UBR7200 ip address command missing

I have a ubr7200 with MC28U and NPE-G1 running:
Cisco IOS Software, 7200 Software (UBR7200-JK9SU2-M), Version 12.2(33)SCD7, RELEASE SOFTWARE (fc2)
ubr7200-jk9su2-mz.122-33.SCD7.bin
I cannot assign an IP to the cable x/x interface. IP address is not an available command.
No issues with addressing / routing on non cable interfaces.
router(config)#int cable X/X
router(config-if)#ip ?
Interface IP configuration subcommands:
  dhcp                Configure DHCP parameters for this interface
  header-compression  IPHC options
  rsvp                RSVP Interface Commands
  rtp                 RTP parameters
  subscriber          IP session configuration options
  vrf                 VPN Routing/Forwarding parameters on the interface
router(config-if)#ip
Is this an IOS limitation on this version or am I missing something? Any comments/direction is appreciated,
Thanks,

A genius colleague found the resolution...
We had this issue too and he found that the firewall was set to multiple mode.
To resolve, do a "Mode single" to change back to single mode and reload.
It would go back to the normal firewall config.
HTH

Similar Messages

  • Error OTF end command // missing in OTF dat

    Hi
    I am converting a smartform of a PO into a PDF. when i am using the option of pint immediately in message option of PO. I am getting this error OTF end command // missing in OTF dat . when i am using option 3 which in not print immediately. i am able to convert it into pdf file and save in my local folder. please advice.

    when you click the message button while creating a PO. it will take to next page where you add your output type that is output, partner etc.. after you add and click on further data button there you will have option for dispatching here when you add slect option 4 whihc is print immediately. then i am getting the error. if i am using the other options i am able to down load into pdf but not able to see print preview. please advice

  • ERROR MESSAGE WHEN USING PACK COMMAND   Missing file ////presenter.css   Also:  "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course."  I have Java enabled in all browsers

    ERROR MESSAGE WHEN USING PACK COMMAND   Missing file ////presenter.css    Command then fails
    Also:  "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course."  I have Java enabled in all browsers
    Thoughts?  Using Presenter 10  Win 8.1  Intel I7  new HP with plenty of memory
                   Thanks

    I had saved one copy as an .asp but then resaved it to .xhtml 
    I'm assuming this is a static web site.  Rename (F2) all your pages with .html or .htm extension. 
    .xhtml is not a valid extension.
    Nancy O.

  • Photoshop and Illustrator batch commands missing in Bridge CS6

    Photoshop and Illustrator commands missing (eg batch and Live Trace) in Bridge CS6 tools, but they are there in CS5.
    Any thoughts
    much appreciated regards
    Tim

    So I deleted/uninstalled all versions of bridge then photoshop, but Bridge would not even install with PS cs5 (maybe it never did, there was no option on install).
    In the CS4 suite there was a separate option to install or uninstall Bridge, for CS5 they changed this as combined install with PS.
    There are many options for buying separate applications or combinations (Suite) of Adobe Products but according to the Adobe Site Bridge is delivered also with the separate applications Indesign, Illustrator, Flash, Premiere Pro, After Effects and Incopy.
    Usually when having a complete Suite it is delivered with one of those applications.
    Bridge should be able to communicate with all applications from the same CS version, but uses start up scripts for that applications.
    When doing normal installation those scripts should be placed in the correct location automatically.
    Having different suite versions on your system it will not be easy to make them communicate with each other through one version of Bridge (sadly enough you can also have only one version of Bridge active at the time and different versions of Bridge use different cache folders).
    Don't have experience with scripting but maybe the dedicated Bridge scripting forum (link in previous post) can help you out for the answer of customized start up scripts or if it is possible at all.

  • OTF end command // missing in OTF data when using CONVERT_OTF_2_PDF

    Hi
    When using the function module CONVERT_OTF_2_PDF I am getting the strange scenario that for some users it is giving the error message "<u><b>TD 030: OTF end command // missing in OTF data</b></u>". 
    I am executing this function module using the OTF output data received from a smartform executed with the parameter control-parameters-getotf = X and I am not formatting it in any way.
    any assistance in this is much appreciated.

    hi
    good
    go through this link,which ll give you detail idea about this function module
    http://www.jt77.com/development2/programming-07636.html
    thanks
    mrutyun^

  • Address Command in smartform

    Hi all,
    i am using address command in smartform .there is a radio button for po box and street ..i have to select both po box and street ..is there any way to get the same.
    also i need to print some hard code text in front of address how can i do it.
    i want output as
    B  Name
    I    Street
    L   po box
    L

    Hello,
    The radio buttons are specified to just give the priority to print; i.e.,  whether to print the street as the priority or the PO as the priority.
    Now you can decide what to print first by selecting the radio button.
    If you are selecting radio button for street then, first Street prints and then the PO, if you are selecting the PO radio button, then PO prints then followed by street.
    Hence no worries, now your second requirement to print the text before the address, just add an text element before the address format.
    PS: please do make a note that you cannot insert your texts in the middle of the address that is being printing by using address tab.

  • "Edit In Photoshop" command missing

    I bought Lightroom and Photoshop Elements 10 last year (downloaded LR v4.3 yesterday) and sat down to learn how to use them together today (www.lynda.com Using Lightroom and Photoshop Together with Jan Kabili).
    When I open LR the Photo -> Edit In -> Edit In Photoshop command is greyed out (non-functional).
    I tried both solutions listed under 'Solution 3: On Mac OS' on the following help page including uninstalling and re-downloading and installing PS Elements 10 and it is still not working:
    http://helpx.adobe.com/x-productkb/multi/edit-photoshop-command-missing-photoshop.html
    Please advise how to make your programs work together.  Surely, with Photoshop Elements installed and running on my computer Lightroom must be able to notice it.
    Bill.

    I just realised what I was doing wrong.  I installed Photoshop Elements 10 but I was launching Photoshop Elements Editor not Photoshop Elements.  I had no idea there were multiple applications!  Now that I have launched the main Photoshop Elements Application (it then brings up a dialog where you select organize or edit) the "Edit in Photoshop Elements 10" menu item has appeared as expected in Lightroom.

  • Does the 10.5.7 update address command+f finder search issues?

    Does the 10.5.7 update address command+f finder search issues?
    Search has been horrible under 10.5 in that it does not reliably find FOLDERS on network drives, only file names.
    Even when I am looking directly at a folder and I search for it will not appear in the command+f window.
    Also the stupidity of not allowing a specific search location.
    Has this been addressed? I have, at any given time, 3-4 mounted servers.
    I do not have a choice now to search a specific hard drive.
    10.4.11 gave me the option under "OTHERS" to select a specific place to search.
    The only choice I have in 10.5.2 is "SHARED". Which searches all drives when I only want to search one. Nor do I have a choice of searching just one of my two internal drives.
    I talked with Chris in apple engineering several months ago, who acknowledged that search problems are a known issue under 10.5 and this was being addressed but have not heard any more. I don't want to download an update unless these broken search issues have been fixed. This is a production machine and I cannot have downtime in the Dept.

    Have you filed a bug report or enhancement request with Apple?
    http://bugreport.apple.com/

  • After buying items in eBay, noticed that somehow my shipping address is missing the unit number.

    After buying a few items in eBay noticed that my shipping address is missing my unit number.I assumed my registration address will be copied to "shipping address" properly but it did not. How can I get a hold of the shipping company to make informed them of the unit number?

    Is the GSP involved?  At any rate FIRST correct your Paypal address. Then contact the seller and if he has not yet shipped, he can correct the address manually.If he has shipped, hmmm.Apartment building? Put a big Note on your box for the postie that you are expecting a parcel and this is where the delivery notice should go.If the supervisor or concierge normally collects tenants parcels, there shouldn't be a problem, but let her know that you are expecting this one in particular.Commercial or Industrial building? Is the company name on the parcel? Does Reception usually accept parcels? Talk to her about it. You should also talk to the Post OFFICE (not outlet) where your postie sorts his bag. A message there would also be helpful. The bottom line is communication.If the parcel is undeliverable, it will eventually be returned to your seller. 

  • Using Address..End Address Command in Script ?

    Using Address........End Address Command in Script , Is it possible to print without Name filed ? I have tried but w/o name field it is not printing   ..
    I liket to print like this
    Address paragraph Z3
    Street ...........................
    PoBox.........................
    City........................
    End Address
    can any1 suggest me?

    Hi,
    If you want to print country specific then use
    /:           ADDRESS PARAGRAPH AS
    /:             ADDRESSNUMBER &EKKO-ADRNR(K)&
    /:             FROMCOUNTRY &T001-LAND1&
    /:           ENDADDRESS
    Reward if useful.
    Regards,
    Nageswar

  • OTF end command// missing OTF data

    Hi all,
    I created one PO smartform and assigned it to a driver program its execting fine in one development client.
    When I try to execute the same smartform in another development client its showing  "OTF end command// missing  OTF data".
    In the driver program there's FM " CONVERT_OTF_2_PDF".But still its showing the error when I run the tcode me9f to send the form through mail and even when checking the print preview.
    what could be the reason? Do I have to make any changes in  the FM CONVERT_OTF_2_PDF in the another dev client?
    Please answer
    Thx

    Every OTF data has "//" in begining and "EP //" in the end. Are you modifying the OTF internal table before passing it to the FM for PDF conversion? Check the content of OTF in debugging mode.

  • While converting smartform output toPDF: end command // missing in OTF data

    Hi,
    While Converting smartform output to PDF i am getiing the following error.
    end command // missing OTF data . And also in the importing parameter of smartform  function module also (job_output_info ) i did not findout the data. Where did i make a mistake. How can i correct this error. Thanks in advance.

    Implemented SAP Note 1123505 - OTF-PDF conversion.

  • Archive Smartform Copies - Error - OTF end command // missing in OTF data

    Hi All,
    We are printng invoices and archiving them at the same time.
    When I try to print and archive just the original invoice it works fine
    That is , it prints and archives.
    However when I set the flag SSFCOMPOP-TDARCCOP to 'X'  (Archive Copies as well),
    I get the error OTF end command // missing in OTF data.
    Im guessing that the system tries to archive multiple copies and the End of File Command // at the end of each copy is causing the issue. But I dont know how to go about solving it.
    Regards,
    Nehal.

    Implemented SAP Note 1123505 - OTF-PDF conversion. Archiving several copies

  • 550 Sender address is missing a domain

    I am getting this error while sending message through java mail.
    com.sun.mail.smtp.SMTPSendFailedException: 550 Sender address is missing a domain
    I searched the net, Javamail FAQ and forum. Dint find any solution.
    I would appreciate a lot if any one tell me what the problem is
    Thanks in advance

    Below is the full trace
    DEBUG: setDebug: JavaMail version 1.4ea
    DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]
    DEBUG SMTP: useEhlo true, useAuth false
    DEBUG SMTP: trying to connect to host "smtp1.ns.sympatico.ca", port 25, isSSL false
    220 simmts12-srv.bellnexxia.net ESMTP server (InterMail vM.5.01.06.13 201-253-122-130-113-20050324) ready Fri, 19 Jan 2007 00:56:28 -0500
    DEBUG SMTP: connected to host "smtp1.ns.sympatico.ca", port: 25
    EHLO kkmadala
    250-simmts12-srv.bellnexxia.net
    250-HELP
    250-PIPELINING
    250-DSN
    250-8BITMIME
    250 SIZE 20971520
    DEBUG SMTP: Found extension "HELP", arg ""
    DEBUG SMTP: Found extension "PIPELINING", arg ""
    DEBUG SMTP: Found extension "DSN", arg ""
    DEBUG SMTP: Found extension "8BITMIME", arg ""
    DEBUG SMTP: Found extension "SIZE", arg "20971520"
    DEBUG SMTP: use8bit false
    MAIL FROM:<smtp1.ns.sympatico.ca>
    550 Sender address is missing a domain
    com.sun.mail.smtp.SMTPSendFailedException: 550 Sender address is missing a domain
         at com.sun.mail.smtp.SMTPTransport.issueSendCommand(SMTPTransport.java:1388)
         at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:959)
         at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:583)
         at javax.mail.Transport.send0(Transport.java:169)
         at javax.mail.Transport.send(Transport.java:98)
         at MailDrop.SendMail.<init>(SendMail.java:32)
         at MailDrop.SendMail.main(SendMail.java:39)
    QUIT
    221 simmts12-srv.bellnexxia.net ESMTP server closing connection
    com.sun.mail.smtp.SMTPSendFailedException: 550 Sender address is missing a domain
         at com.sun.mail.smtp.SMTPTransport.issueSendCommand(SMTPTransport.java:1388)
         at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:959)
         at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:583)
         at javax.mail.Transport.send0(Transport.java:169)
         at javax.mail.Transport.send(Transport.java:98)
         at MailDrop.SendMail.<init>(SendMail.java:32)
         at MailDrop.SendMail.main(SendMail.java:39)

  • 550 Sender address is missing a domain. wrong section sorry IGNORE

    I am getting this error while sending message through java mail.
    com.sun.mail.smtp.SMTPSendFailedException: 550 Sender address is missing a domain
    I searched the net, Javamail FAQ and forum. Dint find any solution.
    I would appreciate a lot if any one tell me what the problem is
    Thanks in advance
    Message was edited by:
    m_kk

    Sender address is missing a domainThe error message seems rather explicit. How does that address look like?

Maybe you are looking for