UK Payroll process

Hi,
This is Preeti. Please guide and send me some documentation on UK Payroll process ASAP.
Regards,
Preeti

Hi
Found these information is posted by V Sharma
You can get basic idea about UK payroll at the following link...
http://www.sap-img.com/human/general-idea-about-uk-payroll.htm
You can get information related to SAP payroll at SAP Help document link below...
http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/PYGB/PYGB.pdf
Also, you can go through the HMRC website which gives information related to the fundamentals of how the GB payroll works, the different deductions, as well as how the absenses like sickness, paternity, maternity, works.
The GB Tax and NI are very important part of GB Payroll, so please check that link also..
http://www.hmrc.gov.uk/index.htm

Similar Messages

  • Tax Calculations in Payroll process

    Hi Experts,
    Can you please let me know how the Tax will calculate while payroll process? Based on what it will get calculate ?
    Thanks
    Murali

    Please read the Wikis, SAP's documentation or search the web for some of the many documents on the Web relating to tax calculation.
    Please note that you should concentrate on a single Country at a time since the Tax Calculation varies according to which country's payroll is being processed.

  • Steps in payroll processing

    Dear All,
    Can anyone tell me the steps involve in payroll processing.
    Regards,
    Kumar

    Maintain control Record in PA03
    run Simulation PC00_M40_CALC_SIMU
    once the pay roll is correct
    Go to PA03 check Relasse for pay roll button
    and go for PC00_M40_CALC
    run live
    and keep ur control record in exit mode and run pay roll psoting to accounts

  • Garnishment Calculations in Payroll Process

    Hi Experts,
    Can you please let me know how the Garnishment will calculate in Payroll process ? Based on what ?
    Thanks
    Murali

    Murali,
    There's a Wiki for US garnishments at the following URL:
    http://wiki.sdn.sap.com/wiki/display/ERPHCM/Garnishment+FAq%27s
    Regards,
    Howard

  • Payroll processing for Mid month Joinees and Separated Employees

    Hi Folks,
    I have the following queries with regard to separation and Joining.
    1.In Legacy , people who are joining after 17 of the current month is getting paid in the next month. Our Payroll Period is from 1 to 31st .  Is it possible to stop Payment for people who are joining after 17th of the current month and Pay them in the subsequent month.
    2.In legacy usually the Settlement happens in the subsequent month of Separation.  Say if a employee resigns on April, he will get his full and Final settlement in the month of May or june. For a separated employee is it possible to make payment in the subsequent months.
    Rgds,
    Sekar.

    For point no 1, yes its possibel. and there are multiplt ways to that. like lock the employee in payroll status infotype, or write a rule where in check the DOJ of the employee, and if employee joins after 17th, reject the payroll for that employee
    For point no 2, yes you can process later also, but ensure that payroll gets processes in that financial year itself.

  • Balancing field "Profit Center" error during Payroll Processing

    Hi,
    Our Payroll team is processing salary however we are getting following error:
    *+Balancing field "Profit Center" in line item 008 not filled
    Message no. GLT2201
    Diagnosis
    The field Profit Center marked as balancing is not filled with any value in line item 008, even after document splitting.+*
    Scenario is - we are trying to process salary of an employee who got transferred from one Cost Center to another Cost Center during the month. Entry that's being generated (however could not get posted) is:
    1. SALARY-STAFF                    CC01
    2. SALARY-STAFF                    CC02
    3. DA-STAFF                              CC01
    4. DA-STAFF                              CC02
    5. OTHER ALLOWNCE-STAFF   CC01
    6. OTHER ALLOWNCE-STAFF   CC02
    7. T/BENEFIT PF BRD CNT          CC01
    8. NET SALARY PAYABLE        -
    System is splitting all the expense components however it's not able to split NET SALARY PAYABLE account.
    We have checked following things:
    - NET SAL.PAYABLE GL account is included in 'Classify GL Account for Doc Splitting' with Category 0100 (Balance Sheet Account)
    - Document Type AB is also included in 'Classify Document Types for Doc Splitting'
    - New GL is activated
    - Document Splitting Characteristic for General Ledger are Profit Center (Mandatory) & Segment (Mandatory)
    Could someone please advice how can we fix the issue?
    Thanks,
    SS

    Hi,
    Double click on NET SALARY PAYABLE GL account  008 line item and click on more data and give me profit center and save
    Thanks,
    Raviteja

  • Wage types in Payroll Process getting doubled.

    Hi,
    experts i have an issue while running Payroll.
    An employee is having a change in shift schedules in mid of the month and while running the payroll the salary is getting doubled with same wage types twice as attached.
    Here the payable month days are fixed for a group of employees i.e.26 days a month. This days are given in IT 15 as no of days and this no is converted to RTE in payroll.
    in  (Indian Payroll Schema) INBD sub schema Function WPBP is creating Splits as per the master data change in IT 7 and in payroll iam getting salary doubled can anything be done to eliminate / delete the splits 01 or 02 as per the requirement to calc salary only on the required split.

    I think you must have written a rule to calculate the amount for 26 days use operation ELIMI * in the rule then check it once eliminated again you wanted the amount with splits you can use operation WPALL.
    Use operation ELIMI * as first line of rule.
    Regards
    Venkatesh

  • How to know if an element is processed in any payroll process

    Hi All,
    I have a requirement where I should not process a particular element if it was processed anytime in the history.
    how do I frame a query to get the details of any trace of this element being processed.
    Thanks

    Thanks, Mohammed, For your reply. Would appreciate if you can suggest if some inbuilt package is available to retrieve the payvalue for an element for any given period..
    Thanks again for your time!!

  • Want to check whether cost center exists or not during payroll process ?

    Dear All,
    Requirement is to throw an error for an employee during payroll run if the cost center does not exist.
    I guess this may be achieved by PCR only.  There is an operation OUTWPCOSTC which can help.
    Issue is that there are parameters like VALEN and VAOFF which need to be taken care of while using OUTWPCOSTC.
    Also, when cost center is not assigned, its value in WPBP is BLANK.  How to query a BLANK value in PCRs?
    Can any help on this with an complete example?
    Regards,
    Ankit

    Hi Ankit,
    Try with PCR
    VALEN 1
    OUTWPCOSTC
    Update the PCR in sub schema COPY  Z002                  Edit basic data
    000040 WPBP                        Read Work Center/Basic Pay Data
    000050 GON                         Continue if Data is Complete
    000060 ACTIO ZQ14 GEN              Check if cost centre exits
    000070 BLOCK END                   Edit basic data
    This will help you while runing the Payroll.
    Thanks & Regards
    Vikram Mali

  • Retro payroll processing for org unit cost centre changes

    Dear All,
    We have created some new cost centres and assigned  it to relevant org units . when we run payroll , retro run is happening from the period we changed the cost center and assigned the new cost centre to the org units . please suggest a solution
    regards
    Tressya

    Hi Tressya,
    changes in IT0003 won't affect retro calculation, since you have already created result periods for retro calculation. The payroll programm will detect this and allways will repeat the retro unless you delete those results first.
    Try TR PU01 during correction - then clear Earl.pers. RA date  by PU03 (PA30 won't work here)
    After that you hou'll have to repeat payroll run for effected employees to get new results for actual period only.
    regards
    J.

  • Can any body please explain the hr payroll process  in detail

    Hi Experts,
                      I am newbie to HR abap.Can any body give their valuable experience regarding payroll proces in hr.
    Thanks and Regards,
    Sravanthi.

    Check this out,
    payroll
    Re: payroll material
    Hope this will help.
    ashish

  • Hiring and payroll process

    Staff A joined A company in 1 April 2011 but later transfered to B company.  Would like to perform the hiring process for A to take effect in B company with the commencement date as of 1 April 2011 without any retro effect. How do we handle the tax and EPF?  What is the process?
    Regards
    KMF

    Org reassignment is possible on the same day.
    But you can try out on next day, tax will be deducted to the TAN number where employee was on payment date. Hence no impact on tax.
    EPF will also not be impacted if both company has the same trust. If they have seperate trust then it will be splitted. This you can control by changing IT0587 to the latest trust effective from 01.01.2011. In this it will not create any issue.
    Before going ahead test it properly.

  • ORACLE error 1012 in FDPCLS when running payroll processes

    Hi, All -
    **Oracle Database 10.2.0.5.0 on RHEL5 (Single Node)**
    **Oracle ERP Apps 11.5.10.2 on RHEL5 (Single Node)**
    I have recently cloned my existing DEV environment from PROD. The database is now running on a NEW server where as the APPS server is still the same.
    I found *Metalink node [ID 277148.1]* on this issue and it suggests to review the tnsnames settings. I have already verified that the tnsnames.ora file contains the right information and reflects the correct db server name.
    Please let me know where else to check for an old database server entry that I should correct ... Thanks!
    **ORACLE error 1012 in FDPCLS**
    **Cause: FDPCLS failed due to ORA-01012: not logged on**
    *The SQL statement being executed at the time of the error was: and was executed from the file.*
    */erp1/appsvr/erpappl/pay/11.5.0/bin/PYUGEN*
    *Program exited with status -l*

    Please bounce the database and the database listener and try then.
    Can you find any errors in the database log file?
    */erp1/appsvr/erpappl/pay/11.5.0/bin/PYUGEN*Relink this executable file via adadmin or manually and try again.
    Thanks,
    Hussein

  • PAYROLL ARCHIVE PROCESS CAN NOT SEEN ON THE REQUEST SET FOR SUBMIT

    Dear all
    kindly please i need your help.
    i was on the payroll process running.
    i have run payroll run--->PrePayment--->Payroll Archiver not found.
    Kindly please suggest any......what should i done.

    It's not possible with this setup. You have connected the E3000 LAN-LAN. With this setup you cannot set a gateway address on the E3000. Thus all it knows about is the connected LAN. Nothing else. You cannot access the E3000 from anywhere but your LAN subnet 192.168.0.*.

  • Payroll run process is not showing any results

    We have Oracle Applications 11.5.10.2 with vision demo database with US legislation. After completing all the required setups for Payroll and defining a new payroll and all the requirements for the payroll, when we submit the request Payroll Process we are not able to see any results, even though the request has completed successfully without any errors. We are not able to see any salary details in Statement of Earnings, Payslip etc. And data is not displayed even if we use Quickpay.
    What could be the problem?

    You can post it in HRMS forum, they might be able to help
    Human Resource Management (HRMS)

Maybe you are looking for