UME Configuration - Abap System as userstore, can it be reversed?

Hi,
according to SAP note: 718383 (Supported UME datasources and change options), you cannot change the datasource once you start to use dataSourceConfiguration_abap.xml (Abap system) as datasource.
Is this correctly understood? Does this mean I could never change back to i.e. "Database only" or any LDAP alternative?
I would thus have to do a fresh portal installation?
Best Regards
Olof

HI,
Once I planned to do the same, chnaging my Data Source from ABAP, but dropped my plan after analysis.
Please check this link,
[http://help.sap.com/saphelp_nw04s/helpdata/en/45/af3ac012d32e78e10000000a155369/frameset.htm]
also this the following link might be useful,
[http://help.sap.com/saphelp_nw04s/helpdata/en/b7/14d43f2dd44821e10000000a1550b0/frameset.htm]
Thanks,
Vamshi

Similar Messages

UME change from ABAP to other ABAP system

>Hi, 
 
I have a java-only system names QAJ which is mapped to our Solution Manager system for UME (please don't ask why!). 
 
I want to change UME to ABAP system QAS. 
 
So, I go to NWA -> Administration -> Identity Management . 
 
Under the ABAP system tab, I change necessary info such as servername, user SAPJSF, password and client to my QAS system. I then click on TEST connection which works well. I am asked to restart cluster to activate changes. 
 
So, I restart QAJ... and it fails to start. in file std_server.out 
 
Service com.sap.security.core.ume.service started. (32515 ms). 
Sep 1, 2009 9:21:55 AM ...xt.<init>(UserContextSpi, Properties) [SAPEngine_System_Thread[impl:5]_23] Fatal: Can not instantiate UserContext with given properties. 
service security ================= ERROR ================= 
Core service security failed. J2EE Engine cannot be started. 
com.sap.engine.services.security.exceptions.SecurityServiceException: Unexpected exception: 
 at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:194) 
 at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214) 
 at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144) 
 at com.sap.engine.frame.core.thread.Task.run(Task.java:64) 
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:83) 
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:156) 
Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: No active userstore is set. 
 at com.sap.engine.services.security.server.UserStoreFactoryImpl.getActiveUserStore(UserStoreFactoryImpl.java:80) 
 at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.update(LoginModuleHelperImpl.java:405) 
 at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.<init>(LoginModuleHelperImpl.java:84) 
 at com.sap.engine.services.security.server.SecurityContextImpl.<init>(SecurityContextImpl.java:58) 
 at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:147) 
 ... 5 more 
 
 
com.sap.engine.services.security.exceptions.SecurityServiceException: Unexpected exception: 
 at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:194) 
 at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214) 
 at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144) 
 at com.sap.engine.frame.core.thread.Task.run(Task.java:64) 
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:83) 
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:156) 
Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: No active userstore is set. 
 at com.sap.engine.services.security.server.UserStoreFactoryImpl.getActiveUserStore(UserStoreFactoryImpl.java:80) 
 at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.update(LoginModuleHelperImpl.java:405) 
 at com.sap.engine.services.security.server.jaas.LoginModuleHelperImpl.<init>(LoginModuleHelperImpl.java:84) 
 at com.sap.engine.services.security.server.SecurityContextImpl.<init>(SecurityContextImpl.java:58) 
 at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:147) 
 ... 5 more 
 
[Framework -> criticalShutdown] Core service security failed. J2EE Engine cannot be started. 
Sep 1, 2009 9:21:55 AM com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_23] Fatal: Critical shutdown was invoked. Reason is: Core service security failed. J2EE Engine cannot be started. 
 
 
 
Ok, so something is wrong in my entries even if test connection works fine. 
 
Becasue JAVA stack does not start anymore, I need to go to configtool. Everything that I changed is active, I can see everything. Still, I do not know which parameters is causing all this. 
 
Anybody know where to go from here? 
 
Thanks! 

I found the problem.
in configtool, in parameter ume.login.guest_user.uniqueids, value was set to J2EE_GST_QAJ.
user J2EE_GST_QAJ did not exist in ABAP system QAS. I created it as a service user and gave it role SAP_J2EE_GUEST.
I also increased values for ume.r3.connection..master.poolmaxsize and ume.r3.connection..master.poolmaxwait
after Java stack restart, system works fine again.
thanks to everyone that took time to read my question. Hopefully, someone with the same problem will find a possible solution.

How can I login ABAP System of the EP System?

Hi experts.
I installed EP system, which from "as ABAP" and "as java","as EP" composition.
i can use j2ee_admin normal logon EP (http://myportal:<port>/irj/portal),But i don't create new user,
ume.persistence.data_source_configuration = dataSourceConfiguration_abap.xml
i can't contact ABAP System by SAPGUI which Application Server: myportal<IP>,SYSID:000
SYS number: 01
i want to logon on the ABAP System of the EP,How should I do?
Best Regards.
dingding lee

Hi Karl Rigen ,
yes,i just installed EP component :"as ABAP" and "as java","as EP".
j2ee_admin login ep in screen shown,
System Administrator->System configure -> UME configure
SAP system
UID:SAPJSF
Specific application server connectivity
Application server:localhost
i click test connect display "successful".
need i installed other ABAP systems ?

Portal UME in ABAP asking user mapping???

Hi all,
I've decided to configure portal UME beeing the ABAP UME in backend system. I Can create users in portal and SU01 and i can logon in both systems with the same user. Now i've a system to connect the MSS/ESS iviews and portal asks me for user credentials in R/3, why ? It is the same user !! Have I to configure anything more?
Thanks for replys,
Best Regards,
Pedro Rodrigues.

Hi Pedro,
To my knowledge ESS/MSS iViews are connecting ICM server on ABAP side and, thus, BSP iViews (at least, some of them). To avoid requests for user credentials from ICM server you need to configure SSo between your J2EE (where Portal is installed) and ABAP systems.
Here is the link that might be helpful for you:
http://help.sap.com/saphelp_erp2005/helpdata/en/89/6eb8e7af2f11d5993700508b6b8b11/frameset.htm
Also you can search in the SDN Weblogs for steps on how to configure SSO.
Regards,
Mike

How to point UME to ABAP..

Hi friends,
I have configured UME to ABAP system....UME has to point to ABAP.
I have done some steps through visual adminsitrator->UME Provider
Under UME provider i have provided certain details like abap hostname, abap client number, sapjsf user.
in ABAP Side, i have created roles SAP_BC_JSF_COMMUNICATION and SAP_J2EE_ADMIN for sapjsf user and profiles SAP_ALL and SAP_NEW.
Apart from these what else has to be done in both java and abap side? I have gone through many forums but i dint find exact stuff that i needed.
If everything is done, how to check whether UME has pointed to ABAP?
please suggest.
Thanks,
KK

Hello,
My advice is to first check for the documentation instead search in forums:
http://help.sap.com/saphelp_nw70/helpdata/en/9e/fdcf3d4f902d10e10000000a114084/frameset.htm
If you've performed the steps as described there, your UME is correctly pointing to the ABAP client.
Cheers,
Diego.

User mapping certificate in UME (J2EE) with ABAP system as Backend (SNC)

I hope someone can help me with the user mapping concept (X.509 V3 certificates) for both "worlds" (ABAP and JAVA Stack).
I know how to install and configure certificate based (X.509) login to SAP ABAP and SAP JAVA (J2EE) Stack (--> enable encryption for communication and Single Sign On).
Situation:
We have a ready installed and configured X.509 certificate authentication environment for the ABAP world (between SAP GUI and SAP Server System)
and the user mapping was configured in the ABAP System (SU01). As the users are using certificates, the passwords are deactivated on the ABAP System.
Now if you want to integrate a JAVA (J2EE) Sytem and you want to configure the UME to the ABAP System (as Backend), you have an administrative effort problem with the user mapping (X.509) in the UME configuration.
1.) It is possible to assign manually the user public key to every user --> But to much effort
2.) As the user does not have a password (deactivated in the ABAP system), the way to combine the automatic mapping with a user login does not work.
3.) In the distinguished name of the user certificate there is no information about the SAP username itself
--> you are not able to use any information of the DN to bind a user in the Login Module configuration.
Now my question:
Is it possible to use the sncname information from the ABAP System (still configured and available) for the UME configuration?
As i know, it is possible to write an own Login Module. Does anybody has a customized Login module for this issue?
At the end the best solution would be to enable the same user mapping mechanism on the JAVA world as on the ABAP world. --> Mapping the Distinguished Name to the SAP User

We have developed a login module which is working with Kerberos auth, not x.509 auth, but still solves a very similar problem to the problem you are describing. As you know, when SNC is used to logon to ABAP stack, the SNC name of the user is mapped onto a SAP user via entries in the USRACL table. Our mapping login module takes the authenticated user principal name from the shared state and uses this to lookup the entry in USRACL table on ABAP stack, and from this it will know which SAP user to use, and can update shared state with this info so that CreateTicketLoginModule will created an SSO2 ticekt for the mapped SAP user id.
This means that mapping of users externally authetnicated identity onto SAP user/client can be managed in one place, e.g in ABAP stack using USRACL table entires and su01 t-code etc.
I know it is not exactly what you wanted, since you are looking to use x.509 certifiates instead of Kerberos authentication, but I thought it was worth sharing so that you know the concept has already been implemeneted many times. Many of our customers use this login module when they have our product, for the same reasons that you have stated.
Thanks,
Tim

LDAP UME for ABAP + JAVA SYSTEM

Hi,
I am using NW 7 SP 15 with both ABAP + JAVA stack. The UME is set to ABAP by default during installation.
Can we change that to LDAP datasource?
Under System Configuration -> UME Configuration -> Data Sources (TAB) -> in Data Source dropdown box -> there is only ONE option available "ABAP SYSTEM" and no other option is present.
Any suggestion?
Regards
Deb

Ups! Obviously a later change from ABAP to some other UME indeed is not supported by SAP. But this means not, that you cannot use LDAP or JAVA from the very beginning.
Did you not have the option to choose another UME data source for the Java Add-In during the installation process? (this may make sense, because the installation sequence for double stacks is always 1. ABAP stack 2. Java stack).
If not, then indeed LDAP as the primary UME data source is not supported for double stack installations.
If yes, you only have the chance to re-install your system.
In every case you can install 2 separate instances and connect them later. 1 ABAP instance with UME of course ABAP and 1 Java instance with UME LDAP or Java DB.
But before doing that and if I were you I would open a CSN at SMP and ask the software vendor ...
Regards,
Volker

My SLD is configured in SOLMAN sys, How can I connect it with SAP PI system

Dear Friends
My Basis has configured SLD in Solman, Now I cant use SXMB_IFR tcode in my PI that suggest me some error. saying "error in connection cant read secure connection config" or something like that. Plus SLDCHECK tcode is also not happy. it suggest that RFC connections are missing.
It is clear that My SLD is not linked with PI system. something is missing in technical system part and its not even bridged. but since I am not a BASIS guy I dont know How can I configure it. Not even my BASIS guy understands that I need to bring SOLMAN SLD to PI.
Can anyone suggests me How can I bring my SOLMAN SLD to PI system so I can run SXMB_IFR tcode ? I need to create some rfc connection like LCRSAPRFC and SAPSLDAPI but dont know the connection type like t, or something else. Please englight me by suggesting How can I bring my SOLMAN SLD to PI.
One intresting observation is when I try to run my SLD over url using PI system as host it comes but says SLD is not configured properly and when I did the same practice with SOLMAN host it works fine and I didnt receive any error.
Please reply me. your any help will be appreciated greatly.
Regards
Naeem

Hi,
Preferebly PI should have it's own SLD. And SOLMAN could use PI's SLD.
Please check Installation guide and SLD Administration Guide from Service Market place before finalizing SLD architecture in your System landscape.
I guess SOLMAN will have only one Instance in system landscape. (Not three system landscape like Dev, Qa, Prod).
If you want to go ahead with your current SLD plan, then Change your SLD hostname in Exchange Profile of PI, to SOLMAN Host name.
Regards
Praveen K
Edited by: Praveen Kurni on Jul 7, 2011 6:12 PM

Can we assign more then one abap system to one bpc server?

Hi my question is short an d simple.
can we assign more then one abap system to one bpc server?
Regards Stefan

Stefan,
My understanding is that this is not possible. However, I believe you can have multiple BPC .NET servers and point them to different dialog instances of the same ABAP system. You would then put a load balancer in front of the .NET servers and requests will be distributed across the ABAP dialog instances.
Ethan

UME with ABAP AS and LDAP Datasource

Hello SDN´s
We have tried very hard for the last days configuring the ume-xml for the following scenario:
-     LDAP is used to authenticate the user
-     AS ABAP is used to store the roles of the user (because they automatically becomes groups in the portal)
- the portal and the ABAP-system are on different servers
Given facts:
1)     we canu2019t synchronize the roles of the ABAP system to the LDAP
2)     we have to use the open-LDAP for the authentication
3)     DataSources are readonly
4)     User can have similar or different userid´s on the DataSources (Mapping required)
Therefore, we read the user and account information from the LDAP and groups/roles form the ABAP AS.
Result:
a)     user with similar userid on LDAP and ABAP AS: These user were no longer able to log on to the portal
b)     user with different id´s (mapped) on LDAP and ABAP: Can log on
Questions:
-     Is it true that similar userid´s leads to inherent problems of the UME Persistence Manager?
-     Did we set up a wrong config-xml?
-     Is there any other way how we could authenticate to the LDAP and having the Roles of a user read from the ABAP system dynamically?
Thank you very much for your help
Sincerely, A. Hunziker

Hi Andre,
Not sure if my remarks below can help you but I do hope that it can shine you some light.
We have LDAP as our main UME, which is configured in our Portal7.0. This means that security groups created in LDAP are "replicated" into the Portal. We created Portal Roles which are assigned to the security groups created in LDAP. We also use SSO and it was setup via the SPNego Wizard (http://help.sap.com/saphelp_nw70/helpdata/EN/45/40a0de773a7527e10000000a114a6b/frameset.htm). This way, the user only needs to login via Windows and access the Portal without having to login (when users have the same Windows userID as that of their SAP ID). If the users have a different userID between Windows and SAP, then they do a user map under personalization of the Portal.
To connect our Portal to our backend systems, we created a reference system (http://help.sap.com/saphelp_nw70/helpdata/EN/89/6eb8deaf2f11d5993700508b6b8b11/frameset.htm) and we have our Portal certificates in all backend systems (http://help.sap.com/saphelp_nw70/helpdata/EN/d3/41c8efb31d11d5993800508b6b8b11/frameset.htm).
With the above, users have SSO from Windows to Portal and via the reference system, they can enjoy SSO as well into our backend systems.
Basically we have control what the users can see from the Portal (directly from LDAP security groups with users assigned to that) and what the user can do on backend is still maintain in the backend authorisation setup.
Hope that can help you.
Ray

Users mapping between EP and ABAP system

Hello
I'd like to ask for some guidance in my quest
Current situation looks like this:
I've configured UME in AS Java to work with LDAP as read only data source. Then I've configured SPNego to run SSO - It works, users from MS AD can log into portal.
Now I have application in WD which authorizes via EP/AD - works fine.
And next step is users mapping between AD and ABAP backend (serving some BAPI's for WD app)
I've found a bunch of help pages starting from
http://help.sap.com/saphelp_nwce711/helpdata/en/0b/d82c4142aef623e10000000a155106/frameset.htm
But somehow it's quite complicated to achieve this mapping. I've tried to set RFC destinations logon type to user mapping but without succes.
Can anyone point me to some more clear example or give path to configure this scenario? Is there a way of configuring this with NWA or some XML file editing is required?
Any help will be appreciated.
BTW: whole environment is in version 7.11
Best regards
Maciej

There is no equivalent to SPNEGO on the ABAP side.
If your goal is to propagate the user, then possible options are:
-> Wait for SAML 2.0 or invest now in a SAML 1.0 provider.
-> Use the same kerberos ticket for the EP as what your ABAP system will accept: route = SNC and 3rd party libraries.
-> Issue SAP logon tickets for the ABAP system from the EP, and use these in your WDA.
Another option is to expose the service with saved logon data in the ICF. If the service is just a wrapper for the BAPI, then you can also consider using trusted RFC between the service and the backend, but this might not be acceptable for your service.
I have only done experimental stuff with this and some of the above is not released yet. Also consider the consequences, even if it "does work"...
Cheers,
Julius

Error in UME configuration stage

Hi all,
I am installing SAP Netweaver with EHP1 Java application server as a central system.But I am stuck at the step UME Configuration .In UME congigration phase I 'am selecting option USE ABAP (so that administrators can manage users with transaction SU01 ) rather than JAVA Database ( default ).
At the next step of installation ,it is asking for ABAP connection and J2EE engine connection parameters like instance Host,communication user,Administratoe user,guest user.So after providing all these details when Iclick on next button ,it doesn't move to next stage ,also not throw any error message.
When I have checked sapinst_dev log in C:\Program Files\sapinst_instdir\NW701\AS-JAVA\ORA\CENTRAL directory ,its show me :
2011-05-20 11:50:27.939
 CJSlibModule::writeWarning_impl()
Execution of the command ""C:\Program Files\sapinst_instdir\NW701\AS-JAVA\ORA\CENTRAL\install\jlaunch.exe" UserCheck.jlaunch com.sap.security.tools.UserCheck "C:\Program Files\sapinst_instdir\NW701\AS-JAVA\ORA\CENTRAL\install\lib;C:\Program Files\sapinst_instdir\NW701\AS-JAVA\ORA\CENTRAL\install\sharedlib;C:\Program Files\sapinst_instdir\NW701\AS-JAVA\ORA\CENTRAL\install" -c sysnr=00 -c ashost=SAPEBSA1 -c client=100 -c user=SAPJSF -c XXXXXX -a checkOnly -u SAPJSF -p XXXXXX -user_type system -message_file UserCheck.message" finished with return code -3. Output:
Usage : C:\Program Files\sapinst_instdir\NW701\AS-JAVA\ORA\CENTRAL\install\jlaunch.exe [-options] <arg0> <arg1> ... <argn>
Launch the specified java program
options : [-file=<property file>] (default=jlaunch.properties)
* [-nodename=<node name>] (default=jlaunch)*
* [-app=<application name>] Standalone application*
* -> <property file> = <application name>.properties*
* -> <SAP profile> = <application name>.pfl*
* [pf=<SAP profile>] (default=jlaunch.pfl)*
* [-parent=<pid of the parent process>] (default=0)*
* [-tracefile=<filename>] (default=dev_jlaunch)*
Critical Error
Can't read program properties
-> Internal program error (rc = -1)
INFO 2011-05-20 11:50:27.955 [synxcfile.cpp:427]
 *CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)*
 lib=syslib module=syslib
Removed file C:\Program Files\sapinst_instdir\NW701\AS-JAVA\ORA\CENTRAL\dev_UserCheck.
TRACE 2011-05-20 11:50:27.955
NWException thrown: nw.ume.generalError:
. DIAGNOSIS: For more details see output of log file:
TRACE 2011-05-20 11:50:28.80 [iaxxdlghnd.cpp:131]
 CDialogHandler::doHandleDoc()
Dialog validator of dialog : d_nw_ume_standalone_abap
called by :|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CI_Instance|ind|ind|ind|ind|ci|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|javaconfig|0|NW_UME_Configuration|ind|ind|ind|ind|ume|0|NW_UME_Configuration_Standalone|ind|ind|ind|ind|0|0|askPasswords
returns false without any additional information.
TRACE 2011-05-20 11:50:28.80 [iaxxgenimp.cpp:1248]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
UserCheck JLAUNCH file :
UserCheck.Name = UserCheck
UserCheck.ClassPath = C:\Program Files\sapinst_instdir\NW701\AS-JAVA\ORA\CENTRAL\install\sharedlib\launcher.jar
UserCheck.mainclass = com.sap.engine.offline.OfflineToolStart
UserCheck.rootPath = C:\Program Files/sapinst_instdir/NW701/AS-JAVA/ORA/CENTRAL/
UserCheck.JavaPath = C:/j2sdk1.4.2_30-x64
Plese give me your valuaable advice.
Many Thanks,
Amit

Hi,
Here is your options:
1. Login to SAPEBSA1 with SAPJSF and password you provided in the SAPinst. If you are not able to login ... login with any other user like DDIC.
Change user type of SAPJSF to Dialog ( if user not exist then create user SAPJSF) and assign role 1. SAP_BC_JSF_COMMUNICATION_RO and 2. SAP_BC_JSF_COMMUNICATION.
Once you are able to login, then change user type to system and then try to continue in SAPinst.
-Sanjay

Java UME to ABAP backend

Can java UME support multiple ECC ABAP backends?
I looked at the UME configuration for a java instance and it seems as though there is a one to one relationship.
Is this a truly 1:1 relationship in UME - ABAP configuration.
Thanks
Weyland Yutani

That is strange advice...
CUA master is an ABAP logical system and Java SID is not client capable, it is the logical system itself. So it is 1 Java : 1 ABAP from the view of Java and n : 1 from the view of ABAP (with ALL consequences associated to it!)
If you add Logon Tickets to the scenario then you have 1 : 1 <--> 1 --> n (where n is anything) but I don't think that is Weyland's question, so my answer is irrelevant here.
Perhaps you are refering to the "circus solution" of creating an ABAP client for each Java system and provisioning them from the CUA?
That is however not a solution, but rather more like a Chuck Norris fighting against a fleet of battleships (except with a more realistic ending...
Enjoy the weekend,
Julius
Edited by: Julius Bussche on Aug 20, 2010 9:37 PM

UME configuration : datasource and logonticket

Hello,
Can somebody explain me or give infos on UME configuration for logonticket and datasource for SAP R/3. System : ABAP/JAVA on the same stack (NW2004s).
Thanks
Best regards

Hi,
 For logon tickets please, refer the link below.
http://help.sap.com/saphelp_nw2004s/helpdata/en/e8/6bc22a4686714d963e9efb77cfbcb5/frameset.htm
For dataSource ABAP configuration, you need to set the following properties in the configtool
ume.persistance.data_source_configuration = dataSourceConfiguration_abap.xml
r3.connection.master.ashost : <Backend server name>
r3.connection.master.client : <Client id>
r3.connection.master.sysnr : <Backend system number>
r3.connection.master.user : <communication user name> (the sapjsf or communication user which we created in backend system)
r3.connection.master.password : <communication user password> (it is the password of the com user which is in the backend system)
ume.login.guest_user.uniqueids : Guest user id (same as Guest, createed in the backend system)
login.ticket_portalid : yes (If administrator id length is more than 12 charcters ex: administrator)
 : No (If administrator id length is less than 12 charcters ex: j2ee_admin)
Thanks
R.Murali

How to allow login using email address (ALIAS) to Abap system

Hi,
we are developing some Abap Webdympro to logon to an Abap system, release Netweaver 731, in order to allow our end user to logon via Internet browser to this system.
So our Abap system is acting like a Portal system, but it's not a J2EE system, it's just a Netweaver Abap system with the following components installed:
SAP_BASIS
SAP_ABA
PI_BASIS
ST-PI
IW_BEP
SAP_BW
UI2_700
UI2_701
UI2_702
UI2_731
UI2_FND
UI2_SRVC
UI5_731
UISAPUI5
UI_INFRA
No SSO is configured on the ABAP system, and no connection to the LDAP directory is in place , and it is neither foresee.
In this moment we are able to login with the user-id of the user we created into the SU01, butt we would like to allow the access using the ALIAS of the users too.
The ALIAS of these users is like '[email protected]'.
We did some test but trying to logon we recive always the message:
"500 SAP Internal Server Error
ERROR: System logon form fields have invalid values (termination: ERROR_MESSAGE_STATE)"
On the network I'm able to find only post related to this issue using a J2EE portal, but nothing using an ABAP system as Portal.
Any idea ?
Regards

Hello Arul,
welcome to the SDN CRM Development forum.
1. I think you should clear the data with duplicate E-Mail adresses in the external tool.
2. Unsubscription could be done by a Marketing Attribute which could be set by using a Target Group which is created by Campaign Automation. Have a look at this Toppic. There is also a Best Practice avaliable at http://help.sap.com/bp_crmv340/CRM_DE/index.htm.
3. Also HTML or Simple text can be mained in a Marketing Attribute. You have to use different Mail Forms to which are sent to different Target groups.
Regards
Gregor

UME Configuration - Abap System as userstore, can it be reversed?

Similar Messages

Maybe you are looking for