UltraSearch - Numbers of document discovered, fetched and indexed
I am using US 1.0.3.
- I have a table data source mapped to a table with the following characteristics:
> PK is a composite of three columns
> table has a total of 970 rows
> the column TITLE which is of varchar2 is specified as the content column
> Of the 971 rows, 82 rows have NULL in TITLE column.
> Of the 971 rows, only 196 rows have unique TITLE.
> There is no attribute mapping
- Here is the crawler summary:
Document discovered: 381
Document fetched: 381
Document indexed: 196
The rest are zeros.
My questions are:
(1) It seems US only indexes rows with unique value which explains why only 196 rows/documents are indexed. That is, rows with duplicate TITLE are not indexed. It seems to make sense. Is that correct?
(2) But why only 381 documents/rows are discovered and fetched? I would think it would discovered all the rows with NON-NULL value in the TITLE column: 889 (i.e. 971 82).
(3) In summary, how does US determine what rows to fetch and index?
Thanks!
C Cheung
Hi nyzonegirl,
Welcome to Numbers discussions.
Yvan is correct; nothing neither in iWork nor any Mac application will remove MS Office—Excel. If you were using Numbers there is a 30 trial for it, after 30 days it stops working or one purchases it. So it seems that the Excel work sheet you were using may have opened in Numbers not your Excel—a file association thingy.
Find on your HDD the Excel .XLS file, click on it once to highlight it. Now click File > Get Info, down the list it will read Open with:, change it to Excel (it may read Numbers). You'll have the choice to have all like files open in Excel as well.
Yes you're correct, Windows users won't be able to open Numbers files so if you decide to purchase iWork you'll need to do as Yvan suggested, Export to Excel.
As the need arises I use Excel, however, for my personal use 100% of the time I use Numbers. When I know Functions are the same I'll use Numbers then Export to Excel for Windows users.
Hope this helps you. Do let us know the outcome.
Sincerely,
RicD
Similar Messages
-
Scanning and indexing option not appear in Oracle Document capture
Hi
I installed Oracle document capture 10.1.3.5.1.
when i opened this document capture scanning and indexing option are not presented.
i am using windows 64 bit operating system.
please find screenshot for the same
[http://oraclebpm.com/webcenter/scanning_indexing.png]Thank you Ryan for your reply. The problem was resolved.
First I downloaded document capture s/w from oracle.com site,I am not getting the option when I download s/w from this site.
Later i downloaded it from https://edelivery.oracle.com/ site. Now I am getting the options now.
-vishnu -
Hello; I am using Numbers '09 version 2.1 (436). I tried unsuccessfully to upgrade at one point. Now can't open existing documents. Message "The index.xml file is missing". How can I correct this ?
Thank you
TomI't not iWeb that got damaged but the domain file. The index.xml file is inside the domain.sites file that's located in your Users/Home/Library/Application Support/iWeb folder. Do you have a backup of that file you can revert to? If so then do it. Otherwise a long shot but try the following:
close iWeb.
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home/Library/Preferences folder.
go to your Home/Library/Caches/com.apple.iWeb folder and delete its contents.
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT -
I am using a program that opens a document in adobe and I need to save it back in the program. I get this message: this document is trying to connet to: fill://index.cfm?event=vendorsonly.submiteventform. Help
Have you contacted the people who make the program? It sounds like something special from that program.
-
I just updated my MAC operating system and when I went to open a recent document in numbers, the document that opened had none of my data and was formatted differently. Can I get my document with all my information back?
I suggest the easy stuff first:
1) quite Numbers and restart Numbers
2) reboot the computer
After that try opening the same document in another user space -
I have a A4 document (569 pages) and within that A4 there are few A3's. Is there a way to isolate the A3's or find out what page numbers are A3's instead of scrolling through all the 569 pages???
thank you for the info... however I'm done buying pdf readers.... I've got three now, that should suffice.
I don't think there's a problem such as you mentioned because the pages are all similar : text and drawings. Some of the pages with drawings work, other similar pages don't.
I converted with Calibre to epub format and this seems to work !!!
So good so far...
Now I need to find a conversion to pdf to allow me to use goodreader or iannotate.
Basically... the text is ok, because a conversion allows reading. So a shortcoming by Apple in my opinion. Again, all pdf's should be readable on such an expensive tool !!! -
Why did I lose my old documents on Pages and Numbers when I updated my computer. I didnt need a new version. I have been using the same hand outs for 8 years. Some I can see, some say you cant open unless you buy numbers.....again
The old version of iWork should still be on your computer.
Check in Applications (Command-Shift-A) for an iWork '09 folder. -
Why does consecutive figure numbering break when using anchored and in-lin objects
I have an ID CC2014 document that contains graphics with figure numbers associated (using a defined paragraph style - numbered list - continue from previous) and when I place these into the flow of the document with a wrap associated to them they maintain the consecutive numbering that was set up in the figure style sheet. However when a table or graphic is placed in-line with the text (anchored graphic box or inserted table) the consecutive figure numbering doesn't continue, it restarts as #1. The next anchored or inserted item then sees this figure number and follows as if the list was restarted. What is up?
I have found that if all items are used as wrap graphics or separate text/table boxes the figure numbering functions as it should.
Is this a glitch?I had that happen a month or so ago. What I discovered was there was another numbered list setting in the anchored frames. That's what was restarting the numbers. No glitch. User error.
Sent from my iPhone
So pardon the brevi -
Numbers can't open file says index.xmlfile missing
Was working on my files this morning. Now I cannot open them it says the documents are invalid and that the index.xml file is missing. I need to retrieve these documents.
Hi segars,
Adding to Sparkleberry's reply,
Wayne Contello has written a User Tip for working with the old and new versions of iWork.
Need newer version of Numbers to open file
The trick is to drag icons for both versions to your Dock. Right click or control click on each and Options > Keep in Dock. That puts you in charge of which version you launch.
Here is a screen shot of both Numbers icons on my Dock.
Numbers 2.3 (Numbers '09) on the left with a three column graph.
Numbers 3.5.2 on the right with a four column graph.
Both versions will run happily together. Just be sure which version is opening your document.
Instead of double clicking the document, run whichever version of Numbers/Pages/Keynote suits and use File > Open.
Regards,
Ian. -
I have been trying to save a document in illustrator and every time I try to, a dialog box pops up and says the following- Can't save the illustration. You do not have enough access privileges. id: -5000....This has been happening ever since I switched to CC and whenever I try to save something in indesign, I get a dialog box that says that my file is corrupt. How do I fix this? I cannot get any work done !!!
You should ask in Illustrator
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll -
how can i open a PDF bank statement in "numbers" so that the rows and columns contain properly aligned data from statement?
Numbers can store pdfs pages or clippings but does not directly open pdf files. To get the bank statement into Numbers as a table I would open the bank statment in Preview (or Skim) or some pdf viewer.
Then hold the option key while selecting a column of data.
Then copy
Then switch to numbers and paste the column into a table
Then repeat for the other columns in the pdf document
It would be easier (in my opinion) to download the QFX or CSV version from your bank -
Performance Degradation - High fetches and Prses
Hello,
My analysis on a particular job trace file drew my attention towards:
1) High rate of Parses instead of Bind variables usage.
2) High fetches and poor number/ low number of rows being processed
Please let me kno as to how the performance degradation can be minimised, Perhaps the high number of SQL* Net Client wait events may be due to multiple fetches and transactions with the client.
EXPLAIN PLAN FOR SELECT /*+ FIRST_ROWS (1) */ * FROM SAPNXP.INOB
WHERE MANDT = :A0
AND KLART = :A1
AND OBTAB = :A2
AND OBJEK LIKE :A3 AND ROWNUM <= :A4;
call count cpu elapsed disk query current rows
Parse 119 0.00 0.00 0 0 0 0
Execute 239 0.16 0.13 0 0 0 0
Fetch 239 2069.31 2127.88 0 13738804 0 0
total 597 2069.47 2128.01 0 13738804 0 0
PLAN_TABLE_OUTPUT
Plan hash value: 1235313998
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 2 | 268 | 1 (0)| 00:00:01 |
|* 1 | COUNT STOPKEY | | | | | |
|* 2 | TABLE ACCESS BY INDEX ROWID| INOB | 2 | 268 | 1 (0)| 00:00:01 |
|* 3 | INDEX SKIP SCAN | INOB~2 | 7514 | | 1 (0)| 00:00:01 |
Predicate Information (identified by operation id):
1 - filter(ROWNUM<=TO_NUMBER(:A4))
2 - filter("OBJEK" LIKE :A3 AND "KLART"=:A1)
3 - access("MANDT"=:A0 AND "OBTAB"=:A2)
filter("OBTAB"=:A2)
18 rows selected.
SQL> SELECT INDEX_NAME,TABLE_NAME,COLUMN_NAME FROM DBA_IND_COLUMNS WHERE INDEX_OWNER='SAPNXP' AND INDEX_NAME='INOB~2';
INDEX_NAME TABLE_NAME COLUMN_NAME
INOB~2 INOB MANDT
INOB~2 INOB CLINT
INOB~2 INOB OBTAB
Is it possible to Maximise the rows/fetch
call count cpu elapsed disk query current rows
Parse 163 0.03 0.00 0 0 0 0
Execute 163 0.01 0.03 0 0 0 0
Fetch 174899 55.26 59.14 0 1387649 0 4718932
total 175225 55.30 59.19 0 1387649 0 4718932
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 27
Rows Row Source Operation
28952 TABLE ACCESS BY INDEX ROWID EDIDC (cr=8505 pr=0 pw=0 time=202797 us)
28952 INDEX RANGE SCAN EDIDC~1 (cr=1457 pr=0 pw=0 time=29112 us)(object id 202995)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
SQL*Net message to client 174899 0.00 0.16
SQL*Net more data to client 155767 0.01 5.69
SQL*Net message from client 174899 0.11 208.21
latch: cache buffers chains 2 0.00 0.00
latch free 4 0.00 0.00
********************************************************************************user4566776 wrote:
My analysis on a particular job trace file drew my attention towards:
1) High rate of Parses instead of Bind variables usage.
But if you look at the text you are using bind variables.
The first query is executed 239 times - which matches the 239 fetches. You cut off some of the useful information from the tkprof output, but the figures show that you're executing more than once per parse call. The time is CPU time spent using a bad execution plan to find no data -- this looks like a bad choice of index, possibly a side effect of the first_rows(1) hint.
2) High fetches and poor number/ low number of rows being processedThe second query is doing a lot of fetches because in 163 executions it is fetching 4.7 million rows at roughly 25 rows per fetch. You might improve performance a little by increasing the array fetch size - but probably not by more than a factor of 2.
You'll notice that even though you record 163 parse calls for the second statement the number of " Misses in library cache during parse" is zero - so the parse calls are pretty irrelevant, the cursor is being re-used.
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk
To post code, statspack/AWR report, execution plans or trace files, start and end the section with the tag {noformat}{noformat} (lowercase, curly brackets, no spaces) so that the text appears in fixed format.
"Science is more than a body of knowledge; it is a way of thinking"
Carl Sagan -
When I follow any kind of links or try to open something in another window or new tab, the browser first shows the white page with text "the document has moved", and then moves to advertisement page of some sort. Usually in the small box where the page description is it says "Jump". I don't know how to disable it, it is really irritating.
Sounds like Malware.
Install, update, and run these programs in this order. '''''(Not all programs detect the same Malware.)''''' They are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have.<br />
''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] <br />
SuperAntispyware - [http://www.superantispyware.com/] <br />
AdAware - [http://www.lavasoftusa.com/software/adaware/] <br />
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] <br />
Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx]
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: <br />
[http://www.spywarewarrior.com/index.php] <br />
[http://forum.aumha.org/] <br />
[http://www.spywareinfoforum.com/] <br />
[http://bleepingcomputer.com] -
'unable to connect' and index.php
Hi.
I am developing a Web Site and index.php is my point of entry.
Document Root Library/WebServer/Documents
so my path is: Library/WebServer/Documents/dwwdSite
httpd.conf file is modified to add index.php and have it listed first.
<IfModule dir_module>
DirectoryIndex index.php index.html
<IfModule>
Troubleshooting:
I was using Netbeans IDE and when I ran index.php it opened in the browser.
When I launched 'any' of my index.php files from Netbeans IDE, they opened correctly in the brower
I am NOW using DreamweaverCC and when I run the index.php Error Message ' Unable to Connect'.
For the last 2 days I have been working on this and I am completely stuck.
This morning I thought of another way to test the 'unable to connect' error.
I decided to copy this same file into Netbeans IDE and I NOW get the same Error Message ' Unable to Connect'
when running index.php from Netbeans.
Somehow, my settings are not correctly configured anymore.
Here are my screenshots from Dreamweaver > manage sites.
I believe that this is a rather simple fix that I am somehow not seeing.
Maybe some can spot some mistake.
I appreciate your help and explanation.Hi Sudarshan.
You have been very kind and very clear in your explanation.
One of the very best that I have ever communicated with on this forum !
I have checked many, many things.
I wanted to make certain that I killed apache and restarted it.
I do not think it is RUNNING at all.
1.
myNameMacBookPro:~ myName$ pwd
/Users/myName
2.
myNameMacBookPro:~ myName$ ps -ax | grep http
1892 ttys000 0:00.00 grep http
3.
myNameMacBookPro: myName$ hostname
local
4.
myNameMacBookPro:etc myName$ cd apache2
reginaMacBookPro:apache2 myName$ ls
extra httpd.conf.pre-update mime.types other
httpd.conf magic original users
5.
myNameMacBookPro:apache2 myName$ sudo nano httpd.conf
myNameMacBookPro:apache2 myName$ sudo apachectl -k restart
Syntax error on line 1 of /private/etc/apache2/users/myNameBU.conf:
Invalid command '{\\rtf1\\ansi\\ansicpg1252\\cocoartf1187\\cocoasubrtf370', perhaps misspelled or defined by a module not included in the server configuration
httpd not running, trying to start
myNameMacBookPro:apache2 myName$
6.
The above code may be a hint at part of the problem.
I created myNameBU.conf as a backup when I was editing the file.
QUESTION. Why is /private/etc/apache2/users/myNameBU.conf:
being referenced above ?
7.
I scanned my ports from preferences and found these two which I believe are what you stated they should be.
port 80 is html
port 8080 is html-alt
8.
I have modified this line and tried it both ways restarting apachectl each time.
AllowOverride None
AllowOverride All
9.
And here is a part of my httpd.conf.
excerpts.
httpd.conf
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User _www
Group _www
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/Library/WebServer/Documents"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
10.
I took a look at this too.
usr/bin
#path to httpd binary including options if necessary
HTTPD = "usr/sgin/httpd"
# pick up any environmental variables if test - f /usr/sbin/envvars; then ./usr/sbin/envvars
fi
STATUSURL = "http://localhost:80/server-status
11.
Just a reminder.
I started writing .php scripts with Netbeans IDE.
The programs ran: I got output in the brower. Things worked just fine !
I started writing .php scripts with DreamweaverCC.
The programs NEVER ran.
I have always gotten 'Unable to Connect"
Firefox/Safari can't establish a connection to the server at localhost.'
12.
QUESTION.
At one point I was on the phone with a member of the Adobe Technical Support Team.
They connect to my desktop (only) remotely. I am very cautious about this.
Could something have been inadvertently changed when they did this ?
They do need to connect through a PORT - yes ?
This is very frustrating and I am loosing days of work.
I want to get back to Web Development
I love Adobe products but this should not be such a huge obstacle.
When I called Technical support (after much troubleshooting individually and on this forum)
the fellow told me that the ONLY support FTP - not LOCALHOST.
This makes no sense. People develop 'locally' then put it ftp it in the production stage.
Again, I appreciate your assistance. -
'unable to connect' and 'localhost' and index.php and dreamweaverCC
Hi.
I am developing a Web Site and index.php is my point of entry.
Document Root Library/WebServer/Documents
so my path is: Library/WebServer/Documents/dwwdSite
httpd.conf file is modified to add index.php and have it listed first.
<IfModule dir_module>
DirectoryIndex index.php index.html
<IfModule>
Troubleshooting:
I was using Netbeans IDE and when I ran index.php it opened in the browser.
When I launched 'any' of my index.php files from Netbeans IDE, they opened correctly in the brower
I am now using DreamweaverCC and when I run the index.php Error Message ' Unable to Connect'.
For the last 2 days I have been working on this and I am completely stuck.
This morning I thought of another way to test the 'unable to connect' error.
I decided to copy this same file into Netbeans IDE and I NOW get the same Error Message ' Unable to Connect'
when running index.php from Netbeans.
Somehow, my settings are not correctly configured anymore.
Here are my screenshots from Dreamweaver > manage sites.
I believe that this is a rather simple fix that I am somehow not seeing.
Maybe some can spot some mistake.
I appreciate your help and explanation.Site window settings.
Site Name: dwwdSite
Local site folder: /Library/WebServer/Documents/dwwdSite
Server window settings.
Server Name: testing Server
Address: Macintosh HD/Library/WebServer/Documents/dwwdSite
Connect using: Local/network
Testing: yes (checked)
Server folder: /Library/WebServer/Documents/dwwdSite
(I also tried this: Server folder: /Library/WebServer/Documents)
Web URL: http://www.localhost/dwwdSite
Server Advanced tab: (within server window settings)
Testing server: PHP MySQL
Advanced Settings window.
Local info: Web URL: http://www.localhost/dwwdSite
Enable cache: yes (checked)
Maybe you are looking for
-
I already tried the tips given by the Document ID: 1VNE8JR5, but without any success. When I don't provide a printer name (or path), the Report is printed on the default printer. This printing works fine under Win98, but it doesn't work on WinNT or W
-
I am using 6023E DAQ card to collect the signals, such as AE, Force, Torque from the machine. I want to collect only some part of signal for example between start triger and stop trigger. I'd like to know how I can creat those triggers in LabView fro
-
Taking Long Time To Show Printer Selection Window
Hi experts, When users are taking printout through SAP,it's taking long time to show printer selection window(Local Printer Selection Windows) present i am using sap ehp7 on sybase in windows. Thanks in advance..
-
I want to turn a piece of art into a giclee printing, but am having problems getting the correct colors in the preview (is the preview incorrect?) and the format is wrong I think...When I uploaded the file to the printing service site, they wanted a
-
How to find location of an album
I created an album selecting pictures from 3 separate events. I'd like to now upload that album to an on-line storage website - fotki.com (similar to Snapfish). They have a plug-in to select location of my pictures. I want to be able to select the lo