UCCX Calls Waiting in Queue Customer Request

Hi. Currently we have a customer with a no so common request. Their supervisors would like to have the ability to see Caller ID for the people waiting in queue. They currently only see the longest call in queue (time) and how many calls in queue (total calls). Also they would like the option to pick any call they want from all calls waiting on queue. At least for the Supervisors.
Supervisors are saying that they work on a previous CallCenter environment and they were able to accomplished those 2 request. See Caller ID of the people waiting on queue and also the ability for the supervisor to choose any call they want to from the ones waiting on queue. I don't know if that was a feature out of the box for that particular Call Center environment (Don't know the vendor CC) or if it was a custom job.
Any ideas? Is it possible on UCCX?
-Jose

Hi,
can you please tell me the license level of your UCCX? Premium, Enhanced, Standard or IP IVR?
G.

Similar Messages

UCCX - Call Waiting Tone?

Does anyone in the community know of a way to send an audible tone to agents (via the ear piece) when a call is in a Queue they belong to?
My client is replacing an Aspect system which offers this functionality and they would like to have this when UCCX is implemented.
Thanks,
Tom

The only idea I have seen on this topic is to create a shared line appearence with the Idle Alert Setting set to Beep and the Busy Alert Setting set to None on all of the agents' phones. Within the script you can use a place call step to ring the DN for a few seconds and then just terminate it right away. It's far from ideal but it's better than 'not possible'. Be careful with your CTI Port utilization here; I would add a sepearate CCG for this.

Using CUIC to Show Calls Waiting on UCCX 9.0.2

Hi,
I am about to deploy UCCX 9 for a customer, and they want to use CUIC to replace their existing wallboard. This appears to be fine with the exception that none of the existing or available report definitions show calls waiting (as they are based on the Historical Reports Package).
Can anyone offer any advice, or share a report definition that would allow me to show this?
Regards
Tony

Hi Tony
I've not played with CUIC properly myself, but basically you need to get a Lab or NFR kit for CUIC Premium; with that you can created customised reports and import those to the UCCX system.
Regards
Aaron

How can I re-release the Customizing request

Hi,
Yesterday, I released a customizing request to QAS. At the QAS, I used the T-code STMS to check the import request, I could not find out it.
But, today, I released another customizing request to QAS. I can find out it. I don't known what had happened.
Could I re-release the CR? How to deal with this question?
Waiting for answer, THX
jk

Dear all,
Thanks for your time. The problem is still have.
I have released the Task and Sub-task, and I checked the import queue in which there isn't the TR.
I released a new customizing request, it can be find out the import queue.
I think the transport routes maybe have problem at yesterday, so I want to re-transport the customizing request.
Which method can I choose to do that?
jk

When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

UCCX 7 URL For Queue Status?

We have agents using the CAD, but they would like to be able to have a view of what is going on in the queues. Our type of calls are medical and technical in nature and could be handled differently if we know there are calls in the queue. (Such as hurry through or call them back) The goal is to not have anyone waiting in the queue if possible. So, in using the IP Phone agent in testing, I noticed that the phone agent shows the CSQs on the phone. Is there a URL on the UCCX server that will show me that view that my agents could view using a web browser? Thanks in advance.

Hi
CAD tool itself has real time reporting capability for the CSQ which the agent belongs to.
Please check the section "Agent Real Time Display" section in the link below
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/user/guide/cad66ug-cm.pdf
Also you can explore the options of wallboards which can show real time statistics of all the CSQ's
Hope this helps
Anuj

How do we alert agents that there are other calls in the queue?

Hey,
I'm trying to figure out a way to alert agents that there are other calls in the queue (whether they're ready or not-ready). I've seen systems that have a separate button on the phone that flashes when there's a call sitting in the queue.
The purpose of this is two fold:
1) if they are on a call they know they need to step up the game a bit to get the current issue resolved.
2) if they are "not-ready" and didn't notice the software, the blinking phone should help jump-start their brain to think "why isn't my phone ringing?"
A wallboard, while nice, is not practical for the situation i'm looking at (information desk). I'd like to minimize the number of things they have to keep track of (walk-ins, a PC, and the phone only), and a flashing button seems like a good way to do that.
Has anyone seen something similar to this on UCCX?
JM

Hi thanmad,
I don't have a sample script with me on hand now, the script i did before is part of our production scripts. But the script required to alert the agents is fairly simple.
First part is identifying when you would like the alert to be triggered, for example say when the call is been in the queue for 2 minutes. You can achieve this in different ways; you can use “Get reporting statistic” and use a field which will give you the Current wait duration of the caller, in this case Report object “csq ipcc express” need to be selected. You then need to compare the result with the predefined duration (seconds) and if the result is higher, then trigger the Alarm.
The Alarm is triggered to the alerting device by using “Call Consult Transfer” set a time out for it and then send the call back to the Queue. Make sure this device doesn’t have any VM setting or forwarding configured to it. If you don’t want reporting statistics you can just put this step where you want in the script and when the call hits it, it will trigger the alarm.
Not sure if it makes sense to you but I would recommend you playing with it and see if it is what you are looking after.
HTH!

UCCX Estimated Waiting Time

Hello, I'm trying to add EWT to a script, once the call reaches the queue they hear:" your estimated waiting time is 1 minute" and then:"we are experiencing some system problem" error message. What I did in the "Select Resource “under the Queue I add "Get Reporting Statistic" with the setting Expected waiting time and CSQ IPCC Express. Also I placed a "Switch “tag for the AVG waiting time in minute and I configure 1 to 10 with .wav file for each minute. Any suggestion? the software is UCCX 5 enhanced.I'm attaching the file. can somebody direct on me what i'm missing or send me a file to use as a tamplate?
Thanks.

The message "we are experiencing network problems" usually means 2 possible things:
1. some java exception occured while your script was running
2. your script has ended without hanging up
Run script in interactive debug and you will see what exactly is going on.
ervins

Weblogic queues each request from Web Services client

Hello everyone,
Currently, I have a performance issue deploying a web services application on Weblogic 11g Patch1 (10.3.2).
There are 40 clients which consume Web Services. After Weblogic queues each requests (40 requests) which takes about 2 or 3 minutes, then it starts to process the request (i.e. try to connect AuotVue Server with a servlet called VueServlet).
I also found that during the process of queuing, even I ping the VueServlet or Web Services WSDL file in IE, it will take a long time to response.
Look like all the weblogic resource is used to receive the requests and no resource is available for VueServlet.
The problem happens when I deploy WS on windows 2003 server which is VMware machine with 3G RAM, and it doesn't happen when I deploy it on Windows 2008 server with 4 G RAM and duo cpu.
Any help will be appreciated.
Thank you very much.
Song

Maybe there are some problems with WebLogic and Windows 2003. See also this thread Oracle HTTP Server (OHS) Installation Problem on Win 2003 Server SP2
I think it would be handy if you file a support request.

Calls abandoned in queue

Hello there,
Please could anyone explain to me the difference between a call being abandoned from the router queue and from the TDM queue?
Also, can anyone tell me how the TDM works? Please be kind to me an use simple language.
This is the definition for calls abandoned in queue from Cisco Help:
"The number of queued tasks for the skill group that were abandoned from the router queue (not the TDM queue) in the half hour interval"
Thank you in advanced.
Erica

Hello Erica,
I suppose that you are referring to the number of callers who have abandoned in IVR (Interactive Voice Response) when you say "calls abandoned in TDM queue". Those are the callers who have dialed the Contact Center number, the IVR responded with a welcome message and eventually some pre-recorded prompts. Customers who choose to close the line at this level (they did not speak to an agent) are considered as abandoned in IVR.
As for "abandoned in queue", those are the callers who have heard the welcome message, and then heard pre-recorded messages, navigated in the IVR menu and selected the option to speak to an agent. The call is now transferred to the Queue. If all the agents are busy, then the caller will hear the Hold Music. If there's an available agent, the customer will speak to the agent. Customer who close the line while listening to the Hold Music are considered as abandoned in queue (or "router queue" in UCCE terminology).
Hope this helps,
Justine.

Wait...Your request is being processed

Hi,
I am successfully downloading a PDF document, but the calling window never stops processing and displays <b>Wait...Your request is being processed</b>.
How can I prevent that?
Here is some coding from the OnInputProcessing event handler:
* some Browsers have caching problems when loading PDF format
runtime->server->response->set_header_field(
                     name = 'cache-control'
                     value = 'max-age=0' ).
* set file name
runtime->server->response->set_header_field(
                     name = 'content-disposition'
                     value = lv_filename ).
* finally display PDF format in Browser
runtime->server->response->set_data( data   = l_pdf_xstring
                      length = l_pdf_len ).
navigation->response_complete( ).
Thanks.
/Elvez

Hello Elvez,
this behavior is do to the <xhtmlb:protectDoubleSubmit> what can not be user together with download. As the browser where the protect is active is never reciving a repsonse from the server. >> It does not knows when to remove this element.
Please correct your page.
Best regards,
Dezso

Call waiting

call waiting phone makes noise to tell me other call coming but does not show number why?

The call waiting ID is a separate feature than call waiting and caller ID. You would need to verify its on your account. If its not on your account, it would need to be added by someone in the sales and billing office. If you need additional help with this, please send me a private message.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

What does a telephone service subscriber have to do to stop call waiting service?

I pay $8.25 a month for call waiting. I have called in twice now to have the service stopped as I do not use it. The latest being April 17, 2015. In the 2 bills since that date the charge for call waiting still shows on my bill. The last time I called in the customer rep assured me I no longer have the service and will not be billed for it. What else can I do?

Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.
Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions.
To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
Please keep all correspondence regarding your issue in the private support portal.

LSMW recording SM30, prompt for customizing request

Hi everyone,
I'm trying to use lsmw for uploading data into a customizing table. For this I recorded the creation of an entry with transaction sm30. At the end of the recording (when saving) the prompt for a customizing request pops up. When executing the resulting batch input, it get's confused (in my opinion because of the transport request popup in the recording).
Is there a way to prevent the popup?
I've read in a different thread that I can create 1 entry, then do the recording for the lsmw in the same session. This sounds good to me, but I don't see how to do this.
If anybody has an idea how to solve this, it would be great.
Regards,
Monika.

Hi
No u can't prevent that popup, because u're trying to update a customing table: you should considere two main things:
- The call of the request popup can depend on the kind of the client, i.e how the client (dev, test or prod) is set;
- If the cleint is closed, so the modifications are not allowed (for example in production system), your lsmw project can't works.
Anyway by SE11 u can try to create a maitenance view table based on the database table u need to update, leave cutomizing flag and generate the maintenance program (for trx SM30) for this new view: probably now it shouldn't show the popup for the transport (but I'n not sure), if it works u can use it in your project.
It's very hard to manage a table control in LSMW, u can't know how many recodrs u need to update and u can't change the bdc program generated for lsmw.
In this situation the best solution is to insert only one record: i.e. for every record u need to update:
- CALL SM30
- Press NEW ENTRY
- Insert the new record to the top of table control
- Save
- exit
In this way your bdc program doesn't depend on the number of records, as you manage only one record, i.e your project will create a bdc session with as many transaction as many records to be inserted.
Max

1) When call center Team creates Service Request/Service Order/ Complaints it should be set as High Priority by default.

Hello team ,this is my requirement .. Through customizing..
When call center Team creates Service Request/Service Order/ 　Complaints it should be set as High Priority by default...we need to set only interaction agent bussiness role priority only HIGH..only for this bussiness role.through customizing how to do it..what are the steps..through customizing only please.. help

By customizing, you can set a default priority to a given transaction type.
But this does not depend on the business role.
But as you are talking about IC agents, maybe you can check IDI for this purpose, because there are actions like "Set Problem Priority", "Set Service Request Priority" or "Set Service Order Priority".
Best regards,
Sylvain AGUETTAZ

UCCX Calls Waiting in Queue Customer Request

Similar Messages

Maybe you are looking for