UK lenovo parts dealer needed

hi 2 all,
I am looking for lenovo parts dealer in UK. I would like to buy a normal wifi card and replace manufactory installed crap (INTEL 2230).
I want a WiFi AC+BT4.0, Ltn BCM4352+20702 2x2AC+BT4.0 HMC  FRU:20200381, that i found in a manual book.
any body can give me a link to genuine lenovo part dealer please? I tried all week to find the dealer with something else than:a psu,a bag and a keyboard, and nothing.
I would like to avoid to hack a bios, but it seems lenovo have customers in deep ######,
best regards for all and lenovo team.
ps. sorry for my english. I have hope that's clear enough.
Moderator Note; subject edited

welcome to the forum!
i have a lead for you on a display.   i sent you a PM about it.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Similar Messages

  • Are genuine Lenovo parts still available for the T series?

    So far, I've been quite lucky with my T60p Thinkpad, as I haven't had to service is since purchasing it in 2006. 
    Now I'm replacing the hard drive (with a Hitachi Traverstar) because it's starting to fail some system tests, but I also anticipate having to replace the heatsink fan, as I'm sure after this many years and so much dust (which I blow out periodically) it's bound to fail eventually.
    I looked up my Lenovo part number for the heatsink -- it is 41V9932 (Im not sure if the fan is possible to replace without replacing the whole heatsink assembly?).
    But where can I buy geniune Lenovo parts for these laptops?  I searched the "shop Lenovo" store on this site, and they do have some things but not those internal components that I need. 

    Welcome to the forum!
    Try IBM directly. Expect to pay a pretty penny there.
    Also try eBay, plenty of new fans available there.
    It is possible to replace just the fan, however, my personal choice is to replace the entire assembly. YMMV.
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • I have a MacBook 13-inch, Late 2009, I'd like to get a cable to connect a monitor.  However I keep order the wrong part.  Can somebody tell me what part I need.

    I have a MacBook 13-inch, Late 2009, I'd like to get a cable to connect a monitor.  However I keep order the wrong part.  Can somebody tell me what part I need.

    The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort.
    The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports. Each would take a different adapter to connect with the TV.
    To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion). When System Profiler comes up check the Model Identifier and post it back here.

  • WHAT PARTS ARE NEEDED TO SHOW MY MAC 10.8.4 OVER TV-.

    WHAT PARTS ARE NEEDED TO SHOW MY MAC 10.8.4 OVER TV….

    About AirPlay Mirroring in OS X Mountain Lion
    You need:
    An AirPlay-enabled device such as http://store.apple.com/us/ipod/ipod-accessories/apple-tv
    A suitable TV monitor
    A network
    HDMI cable
    A compatible Mac:
    iMac (Mid 2011 or newer)
    Mac mini (Mid 2011 or newer)
    MacBook Air (Mid 2011 or newer)
    MacBook Pro (Early 2011 or newer)
    Or, depending on the model Mac you intend to use: a Thunderbolt or MiniDP or DVI to HDMI adapter for a wired connection to your TV or AVR

  • Does apple care cover key pop out? i have all the parts just need to reassemble back

    i have all the key and the other parts just need to reassemble back

    Applecare covers manufacturer defects, but not physical damage. So, probably not covered. But if the key just fell off you could argue that it was a manufacturer defect. You'll need Apple to look at it to know one way or the other.
    https://www.apple.com/retail/locator/

  • Comic project part 1:Need to pop. an array with 100 images(001.jpg-100.jpg)

    Hi guys. I am trying to break down my project logically. In the first part, I need to populate an array with 100 images, named 001.jpg through 100.jpg. Any takers?

    Well, I dont think its quite as complicated as it might seem. I dont want to build a comic reader that lets you download new titles. I want to build a page flipper that lets me flip back and forth between 100 images. Back button, forward button, website button in middle on the bottom.
    My goal is to post the completed code online for artists to use. I will see my comic start to finish to make sure it works. Then I will do another and finish the documentation (which goes from signing up as a developer, signing up the itunes connect banking information, and finishes with submitting the app). I want to provide artists with an easily customizable framework upon they can drop their comic images appropriately named into the project folder, and compile.
    Its a glorified slideshow, only one that requires a button push to advance. This way artists can be artists, not programmers. I had swiping as the interface (I have a 90% functional app, but there are changes that need to be made. Not a lot, but enough that I have to keep asking questions) until I realized that the comic can be read one handed, so I am moving to buttons! Doh!
    There wont be any updating. Each issue is self contained.
    Another issue with my sample code: it is set up now where I can name the images "image001.jpg" "image002.jpg" etc. This is a little cumbersome. I am hoping the array method will allow for the code to pull the images, and no one will have to trouble shoot 100 image names to find problems. I hope I am not being unclear in my explanation. Thanks for your kind words. My app works as is. But artists will immediately see the shortcomings. If I can fix only one or 2 small issues, it will be good enough for thousands of artists to pick up and use to sell comics. I have the source code for anyone that wants to take a look.

  • Excise (Dealer)  need to reflect on MIRO screen

    Excise (Dealer)  need to reflect on MIRO screen
    1)     Raise po with tax code z1, condition types JMOP, JEC1, JSEP are made zero(like dummy code)
    2)     Made excise capture and post J1IEX
    3)     Done GRN
    4)     When make MIRO those excise donu2019t reflect in miro screen. Need to get excise  in MIRO which has been captured in j1iex, without change tax code in MIRO screen. Please give solution

    Hi,
    For Dealer or Agency Invoice, you need to create PO with one tax code ( onle VAT)& do Invoice with another tax code (matching perfectly tax amount of excise with VAT) .
    For Example: You have following Case:
    Material Price = 1000/-
    Excise Duty = 103/- (JMOP, JEC1, JSEP )
    Profit margin for Dealer Agency = 400/-
    Total =Rs.1503.00
    VAT @4% = Rs.60.12
    Grand Total = Rs. 1563.12
    Create PO for Dealer or Agency Vendor with Base Price as Rs.1503.00 by selecting tax code(only VAT ) which is having VAT as 4% (Total PO value will be Rs. 1563.12)
    Now go for MIGO, select MRP indicator in miscellaneous tab, Enter Assessable value 1400/- as in Excise tab Item level and enter the excise values JMOP, JEC1 & JSEP manually, check all values & save the document.
    And finally do MIRO ,user proper tax code(matching perfectly tax amount of excise & VAT), checking calculate tax, edit base value as 1400/-enter the amount in header as proposed by the system (Rs. 1563.12), simulate & post the document.
    Regards,
    Biju K

  • Rant: Anyone else find the Lenovo parts site offensively difficult to use and useless?

    I just tried to find a part on the Lenovo website, and found it to be just about as bad an on-line experience as one could imagine.  Without a doubt, the worst example of e-commerce I have ever experienced.  My situation: I know what FRU I need. So first, the site makes it impossible to look up directly. Why?  Why, if I know a part number, does Lenovo make it hard to buy that part directly?
    Ok, you play the cares your dealth.  So I played by their rules.  I tried to look up my model as requested.  First, I filled out the asked-for model number (on http://shop.lenovo.com/SEUILibrary/controller/e/web/LenovoPortal/en_US/catalog.workflow:show-categor... But entering the number doesn't do anything!   Hmmm.  There is also a spot for me to "select my product".  This is  a pull-down list with 100s of items long - literally every Lenovo products ever - that is NOT ORGANIZED IN ANY WAY.  Are these people crazy?  Do they value my time so little, or customer satisfaction so little, that they don't care if their site wastes my time and I can't get the product I need?  Then more fun.  After putting in my model number and actually finding "W530" in a random list of dozens of thinkpad laptops, the site threw an error.  It explained to me that I must have entered a number wrong.  I've managed SW products, and this is unacceptable.  The customer should never, ever, be allowed to enter anything close to something that is not recognized.
    I've gotten good service when I 've called in.  But based on this site alone, I'd never buy another Lenovo product again.  And I'd recommend the same to others.  I'm going on a rant to several forums about this, as well.  Seriously, the worst website I've ever used is ... from a computer company?  Really?  A parts site, which you may be calling under extreme stress, does nothing but add more stress and frustration?
    The W530 may be my last Lenovo.  Which bums me out: I love the machine.
    Smart people will recognize that i wrote this to vent, yes, but also to suggest to Lenovo that they have a significant opportunity for improving a competitive disadvantage and making it an advantage. 
    Two W530s, i7-3820QM, 2.7Ghz, 500Gb Samsung 850 Pro, 1920x1080, nVidia K2000m/100m, Win 7 Pro
    T510, M540, 2.53Ghz, 1Tb hybrid drive, Win 7 Pro
    Two T61ps, T9500/T9300, 2.6GHz, 8Gb RAM, 256Gb Samsung 840 Evo, 1900x1200, nVidia 256Mb FX 570m, Win 7 Pro/Ultimate

    Good day.
    Sorry you're having difficulty.
    Please try your FRU P/N on this site:
    http://www-304.ibm.com/shop/americas/webapp/wcs/stores/servlet/default/PromotionDisplay?promoName=pa... and see if you have better luck.
    Hope this helps a bit.
    Regards.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • Car Adapter Part Number needed for Qosmio G20-110

    Hi,
    I need a car adapter for my G20-110, but can't find any info anywhere on the Toshiba web site.
    The AC power supply has 4 pins, so one of the cheap jobs from Maplins won't fit.
    Any ideas??
    Many Thanks
    Richard

    Hi
    I assume you dont know the Toshiba Options and Accessories website.
    On the Toshiba Europe site you can find this page in the Products:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/home.do?service=EU&from=http%3A//www.toshiba-europe.com/
    On the Toshiba Options and Accessories page you can find supported and compatible additional devices for every Toshiba notebook.
    You should also know that Toshiba authorized service partner in your country sells also the compatible parts.

  • One inch high Lenovo Toolbox icon needs to be hidden or shrunk.

    An update to Lenovo ThinkVantage Toolbox downloaded last night.  I like the Lenovo automatic updates but the new program is stealing lots of valuable space from my taskbar.  I keep the taskbar at the side of my screen and the toolbox icon and all the blank spaces it creates takes as much room as all of my other quick launches combined.  I don’t need to see it but I do want it running.  It is not manageable using properties so I can’t hide it.  The picture below shows the icon occupying the entire space between “Search Desktop” and the battery monitor. (If the picture doesn't paste, its greater than one inch high on a 7.5" high screen.
    Sam
    Solved!
    Go to Solution.

    Sam, welcome to the forum,
    please have a look ath the Toolbox FAQs stickied to the top of this TVT board.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • TOSHIBA C655-S5343 hinge and parts damaged, need help!

    How do I send in my computer to get it repaired? My warranty has not expired and should cover this damage, as it was not accidental and got loose since the purchase of this computer. You see, when I purchased this computer I noticed the right side of it was odd, but nothing happened until months later, when a dead pixel and the left side of the computer got loose. Now, almost 10 months later both sides of the computer are loose and the actual charger adapter (inside computer) loosens and almost falls it unless pressed back in. The computer is almost impossible to close and is a danger to. Is there a way to send this in before my warranty expires? I really need this computer and I am willing to ship it as long as I will get a new model
    Below I have a picture of the damaged parts mentioned above. Please view this! (I do know that regular members are here as well)
    Thank you~
    (If this is in the wrong board, please feel free to move it!)
    Attachments:
    damaged.jpg ‏926 KB

    Alright, I will. I would like to note that this damage is not accidental. Also, I have not taken apart or modified the computer in any way shape, or form and the warranty is still valid.

  • RAM part number needed

    I want to upgrade the RAM in my HP 2000-2d64TU. It currently has 4GB SODIMM Kingston 1600MHz RAM and I want to add another 4GB, I assume I can add another the same as what is already installed. I am having trouble finding the right part number as various RAM suppliers, including Kingston, don't list this HP notebook model.  There seems to be a lot of variation and many types of RAM that have the same specs but different part numbers, so presumably are not exactly the same. I haven't installed RAM before and want to be sure I get the right type. Can anyone help?
    This question was solved.
    View Solution.

    Hi,
    Part number is on page #51 of the first manual on the following link:
       http://support.hp.com/us-en/product/HP-2000-Notebook-PC-series/5375422/model/6622534/manuals
    Yes, to be able to get full benefit of dual channel, you need to use SAME specs of RAM in two slots, even same manufacturer. The above manual also shows you how to add/replace RAM.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Lenovo 3000 K need PCI Simple Communications Contr. Driver update for Windows 7

    PCI simple communications controller on my 3000 K series needs a driver update for the upgrade from Vista to Windows 7. I have a 64 bit system.  I had no errors during my install,and Windows 7 has been working well. What can I do???
    Solved!
    Go to Solution.

    hi ladyr1der,
    Welcome to Lenovo Community Forums!
    Please try installing this driver,
     Intel Management Engine Interface  
    Restart the system after installation and check.
    Hope this helps
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo parts

    where can i get a new USB/Audio connector card for lenovo 3000 n100, type - 0678-04u  fru parts - 41W1316  And how much does it cost.  
    Thanks, Rajesh

    try this : http://www.lenovoservicetraining.com/ion/

  • Lenovo K3 note Need help

    hello i need help i have bought a lenovo k3 note (k50-5) i was trying to root it (by sp tools) but my phone doesnt work now i can not turn it on and i can not enter to recovry mode when i connect it to pc it connect and disconnect directly , is it dead ? please help me 

    Easy enough to download Lenovo Music.

Maybe you are looking for