, since they're all Standard or Home edition. DHCP is enabled and all computers are on the same subnet, using the 192.168.254.x range of ip addresses.
The six computers are as follows: (I figured this may make is easier to visualize the layout)
HostPC: HP Desktop W8.1
PC Name: DrsBlend
U/N: DrsBlend p/w: 123456 (not showing my real password)
PC1: HP Laptop W8.1
PC Name: DrsBlend-1
U/N: DrsBlend P/W: 123456
PC2: HP Laptop W8.1
PC Name: DrsBlend-2
U/N: DrsBlend P/W: 123456
PC3: HP Laptop W8.1
PC Name: DrsBlend-3
U/N: DrsBlend P/W: 123456
PC4: HP Desktop W7 SP1
PC Name: DrsBlend-4
U/N: DrsBlend P/W: 123456
PC5: Dell Laptop XP SP3
PC Name: DrsBlend-5
U/N: DrsBlend P/W: 123456
Every PC stated above has the same user name and password and is logged-in with the username, DrsBlend and the password 123456. The "Logon failure: unknown user name or bad password” happens when trying to access HostPC, PC1, or PC2 from PC3, PC4, or
PC5.
The HostPC can see and connect to all the PCs, but only PC1 and PC2 can talk back or access the HostPC.
It’s like the HostPC and PC1, and PC2 are in their own little clique, and can talk back and forth to each other. Those three PCs can also talk to PC3, PC4, and PC5 as well, but PC3, PC4, and PC5 cannot talk back to them (HostPC, PC1, PC2).
Profile corruption? I would have entertained that thought, but the fact the first three PCs can access and talk to one another kind of defeats that idea, and the fact the PCs were just recently setup.
Firewall? Disabled, and disabled TrendMicro with no change. With them on/off, the first three PCs can still talk to each other and the rest of the PCs.
Anyone have any additional suggestions?Hi，
How did you connect to other PCs? Do you use RDP to connect to other PCs? If so, check the version of the RDP, as I know, some low version RDP can't connect to higher Windows like 8.1.
And could you please tell us the detailed information about how the six PCs connect to the home network?
Can PC1, PC2, PC3 ping back to host PC, PC1 and PC2?
You can also run command " rundll32.exe keymgr.dll, KRShowKeyMgr " view the credentials stored in your PC,check whether this issue is related with some old credentials stored in your system.
Yolanda Zhu
TechNet Community Support -
Logon failure; the user has not been granted the requested logon type at this computer (IE App)
Hello,
Question of a newbie:
In Windows Server 2012 I'm using IE10 to simulate numerous different users. But for some of these "fake" users I got the error:
Logon failure; the user has not been granted the requested logon type at this computer.
So I opened PowerShell : GPEDIT.MSC
Computer Configuration / Windows Settings / Security Settings / Local Policies / User Rights Assignment.
In the detail zone : Double-Clic sur Allow log on locally.
Dialog box : Allow log on locally properties
But the Add User or Group
button is grayed out!
What can I do?
Thanks for your help!Several months after...
I found the solution : the user has to be member of the Server
Operators in Active Directory.
That's all :)
Thanks -
Event ID 4625 Logon Failure event
I have a Windows 2012R2 file server that was upgraded from Server 2012. Initially the file server was working and users were able to access their home directories on the single shared folder. A few days ago the server stopped allowing access to the shared
folder and began giving the following event in the security log. I double-checked the local security policies "Allow logon locally" had everyone and "Deny logon locally" had no users or groups. I can login to the server as one of the user
accounts and access that user's homedirectory by mapping to the share\%username%, however, when I try to map from another computer I get the following error: logon failure the user has been granted the requested logon type I disjoined the server from the domain
then rejoined it. I also moved the computer account to the Computers container in AD and rebooted the server (just in case someone had set a group policy). I stopped sharing the shared folder then reshared it with the correct group permissions, which has full
control for share rights and modify for ntfs acls. I've tried adding a test user to the share group with full control then modify ntfs acls. I tried to run sysprep on the server, but it fails with an error that it can't be ran on a machine that has been upgraded
from a previous version of Windows. I ran cacls on the ntfs folders and the permissions are set correctly. Same is true when viewed from the gui. I am out of ideas. Can anyone please assist? ---------------------------------------------------------------------------------
Event ID 4625 on server: An account failed to log on. Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: xxxxxxxx Account Domain: xxxxxxxx Failure
Information: Failure Reason: The user has not been granted the requested logon type at this machine. Status: 0xC000015B Sub Status: 0x0 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: xxxxxxxx Source
Network Address: xxxxxxxx Source Port: 50146 Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 This event is generated when a logon request fails. It is
generated on the computer where access was attempted. The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network). The Process Information fields indicate which account and process on the system requested the logon. The Network Information fields
indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases. The authentication information fields provide detailed information about this specific logon request. - Transited services indicate
which intermediate services have participated in this logon request. - Package name indicates which sub-protocol was used among the NTLM protocols. - Key length indicates the length of the generated session key. This will be 0 if no session key was requested.Problem solved. Local security policy "access this computer from the network" lacked the user's group. Added and now it works remotely from workstations.
-
Certificate enrollment web servce GPO enablement failure
2012 Std R2
Added certificate authority role with web services
configuring via library hh831625
I have verified that IIS has the default site ADPolicyProvider_CEP_Kerbos and I copied the URI <a href="https:///ADPolicyProvider_CEP_Kerbos/service.svc/CEP">https://<server>/ADPolicyProvider_CEP_Kerbos/service.svc/CEP
I added a domain GPO per directions Certificate Enrollment Policy Web Services. I am editing the GPO for Computer->Policies->Windows Settings-> Security Settings->Public Key Policies. I double click Certificate Services Client - Certificate
Enrollment Policy. I enable the policy and ADD certificate enrollment policy list. I paste the above URI, Authentication type is "Windows Integrated". When I validate server I get the following error:
An error occurred while obtaining certificate enrollment policy
URI:https://<server>/ADPolicyProvider_CEP_Kerbos/services.svc/CEP
Error: The remote endpoint does not exist or could not be located. 0x803d00d (-21434855939 WS_E_ENDPOINT_NOT_FOUND)
Help with this final validation is appreciated. Logged on as administrator with domain admin rights and enterprise Admins rights
John LenzHi,
Please try to do the following steps at first. Thanks.
Configuring the CEP web address in the client
Before I go into the steps it is important to understand that this configuration is based on the security context. You have a CEP configuration for the user, and you have another configuration for the computer. Depending on what certificates you plan on
issuing (user or computer certificates) you may only require one of these to be configured.
Configuring user certificate enrollment
Run CertMgr.msc.
Expand Certificates, then Current User.
Expand Personal.
Right click on Personal, and select All Tasks, then
Advanced Operations, then Manage Enrollment Policies…
On the Manage Enrollment Policies dialog click the Add… button. See Figure 12
Type in the URI for the CEP service in the field. This will be in the format of:
https://<Internet FQDN>/ADPolicyProvider_CEP_UsernamePassword/service.svc/CEP
In my example this would be:
https://cert-enroll.fabrikam.com/ADPolicyProvider_CEP_UsernamePassword/service.svc/CEP
NOTE: the only thing that will be unique to your environment is the Internet FQDN of the URI.
In the Authentication type drop down select: Username/password
Click the Validate button.
Once the Validate button is pressed, you will be prompted to type in a domain user name and password. Supply these credentials.
If everything goes correctly you should see that the validation test passed in the lower section of the dialog box see Figure 13.
NOTE: You can see in Figure 13 that the only difference is the DNS portion of this URI. If you scroll down further in the validation output, you will see the friendly name you added under the website configuration being displayed also.
Click the Add button.
Uncheck Enable for automatic enrollment and renewal.
NOTE: Failure to do so could cause users to be prompted for user name and password each time they logon to the computer. This occurs because Windows Autoenrollment runs immediately after the user has logged on. If the enrollment policy is configured for automatic
enrollment and renewal, Windows Autoenrollment will attempt to contact the configured CEP server when it starts in order to determine if new certificates have been assigned. Since this will result in the users being prompted for credentials every time they
log on your users may be annoyed.
Click the OK button.NOTE: Follow the same procedures to configure the Enrollment Policy server for the computer personal store if you need to enroll for computer certificates.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support -
Logon failure due to an internal error-webi client tool
Hi experts,
I've installed WebI client tool 4.0, when I trying to logon this message appear: Logon failure due to an internal error,
this problem has been addressed before, but could not be resolved [http://forums.sdn.sap.com/thread.jspa?messageID=10751144#10751144|http://forums.sdn.sap.com/thread.jspa?messageID=10751144#10751144]
there is a way to solve this problem?
regards,
Jonathan.In a Unix environment the version is in the file “AddorRemoveProduct.sh” located in the installation folder of BI4.x
For the updated reference table of the versions / builds and corresponding patch levels, please see KB article # 1602088
BI 4.0 RTM
14.0.0.760
Patch 04
14.0.0.904
Patch 05
14.0.0.918
Patch 06
14.0.0.940
Patch 07
14.0.0.954
Patch 08
14.0.0.970
Patch 09
14.0.0.986
Patch 10
14.0.0.996
Support Pack 1
14.0.1.287
Patch 1.1
14.0.1.313
Patch 1.2
14.0.1.330
Patch 1.3
14.0.1.342
Patch 1.4
14.0.1.360
Patch 1.5
14.0.1.375
Patch 1.6
14.0.1.397
Support Pack 2
14.0.2.364
Patch 2.1
14.0.2.388
Patch 2.2
14.0.2.397
Patch 2.3
14.0.2.416
Patch 2.4
14.0.2.439
Patch 2.5
14.0.2.455
Patch 2.6
14.0.2.481
Patch 2.7
14.0.2.508
Patch 2.8
14.0.2.532
Patch 2.9
14.0.2.556
Patch 2.10
14.0.2.565
Patch 2.11
14.0.2.594
Patch 2.12
14.0.2.619
Patch 2.13
14.0.2.641
Patch 2.14
14.0.2.657
Patch 2.15
14.0.2.682
Patch 2.16
14.0.2.703
Feature Pack 3
14.0.3.613
Patch 3.1
14.0.3.630
Patch 3.2
14.0.3.657
Patch 3.3
14.0.3.678
Patch 3.4
14.0.3.691
Please note that at today FP03 is in RampUp
Maybe you are looking for
-
Search bar in contacts is a mystery
I cannot figure out how the search bar is set up for contacts. Sometimes it will jump up there so you can search and others it will just at the last location- Why did apple NOT make it so it is always visible no matter where you are within your conta
-
Hi, I'm trying to build the dax query to determine the distinct count for a column returned by the application of a Filter function. evaluate( row("counter", countrows( filter(order_summary, year(order_summary[change_date]) = 2013) ) I need to count
-
HT201209 Hi, i bought an i Tune card in Tokyo but i can't redeem it in nigeria
I bought an iTunes card in Tokyo but couldn't use it in Nigeria, was asked to use it on Japanese platform, what should i do
-
I need access to the raw completed form as submitted out by our employees on a work task.
I need access to the raw completed form as submitted out by our employees on a work task.
-
If I put a new internal hard drive in my Mac Pro, can I still get my Snow Leopard OS updated to 10.6.8? I have my original OSX disc, but it's 10.6.3.