UITableView each cell has image, title and text

Hi, I have a UITableView and right now each cell has an image and a text. I would like to change the layout a little bit.
For each cell, on the left you have an image. On the right, the top portion has Title which is in large fonts and bottom portion has text which is in smaller fonts. Does UITableView already support it or I have to write my code to customize it?
Thanks,
ff

You need to configure a custom cell, either in code or in IB using a subclass of UITableViewCell. There are excellent, well explained examples of both techniques in Chapter 8 of Mark & LaMarche (and based on many of your questions, I think a few hours with that book would save you months of looking for free sample code). However there's also a good discussion with sample code in the +Table View Programming Guide for iPhone OS+ under Customizing Cells.

Similar Messages

  • I have a one-column table in pages.  Each cell has text and a number separated by a colon.  Can I automatically make it two column with everything to the right of the colon in the second column?

    I have a one-column table in pages.  Each cell has text and a number separated by a colon.  Can I automatically make it two column with everything to the right of the colon in the second column?

    Here's another way that is pretty quick to do.
    Formula in Column B is:
    =LEFT(A, FIND(":", A))
    Formula in Column C is:
    =RIGHT(A, LEN(A)-FIND(":", A))
    You can eliminate the colon from the result in column B by writing:
    =LEFT(A, FIND(":", A)-1)
    Once you do the conversion, you should freeze the result by Selecting columns B and C and then Command-C, Edit > Paste Values.
    Regards,
    Jerry

  • Hello, I would like to create and print a contact sheet in Photoshop elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show up on the

    Hello, I would like to create and print a contact sheet in Photoshop elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show up on the contact sheet when I print them out. If this is not possible I will just return my product. I have an old old version of Photoshop that will do just that but with this new elements I cannot find it.

    markc
    What computer operating system is your Premiere Elements 13/13.1 running on?
    Assuming Windows 7, 8, or 8.1 64 bit, open the Elements Organizer 13/13.1 and select your media
    for the Contact Sheet.
    Go to File Menu/Print and set up the Print Dialog for Contact Sheet.
    If you used Edit Menu/Add Caption beforehand, I can see how you can get
    Date
    Caption
    Filename
    under the Print dialog's "4" and even a page number if you have more than 1 page. But, I am not seeing
    where you are going to get a title for each of the contact sheets.
    Any questions or need clarification, please do not hesitate to ask.
    You can get into the Elements Organizer 13/13.1 from the Welcome Screen or by clicking on the Organizer Tab
    at the bottom of the Expert workspace in the Premiere Elements 13/13.1 Editor.
    Please let us know if we have targeted your quesiton..
    Thank you.
    ATR

  • Hello, I would like to create and print a contact sheet in Photoshop Premier Elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show u

    Hello, I would like to create and print a contact sheet in Photoshop Premier Elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show up on the contact sheet when I print them out. If this is not possible I will just return my product. I have an old old version of Photoshop that will do just that but with this new Premiere Elements I cannot find it.

    markc
    What computer operating system is your Premiere Elements 13/13.1 running on?
    Assuming Windows 7, 8, or 8.1 64 bit, open the Elements Organizer 13/13.1 and select your media
    for the Contact Sheet.
    Go to File Menu/Print and set up the Print Dialog for Contact Sheet.
    If you used Edit Menu/Add Caption beforehand, I can see how you can get
    Date
    Caption
    Filename
    under the Print dialog's "4" and even a page number if you have more than 1 page. But, I am not seeing
    where you are going to get a title for each of the contact sheets.
    Any questions or need clarification, please do not hesitate to ask.
    You can get into the Elements Organizer 13/13.1 from the Welcome Screen or by clicking on the Organizer Tab
    at the bottom of the Expert workspace in the Premiere Elements 13/13.1 Editor.
    Please let us know if we have targeted your quesiton..
    Thank you.
    ATR

  • Broadcast/SD Titles and Text: Workflow

    I'm curious what, when doing Broadcast Titles and Text, is your workflow.
    Do you exclusively make slates in Illustrator etc.? Do they look significantly better and function better for Broadcast product than making same in LIveType or Motion. Is there a big quality advantage in Vector based Titles/Text
    Do you make any of your Titles/Text in LiveType or Motion.
    Is there another workflow for high quality Titles/Text you would recommend?
    Thanks

    I've used both LiveType and Motion for titling some very large QuickTime files (1440 x 900 @ 25fps) and the quality is perfect. As high a quality as you could ask for.
    I can understand the rationale for saying that Illustrator would give better results that PhotoShop (vector vs. raster), but if you're working with the native LiveType file in FCP you're still in a vector environment (at least I think so - anyone care to comment?).
    It's the same argument for using vector-based files rather than pixel based ones for DTP applications that are going to be printed by a commercial printer: The printer's RIP rasterises the file just once at the correct imaging resolution.
    To my mind, a vector is a vector: I can't see how Illustrator can give you 'better' vectors than LiveType or Motion - if you're using FCP to 'RIP' either of the original files to pixels, that is. Perhaps using a 3rd party rendering engine would give you better quality, in the same way that different PostScript RIPs give better quality than others.
    Maybe that's the reason why some people use Illustrator - as the non-FCP RIP can't handle native LiveType/Motion files?

  • Report Title and Text Area issue when exported to pdf using Viewer

    Hi there,
    We are using OracleBI Discoverer Version 10.1.2.55.26
    We have reports that displays Report title containing the following
    - Report Title
    - Runt Date and Time
    - Page No
    And text area which displays 'Last Page'
    Following properties are set at the worksheet level using page setup
    Report Title --> 'Print on every Page'
    Text Area --> 'Print on last page'
    The report when exported to PDF using Discoverer plus works fine and displays report title and text area as defeined.
    But when we try to export the same report to pdf from Discoverer viewer, it displays
    - Report title on first page only.
    - text area on all pages
    All our users accesses report using discoverer viewer so we cannot open discoverer plus to them.
    Is there a solution which will enable us to export the report in pdf using discoverer viewer and displays the same output as discoverer plus.
    Please let me know... If you have any questions then please feel free to ask.
    Thanks in advance for your help...
    Manish

    but when opened on other os x machines some text is colored differently than it should be
    Well, if typographic objects are colour managed, the colour appearance is dependent on the source ICC profile that describes the colourants in the typographic objects and the destination ICC profile that describes the colours the display is able to form and the RBC colourant combinations that will form those colours.
    In general, typographic objects should have special treatment, since the expectation is not that typographic objects should be colour managed, but that typographic objects should simple be set to the maximum density of dark. On a display, that is R=0 G=0 B=0 and on a seperations device (a lithographic press) that is C=0 M=0 Y=0 K=100.
    If for some reason typographic objects are colour managed, and if the ICC profiles for the displays are off by half a mile or more in relation to the actual state of the display system, then the colours will not be the same. On the other hand, if those displays are calibrated and characterized, then the colourants will be converted to form the same colours on the displays.
    /hh

  • Share Image,Link and Text to Social Networking App from My Windows Phone App

    Hi,
    I am developing windows phone 8.1 silverlight app where I want to share Images,Links and text to Social Networking App Like Facebook,Twitter,Whatsapp and Instragram.
    In Share content contains A Image of App Icon, A Link of App website and I invitation Text.
    There are Five buttons
    Share by Email
    Share by Facebook
    Share by Twitter
    Share by Whatsapp
    Share by Instragram
    Problems which I faced
    I can not attached image to Email. How it is Possible.?
    I can only open whatsapp from my App. But can not share to this
    I have used Share task but in list of app there is no whatsapp and instragram app ( I know there is no official app for instragram but it is Instragram Beta app)
    Please guide me how can I share my content to all above app

    Please see this sample application:
    https://code.msdn.microsoft.com/windowsapps/Sharing-Content-Source-App-d9bffd84
    You cannot control what appears in the share UI.  The Share UI Will show all applications that have registered to receive the type of content you are sharing.  So if a particular application is not appearing, then it is not registered as a Share
    target for that content type.
    I would run the sample on your phone for the various content types.  it should give you a good idea of which apps are registered for which content type.
    Bret Bentzinger (MSFT) @awehellyeah

  • TITLE AND TEXT SYMBOLS disappear in report LDB

    Friends,
    Im changing a select-screen generated in a LDB program but when i add my select-screen cant see its titles and text elements. Need help please....

    Hi Darill
      You can check this information access report source code and follow steps below:
         - Se38
         - Inform report name
         - goto -> Text elements - > Selection  Texts
    Please, be ensure that this object is active in the system and check it there is texts or Dictionary ref flag is set.
    It should solve this issue
    Kind regards

  • Need to make a 20 second HD clip with a moving image background and text thats flies in...

    Hi all im quite new to after effects and need to make a 20 second HD clip with a moving image background and text thats flies in. I also need to create a basic cross image. If anyone could suggest the best way to go about doing this it would be greatly appreciated. Thank you in advance

    Thank you for both of your reponses and I will try and be clearer:
    what I want to acheive is a HD motion graphic of text which will almost spin onto the screen letter my letter and then a become static word. Behind this I would like to place a moving image clip.
    By 'basic cross image' what im looking to do is use a cruifix shape instead of a 't' on the text.
    I hope this makes sense and thanks again!

  • How do I set a default title and text style on Quick?

    On Adobe Premiere Essentials 13 video editing, if I use Quick is it possible to set a default style for titles and text? I see instructions for setting a default style in Expert, but that doesn't seem to work in Quick. Thanks.

    aperture14
    What is this Premiere Elements Essentials 13? I know the program only as Adobe Premiere Elements 13 for Windows or Adobe Premiere Elements 13 for Mac. On what computer operating system is it running and is it a pre-installed program from the computer manufacturer?
    So, if you have some modified version of Premiere Elements 13 Windows or Mac, I cannot give you a yes or no answer to
    if I use Quick is it possible to set a default style for titles and text?
    In Adobe Premiere Elements 13 Windows (assumed Mac also), there should be no problem in creating a text title in the Quick workspace and saving a particular text style and setting that created text style to the default. Are you OK with doing that in the Expert workspace if not the Quick workspace?
    Please give us more details of your situation so that we can customize a reply for you.
    Thank you.
    ATR

  • APE4  Title and Text Animation

    I am trying to animate some multi line titles.  I found that the animation, Scalein, only works on a single line of text. Is this correct or am I doing something wrong.  The animation worked on a singel line but not on a multi line title.
    Thanks.
    Cheers!  Phil

    For working with multiple lines of text and animation, you can create several Titles, each with one line of text. These would be stacked above any footage on higher Video Tracks (VT's). Each single line can then be animated with the same, or different Effects.
    Depending on what one needs and wants, another way would be to do the Title with a block (multiple lines) of text, and then Keyframe, say Motion>Position for that Title. An example would be to have the Title begin off-screen and then "move" into the scene from the right, with Moton>Position Keyframes, hold for a period of time, then move out of the screen left, again with Motion>Position Keyframes. You will probably have to grab the right side of the Title and drag it to get the desired Duration.
    Good luck,
    Hunt

  • Problems with moving images, widgets and text.

    Apologies if this question has already been asked. I think there has been a similar question asked but can't see a solution and I'm not sure if my problem is slightly different.
    I have been designing a Muse website on a MacBook Pro, and placing widgets, text and images where they look correct in 'design' mode, but when viewing online, some items do not remain the same size and/or have moved. When viewing on a larger screen, such as an iMac, the positioning and sizing is even worse.
    I can't figure out how to lock / maintain the correct sizing and positioning of items such as a 'youtube' video, text boxes and graphics in general as they appear in design mode.
    I'd be VERY grateful if someone more experienced could advice how to avoid items changing when viewing on different sized screens.
    Please see the difference between the appearance on a MacBook and iMac to better show what I am hoping to resolve.
    Thank you in advance.

    When I try to move a stack between two stacks, it becomes part of the other stack. The black line is highlighted.
    I want to organize my stacks so the best are at the top of the grid.
    Thanks for any help.

  • Transfering image, sound and text from server to client

    I implemented a client and a server and right now it is only implemented that it transfers only plain .txt documents only. Now I want to alter it to transfer everything.
    I was thinking about reading the data and then create a new file in the client and copies that data with the same extension as the one read from. Though I tried it out for an image and I wasnt allowed to do so since FileOutputStream can't read an image.
    Can please someone give me some ideas what shall I do in order to be allowed to transfer everything?
    thanks very much

    to read only text file I had the following code
      kkSocket = new Socket(host, 4444);
                 out = new PrintWriter(kkSocket.getOutputStream(), true);
                BufferedReader in = new BufferedReader(new InputStreamReader(kkSocket.getInputStream()));
                // read parameters
                String[] params = in.readLine().split(",");
                Integer noOfBlocks = Integer.parseInt(params[0]);
                Integer blockSize = Integer.parseInt(params[1]);
                Integer lastBlockSize = Integer.parseInt(params[2]);
                String inputLine = "";
                for (int i = 0; i < noOfBlocks - 1; i++) {
                    // read blockSize bytes
                    inputLine += readBlock(blockSize, in);
                // read lastBlockSize bytes
                inputLine += readBlock(lastBlockSize, in);
                System.out.println(inputLine);The above code displays it only on console.. Now I added the following code in order to be saved in a file:
    File x;
                x= new File("C:\\newfile.jpeg");
                x.createNewFile();
                FileOutputStream fop = new FileOutputStream(x);
                fop.write(inputLine.getBytes());
                fop.close();When I added the last snippet of code I am having these errrors:
    java.net.SocketException: Connection reset
    at java.net.SocketInputStream.read(SocketInputStream.java:168)
    at sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:264)
    at sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:306)
    at sun.nio.cs.StreamDecoder.read(StreamDecoder.java:158)
    at java.io.InputStreamReader.read(InputStreamReader.java:167)
    at java.io.BufferedReader.fill(BufferedReader.java:136)
    at java.io.BufferedReader.readLine(BufferedReader.java:299)
    at java.io.BufferedReader.readLine(BufferedReader.java:362)
    at client.ClientMain.main(ClientMain.java:29)
    Couldn't get I/O for the connection to: localhost
    Java Result: 1

  • Check box or radio button to control image opacity and text field. javascript

    This is a little over head and skill set so I am reaching out to you fine people.
    I am using Adobe acrobat pro x
    I have radio buttons now but I can switch to check box if needed.
    What I need the Java script to do is...
    If Yes is checked then a text field labeled comments appears and an image labeled box changes the opacity to 100%.
    If No is checked then it does the opposite. Text field disappears and image goes to 0% opacity.

    This is the Adobe Reader forum.  You are more likely to receive a helpful answer if you ask in the appropriate Acrobat forum (e.g. Acrobat SDK).

  • Blurry Titles and text on HD 6.0!!!

    hello everyone, I just got my new 12' powerbook and its my first mac ever... and I LOVE IT!!! I have no idea why I have been using pc all my life, macs are so much better!
    anyways, onto the PROBLEM... I have the new ilife '06 and I have installed imovie HD 6 but when I try to add a title onto black (and I havent tried on clips) it turns out very fuzzy and very unprofesional... when I preview it, it looks great, but not when I add it to my timeline... CAN SOMEONE PLEASE HELP ME!!!!
    thanks...

    It's not a problem, it's an intention. You would need a quad g5 top of the line to run the video in full resolution in real time! Too much data, so they arteficially reduced the resolution in iMovie for us to be able to happily edit our movies on slower machines. Your final DVDs will look just fine, believe me, they simply will. Same with other codecs in .mov files for QT playback. If you choose any codec and the highest possible quality, you will get almost sharp titles. But not in iMovie itself. I personally have set up the lowest preview quality in iMovie, because I prefer application speed ahead of viewing quality. I rather look at fuzzy than jerky subtitles. But again, everyone has different opinion. The end product is what counts anyway, right?
    Cheers.

Maybe you are looking for