UCCHECK ASSIGN 019 error
Hi,
In UCCHECK, for below code, I am getting error "You cannot use ASSIGN f+offset. Always use an explicit length (or '*')."
DATA: BEGIN OF ITAB OCCURS 1,
FIELD(80),
END OF ITAB.
DATA : LV_INDEX LIKE SY-INDEX.
FIELD-SYMBOLS: <SCR>.
ASSIGN ITAB+LV_INDEX TO <SCR>.
Can somebody please explain the issue and how to fix it?
Thanks,
Yogita
Hi Yogita,
You need to specify the offset length explicitly in case of unicode system.
Check this code.
DATA: BEGIN OF ITAB OCCURS 1,
FIELD(80),
END OF ITAB.
DATA : LV_INDEX LIKE SY-INDEX.
FIELD-SYMBOLS: <SCR>.
<b>ASSIGN ITAB+LV_INDEX(80) TO <SCR>.</b>
Check this link for limitations of ASSIGN in unicode system
http://help.sap.com/saphelp_nw04/helpdata/en/79/c55470b3dc11d5993800508b6b8b11/content.htm
Thanks,
Vinay
Similar Messages
-
Dynamic Type Conflect when assigning References error in portal
Hi Forum,
We have one ABAP Dynpro Application which runs fine but gives "Dynamic Type conflict when assigning References" error dump after integrating it with Netweaver portal 7 SP12 by creating Webdynpro ABAP iview.
Please help us to resolve this issue.
Thanks and Regards
Sudhirhi
refer this article :
How to Create Web Dynpro-Based iViews
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3e36d690-0201-0010-cd99-bfbb81bd33d9
refer the SAP online help :
Create a Web Dynpro iView
http://help.sap.com/saphelp_nw04/helpdata/en/2c/00584289e59041e10000000a1550b0/content.htm
regards,
amit -
I CANNOT restore my iPhone, so now I'm stuck with a useless iPhone because I can't complete Restore - because Error 23 keeps coming up! Ugh...it bugs the heck out of me, that Apple assigns an error number without explaining (a) what that IS, (b) taking or redirecting to a SPECIFIC troubleshoot page for THAT error. I've wasted lots of time doing all the stuff already suggested but Error 23 persists! Please help or I've just lost my lovely old-design 3G, which I really am loathe to give up for one of those ugly new boxy too-long slim things... (Which cost $200, 2 boot!)
Thx BUT =as-said, I've tried ALL the suggestions - including reading through the link you just suggested/posted (but just for good measure, i've just re-read thru it again!). I noticed from this list the first time i read thru it, that Error 23 didn't appear anywhere on this list of various (numerous!) error numbers. So/ergo, i still don't know (a) what exactly this error IS, (b) how to fix/get past/resolve it.
I don't have an Apple store anywhere near me. Even if I did, I wonder whether they would (a) be willing to (b) able to fix it @ the so-called Genius bar? Any thoughts on this? (Obviously, if there were an Apple store nearby, I'd go there & try; as-is, it would entail an extra trip & an expense costing as much as buying a new iPhone!) -
AnyConnect client no assigned address error
I am trying to set up the AnyConnect client (v2.4.0196) and when it tries to connect it fails with a no assigned address error. I look in the logs of the ASA and see a No IPv6 address available for SVC connection. IPv6 is disabled on the ASA.
Does anyone know how to prevent the AnyConnect client from trying to get an IPv6 address?
Thanks in advance...Note that 2.4 is still beta, 2.3.2016 is the latest supported release today.
Having said that, I rather suspect an ASA issue than a client issue. Can you confirm whether or not an ipv4 address is assigned?
I.e. is there something in the logs like:
Oct 13 2009 09:05:55: %ASA-6-737026: IPAA: Client assigned 192.168.0.1 from local pool
Oct 13 2009 09:05:55: %ASA-6-737006: IPAA: Local pool request succeeded for tunnel-group 'DefaultWEBVPNGroup'
(note these are level 6 messages) -
Assigned MP errors when I deploy program
<select class="ratingSelect" disabled="disabled" id="starRating243703" style="display:none;"><option value="-2"></option><option value="-1"></option><option value="0"></option><option
value="1"></option><option value="2"></option></select>
0
i have 1 primary site and 4(site system server) and our company have more than 15000 users and more than 1000 branch
Boundaries are set to IP Address range for all branch
- Discovery is performed and successful
- Sites are assigned
when i deploy program it's get error in locationservices.log
([style="color: #993300;"] 2 assigned MP errors in the last 10 minutes[/style], threshold is 5. LocationServices 12/9/2014 11:13:00 AM 8836 (0x2284)Attempting to retrieve local MPs from the assigned MP LocationServices 12/9/2014
11:13:00 AM 8776 (0x2248)Unable to retrieve AD site membership LocationServices 12/9/2014 11:13:00 AM 8776 (0x2248)Refreshing the Management Point List for site PRI LocationServices 12/9/2014 11:13:00 AM 8776 (0x2248)Retrieved management point encryption info
from AD. LocationServices 12/9/2014 11:13:01 AM 8776 (0x2248)Raising event:instance of CCM_CcmHttp_Status{ ClientID = "GUID:56FBA3BF-91CF-4195-9914-4C1ED87608BE"; DateTime = "20141209081301.044000+000"; HostName = "SCCM.moj.gov.local";
HRESULT = "0x00000000"; ProcessID = 2780; StatusCode = 0; ThreadID = 8776;}; LocationServices 12/9/2014 11:13:01 AM 8776 (0x2248)Refreshing trusted key information LocationServices 12/9/2014 11:13:01 AM 8776 (0x2248)Raising event:instance of CCM_CcmHttp_Status{
ClientID = "GUID:56FBA3BF-91CF-4195-9914-4C1ED87608BE"; DateTime = "20141209081301.067000+000"; HostName = "SCCM.moj.gov.local"; HRESULT = "0x00000000"; ProcessID = 2780; StatusCode = 0; ThreadID = 8776;}; LocationServices
12/9/2014 11:13:01 AM 8776 (0x2248)Persisting the management point authentication information in WMI LocationServices 12/9/2014 11:13:01 AM 8776 (0x2248)Persisted Management Point Authentication Information locally LocationServices 12/9/2014 11:13:01 AM 8776
(0x2248)Unable to retrieve AD site membership LocationServices 12/9/2014 11:13:01 AM 8776 (0x2248)MPLIST requests are throttled for 00:04:38 LocationServices 12/9/2014 11:13:01 AM 8836 (0x2284)Unable to retrieve AD site membership LocationServices 12/9/2014
11:13:01 AM 8776 (0x2248)Updated FSP 'SCCM.moj.gov.local' from AD to local. LocationServices 12/9/2014 11:13:01 AM 8776 (0x2248)Updating portal information. LocationServices 12/9/2014 11:13:01 AM 8588 (0x218C)[style="color: #993300;"]3 assigned
MP errors in the last 10 minutes, threshold is 5[/style]. LocationServices 12/9/2014 11:13:15 AM 8836 (0x2284)4 assigned MP errors in the last 10 minutes, threshold is 5. LocationServices 12/9/2014 11:13:35 AM 8836 (0x2284)program
execmgr.log
<![LOG[A user has logged on.]LOG]!><time="10:53:31.978-180" date="12-09-2014" component="execmgr" context="" type="1" thread="828" file="execreqmgr.cpp:4912">
<![LOG[The logged on user is MOJ\aalhasan]LOG]!><time="10:53:31.979-180" date="12-09-2014" component="execmgr" context="" type="1" thread="828" file="execreqmgr.cpp:4931">
<![LOG[A user has logged on.]LOG]!><time="11:13:00.366-180" date="12-09-2014" component="execmgr" context="" type="1" thread="8380" file="execreqmgr.cpp:4912">
<![LOG[The logged on user is MOJ\aalhasan]LOG]!><time="11:13:00.518-180" date="12-09-2014" component="execmgr" context="" type="1" thread="8380" file="execreqmgr.cpp:4931">
<![LOG[CServiceWindowEventHandler::Execute - Received SERVICEWINDOWEVENT : START Event]LOG]!><time="22:00:00.171-180" date="12-09-2014" component="execmgr" context="" type="1" thread="9792"
file="cservicewindowhandler.cpp:37">
<![LOG[CExecutionRequestManager::OnServiceWindowEvent for START]LOG]!><time="22:00:00.203-180" date="12-09-2014" component="execmgr" context="" type="1" thread="9792" file="execreqmgr.cpp:8748">
<![LOG[Auto Install is set to false. Do Nothing.]LOG]!><time="22:00:00.297-180" date="12-09-2014" component="execmgr" context="" type="1" thread="9792" file="execreqmgr.cpp:8760">
<![LOG[CServiceWindowEventHandler::Execute - Received SERVICEWINDOWEVENT : END Event]LOG]!><time="05:00:00.104-180" date="12-10-2014" component="execmgr" context="" type="1" thread="10496"
file="cservicewindowhandler.cpp:37"> -
Assigned MP errors in the last?
Hi, I foung this assigned MP errors in the last in many locationservice logs from one site for me it look like the client have problem to communicate with MP
SCCM client LocationService.log
Executing Task LSSiteRoleCycleTask LocationServices 2013-04-12 12:14:21 3496 (0x0DA8)
1 assigned MP errors in the last 10 minutes, threshold is 5. LocationServices 2013-04-12 12:14:21 3496 (0x0DA8)
Executing Task LSSiteRoleCycleTask LocationServices 2013-04-12 12:14:21 4588 (0x11EC)
2 assigned MP errors in the last 10 minutes, threshold is 5. LocationServices 2013-04-12 12:14:21 4588 (0x11EC)
Current AD site of machine is Tingsryd LocationServices 2013-04-12 12:14:44 3496 (0x0DA8)
Executing Task LSSiteRoleCycleTask LocationServices 2013-04-12 12:16:21 3332 (0x0D04)
3 assigned MP errors in the last 10 minutes, threshold is 5. LocationServices 2013-04-12 12:16:21 3332 (0x0D04)
Executing Task LSSiteRoleCycleTask LocationServices 2013-04-12 12:18:27 4588 (0x11EC)
4 assigned MP errors in the last 10 minutes, threshold is 5. LocationServices 2013-04-12 12:18:27 4588 (0x11EC)
Executing Task LSSiteRoleCycleTask LocationServices 2013-04-12 12:18:27 4588 (0x11EC)
Assigned MP error threshold reached, moving to next MP. LocationServices 2013-04-12 12:18:27 4588 (0x11EC)
Executing Task LSSiteRoleCycleTask LocationServices 2013-04-12 12:20:27 6716 (0x1A3C)
Executing Task LSSiteRoleCycleTask LocationServices 2013-04-12 12:20:27 4316 (0x10DC)
1 assigned MP errors in the last 10 minutes, threshold is 5. LocationServices 2013-04-12 12:20:27 6716 (0x1A3C)
2 assigned MP errors in the last 10 minutes, threshold is 5. LocationServices 2013-04-12 12:20:27 4316 (0x10DC)
Executing Task LSSiteRoleCycleTask LocationServices 2013-04-12 12:23:27 8120 (0x1FB8)
3 assigned MP errors in the last 10 minutes, threshold is 5. LocationServices 2013-04-12 12:23:27 8120 (0x1FB8)
Executing Task LSSiteRoleCycleTask LocationServices 2013-04-12 12:24:27 1508 (0x05E4)
4 assigned MP errors in the last 10 minutes, threshold is 5. LocationServices 2013-04-12 12:24:27 1508 (0x05E4)
Current AD site of machine is Tingsryd LocationServices 2013-04-12 12:29:59 6792 (0x1A88)
Attempting to retrieve lookup MP(s) from AD LocationServices 2013-04-12 12:29:59 6976 (0x1B40)
/SaiTech1 assigned MP errors in the last 10 minutes, threshold is 5. LocationServices 2013-04-12 12:14:21 3496 (0x0DA8)
I've seen those messages on fully functional clients, so it is most likely nothing to worry about.
Torsten Meringer | http://www.mssccmfaq.de
http://social.technet.microsoft.com/Forums/en-US/45a7d465-dc38-4168-bfb4-bdc8f49f17aa/configuration-manager-properties-there-are-only-2-actions?forum=configmanagergeneral
Hi Torsten,
I'm the guy who posted the above question. I have checked recommended log files and mpcontrol.log
I saw some errors but I really dont know how to solve. I have managed te server for a long time and just got this issue recently.
Le Nhut Minh PwC Vietname Limited. -
Dear Gurus,
At the time of posing the service entry sheet iam getting the following error.
RC = 3 M8 147 Account determination for entry TCOA WRX not possible
I checked the OBYC settings.
I have put the debit and credit entries with GR?IR clearing GL account.
Still iam getting the error.
Please help.
NalindaRHi
In OBYC Trancation
Choose WRK Key and click on Rules & uncheck the valuation class check box. Only assign a particular GL Account.
Hope this should resolve your issue
Regards
JK -
Asset assigned po(error in advance posting against asset assigned po
Dear friends
we have an issue regarding asset assigned po,while we are giving Advance against a po there is an error
Item category 07000 not allowed in accounting transaction 1000/0001
Message no. GLT2001
shakti
end the entry is
001 50 0010300861 Outg Chq-Axis CC1Ry 100,000.00-
002 29A 0001000036 KEDIA STEELS 100,000.00
003 70 0020100851 000080600001 0000 100,000.00
004 50 0010600518 AUC Down pmt clrng 100,000.00-
DOCUMENT TYPE-KZ
the issue is still pending
Edited by: shaktiseml on Dec 1, 2009 12:46 PMGo to SPRO --> Financial Accounting (New) --> General Ledger Accounting (New) --> Business Transaction --> Document splitting --> Classify G/L Accounts for Document Splitting
You wil find the GL account is assigned to category 7000
then following setting needs to be done,
SPRO --> Financial Accounting (New) --> General Ledger Accounting (New) --> Business Transaction --> Document splitting --> Classify Document Types for Document Splitting.
Assign document type KZ to transaction 1000 & variant 0001 -
Assign ACL Error in Oracle 11g R1
Hi,
I am Using Oracle 11g Database Release 1 I have created a ACL in my Database, now I am trying to assign the acl using the below mentioned pl/sql script
begin
dbms_network_acl_admin.assign_acl (
acl => 'utlpkg.xml',
host => 'domainnet.com',
lower_port => 1,
upper_port => 10000);
end;
commit;
Error is
Error at line 1
ORA-01403: no data found
ORA-06512: at "SYS.DBMS_NETWORK_ACL_ADMIN", line 477
ORA-06512: at "SYS.DBMS_NETWORK_ACL_ADMIN", line 410
ORA-06512: at line 2
The same Script I have run in another database it is working fine…
I don’t know what is wrong ….
Please advice ….
Thank You
SHANPlease, have a look to the following metalink note
Ora-1403 When Trying to Create a Network Access Control List*
Doc ID: 854083.1*
Note, Only one ACL can be assigned to any host computer, domain, or IP subnet, and if specified, the TCP port range - from the doc here
http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28419/d_networkacl_adm.htm#BABDIGJC
Furthermore, it looks like your host variable is a domain name, did you try to use a wildcard i.e. *.domainnet.com or give the exact host name ?
Nicolas. -
hi every one
while i configured my webutil (specially when i assign sign_webutil for frmwebutil.jar and jacob.jar)
i got this message
C:\ordv\forms\webutil>sign_webutil.bat C:\ordv\forms\java\frmwebutil.jar
Generating a self signing certificate for key=webutil2...
keytool error: java.lang.Exception: Key pair not generated, alias <webutil2> alr
eady exists
There were warnings or errors while generating a self signing certificate. Pleas
e review them.
Backing up C:\ordv\forms\java\frmwebutil.jar as C:\ordv\forms\java\frmwebutil.ja
r.old...
1 file(s) copied.
Signing C:\ordv\forms\java\frmwebutil.jar using key=webutil2...
'jarsigner' is not recognized as an internal or external command,
operable program or batch file.
There were warnings or errors while signing the jar. Please review them.
and this message for the jacob.jar
C:\ordv\forms\webutil>sign_webutil.bat C:\ordv\forms\webutil\jacob.jar
Generating a self signing certificate for key=webutil2...
keytool error: java.lang.Exception: Key pair not generated, alias <webutil2> alr
eady exists
There were warnings or errors while generating a self signing certificate. Pleas
e review them.
Backing up C:\ordv\forms\webutil\jacob.jar as C:\ordv\forms\webutil\jacob.jar.ol
d...
1 file(s) copied.
Signing C:\ordv\forms\webutil\jacob.jar using key=webutil2...
'jarsigner' is not recognized as an internal or external command,
operable program or batch file.
There were warnings or errors while signing the jar. Please review them.
can u gays pls help me
thanking u in advancehi
the problem is in u r configuration please follow the following instuctions and try to configure webutil.what is u r form version?
Please Read it properly
How to get up and running with WebUtil 1.06 included with Oracle Developer Suite 10.1.2.0.2 on a win32 platform
Solution
Assuming a fresh "Complete" install of Oracle Developer Suite 10.1.2.0.2,
here are steps to get a small test form running, using WebUtil 1.06.
Note: OraHome is used as an alias for your real oDS ORACLE_HOME.
Feel free to copy this note to a text editor, and do a global find/replace on
OraHome with your actual value (no trailing slash). Then it is easy to
copy/paste actual commands to be executed from the note copy.
1) Download http://prdownloads.sourceforge.net/jacob-project/jacob_18.zip
and extract to a temporary staging area. Do not attempt to use 1.7 or 1.9.
2) Copy or move jacob.jar and jacob.dll
JacobStage is the folder where you extracted Jacob, and will end in ...\jacob_18
cd JacobStage
copy jacob.jar OraHome\forms\java\.
copy jacob.dll OraHome\forms\webutil\.
The Jacob staging area is no longer needed, and may be deleted.
3) Sign frmwebutil.jar and jacob.jar
Open a DOS command prompt.
Add OraHome\jdk\bin to the PATH:
set PATH=OraHome\jdk\bin;%PATH%
Sign the files, and check the output for success:
OraHome\forms\webutil\sign_webutil OraHome\forms\java\frmwebutil.jar
OraHome\forms\webutil\sign_webutil OraHome\forms\java\jacob.jar
4) If you already have a schema in your RDBMS which contains the WebUtil stored code,
you may skip this step. Otherwise,
Create a schema to hold the WebUtil stored code, and privileges needed to
connect and create a stored package. Schema name "WEBUTIL" is recommended
for no reason other than consistency over the user base.
Open OraHome\forms\create_webutil_db.sql in a text editor, and delete or comment
out the EXIT statement, to be able to see whether the objects were created witout
errors.
Start SQL*Plus as SYSTEM, and issue:
CREATE USER webutil IDENTIFIED BY password
DEFAULT TABLESPACE users
TEMPORARY TABLESPACE temp;
GRANT CONNECT, CREATE PROCEDURE, CREATE PUBLIC SYNONYM TO webutil;
CONNECT webutil/password@connectstring
@OraHome\forms\create_webutil_db.sql
-- Inspect SQL*Plus output for errors, and then
CREATE PUBLIC SYNONYM webutil_db FOR webutil.webutil_db;
Reconnect as SYSTEM, and issue:
grant execute on webutil_db to public;
5) Modify OraHome\forms\server\default.env, and append OraHome\jdk\jre\lib\rt.jar
to the CLASSPATH entry.
6) Start the OC4J instance
7) Start Forms Builder and connect to a schema in the RDBMS used in step (4).
Open webutil.pll, do a "Compile ALL" (shift-Control-K), and generate to PLX (Control-T).
It is important to generate the PLX, to avoid the FRM-40039 discussed in
Note 303682.1
If the PLX is not generated, the Webutil.pll library would have to be attached with
full path information to all forms wishing to use WebUtil. This is NOT recommended.
8) Create a new FMB.
Open webutil.olb, and Subclass (not Copy) the Webutil object to the form.
There is no need to Subclass the WebutilConfig object.
Attach the Webutil.pll Library, and remove the path.
Add an ON-LOGON trigger with the code
NULL;
to avoid having to connect to an RDBMS (optional).
Create a new button on a new canvas, with the code
show_webutil_information (TRUE);
in a WHEN-BUTTON-PRESSED trigger.
Compile the FMB to FMX, after doing a Compile-All (Shift-Control-K).
9) Under Edit->Preferences->Runtime in Forms Builder, click on "Reset to Default" if
the "Application Server URL" is empty.
Then append "?config=webutil" at the end, so you end up with a URL of the form
http://server:port/forms/frmservlet?config=webutil
10) Run your form.If its Correct/Helpful please mark it thanks.
Sarah -
Hi I have developed a task assignment adapter for approval.I am hardcoding the group name and then qurtying database to find the group.Then from the resultset I am getting the value of the group key.and then I m writing two tasks to get the key and the key type.
I am getting the following error
Running PUTGROUPINHASHMAP
2008-09-05 12:09:48,640 INFO [STDOUT] Target Class = com.thortech.xl.util.adapters.tcUtilHashTableOperations
2008-09-05 12:09:48,640 INFO [STDOUT] Running QUERYDATABASE
2008-09-05 12:09:48,703 INFO [STDOUT] Running GETGROUPKEY
2008-09-05 12:09:48,703 INFO [STDOUT] Running SETKEY
2008-09-05 12:09:48,703 INFO [STDOUT] Target Class = com.thortech.xl.util.adapters.tcUtilStringOperations
2008-09-05 12:09:48,734 ERROR [XELLERATE.DATABASE] select ugp_key from ugp where ugp_key =
java.sql.SQLException: ORA-00936: missing expression
But when I am hardcoding the group key then its working fine.
I just dont know where the error is.
Please help me regarding this.
I think OIM is querying database but is not able to find the group,but the group which I putting in hashmap is present.I suppose I was not clear in my query.
Actually I have a situation in which if a user logins and requests a resource then I get the above error and as a result of which the approval goes to the Xelsysadm and not the group that I have assigned.
But when I login as Xelsysadm i.e system administrator and then if I request for a resource for any user by clicking the request menu item then the approval is working fine i.e it goes to the group that I have assigned.
Please help me regarding this
Edited by: jason_2007 on Sep 7, 2008 11:50 PM -
TU/door assignment overlaps error and incorrect dates in yard door period view
Hello friens,
I am trying to conform yard movement warehouse order from source parking bin to destination door bin of warehouse. I am getting below error. I have already checked yard door in /scwm/mon. There is no TU assigned to door. The door is free, But in the same window when I checked yard door period view, I found that my door is occupied until 31-Dec-2014. i.e. free from 31-Dec-2014. My questions are
(1) If my door is free from TU as per the status then why and from where occupied from and free from dates appears in yard doors in period view tab of /scwm/Mon?
(2) How to get rid of these dates?
(3) I am getting below error while confirmation of warehouse task. How to get rid of below error? I believe if above point 2 is resolved then I will be able to confirm warehouse task.
"TU/door assignment from 07.03.2014/16:58:59 to 31.12.2014/22:59:59 has overlaps"
Thanks,
MilindHello friends,
I found out the root cause of analysis which is the answer of point 1 above. I need answer of point 2 above which I believe would resolve point 3 question.
Occupied from and free from date in /SCWM/MON in yard management----->Yard doors come from what we maintained in default values while creation of TU in transaction code /SCWM/TU. In this transaction, default end date was 31.12.2014(31-Dec-2014). This is the reason why I am getting the issue.
Now the issue is, my door is free as there is no TU assigned. However, /SCWM/MON in yard management----->Yard doors entry is still visible without TU but presence of S&R number and there the occupied until date is 31.12 2014. My question is, how to get rid of this entry? -
Item Category D and Account Assignment F error message in RFQ
Hi gurus,
Am experiencing a strange error message creating an RFQ from a Purchase requisition generated by a maintenance order : "Combination item category D/account assignment category not defined".
The combination Service D/ Order F is actually defined in customizing step : "Define Combination of Item Categories/Account Assignment Categories": The Purchase requisition in indeed created without any problems with this combination of item category / account assignment which is pretty confusing, Is there an specific step for RFQ somewhere ?
Thks for your feedback !
OlivierHi
Check the configuration in the following menu path:
IMG - MM - Purchasing - RFQ/Quotation - Define document types
Check the item categories allowed & then select the item category D & check whether you have combination of PR with item category defined.
Other than this I do not think there is any other specific combination.
Remember that in RFQ you don't see the account assignment catgory.
Regards
Prasad -
BDC to assign MIC -:Error occurred when checking type $ group $.
Hi
We have developed a BDC program to assign MIC`s in routing operations,at the end of assigning the MIC`s in the operations the system is giving the below message .
Error occurred when checking type $ group $.
Please note that 100% sampling procedure is assigned in MIC`s.
Please advise how to recfity the same .
PS :- while creating it manually there are no errors.
Regards
Trishna NambiarThere was some problem with Sampling unit of the MICs assigned in the operations. This caused the error. Error log was in Tasklist checklist in the Inspection plan.
-
True Account Assignment- Posting Error
Hi
Can anyone help me out from the below error.
Enter a true account assignment object with revenues
This error message comes when i try to post an entry in F-22. I couldnt under the sys Diagnosis
message.. can anyone explain me in simple term with example. please
ThnxIt is looking for real cost object. you need to enter profit segment with manual derivation. In the line item go profit segment field and derive the by entering relevant fields such as business area, sales organization.etc.
Maybe you are looking for
-
I tried downloading AND RUNNING the upgrader and I'm stuck in an infinite loop. After running the upgrader from the utilities folder, it looks like things are working. Then a window pops up asking me to launch iphoto to complete the upgrade. After
-
I signed on for the 9.99 month Photoshop plan right away - I feel I should be getting Lightroom also now that that promo is available to everyone - it's like I'm punshed for being an early adopter.
-
Converting a gradient from a spot color to a process build, hides vector elements
I have been using Illustrator for many years and consider myself very familiar with it, but recently ran into a strange issue I have never seen before. The background element is a radial gradient with points of 0% to 50% of a spot color. The file cam
-
IMessage isn't working on iPad .. It ask me to sign in with my Apple ID then it tell me some kind of error happene ..please help !!!!!
-
Communications avec un fluke 45
Bonjour, Je suis actuellement en train de créer de travailler sur un projet TRES URGENT (récupération de données d'un multimètre Fluke 45 avec LV) pour tester Labview. dans lequel nous communiquons via RS232 avec un multimètre Fluke 45. J'ai utilisé