UC320 dial plan problem for New Zealand

Hi all,
Our UC320 will no longer make outbound calls to local/national New Zealand numbers. International is fine. The problem is that if I dial:
09 375 5967, it gets normalized to +64093755967 (notice the 0 after the 64) and the call fails.
If I dial 0064 9 375 5967 it gets normalized to +6493755967 which is correct and the call works. My users simply won't accept having to dial the additional 0064 for local numbers.
Any idea how to fix this?
Cheers.

Hi,
the problem as you know already is cause by your secondary extension numbers, that are perfectly overlapping with some external numbers. What is the reason for these secondary extensions ?

Similar Messages

Bank Account number format for new zealand country

Hi Expert,
Could you please help me out with the bank rules for New Zealand bank. I want to know how the Bank key, Bank Account number format will be.
And also, what would i need to ask for vendor if i try to update the bank details in SAP.

Hello, Shiva!
You can check these links for New Zealand bank number formats:
New Zealand bank account prefix - Wikipedia, the free encyclopedia
http://www.enz.org/forum/showthread.php?t=7756
http://www.newzealandbankcodes.com/
Hope, this will help you!
Best ragards,
The Wirtschaftsmann!

Need UC320 Region Pack or dial plan modification for Egypt

We have bought a UC320W device from a Cisco local distributer in Egypt, but we are facing a problem with the configuration as the device doesn't have a Region Pack for Egypt so we used some other country's Region Pack, the problem with this configuration is that it only supports dialing external land line as it doesn't support dialing mobile phone or International numbers, is there a Region Pack for Egypt? Or a way to modify a dial plan?
Thanks.

Hi Friedrich,
To answer your question about the authorized local Cisco Distributor, we have bought the UC320W from Metra Computer, I've configured everything correctly using the Brasil Region Pack except for the time-zone, each time I change the time on the phone-set (SPA504G) it reverts after a little while to the time set by the UC320W because it's being provisioned by it, I have found the ChangeNTPserver.pmf among my exploration, so I guess it's possible to provide a .pmf file that can add the GMT+2 time-zone to the Brasil Region Pack or disable the time-zone provisioning, can you help me with that? How can I request such support task adequately?
Thanks and regards.

Google search checkbox for New Zealand has gone missing off later Firefoxes, we are losing sales due to this.

Earlier versions of Firefox had option boxes under the Search bar. The options were: Either a global search, or Search New Zealand (in my case).
This has gone, and businesses like mine in NZ are losing customers.
Is there some way that people can be reminded to search for products in their own countries before searching globally?
Thanks

Hi Frederic
Thanks for your response
I am not sure what is meant by regenerating the field group in this case
I added the entries for my view in the field group and generated the layout of the field group (If this is what you mean)
The field is working fine. I am able to save values to the field and able to see values saved in GUI.
I haven't linked search help of the field in PCUI
I am not sure how to go about it.
I used the data element in the structure for the field.
The data element has Domain entry in <b>Entry Help/Check</b> of the structure
If i check the Domain Value checkbox in my field group then the domain values should be available in dropdown if the field is dropdown
However i am not able to see the possible values of the field (It is present in SAP GUI)
Does something else needs to be done in this case
TIA
Asad

When I set up my ipad I mistakenly ticked that I am in Australia. I did not realise this until I tried to input my credit card info and it wanted my Australian State. I redid everything for New Zealand, but it still wants an Aussie State! What do I do?

How do I get the ipad to ask for my New Zealand province after I went back and changed my location to New Zealand. Until I get that right I won't be able to use the istore.

You set your country according to your credit card billing address.
You can edit your info here:
Settings>Store>Apple ID

Normalisation / Dial Plan rule for +44 (0) 7777 123 456 / +44 (0)131 123 4567

Hi was looking for a bit of assistance with a normalisation / dial plan rule I am struggling with, i'm trying to translate numbers of the the following pattern:
+44 (0) 7777 123 456 / +44 (0)131 123 4567
I've created the following rule, which appears to normalize the number in the correct e.164 format within the rule itself, but when stepping outside of the rule and testing it from the Dial Plan or from the Lync client it doesn't seem to be working.
I have the following in place, any suggestions greatly appreciated!
Pattern to Match:
^\+44\s*$0$\s*(\d+)\s*(\d+)\s*(\d+)$
Translation Rule
+44$1$2$3

First of all, don't worry about accounting for brackets, dashes and that sort of thing. Lync automatically parses those things out prior to normalization. Secondly, Lync will not normalize any number that has a plus in front. The MS thinking on this
(and for the record, I don't agree with it) is that any number that has a plus in front is already normalized to E.164 and it will not process any normalization rules.
If you want to normalize numbers without the +, this should work out nicely for you:
Pattern to match: ^(?:44)?0?(\d+)$
Translation Rule: +44$1
This will translate any combination of 44 (0) 7777 123 456, (0)
7777 123 456 or 7777 123 456.
You'll notice that the Dial plan test will fail if you put spaces and stuff in the number to test, but
if you do it from the Lync client, it will work just fine (but without the +)
Ken Lasko | Lync MVP | UCKen.blogspot.com |
LyncOptimizer.com

IBooks store for New Zealand Big disappointment

The only thing I am not happy with regarding my iPad is the iBook store. I'm assuming it's just the New Zealand one, but there are only free books. No best sellers like I was expecting. Is a huge let down as it was a big reason I bought it. Anyone know why this is?

Mstenton wrote:
The only thing I am not happy with regarding my iPad is the iBook store. I'm assuming it's just the New Zealand one, but there are only free books. No best sellers like I was expecting. Is a huge let down as it was a big reason I bought it. Anyone know why this is?
Licensing rights are really difficult to negotiate. Unfortunately, there isn't a unified world licensing system, it has to be done country by country. I don't know if you were around, but I think the NZ version of the iTunes store followed the US version by 5 years, give or take. Even here in the US, there are lots of publishers missing.
If I were you, I'd download the Kindle App, and browse Amazon's selections. They have a much larger selection and more publishers. And, in many cases, lower prices. They have a 3 year head start on licensing. Of course, Kindle in NZ won't be available until late August, so you may not have access to the app.
Anyways, this is a bummer for a lot of countries. This will change over time as agreements are signed, one by one.

GLPLADM Planning profile for new gl - default parameters

i have copied the existing SAPFAGL profile and the layouts belonging to them and created a new profile with the same layouts. i am trying to set default parameters in order to get file description for each of the planning layout. i am able to do in our sandbox but not in the development client. the difference between two clients are sandbox is an upgraded version to 6.0 and the development client is a new box loaded with ECC 6.0. kindly help me on this.i would need to have the file description in order to do a excel planning upload. my excel planning upload works fine for the cost center profile and the layouts. i am having issue with the new g/l planning where the planning is done at the profit center and g/l Account

no errors no issues.. usually when we click on the default parameters it takes us to the screen showing the layout and then we key in data and the excel sheet gets loaded . we key in data or we can save the file description , it is automatically generated and the file description generated by the system gets populated in the file description field of the planning layout in the planning profile. in my case, when i click the default parameters, it doesnt go any further, and no warning or erro messages are issued. the same default parameters take me to the layout screen when i click the default parameters from the Cost center planning profile. i am not able to resolve this, asked many people but of no use. hope you understand my issue.

Hi to all (Problems for new to Oracle)

Hi everybody,
Thanks in advance.
Actually I know SQL Server/MySQL.
I am new to Oracle.
I want to enter in this field.
Do I expect more problems regarding SQL/PLSQL???????

For a good overview of PL/SQL, which you don't really have an equivalent of in MySQL or SQLServer you might want to have a look at Mastering Oracle PL/SQL by Connor McDonald. It's clear and reasonably straightforward.
Also, if you're looking to learn, download Oracle XE, it's a first class training database and totally free, available for Windows and Linux. It's missing a few things, like a JVM, but mot of the power of 10g is there. You can get it via otn.oracle.com/xe. It's still in beta (very stable), the production release shoul be out by the end of the month.
Tom Kyte, as the previous poster suggested, is widely regarded as the one of, if not the leading Oracle Technology guru, and all his books are excellent, but they are also daunting if you're just starting into Oracle (in fact, they're still daunting). Have a look at asktom.oracle.com, and if you feel comfortable with the solution discussions, then get the credit card out and start buying, you'll never get a better understanding of the database.
Don't forget about the Oracle library itself
http://www.oracle.com/technology/documentation/database10gr2.html
All Oracle documentation is published here, free. Good luck!

.Mac Alias - Small Niggling Problem for New Apple User

Hi,
I have very recently purchased my very first Apple computer - and yes, i am one of those life long MS-DOS/Windows users who have been lured by the ease and simplicity of the iPod (which apparently a lot of people are loath to admit, but hey, I'm not proud).
Anyhow, having got my nice new shiny system out of its box, and up and running, I set-up up a new .MAC account, and then set-up one alias, the thing is my 'alias' mail is not ending up in my .Mac mailbox, but my other mailbox which belongs to my broadband ISP.
Basically in Apple Mail ( I have OS X Tiger.10.4.3) I have an 'InBox' which shows everything from my two accounts, and separate mailboxes within : One called 'BlueYonder' who is my broadband ISP, and a second mailbox called '.Mac Mail'. IYSWIM?
Now ALL of the mail sent to my standard .Mac account address ends up in the .Mac mailbox, and the 'collective' InBox, but and here is the puzzle, any mail sent to my .Mac ''alias'' goes into the 'Collective' InBox and my 'BlueYonder' mailbox, but not into my .Mac mailbox!
I sent an email to the .Mac support team, and they said that it was either an issue with Apple Mailbox, and that I should look in here at the 'Discussions' or I have a Rule set-up.
Well I don't have a rule set-up except the one that was already set-up when I first bought my system. This is set to just highlight in Blue any mail from any 'Apple' address. No rules are set to move or change locations etc.
So can anyone,if possible please advise me what is going on with my mailbox and also how I can rectify it if possible please?
Thanks and all the best for the New year to you all.

Drusus - would be good for you to share your findings here. It might help anyone else with the same problem in the future.
Thanks,
Brocks.

Installation problems for new account.

Hi,
Im making this post so that i can link it for a moderator for use as guidance to my current installation woes. If anyone wishes to add anything please feel free but remember that this post is for the "mods"
I will be contacting and linking to this using: https://bt.custhelp.com/app/contact_email/c/4951
I placed my order on the 9th of April 2012 for unlimited evening and weekend calls and BT Infinity option 2.
I received all of the relevent emails confirming my order and the dates for installation were given as:
Phone line engineer: 19 April 2012 between 8am and 1pm
Phone line starts 19 April
Broadband engineer: 19 April between 81m and 1pm
Broadband starts 19 April
On the 18th April i get a text message saying that the Infinity engineer is delayed to the 25th April between 8am and 1pm.
19th of April the phone engineer comes and re-does all the wiring inside the property as needed and realised that the wire from the street pole is missing. He gets that all sorted and then proceeds to the exchange. Returns saying he cannot complete the phone line as a "cable" is missing and leaves.
On the 25th of April the broadband engineer comes and sets up the infinity. He notifys me that only one of the two cables required from the exchange is available but gets Infinity working at 40mb down and 6mb up. He tells me to contact BT by phone (laugh what phone?) to re-book the phone line engineer appointment.
I contact BT on the phone and get through to the Indian call center. He places me on hold while he contacts BT open reach and notifies me that he has "raised" the problem and that an engineer is booked for the 3rd of May.
The next day (26th April) i re-call BT to confirm the appoinment. Just as well i did as the pleasant UK lady told me that no appointment is on the system?! She contacts BT open reach again and tells me that someone should contact me within 24 hours and if i do not hear anything to call back (she gave me a direct number)
Today the 27th of April I receive no phone call back, so once again i call back on the number provided. This time back to the Indian call center (sigh). Once again the guy places me on hold while he speaks to open reach. He proceeds to tell me that the next available slot for the phone line engineer is the 10th of MAY!
My new order summary when checked online is now!:
Broadband installed 25th April
Broadband activated 10th May
Phone line 10th of May
AND Order placed on:Fri 27 Apr 2012!!! huh?
What i want to know is: Can BT actually provide me with this phone line and number any time soon as i can once again see the phone line engineer coming to the property and unable to do anything (like the first) as it is a larger job than expected on the day of install.
I was on Virgin media for TV,Phone,BB and those services are due to expire on the 11th of May. I wanted to place an order with Sky for my TV but i needed the phone line to do this. When i placed my original order for the BT services I allowed ample time (over 3 weeks) between the swap over (19th of april to 11th of may) to place that order to sky. Now i am left with the prospect of having no TV come 11th of May (cant order Sky as no phone line) or phone line since the 19th of April!
Currently (touch wood) the Infinity is working upto 40mb. I am supposed to be on the upto 79mb speed but cant place the upgrade as you guessed it i dont have a phone number!
I just want the services installed as promised and for BT to KEEP their promises when it comes to appointments. So far i am not impressed. If this cannot be resolved soon i will have no option but to call Virgin back and get my old services resumed (which i do not want to do tbh)
As it stands an Engineer is booked for the 10th of May, but i am unhappy with this as i feel this order has been delayed to many times and perhaps this could be "raised"
If a "mod" can get in touch with me regarding this i would be very grateful.
Jay.

O now wait, i just recieved a text its been delayed and changed yet again to:
11th of May between 8am and 1pm!
Your activation date Thu 10th May
Your appointment Fri 11 May
Makes no sense whatsoever.
Come on BT, what the hell are you playing at.

Reg: Query Problem for New Posting Period

Hi Xperts,
While I try to Map the A/P Invoices with their respective Outgoing Payment,
I used the following Query and it's Query Printlayout
SELECT T0.DocNum [Payment#], T0.DocDate [Payment Date],
T0.CardCode, T0.CardName, T1.InvoiceId, T2.DocNum [AP Inv#],
T2.NumatCard [Bill No.], T2.DocDate [Bill Date], T1.selfInv,
T1.SumApplied, T1.WtAppld, T0.NoDocsum
FROM [dbo].[OVPM] T0 INNER JOIN
[dbo].[VPM2] T1 ON T1.[DocNum] = T0.DocNum
INNER JOIN [dbo].[OPCH] T2 ON T2.[DocEntry] = T1.DocEntry
WHERE T0.Cardname='[%0]' and T0.DocDate='[%1]' and
T0.DocNum='[%2]'
I got the above query from our Expert Mr.Sambath only.
Now what is the problem is the query is retrieving the payment details of old Posting Period only and not the current posting period.
In detail, I used 'Primary' Series for FY08-09, Period indicator 'Default'
Now I'm using 'Primary1' Series for FY09-10, Period indicator '0910'
Thanx in adv.
Regards,
Bala

Hi Bala,
Looking at your query, it is not query issue ,it is your data issue.
Please check if you have data in VPM2 table which is bank transfer payment method
Thank you
Bishal
Edited by: Bishal Adhikari on Apr 9, 2009 8:48 AM

Capture problems for new Final Cut user

I'm new to final cut, just switching from pc...got a brand new mac pro, fresh install of final cut studio. I am capturing hdv tapes from a Sony FX1 using capture now so that the clips are broken up. It captures perfectly except for the long clip, which is about 40 minutes long. I've gone back to capture it alone and get an unknown capture error after I hit escape to end the capture. There is plenty of room on the hard drive and the ckeckbox in system settings for limiting capture now to 30 minutes is not checked. Any ideas?

Are you capturing using HDV, ProRes, or SD via i.Link Conversion? I also have a Sony FX1, and capturing long clips is only an issue when my hard drives can't keep up or if there is an issue with the tape. Sometimes the tape can have issues and will disrupt your capture. Definitely set your capture scratch to an internal drive if you can and don't capture to your boot drive if possible. If you only have one drive, fork over the 100 bucks and get a 750 gig drive or even two or three and raid them together. You'll be happier if you do.

Problems for new license

I am following with the problem, the downloaded version minisap: SAP NetWeaver ABAP Trial Version 7.0.
It ate the link installed the license, without problems, after the 90 days was again seeking another license.
But the page on the choice of the field: System ID *.
You see only the options:
- LNX - SAP R / 3 4.6B;
- MBS - SAP R / 3 4.6D;
And what I saw in the permit I received by e-mail and not for MBS and NSP.
How can I get the correct version of the license?

I think they already have although publicity about this seemed to be scarce and I only found it by reference in another post.
https://www.sdn.sap.com/irj/sdn/downloads?rid=/webcontent/uuid/0028dd07-2c3c-2b10-3da0-9056be561551
(Mods -- Maybe this SAP Blog should be pinned as it answers - for now - the question of License updates not being available currently).
Cheers
jimbo

Sync Problems for new ipod user.

Problem syncing my ipod mini. I can get about maybe half a song on my ipod (it is there when I disconnect it from the pc to check) and the itunes errors out saying "Attempting to copy to the disk "ipod name" failed. The disk could not be read from or written to." If I keep hitting the sync button it will start over again and continue uploading songs to the ipod but sure enough after a few min I will get this same error again. I think I have gotten about 3 songs loaded at the most before getting this error. Thanks for any help in advance and I apologize for asking this question and it has been answered previously.

After searching many postings about this very issue I think I have identified the issue. The iPod Control folder is set to read only. I go in as admin and uncheck that, launch iTunes and sure enough I check the folder and it is set back to read only. Any idea here?

UC320 dial plan problem for New Zealand

Similar Messages

Maybe you are looking for